DGS-6600-EQUIPMENT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
43

chassisControlModuleLEDInfoTable

table
.1.3.6.1.4.1.171.10.120.100.1.2.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk chassisControlModuleLEDInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-6600-EQUIPMENT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-6600-EQUIPMENT-MIB::chassisControlModuleLEDInfoTable' 
TBD.
chassisControlModuleLEDInfoEntry row .1.3.6.1.4.1.171.10.120.100.1.2.1.1.1
TBD.
Indexes
Column Syntax OID
chassisControlModuleLEDInfoIndex
This object indicates the slot index of Control Module.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.1
chassisControlModuleLEDInfoConsole
This object indicates the console type. There are two different interfaces:
1: RS232.
2: USB.
Enumeration
Enumerated Values:
1rs232
2usb
 .1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.2
chassisControlModuleLEDInfoMaster
This object indicates whether this control module is master or not?
1: This control module is active CM.
2: This control module is standby CM.
Enumeration
Enumerated Values:
1active
2standby
 .1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.3
chassisControlModuleLEDInfoCPUUtilization
This object indicates the CPU utilization(in percentage) of this control module.
Enumeration
Enumerated Values:
0zero-LED
1one-LED
2two-LEDs
3three-LEDs
4four-LEDs
5five-LEDs
6six-LEDs
7seven-LEDs
8eight-LEDs
 .1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.4
chassisControlModuleLEDInfoMgmtPortStatus
This object indicates the management port status.
Enumeration
Enumerated Values:
1off
2steady-green
3blinking-green
 .1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.5
chassisControlModuleLEDInfoMgmtPortSpeed
This object indicates the management port link speed.
Enumeration
Enumerated Values:
1link-0
2link-100
3link-1000
 .1.3.6.1.4.1.171.10.120.100.1.2.1.1.1.6

chassisPowerInfoTable

table
.1.3.6.1.4.1.171.10.120.100.1.2.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk chassisPowerInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-6600-EQUIPMENT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-6600-EQUIPMENT-MIB::chassisPowerInfoTable' 
TBD.
chassisPowerInfoEntry row .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1
TBD.
Indexes
Column Syntax OID
chassisPowerIndex
This object indicates the PSU index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.1
chassisPowerExist
This object indicates whether the specified PSU is exist or not.
1: The PSU is not exist.
2: The PSU is installed.
Enumeration
Enumerated Values:
1empty
2exist
 .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.2
chassisPowerAlive
This object indicates whether the specified PSU is alive or not.
1: The PSU is not available.
2: The PSU is working normally.
Enumeration
Enumerated Values:
1failed
2in-operation
 .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.4
chassisPowerVoltage
This object indicates the output voltage(V) of the specified PSU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.5
chassisPowerCurrent
This object indicates the output current(mA) of the specified PSU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.6
chassisPowerPowerWatt
This object indicates the output power(W) of the specified PSU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.7
chassisPowerFanSpeed
This object indicates the internal fan speed(rpm) of specified PSU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.120.100.1.2.2.1.1.8

chassisFanInfoTable

table
.1.3.6.1.4.1.171.10.120.100.1.2.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk chassisFanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-6600-EQUIPMENT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-6600-EQUIPMENT-MIB::chassisFanInfoTable' 
TBD.
chassisFanInfoEntry row .1.3.6.1.4.1.171.10.120.100.1.2.3.2.1
TBD.
Indexes
Column Syntax OID
chassisFanIndex
This object indicates the fan tray index.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.120.100.1.2.3.2.1.1
chassisFanStatus
This object indicates the fan status(ok or failed).
Enumeration
Enumerated Values:
1failed
2ok
 .1.3.6.1.4.1.171.10.120.100.1.2.3.2.1.2
chassisFanSpeed
This object indicates the fan speed in RPM.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.120.100.1.2.3.2.1.3

chassisSlotInfoTable

table
.1.3.6.1.4.1.171.10.120.100.1.2.4.1 · 1 row entry · 12 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk chassisSlotInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-6600-EQUIPMENT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-6600-EQUIPMENT-MIB::chassisSlotInfoTable' 
TBD.
chassisSlotInfoEntry row .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1
TBD.
Indexes
Column Syntax OID
chassisSlotIndex
This object indicates the slot index.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.1
chassisSlotState
This object indicates the slot state:
1: The slot has no card installed.
2: The card which installed at this slot is not powered up.
3: The card which installed at this slot is failed.
4: The card which installed at thi…
Enumeration
Enumerated Values:
1empty
2no-power
3failed
4booting
5in-operation
 .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.2
chassisSlotLEDPoEModeEnabled
This object indicates whether the PoE mode is enabled or not?
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.3
chassisSlotModel
This object indicates the card model name.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.4
chassisSlotSerialNumber
This object indicates the serial number of the installed card.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.5
chassisSlotHwVersion
This object indicates the HW version of the installed card.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.6
chassisSlotPCBAVersion
This object indicates the PCBA version of the installed card.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.7
chassisSlotBootloaderVersion
This object indicates the PCBA version of the installed card.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.8
chassisSlotRuntimeVersion
This object indicates the runtime version of the installed card.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.9
chassisSlotCPLDVersion
This object indicates the CPLD version of the installed card.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.10
chassisSlotFirsMacAddress
This object indicates the first MAC address of the installed card.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.11
chassisSlotNumberOfMacAddress
This object indicates the number of MAC address of the installed card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.120.100.1.2.4.1.1.12

chassisTemperatureInfoTable

table
.1.3.6.1.4.1.171.10.120.100.1.2.5.1 · 1 row entry · 10 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk chassisTemperatureInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-6600-EQUIPMENT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-6600-EQUIPMENT-MIB::chassisTemperatureInfoTable' 
TBD.
chassisTemperatureInfoEntry row .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1
TBD.
Indexes
Column Syntax OID
chassisTemperatureSlotIndex
This object indicates the slot number which is currently querying.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.1
chassisTemperatureInletCurrent
This object displays the current temperature of Inlet sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.2
chassisTemperatureInletOverheat
This object displays the overheat threshold of Inlet sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.3
chassisTemperatureInletHeatdown
This object displays the heatdown threshold of Inlet sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.4
chassisTemperatureCenterCurrent
This object displays the current temperature of Center sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.5
chassisTemperatureCenterOverheat
This object displays the overheat threshold of Center sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.6
chassisTemperatureCenterHeatdown
This object displays the heatdown threshold of Center sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.7
chassisTemperatureOutletCurrent
This object displays the current temperature of Outlet sensor.
The string N/A will be displayed to indicate that the card has no this sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.8
chassisTemperatureOutletOverheat
This object displays the overheat threshold of Outlet sensor.
The string N/A will be displayed to indicate that the card has no this sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.9
chassisTemperatureOutletHeatdown
This object displays the outlet threshold of Outlet sensor.
The string N/A will be displayed to indicate that the card has no this sensor.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.5.1.1.10

chassisPortLEDInfoTable

table
.1.3.6.1.4.1.171.10.120.100.1.2.6.1 · 1 row entry · 5 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk chassisPortLEDInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-6600-EQUIPMENT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-6600-EQUIPMENT-MIB::chassisPortLEDInfoTable' 
TBD.
chassisPortLEDInfoEntry row .1.3.6.1.4.1.171.10.120.100.1.2.6.1.1
TBD.
Indexes
Column Syntax OID
chassisPortLEDIFIndex
This object indicates the interface index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.1
chassisPortLEDIFName
This object indicates the interface name.
RFC1213-MIBDisplayString .1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.2
chassisPortLEDStatus
This object indicates the port LED status:
1: The port LED status of the interface index is off.
2: The port LED status of the interface index is steady-amber.
3: The port LED status of the interface index is steady-gr…
Enumeration
Enumerated Values:
1off
2steady-amber
3steady-green
4blinking-amber
5blinking-green
 .1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.3
chassisPortLEDMode
This object indicates the port LED mode:
1: The port LED is in Ethernet mode.
2: The poer LED is in PoE mode.
Enumeration
Enumerated Values:
1ethernet
2poe
 .1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.4
chassisPortLEDMediumType
This object indicates the port LED medium type:
1: The medium type of port LED is copper.
2: The medium type of port LED is fiber.
Enumeration
Enumerated Values:
1copper
2fiber
 .1.3.6.1.4.1.171.10.120.100.1.2.6.1.1.5