DGS-3710-12C-L3MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
30

swL3IpCtrlTable

table
.1.3.6.1.4.1.171.11.102.1.5.3.2.1.3 · 1 row entry · 14 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swL3IpCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3710-12C-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3710-12C-L3MGMT-MIB::swL3IpCtrlTable' 
This table contains IP interface information.
swL3IpCtrlEntry row .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1
A list of information about a specific IP interface.
Indexes
Column Syntax OID
swL3IpCtrlInterfaceName
This object indicates the name of the IP interface.
SNMPv2-TCDisplayString
Constraints:
range: 1-12
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.1
swL3IpCtrlIfIndex
This object uniquely identifies the IP interface number in the
swL3IpCtrlTable.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.2
swL3IpCtrlIpAddr
The IP address of the interface. This object only can take the
value of the unicast IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.3
swL3IpCtrlIpSubnetMask
The IP net mask for this interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.4
swL3IpCtrlVlanName
This object indicates the IP control entry's VLAN name. The
VLAN name in each entry must be unique in the IP Control Table.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.5
swL3IpCtrlMode
This object indicates the IP operation mode.

other(1) - This entry is currently in use but the conditions under
which it will remain are determined by each of the following values.
bootp(3) - The I…
Enumerationr/w
Enumerated Values:
1other
3bootp
4dhcp
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.8
swL3IpCtrlAdminState
The state of the IP interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.9
swL3IpCtrlIpv4AdminState
The IPv4 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.10
swL3IpCtrlIpv6AdminState
The IPv6 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.12
swL3IpCtrlIpv6LinkLocalAddress
The IPv6 link local address for this interface.
Ipv6Address
Type Constraints:
range: 16
Description:
This data type is used to model IPv6 addresses.
This is a binary string of 16 octets in network
byte-order.
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.14
swL3IpCtrlIpv6LinkLocalPrefixLen
The IPv6 prefix length for this IPv6 link local address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.15
swL3IpCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.16
swL3IpCtrlIpv6LinkLocalAutoState
The state of the IPv6 link local auto.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.17
swL3IpCtrlDhcpv6ClientState
The state of the Dhcpv6 Client.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.3.1.20

swL3Ipv6CtrlTable

table
.1.3.6.1.4.1.171.11.102.1.5.3.2.1.4 · 1 row entry · 2 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swL3Ipv6CtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3710-12C-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3710-12C-L3MGMT-MIB::swL3Ipv6CtrlTable' 
This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry row .1.3.6.1.4.1.171.11.102.1.5.3.2.1.4.1
A list of IPv6 information about a specific IP interface.
Indexes
Column Syntax OID
swL3Ipv6CtrlInterfaceName
This object indicates the name of the IP interface.
SNMPv2-TCDisplayString
Constraints:
range: 1-12
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.4.1.1
swL3Ipv6CtrlNsRetransTimer
Neighbor solicitation's retransmit timer.
The unit is set in milliseconds.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.4.1.3

swL3Ipv6AddressCtrlTable

table
.1.3.6.1.4.1.171.11.102.1.5.3.2.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swL3Ipv6AddressCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3710-12C-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3710-12C-L3MGMT-MIB::swL3Ipv6AddressCtrlTable' 
This table contains IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry row .1.3.6.1.4.1.171.11.102.1.5.3.2.1.5.1
A list of information about a specific IPv6 address.
Indexes
Column Syntax OID
swL3Ipv6AddressCtrlInterfaceName
This object indicates the name of the IP interface.
SNMPv2-TCDisplayString
Constraints:
range: 1-12
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.5.1.1
swL3Ipv6Address
Specify the IPv6 address.
Ipv6Address
Type Constraints:
range: 16
Description:
This data type is used to model IPv6 addresses.
This is a binary string of 16 octets in network
byte-order.
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.5.1.2
swL3Ipv6AddressCtrlPrefixLen
Indicates the prefix length of this IPv6 address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.5.1.3
swL3Ipv6AddressCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.5.1.8
swL3Ipv6AddressCtrlAddressType
This object indicates the type of the IPv6 address.

manual(1): the IPv6 address is configured by user.
dhcpv6(2): the IPv6 address is assigned by DHCPv6 server.
stateless(3): the IPv6 address is assigned …
Enumeration
Enumerated Values:
1manual
2dhcpv6
3stateless
 .1.3.6.1.4.1.171.11.102.1.5.3.2.1.5.1.9

swL3IpStaticRouteTable

table
.1.3.6.1.4.1.171.11.102.1.5.3.2.5 · 1 row entry · 6 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swL3IpStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3710-12C-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3710-12C-L3MGMT-MIB::swL3IpStaticRouteTable' 
This entity's IP static routing table.
swL3IpStaticRouteEntry row .1.3.6.1.4.1.171.11.102.1.5.3.2.5.1
A particular route to a particular destination, under a particular policy.
Once an entry is built, it shouldn't be modified. That is, it just supports a
create or delete action.
Indexes
Column Syntax OID
swL3IpStaticRouteDest
The destination IP address of this route.

This object will not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object with a value o…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.102.1.5.3.2.5.1.1
swL3IpStaticRouteMask
Indicates that the mask is to be logical-ANDed with
the destination address before being compared to
the value in the swL3IpStaticRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent c…
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.102.1.5.3.2.5.1.2
swL3IpStaticRouteBkupState
The routing state for this route. The value should be
primary (1) or backup (2).
Enumerationr/w
Enumerated Values:
1primary
2backup
 .1.3.6.1.4.1.171.11.102.1.5.3.2.5.1.3
swL3IpStaticRouteNextHop
On remote routes, the address of the next system
route; Otherwise, 0.0.0.0.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.102.1.5.3.2.5.1.4
swL3IpStaticRouteMetric
The routing metric for this route.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.102.1.5.3.2.5.1.5
swL3IpStaticRouteStatus
This object indicates the status of this entry.

other (1) - This entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.102.1.5.3.2.5.1.6

swL3RelayDnsCtrlTable

table
.1.3.6.1.4.1.171.11.102.1.5.3.3.2.6 · 1 row entry · 3 columns
Open in standard view
Uses the d-link variant from /opt/observium/mibs/d-link.
Command help
Walk swL3RelayDnsCtrlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-3710-12C-L3MGMT-MIB' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-3710-12C-L3MGMT-MIB::swL3RelayDnsCtrlTable' 
This table displays the current DNS relay static table.
swL3RelayDnsCtrlEntry row .1.3.6.1.4.1.171.11.102.1.5.3.3.2.6.1
A list of information display the current DNS relay static
table.
Indexes
Column Syntax OID
swL3RelayDnsCtrlDomainName
The domain name of the entry.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.171.11.102.1.5.3.3.2.6.1.1
swL3RelayDnsCtrlIpAddr
The IP address of the entry.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.102.1.5.3.3.2.6.1.2
swL3RelayDnsCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.102.1.5.3.3.2.6.1.3