DGS-3420-52P-L3MGMT-MIB Table View

This table contain IP interface information.

swL3IpCtrlEntry row .1.3.6.1.4.1.171.11.119.5.3.2.1.3.1

A list of information about a specific IP interface.

Indexes

swL3IpCtrlInterfaceName

Column	Syntax	OID
swL3IpCtrlInterfaceName This object indicates the name of the IP interface.	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.1
swL3IpCtrlIfIndex This object uniquely identifies the IP interface number in the swL3IpCtrlTable.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.2
swL3IpCtrlIpAddr The IP address of the interface. This object only can take the value of the unicast IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.3
swL3IpCtrlIpSubnetMask The IP net mask for this interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.4
swL3IpCtrlVlanName This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.5
swL3IpCtrlProxyArp This object indicates enable/disable of the proxy ARP function for IPv4.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.6
swL3IpCtrlSecondary When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.7
swL3IpCtrlMode This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The I…	Enumerationr/w Enumerated Values: 1 other 3 bootp 4 dhcp	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.8
swL3IpCtrlAdminState The state of the IP interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.9
swL3IpCtrlIpv4AdminState The IPv4 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.10
swL3IpCtrlIpv6AdminState The IPv6 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.12
swL3IpCtrlIpv6LinkLocalAddress The IPv6 link local address for this interface.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.14
swL3IpCtrlIpv6LinkLocalPrefixLen The IPv6 prefix length for this IPv6 link local address.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.15
swL3IpCtrlState This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.16
swL3IpCtrlIpv6LinkLocalAutoState The state of the IPv6 link local auto.	Enumerationr/w Enumerated Values: 1 other 2 enabled 3 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.17
swL3IpCtrlLocalProxyArp This object indicates enable/disable of the local proxy ARP function for IPv4.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.18
swL3IpCtrlIpMtu The MTU is the largest size of the IP datagram which may be transferred using a specific data link connection. The MTU value is a design parameter of a LAN and is a mutually agreed value (i.e. both ends of a link agree …	bytesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.19
swL3IpCtrlDhcpv6ClientState The state of the Dhcpv6 Client.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.20
swL3IpCtrlIpDirectedBroadcastState The state of the IP Directed Broadcast.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.21
swL3IpCtrlIpDhcpOption12State Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.22
swL3IpCtrlIpDhcpOption12HostName Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior ch…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.23
swL3IpCtrlDhcpv6ClientPDState The state of the Dhcpv6 Client PD.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.24
swL3IpCtrlDhcpv6ClientPDPrefixName This object indicates the name for the DHCPv6 Client PD. If the swL3IpCtrlDhcpv6ClientPDState is disabled, this object will be clear and can't write.	OctetStringr/w Constraints: range: 0-12	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.25
swL3IpCtrlDhcpv6ClientPDPrefix The IPv6 prefix obtained form delegation router.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.26
swL3IpCtrlDhcpv6ClientPDPrefixLen The IPv6 prefix length for the prefix obtained from delegation router.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.119.5.3.2.1.3.1.27

This table contains IPv6 information of an IP interface.

swL3Ipv6CtrlEntry row .1.3.6.1.4.1.171.11.119.5.3.2.1.4.1

A list of IPv6 information about a specific IP interface.

Indexes

swL3Ipv6CtrlInterfaceName

Column	Syntax	OID
swL3Ipv6CtrlInterfaceName This object indicates the name of the IP interface.	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.1
swL3Ipv6CtrlMaxReassmblySize Maximum Reassembly Size of the IP interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.2
swL3Ipv6CtrlNsRetransTimer Neighbor solicitation's retransmit timer. The unit is set in milliseconds.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.3
swL3Ipv6CtrlRaState Neighbor solicited state.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.5
swL3Ipv6CtrlRaMinRtrAdvInterval The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInt…	Integer32r/w Constraints: range: 3-1350	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.6
swL3Ipv6CtrlRaMaxRtrAdvInterval The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds.	Integer32r/w Constraints: range: 4-1800	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.7
swL3Ipv6CtrlRaLifeTime Indicates the lifetime of the router as the default router.	Integer32r/w Constraints: range: 0-9000	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.8
swL3Ipv6CtrlRaReachableTime Indicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation.	Integer32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.9
swL3Ipv6CtrlRaRetransTime Indicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.10
swL3Ipv6CtrlRaHopLimit Indicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.11
swL3Ipv6CtrlRaManagedFlag When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.12
swL3Ipv6CtrlRaOtherConfigFlag When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.4.1.13

This table contains IPv6 address information for each IP interface.

swL3Ipv6AddressCtrlEntry row .1.3.6.1.4.1.171.11.119.5.3.2.1.5.1

A list of information about a specific IPv6 address.

Indexes

swL3Ipv6AddressCtrlInterfaceName swL3Ipv6Address swL3Ipv6AddressCtrlPrefixLen

Column	Syntax	OID
swL3Ipv6AddressCtrlInterfaceName This object indicates the name of the IP interface.	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.1
swL3Ipv6Address Specify the IPv6 address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.2
swL3Ipv6AddressCtrlPrefixLen Indicates the prefix length of this IPv6 address.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.3
swL3Ipv6AddressCtrlPreferredLifeTime Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xfffffff…	Unsigned32r/w Constraints: range: 0-4294967294	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.4
swL3Ipv6AddressCtrlValidLifeTime Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff.	Unsigned32r/w Constraints: range: 0-4294967294	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.5
swL3Ipv6AddressCtrlOnLinkFlag When enabled, the address implied by the specified prefix is available on the link where the RA message is received.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.6
swL3Ipv6AddressCtrlAutonomousFlag When enabled, the specified prefix will be used to create an autonomous address configuration.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.7
swL3Ipv6AddressCtrlState This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.8
swL3Ipv6AddressCtrlAddressType This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router adver…	Enumeration Enumerated Values: 1 manual 2 dhcpv6 3 stateless	.1.3.6.1.4.1.171.11.119.5.3.2.1.5.1.9

This table contain the information of the IPv6 address which based on DHCPv6 client PD.

swL3Ipv6DHCPv6CPDAddrCtrlEntry row .1.3.6.1.4.1.171.11.119.5.3.2.1.6.1

A list of information about a specific DHCPv6 Client PD IPv6 address.

Indexes

swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName swL3Ipv6DHCPv6CPDAddrCtrlPrefixName swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen

Column	Syntax	OID
swL3Ipv6DHCPv6CPDAddrCtrlInterfaceName This object indicates the name of the IP interface.	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.119.5.3.2.1.6.1.1
swL3Ipv6DHCPv6CPDAddrCtrlPrefixName This object indicates the name of the prefix based on which the IPv6 address will be generate.	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.119.5.3.2.1.6.1.2
swL3Ipv6DHCPv6CPDAddrCtrlIPv6addr Specify the suffix of the IPv6 address.	IPV6-TCIpv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.11.119.5.3.2.1.6.1.3
swL3Ipv6DHCPv6CPDAddrCtrlPrefixLen Indicates the prefix length of this IPv6 address.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.119.5.3.2.1.6.1.4
swL3Ipv6DHCPv6CPDAddrCtrlState This variable displays the status of the entry. The status is used for creating and deleting instances of the objects in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.2.1.6.1.5

This table contains loopback IP interface information.

swL3LoopBackIpCtrlEntry row .1.3.6.1.4.1.171.11.119.5.3.2.1.8.1

A list of information about a specific loopback IP interface.

Indexes

swL3LoopBackIpCtrlInterfaceName

Column	Syntax	OID
swL3LoopBackIpCtrlInterfaceName This object indicates the name of the loopback IP interface.	OctetString Constraints: range: 1-12	.1.3.6.1.4.1.171.11.119.5.3.2.1.8.1.1
swL3LoopBackIpCtrlIfIndex This object uniquely identifies the loopback IP interface number in the swL3LoopBackIpCtrlTable.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.119.5.3.2.1.8.1.2
swL3LoopBackIpCtrlIpAddr The IP address of the loopback interface. This object only can take the value of the unicast IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.1.8.1.3
swL3LoopBackIpCtrlIpSubnetMask The IP net mask for this loopback interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.1.8.1.4
swL3LoopBackIpCtrlAdminState The state of the loopback IP interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.119.5.3.2.1.8.1.5
swL3LoopBackIpCtrlRowStatus This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.2.1.8.1.6

A table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets.

swL3IpFdbInfoEntry row .1.3.6.1.4.1.171.11.119.5.3.2.2.1.1

Information about a specific IP address for which the bridge
has some forwarding and/or filtering information.

Indexes

swL3IpFdbInfoIpAddr

Column	Syntax	OID
swL3IpFdbInfoIpAddr A IP address for which switch has forwarding and/or filtering information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.2.1.1.1
swL3IpFdbInfoIpSubnetMask A IP net mask for this interface for which the switch has forwarding and/or filtering information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.2.1.1.2
swL3IpFdbInfoPort Either the value '0', or the port number of the port on which packets having an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.119.5.3.2.2.1.1.3
swL3IpFdbInfoType The status of this entry.	Enumeration Enumerated Values: 1 other 2 static 3 dynamic	.1.3.6.1.4.1.171.11.119.5.3.2.2.1.1.4

This entity's IP static Routing table.

swL3IpStaticRouteEntry row .1.3.6.1.4.1.171.11.119.5.3.2.5.1

A particular route to a particular destination, under a particular policy.
Once an entry is built,it shouldn't be modified.That is,it just supports
create and delete actions.

Indexes

swL3IpStaticRouteDest swL3IpStaticRouteMask swL3IpStaticRouteNextHop

Column	Syntax	OID
swL3IpStaticRouteDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a valu…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.1
swL3IpStaticRouteMask Indicate the mask to be logical-AND with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent c…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.2
swL3IpStaticRouteBkupState The routing state for this route.The value SHOULD be primary(1), backup(2) or none(3).	Enumerationr/w Enumerated Values: 1 primary 2 backup 3 none	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.3
swL3IpStaticRouteNextHop Specifies the IP address for the next hop router. An IP address of 255.255.255.255 denotes a Null interface as the next hop.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.4
swL3IpStaticRouteMetric Specifies the routing metric for this route.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.5
swL3IpStaticRouteStatus This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid 4 active 5 inActive	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.6
swL3IpStaticRouteWeight Specifies the weight value. Used for the weighted multipath.	Integer32r/w Constraints: range: 0-4	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.7
swL3IpStaticRouteInterfaceName Specifies the name of the IP interface.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.119.5.3.2.5.1.8

This entity's IPv4 static Routing tunnel table.

swL3IpStaticRouteTunnelEntry row .1.3.6.1.4.1.171.11.119.5.3.2.7.1

A particular route to a particular destination, under a particular policy.
Once an entry is built, it cannot be modified. That is, it just supports create
and delete actions.

Indexes

swL3IpStaticRouteDest swL3IpStaticRouteMask swL3IpStaticRouteTunnelInterfaceName

Column	Syntax	OID
swL3IpStaticRouteTunnelInterfaceName This object indicates the name of the IP tunnel interface.	OctetString Constraints: range: 0-12	.1.3.6.1.4.1.171.11.119.5.3.2.7.1.1
swL3IpStaticRouteTunnelRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.2.7.1.2

This table displays the current DNS relay static table.

swL3RelayDnsCtrlEntry row .1.3.6.1.4.1.171.11.119.5.3.3.3.6.1

A list of information display the current DNS relay static
table.

Indexes

swL3RelayDnsCtrlDomainName swL3RelayDnsCtrlIpAddr

Column	Syntax	OID
swL3RelayDnsCtrlDomainName The domain name of the entry.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.171.11.119.5.3.3.3.6.1.1
swL3RelayDnsCtrlIpAddr The IP address of the entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.3.3.6.1.2
swL3RelayDnsCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.171.11.119.5.3.3.3.6.1.3

Route redistribution allows routers on the network that are 
running different routing protocols to exchange routing 
information. This is accomplished by comparing the routes stored
in the varios routers' routing tables and assigning appropriate
metrics. This information is then exchanged among the various 
routers according to the individual routers current routing 
protocol.

swL3RouteRedistriEntry row .1.3.6.1.4.1.171.11.119.5.3.5.1

A list of information displaying the route redistribution table.

Indexes

swL3RouteRedistriSrcProtocol swL3RouteRedistriDstProtocol

Column	Syntax	OID
swL3RouteRedistriSrcProtocol Allows the selection of the protocol of the source device.	Enumeration Enumerated Values: 1 other 2 rip 3 ospf 4 static 5 local 6 bgp	.1.3.6.1.4.1.171.11.119.5.3.5.1.1
swL3RouteRedistriDstProtocol Allows the selection of the protocol of the destination device.	Enumeration Enumerated Values: 1 other 2 rip 3 ospf 6 bgp	.1.3.6.1.4.1.171.11.119.5.3.5.1.2
swL3RouteRedistriType Allows the selection of one of the methods for calculating the metric value.	Enumerationr/w Enumerated Values: 1 other 2 all 3 type-1 4 type-2 5 internal 6 external 7 inter-E1 8 inter-E2 9 extType1 10 extType2	.1.3.6.1.4.1.171.11.119.5.3.5.1.3
swL3RouteRedistriMetric Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.119.5.3.5.1.4
swL3RouteRedistriRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.5.1.5

Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'swL3vrrpOperEntry' items.

swL3VrrpOperEntry row .1.3.6.1.4.1.171.11.119.5.3.14.1.1

An entry in the vrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.

Rows in the ta…

Indexes

swL3VrrpOperIfIndex swL3VrrpOperVrId

Column	Syntax	OID
swL3VrrpOperIfIndex The ifIndex value of the interface for which VRRP is enabled.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.1
swL3VrrpOperVrId This object contains the Virtual Router Identifier (VRID).	VrId Type Constraints: range: 1..255	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.2
swL3VrrpOperVirtualMacAddr The virtual MAC address of the virtual router. Although this object can be derived from the 'swL3VrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRR…	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.3
swL3VrrpOperState The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup'…	Enumeration Enumerated Values: 1 initialize 2 backup 3 master	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.4
swL3VrrpOperAdminState This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `swL3VrrpOperP…	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.5
swL3VrrpOperPriority This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.6
swL3VrrpOperMasterIpAddr The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.7
swL3VrrpOperCriticalIpAddr In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `swL3VrrpOperMasterIpAddr', should the virtual router transition from backup …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.8
swL3VrrpOperCheckCriticalIpState Critical IP state.	Enumerationr/w Enumerated Values: 0 other 1 disabled 2 enabled	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.9
swL3VrrpOperAuthType Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on th…	Enumerationr/w Enumerated Values: 1 noAuthentication 2 simpleTextPassword 3 ipAuthenticationHeader	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.10
swL3VrrpOperAuthKey The Authentication Key. This object is set according to the value of the 'swL3VrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent wil…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.11
swL3VrrpOperAdvertisementInterval The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements.	secondsInteger32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.12
swL3VrrpOperPreemptMode Controls whether a higher priority virtual router will preempt a lower priority master.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.13
swL3VrrpOperVirtualRouterUpTime This is the value of the `sysUpTime' object when this virtual router (i.e., the `swL3VrrpOperState') transitioned out of `initialized'.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.14
swL3VrrpOperVirtualIpAddr The assigned IP addresses that a virtual router is responsible for backing up.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.15
swL3VrrpOperRowStatus The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corres…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.14.1.1.16

IPv6 Route redistribution allows routers on the network that are 
running different routing protocols to exchange routing 
information. This is accomplished by comparing the routes stored
in the varios routers' routing tables and assigning appropriate
metrics. This information is then exchanged among the various 
routers according to the individual routers current routing 
protocol.

swL3Route6RedistriEntry row .1.3.6.1.4.1.171.11.119.5.3.20.1

A list of information displaying the IPv6 route redistribution table.

Indexes

swL3Route6RedistriSrcProtocol swL3Route6RedistriDstProtocol

Column	Syntax	OID
swL3Route6RedistriSrcProtocol Allows the selection of the protocol of the source device.	Enumeration Enumerated Values: 1 local 2 static 3 ripng 4 ospfv3	.1.3.6.1.4.1.171.11.119.5.3.20.1.1
swL3Route6RedistriDstProtocol Allows the selection of the protocol of the destination device.	Enumeration Enumerated Values: 1 ripng 2 ospfv3	.1.3.6.1.4.1.171.11.119.5.3.20.1.2
swL3Route6RedistriType Allows the selection of one of the methods for calculating the metric value.	Enumerationr/w Enumerated Values: 1 type-1 2 type-2 3 all	.1.3.6.1.4.1.171.11.119.5.3.20.1.3
swL3Route6RedistriMetric Allows the entry of an OSPFv3 interface cost. This is analogous to a Hop Count in the RIPng routing protocol. The value '0' indicates default value.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.119.5.3.20.1.4
swL3Route6RedistriRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.119.5.3.20.1.5