DGS-1100-06ME-AX Table View

A table to control the port specific parameters of the device like speed,
duplex mode, etc.

sysPortCtrlEntry row .1.3.6.1.4.1.171.10.134.1.1.1.13.1

An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.

Indexes

sysPortCtrlIndex sysPortCtrlMediumType

Column	Syntax	OID
sysPortCtrlIndex Interface index of the port for the configuration in this entry applies.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.1
sysPortCtrlMediumType This object indicates the port type: fiber 1G/100M or copper.	Enumeration Enumerated Values: 100 copper 101 fiber	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.2
sysPortCtrlSpeed Configures interface speed.	Enumerationr/w Enumerated Values: 1 rate1000M-Full 2 rate100M-Full 3 rate100M-Half 4 rate10M-Full 5 rate10M-Half 6 auto 7 disable	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.3
sysPortCtrlOperStatus The port's operating speed state.	Enumeration Enumerated Values: 1 down 2 rate1000M-Full 3 rate100M-Full 4 rate100M-Half 5 rate10M-Full 6 rate10M-Half	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.4
sysPortCtrlMDI Configures interface auto/mdi/mdix mode. The default setting is Auto.	Enumerationr/w Enumerated Values: 1 auto 2 mdi 3 mdix	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.5
sysPortCtrlFlowControl Enables / disables flow control for the interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.6
sysPortCtrlFlowControlOper The link parner negotiate port's operating flow control state.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.7
sysPortCtrlType The port's media type.	Enumeration Enumerated Values: 1 fastethernet 2 gigabitethernet 3 fiberwith100Base-and-1000BaseSFPModule	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.8
sysPortCtrlCapability The port's capability advertised.	Bitsr/w Enumerated Values: 0 rate10-half 1 rate10-full 2 rate100-half 3 rate100-full 4 reserve 5 rate1000-full	.1.3.6.1.4.1.171.10.134.1.1.1.13.1.9

The port description table.

sysPortDescriptionEntry row .1.3.6.1.4.1.171.10.134.1.1.1.14.1

The port description entry.

Indexes

sysPortDescIndex sysPortDescMediumType

Column	Syntax	OID
sysPortDescIndex This object indicates the port index.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.10.134.1.1.1.14.1.1
sysPortDescMediumType This object indicates the port type: fiber 1G/100M or copper.	Enumeration Enumerated Values: 100 copper 101 fiber	.1.3.6.1.4.1.171.10.134.1.1.1.14.1.2
sysPortDescString This object indicates the port description.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.171.10.134.1.1.1.14.1.3

The port error table.

sysPortErrEntry row .1.3.6.1.4.1.171.10.134.1.1.1.15.1

A list of information for the err port of the device.

Indexes

sysPortErrPortIndex

Column	Syntax	OID
sysPortErrPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.10.134.1.1.1.15.1.1
sysPortErrPortState This object decides whether the port state is enabled or disabled.	Enumeration Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.171.10.134.1.1.1.15.1.2
sysPortErrPortStatus This object decides whether the PortStatus is err-disabled.	Enumeration Enumerated Values: 1 other 2 err-disabled	.1.3.6.1.4.1.171.10.134.1.1.1.15.1.3
sysPortErrPortReason This object decides whether the PortStatus is LBD.	Enumeration Enumerated Values: 1 lbd	.1.3.6.1.4.1.171.10.134.1.1.1.15.1.4

A list of interface entries.

ipifV6AddressEntry row .1.3.6.1.4.1.171.10.134.1.1.2.7.14.1

An entry containing management information applicable
to a particular interface.

Indexes

ipifV6AddressMainIndex ipifV6AddressIpAddr ipifV6AddressIpPrefix

Column	Syntax	OID
ipifV6AddressMainIndex The index of this IPv6 entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.10.134.1.1.2.7.14.1.1
ipifV6AddressIpAddr The ip address of this IPv6 entry.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.2.7.14.1.2
ipifV6AddressIpPrefix The ip prefix of this IPv6 entry.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.171.10.134.1.1.2.7.14.1.3
ipifV6AddressIpType The ip type of this IPv6 entry.	Enumeration Enumerated Values: 1 unicast 2 anycast 3 linklocal	.1.3.6.1.4.1.171.10.134.1.1.2.7.14.1.4
ipifV6AddressRowStatus The status of an entry in the Multi Interface Table. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.2.7.14.1.5

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

dot1qVlanEntry row .1.3.6.1.4.1.171.10.134.1.1.7.6.1

Information for a VLAN configured into the
device by (local or network) management.

Indexes

dot1qVlanName

Column	Syntax	OID
dot1qVlanName An administratively assigned string, which may be used to identify the VLAN.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.171.10.134.1.1.7.6.1.1
dot1qVlanEgressPorts The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVR…	PortListr/w	.1.3.6.1.4.1.171.10.134.1.1.7.6.1.2
dot1qVlanForbiddenPorts The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar contro…	PortList	.1.3.6.1.4.1.171.10.134.1.1.7.6.1.3
dot1qVlanUntaggedPorts The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There …	PortListr/w	.1.3.6.1.4.1.171.10.134.1.1.7.6.1.4
dot1qVlanRowStatus The status of a row in dot1qVlanTable. By setting this object, new entries can be created in dot1qVlanTable and existing entries can be removed from dot1qVlanTable. It can be used as specified in the SNMP v2 standard.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.7.6.1.6

A table containing per port control and status
information for VLAN configuration in the device.

dot1qVlanPortEntry row .1.3.6.1.4.1.171.10.134.1.1.7.7.1

Information controlling VLAN configuration for a port
on the device.

Indexes

No indexes recorded

Column	Syntax	OID
dot1qVlanPvid The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.	VlanIndexr/w	.1.3.6.1.4.1.171.10.134.1.1.7.7.1.1

A list of the Static MACs

staticEntry row .1.3.6.1.4.1.171.10.134.1.1.9.3.1

A Static MAC entry containing the mac and forwarding port.

Indexes

staticVlanID staticMac staticPort

Column	Syntax	OID
staticVlanID The VLAN ID of the static MAC entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.10.134.1.1.9.3.1.1
staticMac The MAC address associated of the static MAC entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.9.3.1.2
staticPort The forwarding port of the static MAC entry. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.9.3.1.3
staticStatus The status of an entry in the Static MAC Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. The trunk member port can not set up static MAC.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.9.3.1.4

A list of the Auto Fdb

autoFdbEntry row .1.3.6.1.4.1.171.10.134.1.1.9.4.1

A auto fdb entry containing the ipaddress

Indexes

autoFdbIPAddress

Column	Syntax	OID
autoFdbIPAddress The IpAddress of the autoFdbEntry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.9.4.1.1
autoFdbVlanID The VlanID of the autoFdbEntry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.134.1.1.9.4.1.2
autoFdbMacAddress The Mac Address of the autoFdbEntry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.9.4.1.3
autoFdbPort The Port of the autoFdbEntry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.134.1.1.9.4.1.4
autoFdbTimeStamp The Time Stamp of the autoFdbEntry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.134.1.1.9.4.1.5
autoFdbStatus The status of an entry in the Auto Fdb Table. Only a subset of the rowstatus variables (createAndGo, createAndWait,destroy) are available.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.9.4.1.6

This table contains the list of ports through which 
a router, in a particular VLAN is reachable.

igsVlanRouterEntry row .1.3.6.1.4.1.171.10.134.1.1.10.3.3.1

Contains the VLAN ID and list of ports on which
routers are present in the VLAN.

Indexes

igsVlanRouterVlanId

Column	Syntax	OID
igsVlanRouterVlanId VLAN ID of the ports through which router is reachable.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.10.134.1.1.10.3.3.1.1
igsVlanRouterPortList List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.	PortList	.1.3.6.1.4.1.171.10.134.1.1.10.3.3.1.2

This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is  
enabled in the system.

igsVlanFilterEntry row .1.3.6.1.4.1.171.10.134.1.1.10.3.4.1

Contains snooping status , version and fast leave
configuration for a specific VLAN.

Indexes

igsVlanFilterVlanId

Column	Syntax	OID
igsVlanFilterVlanId Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in IgsVlanFilterEntry is to be done.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.10.134.1.1.10.3.4.1.1
igsVlanSnoopStatus This object allows you to enable/disable IGS function on a specific VLAN.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.10.134.1.1.10.3.4.1.2
igsVlanQuerier Indicates whether the switch is configured as a querier in the VLAN	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.10.134.1.1.10.3.4.1.3
igsVlanCfgQuerier The snooping switch can be configured as a querier via this object to send out IGMP general queries when IGMP routers are not present in the VLAN. When set to 'enabled', the switch will generate general queries.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.10.134.1.1.10.3.4.1.4
igsVlanQueryInterval This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VLAN only when there is no queriers in th…	Integer32 Constraints: range: 60-600	.1.3.6.1.4.1.171.10.134.1.1.10.3.4.1.5
igsVlanRtrPortList List of ports which are configured statically as router ports	PortListr/w	.1.3.6.1.4.1.171.10.134.1.1.10.3.4.1.6
igsVlanFastLeave Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message, the switch checks if they are any interested receivers for the group by sending a group specific query before removin…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.10.134.1.1.10.3.4.1.8

This table contains MAC based multicast forwarding 
information.

igsVlanMulticastGroupEntry row .1.3.6.1.4.1.171.10.134.1.1.10.3.5.1

This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded.

Indexes

igsVlanMulticastGroupVlanId igsVlanMulticastGroupIpAddress

Column	Syntax	OID
igsVlanMulticastGroupVlanId VLAN ID pertaining to the Multicast forwarding entry	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.10.134.1.1.10.3.5.1.1
igsVlanMulticastGroupIpAddress Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.134.1.1.10.3.5.1.2
igsVlanMulticastGroupMacAddress Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.10.3.5.1.3
igsVlanMulticastGroupPortList List of ports onto which the multicast data packets destined for this group will be forwarded.	PortList	.1.3.6.1.4.1.171.10.134.1.1.10.3.5.1.4

This table is used to manage the IGMP Authentication
function of the switch.

igsAccessAuthEntry row .1.3.6.1.4.1.171.10.134.1.1.10.5.1.1

Contains management entities for IGMP Authentication
function.

Indexes

igsAccessAuthPortIndex

Column	Syntax	OID
igsAccessAuthPortIndex The port index of igsAccessAuthTable which indicates the port to be configured. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.10.5.1.1.1
igsAccessAuthState This object can be configured to set IGMP Authentication state to enabled/disabled on each port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.10.134.1.1.10.5.1.1.2

This table is used to manage
the IGMP Host based Fast Leave function of the switch.

igsHostEntry row .1.3.6.1.4.1.171.10.134.1.1.10.6.1.1

Contains management entities for
IGMP Host based fast leave function.

Indexes

igsHostTableVLANID igsHostTableGroupAddress igsHostTablePort igsHostTableHostIPAddress

Column	Syntax	OID
igsHostTableVLANID VLAN ID of Host table entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.10.134.1.1.10.6.1.1.1
igsHostTableGroupAddress Group address of Host table entry.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.134.1.1.10.6.1.1.2
igsHostTablePort Port number of Host table entry. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.10.6.1.1.3
igsHostTableHostIPAddress Host IP address of Group in Host table entry.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.134.1.1.10.6.1.1.4

A list of 802.1p port default priority Entries.

dot1pPortEntry row .1.3.6.1.4.1.171.10.134.1.1.12.3.1.1

A list of 802.1p port default priority priorities.

Indexes

dot1pPortIndex

Column	Syntax	OID
dot1pPortIndex A port identifier that is in the range of 1 to ifNumber. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.12.3.1.1.1
dot1pPortPriority For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization. For ingress tagged packets, D-Link Smart Switches will refer t…	Enumerationr/w Enumerated Values: 1 low 2 medium 3 high 4 highest	.1.3.6.1.4.1.171.10.134.1.1.12.3.1.1.2

A list of priority by acl setting.

aclQosEntry row .1.3.6.1.4.1.171.10.134.1.1.12.8.2.1

A list of priority by acl setting entry.

Indexes

aclQosIndex

Column	Syntax	OID
aclQosIndex Index of priority by acl setting.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.10.134.1.1.12.8.2.1.1
aclQosType Type of priority by aclqos setting. DGS-1100-06ME only support ipv6traffic_class.	Enumerationr/w Enumerated Values: 7 ipv6traffic-class	.1.3.6.1.4.1.171.10.134.1.1.12.8.2.1.2
aclQosIP6TC Ipv6 Traffic Class number of priority by acl setting	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.10.134.1.1.12.8.2.1.10
aclQosAssignPriority Be mapped class of priority by acl setting.	Enumerationr/w Enumerated Values: 0 low 1 medium 2 high 3 highest	.1.3.6.1.4.1.171.10.134.1.1.12.8.2.1.98
aclQosStatus Status of priority by acl setting.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.12.8.2.1.99

A table to control the rate limiting parameters 
either for the entire switch or for each interface in the switch.

bandwidthCtrlEntry row .1.3.6.1.4.1.171.10.134.1.1.13.1.2.1

An entry appears in this table for each physical
interface in the switch.

Indexes

bandwidthCtrlIndex

Column	Syntax	OID
bandwidthCtrlIndex The interface index for which the configuration in this entry applies. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.13.1.2.1.1
bandwidthCtrlTxThreshold Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, th…	Integer32r/w Constraints: range: 0-0 range: 64-1000000	.1.3.6.1.4.1.171.10.134.1.1.13.1.2.1.2
bandwidthCtrlRxThreshold Allows to configure the limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for receive packets…	Integer32r/w Constraints: range: 0-0 range: 64-1000000	.1.3.6.1.4.1.171.10.134.1.1.13.1.2.1.3
bandwidthEffecTxThreshold This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate lim…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.134.1.1.13.1.2.1.4
bandwidthEffecRxThreshold Allows to configure the limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for receive packets…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.134.1.1.13.1.2.1.5

The traffic control table.

trafficCtrlEntry row .1.3.6.1.4.1.171.10.134.1.1.13.4.2.1

The traffic control entry.

Indexes

trafficCtrlIndex

Column	Syntax	OID
trafficCtrlIndex The traffic control index.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.10.134.1.1.13.4.2.1.1
trafficCtrlActionMode The action mode of traffic control.	Enumerationr/w Enumerated Values: 0 drop 1 shutdown	.1.3.6.1.4.1.171.10.134.1.1.13.4.2.1.2
trafficCtrlType The control type of traffic control. (b: Broadcast, m: Multicast, u: Unknown Unicast)	Enumerationr/w Enumerated Values: 0 none 1 b 2 m 3 mb 4 u 5 ub 6 um 7 umb	.1.3.6.1.4.1.171.10.134.1.1.13.4.2.1.3
trafficCtrlThreshold The threshold of traffic control.	Integer32r/w Constraints: range: 1-102400	.1.3.6.1.4.1.171.10.134.1.1.13.4.2.1.4
trafficCtrlCountDown The count down value of traffic control.	Integer32r/w Constraints: range: 0-30	.1.3.6.1.4.1.171.10.134.1.1.13.4.2.1.5
trafficCtrlTimeInterval The time interval of traffic control.	Integer32r/w Constraints: range: 5-30	.1.3.6.1.4.1.171.10.134.1.1.13.4.2.1.6

A table to configure trusted host in the system.

ipv4trustedHostEntry row .1.3.6.1.4.1.171.10.134.1.1.14.1.2.1

Each entry in this table represents rules for particular
trusted host.

Indexes

ipv4trustedHostIpAddr ipv4trustedHostIpMask

Column	Syntax	OID
ipv4trustedHostIpAddrobsolete The IP address of host you allow to access to D-Link Smart Switch. Your local host IP Addresses must be one of the IP Addresses to avoid disconnection.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.14.1.2.1.1
ipv4trustedHostIpMaskobsolete Used to mask with IP address, it allow you set a subnet as a trusted host entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.14.1.2.1.2
ipv4trustedHostRowStatusobsolete The status of an entry in the Trusted Host Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.14.1.2.1.3

A table to configure trusted host for in the system.

trustedHostEntry row .1.3.6.1.4.1.171.10.134.1.1.14.1.3.1

Each entry in this table represents rules for particular
trusted host.

Indexes

trustedHostIPType trustedHostIpAddr trustedHostIpMask

Column	Syntax	OID
trustedHostIPType Type of IP interface.	Enumeration Enumerated Values: 1 iPv4 2 iPv6	.1.3.6.1.4.1.171.10.134.1.1.14.1.3.1.1
trustedHostIpAddr The IP address of host you allow to access to D-Link Smart Switch. Your local host IPv4/6 Addresses must be one of the IP Addresses to avoid disconnection.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.14.1.3.1.2
trustedHostIpMask Used to mask with IPv4/6 address, it allow you set a subnet as a trusted host entry.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.14.1.3.1.3
trustedHostRowStatus The status of an entry in the Trusted Host Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.14.1.3.1.4

A table to control port security features of the device.

portSecEntry row .1.3.6.1.4.1.171.10.134.1.1.14.2.1.1

An entry appears in port security table for each interface
in the system.

Indexes

portSecIndex

Column	Syntax	OID
portSecIndex The interface index for which the configuration in this entry applies. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.14.2.1.1.1
portSecState Enable / disable port security admin state for the interface. A given ports' dynamic MAC address learning will be stopped such that the current source MAC addresses entered into the MAC address forwarding…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.10.134.1.1.14.2.1.1.2
portSecMLA Configures interface port security maximum learning address numbers. When given ports' admin state is enabled, allows forwarding table learning address number. The number can be set 0 to 6…	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.171.10.134.1.1.14.2.1.1.3
portSecLockAddrMode Configures port security lock address mode for the interface. deleteOnReset : The locked addresses will not age out until the Switch has been reset. deleteOnTimeout : The locked addresses will age out aft…	Enumerationr/w Enumerated Values: 1 deleteOnReset 2 deleteOnTimeout 3 permanent	.1.3.6.1.4.1.171.10.134.1.1.14.2.1.1.4

A table to control port security FDB Permanent of the device.

portSecFDBPermanentEntry row .1.3.6.1.4.1.171.10.134.1.1.14.2.2.1

An entry appears in port security table for each interface
in the system.

Indexes

portSecFDBPermPort portSecFDBPermIndex

Column	Syntax	OID
portSecFDBPermIndex The index of the port security MAC entry. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.14.2.2.1.1
portSecFDBPermVlanID The VLAN ID of the port security MAC entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.134.1.1.14.2.2.1.2
portSecFDBPermMac The MAC address associated of the port security MAC entry.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.14.2.2.1.3
portSecFDBPermPort The forwarding port of the port security MAC entry. For all machines give maximum port number.	Integer32 Constraints: range: 1-6	.1.3.6.1.4.1.171.10.134.1.1.14.2.2.1.4

A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table. 
This Port-channel table is indexed through Key values and allows to 
configure link selection policy and the Mac address for 
the port-channel. All other objects in this table displays 
the details of the port-channel

trafficSegEntry row .1.3.6.1.4.1.171.10.134.1.1.14.9.1.1

There is one entry in this table for each created
port-channel port

Indexes

trafficSegIfIndex

Column	Syntax	OID
trafficSegIfIndex The ifIndex of the port-channel(Aggregator's interface index).	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.10.134.1.1.14.9.1.1.1
trafficSegMemberList Port list of port channel.	PortListr/w	.1.3.6.1.4.1.171.10.134.1.1.14.9.1.1.2

A table that contains informations about server group.

aacServerGroupEntry row .1.3.6.1.4.1.171.10.134.1.1.14.11.5.1

A list of the group including servers.

Indexes

aacServerGroupIndex

Column	Syntax	OID
aacServerGroupIndex A value that uniquely identifies this SwAACServerGroupEntry .	Integer32 Constraints: range: 2-9	.1.3.6.1.4.1.171.10.134.1.1.14.11.5.1.1
aacServerGroupName A human-readable text string of the method group. The name is writable only if Group is new created, which the value of aacServerGroupRowStatus is 'notReady'.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.171.10.134.1.1.14.11.5.1.2
aacServersInGroup The list of servers in the group, each bit indicates a specified server ID. The server must be created before including it.	Bitsr/w Enumerated Values: 0 id1 1 id2 2 id3 3 id4 4 id5 5 id6 6 id7 7 id8 8 id9 9 id10 10 id11 11 id12 12 id13 13 id14 14 id15 15 id16	.1.3.6.1.4.1.171.10.134.1.1.14.11.5.1.3
aacServerGroupRowStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.14.11.5.1.4

A table that contains information about severs.

aacServerInfoEntry row .1.3.6.1.4.1.171.10.134.1.1.14.11.7.1

A list of the information of server .

Indexes

aacServerIndex

Column	Syntax	OID
aacServerIndex A value that uniquely identifies this SwAACServerGroupEntry.	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.1
aacServerIPType The IP address of the AAC server IP type referred to in this table entry. (IPv4=1, IPv6=2)	Enumerationr/w Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.2
aacServerIPAddr The IP address of Server	Ipv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.3
aacServerInterfaceName Specifies the interface name when the aacServerIPAddr is linklocal address.	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.4
aacServerAuthProtocol The authentication protocol provided by the Server.	Enumerationr/w Enumerated Values: 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.5
aacServerAuthPort The TCP/IP port .	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.6
aacServerAuthKey The key used while authentication process.	OctetStringr/w Constraints: range: 1-254	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.7
aacServerTimeout Server response timeout .	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.8
aacServerRetryCount Client retry count . (-1: No retry mechanism)	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.9
aacServerRowStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.14.11.7.1.10

A table that contains information about Login authentication method
lists.

aacLoginMethodListEntry row .1.3.6.1.4.1.171.10.134.1.1.14.11.8.1

A list of the Authentication methods.

Indexes

aacLoginMethodListIndex

Column	Syntax	OID
aacLoginMethodListIndex A value that identifies this method list.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.171.10.134.1.1.14.11.8.1.1
aacLoginMethodListName A human-readable text string of the method list.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.171.10.134.1.1.14.11.8.1.2
aacLoginMethod1 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.8.1.3
aacLoginMethod2 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.8.1.4
aacLoginMethod3 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.8.1.5
aacLoginMethod4 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.8.1.6
aacLoginMethodListRowStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.14.11.8.1.7

A table that contains information about Enable authentication method
lists.

aacEnableMethodListEntry row .1.3.6.1.4.1.171.10.134.1.1.14.11.9.1

A list of the Authentication methods.

Indexes

aacEnableMethodListIndex

Column	Syntax	OID
aacEnableMethodListIndex A value that identifies this method list.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.171.10.134.1.1.14.11.9.1.1
aacEnableMethodListName A human-readable text string of the method list.	OctetStringr/w Constraints: range: 1-15	.1.3.6.1.4.1.171.10.134.1.1.14.11.9.1.2
aacEnableMethod1 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.9.1.3
aacEnableMethod2 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.9.1.4
aacEnableMethod3 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.9.1.5
aacEnableMethod4 The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex.	Enumerationr/w Enumerated Values: -1 none 0 local 1 tacacsPlus 2 radius	.1.3.6.1.4.1.171.10.134.1.1.14.11.9.1.6
aacEnableMethodListRowStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.14.11.9.1.7

A table to ACL profile .

ipv4aclProfileEntry row .1.3.6.1.4.1.171.10.134.1.1.15.1.1.1

Each entry in this table is a ACL profile.
Index to the table is ACL profile ID.

Indexes

ipv4aclProfileNo

Column	Syntax	OID
ipv4aclProfileNoobsolete The ACL Profile ID. The ID 1 to 50 is user-defined ACL, and the ID more than 50 is reserved for system-defined ACL. The user only allow to create user-defined ACL ID. And system-defined ACL is read only.	Integer32 Constraints: range: 1-150	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.1
ipv4aclProfileTypeobsolete The ACL Profile type, possible value are l2 (1) - for MAC-based rule, l3 (2) - for IPv4-based rule, voiceVlan(6) - for Voice VLAN OUI entry. userDefined(9) - for User Defined entry. Note that only l2, l3 and userDefine…	Enumerationr/w Enumerated Values: 1 l2 2 l3	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.2
ipv4aclProfileRuleCountobsolete The number of rules in this profile.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.3
ipv4aclProfileMaskobsolete Indicate which field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ L2 DST_MAC …	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.4
ipv4aclProfileDstMacAddrMaskobsolete The ACL Profile destination MAC address mask. If DST_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleDstMacAddr, to caculate a range of MAC address which is really care.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.5
ipv4aclProfileSrcMacAddrMaskobsolete The ACL Profile source MAC address mask. If SRC_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleSrcMacAddr, to caculate a range of MAC address which is really care.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.6
ipv4aclProfileIPProtocolobsolete Indicate which IP Protocol will be care in this profile. Only profile type is l3 can set the IP protocol. For others, this field will be none.	Enumerationr/w Enumerated Values: 0 none 1 icmp 2 igmp 6 tcp 17 udp 255 ipMask	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.7
ipv4aclProfileIPProtocolMaskobsolete The ACL Profile IP protocol mask. If aclProfileIPProtocol set to ipMask, this field will be refered. It will work with its member rule field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. T…	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.8
ipv4aclProfileDstIpAddrMaskobsolete The ACL Profile destination IP address mask. If DST_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleDstIpAddr, to caculate a range of IP address which is really care. The value is in …	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.9
ipv4aclProfileSrcIpAddrMaskobsolete The ACL Profile source IP address mask. If SRC_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleSrcIpAddr, to caculate a range of IP address which is really care. The value is in HEX f…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.10
ipv4aclProfileDstPortMaskobsolete The ACL Profile UDP/TCP destination port mask. If DST_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpDstPort, to caculate a range of destination port which is really care. Th…	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.11
ipv4aclProfileSrcPortMaskobsolete The ACL Profile UDP/TCP source port mask. If SRC_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpSrcPort, to caculate a range of source port which is really care. The value is…	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.12
ipv4aclProfileStatusobsolete This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait', it could be set to 'active' only if the three values of…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.15.1.1.1.28

A table to ACL profile .

aclProfileEntry row .1.3.6.1.4.1.171.10.134.1.1.15.1.2.1

Each entry in this table is a ACL profile.
Index to the table is ACL profile ID.

Indexes

aclProfileNo

Column	Syntax	OID
aclProfileNo The ACL Profile ID. The ID 1 to 50 is user-defined ACL, and the ID more than 50 is reserved for system-defined ACL. The user only allow to create user-defined ACL ID. And system-defined ACL is read only.	Integer32 Constraints: range: 1-150	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.1
aclProfileType The ACL Profile type, possible value are l2 (1) - for MAC-based rule, l3v4 (2) - for IPv4-based rule, l3v6 (11) - for IPv6-based rule, voiceVlan(6) - for Voice VLAN OUI entry. userDefined(9) - for User De…	Enumerationr/w Enumerated Values: 1 l2 2 l3v4 11 l3v6	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.2
aclProfileRuleCount The number of rules in this profile.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.3
aclProfileMask Indicate which field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ L2 DST_MAC …	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.4
aclProfileDstMacAddrMask The ACL Profile destination MAC address mask. If DST_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleDstMacAddr, to caculate a range of MAC address which is really care.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.5
aclProfileSrcMacAddrMask The ACL Profile source MAC address mask. If SRC_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleSrcMacAddr, to caculate a range of MAC address which is really care.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.6
aclProfileIPProtocol Indicate which IP Protocol will be care in this profile. Only profile type is l3 can set the IP protocol. For others, this field will be none.	Enumerationr/w Enumerated Values: 0 none 1 icmp 2 igmp 6 tcp 17 udp 255 ipMask	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.7
aclProfileIPProtocolMask The ACL Profile IP protocol mask. If aclProfileIPProtocol set to ipMask, this field will be refered. It will work with its member rule field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. T…	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.8
aclProfileDstIpAddrMaskType IPv6 Address type.	Enumerationr/w Enumerated Values: 1 iPv4 2 iPv6	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.9
aclProfileDstIpAddrMask The ACL Profile destination IP address mask. If DST_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleDstIpAddr, to caculate a range of IP address which is really care. The value is in …	Ipv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.10
aclProfileSrcIpAddrMaskType IPv6 Address type.	Enumerationr/w Enumerated Values: 1 iPv4 2 iPv6	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.11
aclProfileSrcIpAddrMask The ACL Profile source IP address mask. If SRC_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleSrcIpAddr, to caculate a range of IP address which is really care. The value is in HEX f…	Ipv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.12
aclProfileDstPortMask The ACL Profile UDP/TCP destination port mask. If DST_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpDstPort, to caculate a range of destination port which is really care. Th…	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.13
aclProfileSrcPortMask The ACL Profile UDP/TCP source port mask. If SRC_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpSrcPort, to caculate a range of source port which is really care. The value is…	OctetStringr/w	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.14
aclProfileStatus This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait', it could be set to 'active' only if the three values of…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.15.1.2.1.30

A table to configure L2 filter rules in the system.

aclL2RuleEntry row .1.3.6.1.4.1.171.10.134.1.1.15.2.1.1

Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID.

Indexes

aclL2ProfileID aclL2AccessID

Column	Syntax	OID
aclL2AccessID L2 Filter rule ID. 0 means auto assign.	Integer32 Constraints: range: 0-250	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.1
aclL2ProfileID ACL Profile ID which this rule join.	Integer32 Constraints: range: 1-150	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.2
aclL2RuleEtherType The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '-1', which means the rule don't care this condition.	Integer32r/w Constraints: range: -1--1 range: 1501-65535	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.3
aclL2RuleDstMacAddr Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero,which means the rule don't care this condition.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.4
aclL2RuleSrcMacAddr Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.5
aclL2RuleVlanId Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.6
aclL2Rule1pPriority 802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.7
aclL2RuleDstMacAddrMask The MAC address Mask work for Destination MAC address. This field is read-only and copy from it's Profile setting.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.8
aclL2RuleSrcMacAddrMask The MAC address Mask work for Source MAC address. This field is read-only and copy from it's Profile setting.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.9
aclL2RuleInPortList Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list.	PortListr/w	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.10
aclL2RuleAction Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded.	Enumerationr/w Enumerated Values: 1 allow 2 drop 4 rateLimit 5 replaceDSCP	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.11
aclL2RuleRateLimit Rate limit for matched packet.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.12
aclL2RuleReplaceDSCP Replace DSCP for matched packet.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.13
aclL2RuleNonIPFilterOnlyState Enables / disables Non IP Filter Only State	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.15
aclL2RuleStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.15.2.1.1.99

A table to configure L3 filter rules in the system.

aclL3RuleEntry row .1.3.6.1.4.1.171.10.134.1.1.15.3.1.1

Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID.

Indexes

aclL3RuleProfileNo aclL3RuleAccessID

Column	Syntax	OID
aclL3RuleAccessID L3 Filter rule ID. 0 means auto assign.	Integer32 Constraints: range: 0-250	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.1
aclL3RuleProfileNo The Profile ID which this rule join.	Integer32 Constraints: range: 1-150	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.2
aclL3RuleProtocol The type of protocol to be checked against the packet.	Enumerationr/w Enumerated Values: 1 icmp 2 igmp 6 tcp 17 udp	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.3
aclL3RuleProtocolMask The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.	OctetString	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.4
aclL3RuleICMPMessageType The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means…	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.5
aclL3RuleICMPMessageCode The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1', which mean…	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.6
aclL3RuleDstIpAddr Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.7
aclL3RuleSrcIpAddr Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.8
aclL3RuleDstIpAddrMask The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.9
aclL3RuleSrcIpAddrMask The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.10
aclL3RuleTcpUdpDstPort The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.11
aclL3RuleTcpUdpSrcPort The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.12
aclL3RuleTcpUdpDstPortMask The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.	OctetString	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.13
aclL3RuleTcpUdpSrcPortMask The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.	OctetString	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.14
aclL3RuleTcpAckBit The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.15
aclL3RuleTcpRstBit The TCP RST bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.16
aclL3RuleTcpUrgBit The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.17
aclL3RuleTcpPshBit The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(-1). which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.18
aclL3RuleTcpSynBit The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.19
aclL3RuleTcpFinBit The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.20
aclL3RuleDscp The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.21
aclL3RuleTos The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.22
aclL3RuleIgmpType The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.23
aclL3RulePortList Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.	PortListr/w	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.24
aclL3RuleAction Specifies the action to be taken on the packet if the filter rule matches.	Enumerationr/w Enumerated Values: 1 allow 2 drop 4 rateLimit 5 replaceDSCP	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.25
aclL3RuleRateLimit Rate limit for matched packet.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.26
aclL3RuleReplaceDSCP ReplaceDSCP for matched packet.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.27
aclL3RuleStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.15.3.1.1.29

A table to configure L3 filter rules in the system.

aclv6L3RuleEntry row .1.3.6.1.4.1.171.10.134.1.1.15.3.2.1

Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID.

Indexes

aclv6L3RuleProfileNo aclv6L3RuleAccessID

Column	Syntax	OID
aclv6L3RuleAccessID L3 Filter rule ID. 0 means auto assign.	Integer32 Constraints: range: 0-250	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.1
aclv6L3RuleProfileNo The Profile ID which this rule join.	Integer32 Constraints: range: 1-150	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.2
aclv6L3RuleProtocol The type of protocol to be checked against the packet.	Enumerationr/w Enumerated Values: 1 icmp 6 tcp 17 udp	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.3
aclv6L3RuleProtocolMask The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.	OctetString	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.4
aclv6L3RuleICMPMessageType The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means…	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.5
aclv6L3RuleICMPMessageCode The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1', which mean…	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.6
aclv6L3RuleDstIpAddr Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.	Ipv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.7
aclv6L3RuleSrcIpAddr Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.	Ipv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.8
aclv6L3RuleDstIpAddrMask The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.9
aclv6L3RuleSrcIpAddrMask The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.	Ipv6Address Type Constraints: range: 16	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.10
aclv6L3RuleTcpUdpDstPort The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.11
aclv6L3RuleTcpUdpSrcPort The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.12
aclv6L3RuleTcpUdpDstPortMask The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.	OctetString	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.13
aclv6L3RuleTcpUdpSrcPortMask The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.	OctetString	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.14
aclv6L3RuleTcpAckBit The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.15
aclv6L3RuleTcpRstBit The TCP RST bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.16
aclv6L3RuleTcpUrgBit The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.17
aclv6L3RuleTcpPshBit The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(-1). which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.18
aclv6L3RuleTcpSynBit The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.19
aclv6L3RuleTcpFinBit The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition.	Enumerationr/w Enumerated Values: -1 dont-care 1 establish 2 notEstablish	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.20
aclv6L3RuleTrafficClass The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.21
aclv6L3RulePortList Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.	PortListr/w	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.23
aclv6L3RuleAction Specifies the action to be taken on the packet if the filter rule matches.	Enumerationr/w Enumerated Values: 1 allow 2 drop 4 rateLimit 5 replaceDSCP	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.24
aclv6L3RuleRateLimit Rate limit for matched packet.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.25
aclv6L3RuleReplaceDSCP ReplaceDSCP for matched packet.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.26
aclv6L3RuleStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.134.1.1.15.3.2.1.28