DES3852-SWL3MGMT-MIB Table View

This table contains the IP interface information.

swL3IpCtrlEntry row .1.3.6.1.4.1.171.11.69.4.3.2.1.1.1

A list of information about a specific IP interface.

Indexes

swL3IpCtrlIpAddr

Column	Syntax	OID
swL3IpCtrlIpAddr The IP address of the interface. This object can only contain the value of the unicast IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.1
swL3IpCtrlIfIndex This object uniquely identifies the IP interface number in the swL3IpCtrlTable.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.2
swL3IpCtrlInterfaceName This object indicates the name of the IP interface.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-12 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.3
swL3IpCtrlIpSubnetMask The IP net mask for this interface.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.4
swL3IpCtrlVlanName This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.5
swL3IpCtrlMode This object indicates the IP operation mode. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. manual (2)…	Enumerationr/w Enumerated Values: 1 other 2 manual 3 bootp 4 dhcp	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.6
swL3IpCtrlSecondary When this is true (1) the IP address is the secondary IP. When false (2), the IP address is the primary IP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.7
swL3IpCtrlState This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of objects is in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.8
swL3IpCtrlOperState The current operational state of the IP interface.	Enumeration Enumerated Values: 1 other 2 up 3 down	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.9
swL3IpCtrlProxyARPState This object indicates if the Proxy ARP function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.69.4.3.2.1.1.1.10

This table contains the virtual IP interface information.

swL3VirtualIpCtrlEntry row .1.3.6.1.4.1.171.11.69.4.3.2.1.2.1

A list of information about a specific virtual IP interface.

Indexes

swL3VirtualIpCtrlInterfaceName

Column	Syntax	OID
swL3VirtualIpCtrlInterfaceName This object indicates the name of the virtual IP interface.	SNMPv2-TCDisplayString Constraints: range: 1-12 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.1
swL3VirtualIpCtrlIfIndex This object uniquely identifies the virtual IP interface number in the swL3VirtualIpCtrlEntry.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.2
swL3VirtualIpCtrlIpAddr The virtual IP address of the interface. This object can only take the value of the unicast IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.3
swL3VirtualIpCtrlIpSubnetMask The net mask for this interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.4
swL3VirtualIpCtrlOperState The current operational state of the virtual IP interface.	Enumeration Enumerated Values: 1 other 2 up 3 down	.1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.5
swL3VirtualIpCtrlState This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.2.1.2.1.9

A table that contains forwarding and/or filtering information.
This information is used by the switch to determine how to
propagate the received IP packets.

swL3IpFdbInfoEntry row .1.3.6.1.4.1.171.11.69.4.3.2.2.1.1

Information about a specific IP address for which the bridge
has some forwarding and/or filtering information.

Indexes

swL3IpFdbInfoIpAddr

Column	Syntax	OID
swL3IpFdbInfoIpAddr An IP address for which the switch has forwarding and/or filtering information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.1
swL3IpFdbInfoIpSubnetMask An IP net mask for this interface for which the switch has forwarding and/or filtering information.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.2
swL3IpFdbInfoPort Either the value '0', or the port number of the packet that has an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr that has been seen. A value of '0' indicates that the port number h…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.3
swL3IpFdbInfoType The status of this entry.	Enumeration Enumerated Values: 1 other 2 static 3 dynamic	.1.3.6.1.4.1.171.11.69.4.3.2.2.1.1.4

This entity's IP static routing table.

swL3IpStaticRouteEntry row .1.3.6.1.4.1.171.11.69.4.3.2.5.1

A particular route to a particular destination, under a particular policy.
Once an entry is built, it shouldn't be modified. That is, it just supports a
create or delete action.

Indexes

swL3IpStaticRouteDest swL3IpStaticRouteMask swL3IpStaticRouteBkupState

Column	Syntax	OID
swL3IpStaticRouteDest The destination IP address of this route. This object will not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object with a value o…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.5.1.1
swL3IpStaticRouteMask Indicates that the mask is to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent c…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.5.1.2
swL3IpStaticRouteBkupState The routing state for this route. The value should be primary (1) or backup (2).	Enumeration Enumerated Values: 1 primary 2 backup	.1.3.6.1.4.1.171.11.69.4.3.2.5.1.3
swL3IpStaticRouteNextHop On remote routes, the address of the next system route; Otherwise, 0.0.0.0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.2.5.1.4
swL3IpStaticRouteMetric The routing metric for this route.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.69.4.3.2.5.1.5
swL3IpStaticRouteStatus This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.171.11.69.4.3.2.5.1.6

This table specifies the IP address as a destination to forward
(relay) BOOTP packets to.

swL3RelayBootpCtrlEntry row .1.3.6.1.4.1.171.11.69.4.3.3.1.7.1

A list of information that specifies the IP address of a destination
to forward (relay) BOOTP packets to.

Indexes

swL3RelayBootpCtrlInterfaceName swL3RelayBootpCtrlServer

Column	Syntax	OID
swL3RelayBootpCtrlInterfaceName The name of the IP interface.	SNMPv2-TCDisplayString Constraints: range: 0-12 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.69.4.3.3.1.7.1.1
swL3RelayBootpCtrlServer The BOOTP server IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.3.1.7.1.2
swL3RelayBootpCtrlState This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.171.11.69.4.3.3.1.7.1.3

This table display the current DNS relay static table.

swL3RelayDnsCtrlEntry row .1.3.6.1.4.1.171.11.69.4.3.3.2.6.1

A list of information displaying the current DNS relay
static table.

Indexes

swL3RelayDnsCtrlDomainName swL3RelayDnsCtrlIpAddr

Column	Syntax	OID
swL3RelayDnsCtrlDomainName The domain name of this entry.	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.69.4.3.3.2.6.1.1
swL3RelayDnsCtrlIpAddr The IP address of this entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.3.2.6.1.2
swL3RelayDnsCtrlState This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 valid	.1.3.6.1.4.1.171.11.69.4.3.3.2.6.1.3

This table display the current MD5 key table.

swL3Md5Entry row .1.3.6.1.4.1.171.11.69.4.3.4.1

A list of information displaying the current MD5 key table.

Indexes

swL3Md5KeyId

Column	Syntax	OID
swL3Md5KeyId The MD5 key ID.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.69.4.3.4.1.1
swL3Md5Key An MD5 password of up to 16 bytes.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-16 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.171.11.69.4.3.4.1.2
swL3Md5RowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.4.1.3

Route redistribution allows routers on the network that are
running different routing protocols to exchange routing
information. This is accomplished by comparing the routes stored
in the various routers routing tables and assigning appropriate
metrics. This information is then exchanged among the various
routers according to the individual routers current routing
protocol.

swL3RouteRedistriEntry row .1.3.6.1.4.1.171.11.69.4.3.5.1

A list of information displaying the route redistribution table.

Indexes

swL3RouteRedistriSrcProtocol swL3RouteRedistriDstProtocol

Column	Syntax	OID
swL3RouteRedistriSrcProtocol Allows the selection of the protocol for the source device.	Enumeration Enumerated Values: 1 other 2 rip 3 ospf 4 static 5 local	.1.3.6.1.4.1.171.11.69.4.3.5.1.1
swL3RouteRedistriDstProtocol Allows the selection of the protocol for the destination device.	Enumeration Enumerated Values: 1 other 2 rip 3 ospf	.1.3.6.1.4.1.171.11.69.4.3.5.1.2
swL3RouteRedistriType Allows the selection of one of the methods for calculating the metric value.	Enumerationr/w Enumerated Values: 1 other 2 all 3 type-1 4 type-2 5 internal 6 external 7 inter-E1 8 inter-E2 9 extType1 10 extType2	.1.3.6.1.4.1.171.11.69.4.3.5.1.3
swL3RouteRedistriMetric Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates the default value.	Integer32r/w Constraints: range: 0-16777214	.1.3.6.1.4.1.171.11.69.4.3.5.1.4
swL3RouteRedistriRowStatus This object indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.5.1.5

The list of hosts and their metrics that the router will
advertise as host routes.

swL3OspfHostEntry row .1.3.6.1.4.1.171.11.69.4.3.6.1

A metric to be advertised, for a given type of service, when a
given host is reachable.

Indexes

swL3OspfHostIpAddress swL3OspfHostTOS

Column	Syntax	OID
swL3OspfHostIpAddress The IP address of the host.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.6.1.1
swL3OspfHostTOS The Type of Service for the route being configured.	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.171.11.69.4.3.6.1.2
swL3OspfHostMetric The metric to be advertised.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.171.11.69.4.3.6.1.3
swL3OspfHostAreaID The area of the host entry to be found within. By default, this is the area that a subsuming OSPF interface is in, or 0.0.0.0	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.171.11.69.4.3.6.1.4
swL3OspfHostStatus This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.6.1.5

Information about this router's virtual inter-
faces.

swL3ospfVirtIfEntry row .1.3.6.1.4.1.171.11.69.4.3.7.1

Information about a single virtual interface.

Indexes

swL3ospfVirtIfAreaId swL3ospfVirtIfNeighbor

Column	Syntax	OID
swL3ospfVirtIfAreaId The transit area that the virtual link traverses. By definition, this is not 0.0.0.0	OSPF-MIBAreaID	.1.3.6.1.4.1.171.11.69.4.3.7.1.1
swL3ospfVirtIfNeighbor The router ID of the virtual neighbor.	OSPF-MIBRouterID	.1.3.6.1.4.1.171.11.69.4.3.7.1.2
swL3ospfVirtIfTransitDelay The estimated number of seconds it takes to transmit a link-state update packet over this interface.	OSPF-MIBUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.171.11.69.4.3.7.1.3
swL3ospfVirtIfRetransInterval The number of seconds between link-state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. T…	OSPF-MIBUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.171.11.69.4.3.7.1.4
swL3ospfVirtIfHelloInterval The length of time, in seconds, between the hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.	OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.171.11.69.4.3.7.1.5
swL3ospfVirtIfRtrDeadInterval The number of seconds that a router's hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for the virtual n…	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.171.11.69.4.3.7.1.6
swL3ospfVirtIfState OSPF virtual interface states.	Enumeration Enumerated Values: 1 down 4 pointToPoint	.1.3.6.1.4.1.171.11.69.4.3.7.1.7
swL3ospfVirtIfEvents The number of state changes or error events on this virtual link	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.69.4.3.7.1.8
swL3ospfVirtIfAuthType The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.11.69.4.3.7.1.9
swL3ospfVirtIfAuthKey If authentication type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication can…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.171.11.69.4.3.7.1.10
swL3ospfVirtIfAuthKeyID The MD5 key ID.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.11.69.4.3.7.1.11
swL3ospfVirtIfStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.7.1.12

The OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF.

swL3ospfIfEntry row .1.3.6.1.4.1.171.11.69.4.3.8.1

The OSPF interface entry describes one inter-
face from the viewpoint of OSPF.

Indexes

swL3ospfIfIpAddress swL3ospfAddressLessIf

Column	Syntax	OID
swL3ospfIfIpAddress The IP address of this OSPF interface.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.8.1.1
swL3ospfAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP add…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.69.4.3.8.1.2
swL3ospfIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.171.11.69.4.3.8.1.3
swL3ospfIfType The OSPF interface type. By way of default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and s…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.171.11.69.4.3.8.1.4
swL3ospfIfAdminStat The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some areas. The value 'disabled' denotes that the interface is external to OS…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.69.4.3.8.1.5
swL3ospfIfRtrPriority The priority of this interface. Used in multi-access networks, this field is used by the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on …	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.11.69.4.3.8.1.6
swL3ospfIfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	OSPF-MIBUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.171.11.69.4.3.8.1.7
swL3ospfIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.	OSPF-MIBUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.171.11.69.4.3.8.1.8
swL3ospfIfHelloInterval The length of time, in seconds, between the hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.	OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.171.11.69.4.3.8.1.9
swL3ospfIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for all routers att…	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.171.11.69.4.3.8.1.10
swL3ospfIfPollInterval The larger time interval, in seconds, between the hello packets sent to an inactive non- broadcast multi-access neighbor.	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.171.11.69.4.3.8.1.11
swL3ospfIfState The OSPF interface state.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.4.1.171.11.69.4.3.8.1.12
swL3ospfIfDesignatedRouter The IP address of the designated router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.8.1.13
swL3ospfIfBackupDesignatedRouter The IP address of the backup designated router.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.8.1.14
swL3ospfIfEvents The number of times this OSPF interface has changed its state, or when an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.171.11.69.4.3.8.1.15
swL3ospfIfMulticastForwarding The way multicasts should be forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaning- ful on point-to-point and NBMA inter…	Enumerationr/w Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.171.11.69.4.3.8.1.16
swL3ospfIfDemand Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.69.4.3.8.1.17
swL3ospfIfAuthType The authentication type specified for an in- terface. Additional authentication types may be assigned locally.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.11.69.4.3.8.1.18
swL3ospfIfAuthKey The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated i…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.171.11.69.4.3.8.1.19
swL3ospfIfAuthKeyID The MD5 key ID.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.171.11.69.4.3.8.1.20
swL3ospfIfStatus This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.8.1.21

The PIM CBSR Table contains the CBSR related information, like
interface and priority.

swL3pimCbsrEntry row .1.3.6.1.4.1.171.11.69.4.3.11.1.3.1

An entry in the PIM CBSR Table.

Indexes

swL3pimCbsrInterface

Column	Syntax	OID
swL3pimCbsrInterface The ifIndex value of this PIM interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.11.69.4.3.11.1.3.1.1
swL3pimCbsrPriority The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.171.11.69.4.3.11.1.3.1.2

The PIM Register Checksum Including Data Table contains the PIM
register checksum including data information, like RP address and
state.

swL3pimRegChksumIncDataEntry row .1.3.6.1.4.1.171.11.69.4.3.11.4.1

An entry in the PIM Register Checksum Including the Data Table.

Indexes

swL3SwL3pimRegChksumIncDataRpAddr

Column	Syntax	OID
swL3SwL3pimRegChksumIncDataRpAddr Specifies the RP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.4.1.1
swL3SwL3pimRegChksumIncDataState The state of register checksum including the data for RPs.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.11.4.1.2

The PIM Information Table contains PIM related information, like
DR priority.

swL3pimInfoEntry row .1.3.6.1.4.1.171.11.69.4.3.11.5.3.1

An entry in the PIM Information Table.

Indexes

swL3pimInterface

Column	Syntax	OID
swL3pimInterface The ifIndex value of this PIM interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.171.11.69.4.3.11.5.3.1.1
swL3pimDRPriority The DR Priority is a 32-bit unsigned number and the numerically larger priority is always prefered. A router's idea of the current DR on an interface can change when a PIM hello message is received, when a neighbor time…	Unsigned32r/w Constraints: range: 0-4294967294	.1.3.6.1.4.1.171.11.69.4.3.11.5.3.1.2

The PIM Static RP Table contains the PIM static RP related information,
like group address, group mask, RP address and RP row status.

swL3pimStaticRPEntry row .1.3.6.1.4.1.171.11.69.4.3.11.6.1

An entry in the PIM Static RP Table.

Indexes

swL3pimStaticRPGroupAddress swL3pimStaticRPGroupMask swL3pimStaticRPAddress

Column	Syntax	OID
swL3pimStaticRPGroupAddress The IP multicast group address which, when combined with swL3pimStaticRPGroupMask, identifies a group prefix for which the local router will advertise itself as a static RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.6.1.1
swL3pimStaticRPGroupMask The multicast group address mask which, when combined with swL3pimStaticRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a static RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.6.1.2
swL3pimStaticRPAddress The (unicast) address of the interface which will be advertised as a static RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.6.1.3
swL3pimStaticRPRowStatus The status of this row. New entries may be created or old entries deleted from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.69.4.3.11.6.1.4

The PIM Active RP Table contains the PIM active RP
related information, like group address, RP address.

swL3pimActiveRPEntry row .1.3.6.1.4.1.171.11.69.4.3.11.7.1

An entry (conceptual row) in the swL3pimActiveRPTable.

Indexes

swL3pimActiveRPGroupAddress

Column	Syntax	OID
swL3pimActiveRPGroupAddress The IP multicast group address for which this entry contains information about the Active-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.7.1.1
swL3pimActiveRPSourceIPAddress The IP address for which this entry contains information about the source of multicast data.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.7.1.2
swL3pimActiveRPSourceIPMask The IP mask for which this entry contains information about the source of multicast data.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.7.1.3
swL3pimActiveRPAddress The IP address of the Active-RP.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.69.4.3.11.7.1.4