DES3528-SWL3MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
20
Rows
20
Columns
165

swL3IpCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.3.2.1.3 · 1 row entry · 20 columns
Open in standard view 
This table contains IP interface information.
swL3IpCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1
A list of information about a specific IP interface.
Indexes
swL3IpCtrlInterfaceName
Column Syntax OID
swL3IpCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.1
swL3IpCtrlIfIndex
This object uniquely identifies the IP interface number in the
swL3IpCtrlTable.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.2
swL3IpCtrlIpAddr
The IP address of the interface. This object only can take the
value of the unicast IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.3
swL3IpCtrlIpSubnetMask
The IP net mask for this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.4
swL3IpCtrlVlanName
This object indicates the IP control entry's VLAN name. The
VLAN name in each entry must be unique in the IP Control Table.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.5
swL3IpCtrlProxyArp
This object indicates enable/disable of the proxy ARP function for IPv4.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.6
swL3IpCtrlSecondary
When this is true(1), the IP address is the secondary IP. When
false(2), the IP address is the primary IP.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.7
swL3IpCtrlMode
This object indicates the IP operation mode.

other(1) - This entry is currently in use but the conditions under
which it will remain are determined by each of the following values.
bootp(3) - The I…
Enumerationr/w
Enumerated Values:
1other
3bootp
4dhcp
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.8
swL3IpCtrlAdminState
The state of the IP interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.9
swL3IpCtrlIpv4AdminState
The IPv4 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.10
swL3IpCtrlIpv6AdminState
The IPv6 admin state of the IP interface. The default state is determined by project.
This state will only be effective when the swL3IpCtrlAdminState is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.12
swL3IpCtrlIpv6LinkLocalAddress
The IPv6 link local address for this interface.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.14
swL3IpCtrlIpv6LinkLocalPrefixLen
The IPv6 prefix length for this IPv6 link local address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.15
swL3IpCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.16
swL3IpCtrlIpv6LinkLocalAutoState
The state of the IPv6 link local auto.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.17
swL3IpCtrlProxyArpLocalState
If the state is enabled, the switch will be allowed to respond to the proxy ARP
proxy ARP when the source IP and destination IP are on the same interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.18
swL3IpCtrlIpMtu
The MTU is the largest size of the IP datagram which may be transferred
using a specific data link connection. The MTU value is a design parameter
of a LAN and is a mutually agreed value (i.e. both ends of a link agree …
bytesSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.19
swL3IpCtrlDhcpv6ClientState
The state of the Dhcpv6 Client.
Enumerationr/w
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.20
swL3IpCtrlIpDhcpOption12State
Enable or disable insertion of option 12 in the DHCPDISCOVER and
DHCPREQUEST message.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.22
swL3IpCtrlIpDhcpOption12HostName
Specify the host name to be inserted in the DHCPDISCOVER and
DHCPREQUEST message. The specified host name must start with a
letter, end with a letter or digit, and have only letters, digits,
and hyphen as interior ch…
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.11.105.1.3.2.1.3.1.23

swL3Ipv6CtrlTable

table
.1.3.6.1.4.1.171.11.105.1.3.2.1.4 · 1 row entry · 12 columns
Open in standard view 
This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry entry .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1
A list of IPv6 information about a specific IP interface.
Indexes
swL3Ipv6CtrlInterfaceName
Column Syntax OID
swL3Ipv6CtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.1
swL3Ipv6CtrlMaxReassmblySize
Maximum Reassembly Size of the IP interface.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.2
swL3Ipv6CtrlNsRetransTimer
Neighbor solicitation's retransmit timer.
The unit is set in milliseconds.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.3
swL3Ipv6CtrlRaState
Neighbor solicited state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.5
swL3Ipv6CtrlRaMinRtrAdvInterval
The minimum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds.
It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInt…
Integer32r/w
Constraints:
range: 3-1350
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.6
swL3Ipv6CtrlRaMaxRtrAdvInterval
The maximum time allowed between sending unsolicited multicast Router
Advertisements from the interface. The unit is set in seconds.
Integer32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.7
swL3Ipv6CtrlRaLifeTime
Indicates the lifetime of the router as the default router.
Integer32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.8
swL3Ipv6CtrlRaReachableTime
Indicates the amount of time that a node can consider a neighboring
node reachable after receiving a reachability confirmation.
Integer32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.9
swL3Ipv6CtrlRaRetransTime
Indicates the amount of time between retransmissions of neighbor
solicited messages.
The unit is set in millisecond.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.10
swL3Ipv6CtrlRaHopLimit
Indicates the default value of the hop limit field in the IPv6 header for
packets sent by hosts that receive this RA message.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.11
swL3Ipv6CtrlRaManagedFlag
When enabled, it indicates that hosts receiving this RA must use a
stateful address configuration protocol to obtain an address in the addition
to the addresses derived from the stateless address configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.12
swL3Ipv6CtrlRaOtherConfigFlag
When enabled, it indicates that hosts receiving this RA must use a stateful
address configuration protocol to obtain an on-link address configuration information.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.4.1.13

swL3Ipv6AddressCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.3.2.1.5 · 1 row entry · 9 columns
Open in standard view 
This table contains IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1
A list of information about a specific IPv6 address.
Indexes
swL3Ipv6AddressCtrlInterfaceName swL3Ipv6Address swL3Ipv6AddressCtrlPrefixLen
Column Syntax OID
swL3Ipv6AddressCtrlInterfaceName
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.1
swL3Ipv6Address
Specify the IPv6 address.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.2
swL3Ipv6AddressCtrlPrefixLen
Indicates the prefix length of this IPv6 address.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.3
swL3Ipv6AddressCtrlPreferredLifeTime
Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains in preferred state.
For an infinite valid lifetime, the value can be set to 0xfffffff…
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.4
swL3Ipv6AddressCtrlValidLifeTime
Indicates the number of seconds that an address, based on the specified prefix,
using the stateless address configuration, remains valid.
For an infinite valid lifetime, the value can be set to 0xffffffff.
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.5
swL3Ipv6AddressCtrlOnLinkFlag
When enabled, the address implied by the specified prefix is available
on the link where the RA message is received.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.6
swL3Ipv6AddressCtrlAutonomousFlag
When enabled, the specified prefix will be used to create an autonomous address configuration.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.7
swL3Ipv6AddressCtrlState
This variable displays the status of the entry. The status is used
for creating, modifying, and deleting instances of the objects
in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.8
swL3Ipv6AddressCtrlAddressType
This object indicates the type of the IPv6 address.

manual(1): the IPv6 address is configured by user.
dhcpv6(2): the IPv6 address is assigned by DHCPv6 server.
stateless(3): the IPv6 address is assigned …
Enumeration
Enumerated Values:
1manual
2dhcpv6
3stateless
 .1.3.6.1.4.1.171.11.105.1.3.2.1.5.1.9

swL3IpFdbInfoTable

table
.1.3.6.1.4.1.171.11.105.1.3.2.2.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains forwarding and/or filtering information.
This information is used by the switch in determining how to
propagate the received IP packets.
swL3IpFdbInfoEntry entry .1.3.6.1.4.1.171.11.105.1.3.2.2.1.1
Information about a specific IP address for which the bridge
has some forwarding and/or filtering information.
Indexes
swL3IpFdbInfoIpAddr
Column Syntax OID
swL3IpFdbInfoIpAddr
A IP address for which switch has forwarding and/or filtering
information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.2.1.1.1
swL3IpFdbInfoIpSubnetMask
A IP net mask for this interface for which the switch has
forwarding and/or filtering information.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.2.1.1.2
swL3IpFdbInfoPort
Either the value '0', or the port number of the port on which
packet having a IP address equal to the value of the
corresponding instance of swL3IpFdbInfoIpAddr has been seen. A
value of '0' indicates that the port nu…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.3.2.2.1.1.3
swL3IpFdbInfoType
The status of this entry.
Enumeration
Enumerated Values:
1other
2static
3dynamic
 .1.3.6.1.4.1.171.11.105.1.3.2.2.1.1.4

swL3IpStaticRouteTable

table
.1.3.6.1.4.1.171.11.105.1.3.2.5 · 1 row entry · 9 columns
Open in standard view 
This entity's IP static Routing table.
swL3IpStaticRouteEntry entry .1.3.6.1.4.1.171.11.105.1.3.2.5.1
A particular route to a particular destination, under a particular policy.
Once an entry is built,it shouldn't be modified.That is,it just supports
create and delete actions.
Indexes
swL3IpStaticRouteDest swL3IpStaticRouteMask swL3IpStaticRouteNextHop
Column Syntax OID
swL3IpStaticRouteDest
The destination IP address of this route.

This object may not take a Multicast (Class D)
address value.

Any assignment (implicit or otherwise) of an
instance of this object to a valu…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.1
swL3IpStaticRouteMask
Indicate the mask to be logical-AND with the
destination address before being compared to
the value in the swL3IpStaticRouteDest field.
For those systems that do not support arbitrary
subnet masks, an agent c…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.2
swL3IpStaticRouteBkupState
The routing state for this route.The value SHOULD be
primary(1), backup(2) or none(3).
Enumerationr/w
Enumerated Values:
1primary
2backup
3none
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.3
swL3IpStaticRouteNextHop
Specifies the IP address for the next hop router.
An IP address of 255.255.255.255 denotes a Null interface
as the next hop.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.4
swL3IpStaticRouteMetric
Specifies the routing metric for this route.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.5
swL3IpStaticRouteStatus
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
4active
5inActive
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.6
swL3IpStaticRouteWeight
Specifies the weight value. Used for the weighted multipath.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.7
swL3IpStaticRouteInterfaceName
Specifies the name of the IP interface.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.8
swL3IpStaticRouteCost
Specifies the cost of the Route Entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.2.5.1.9

swL3IpMcastStaticRouteTable

table
.1.3.6.1.4.1.171.11.105.1.3.2.6.1 · 1 row entry · 4 columns
Open in standard view 
IP multicast static routing allows you to have multicast paths diverge from the unicast paths.
swL3IpMcastStaticRouteEntry entry .1.3.6.1.4.1.171.11.105.1.3.2.6.1.1
A list of information about IP multicast static routes.
Indexes
swL3IpMcastStaticRouteIpmrouteAddr swL3IpMcastStaticRouteIpmrouteMask
Column Syntax OID
swL3IpMcastStaticRouteIpmrouteAddr
If the source IP address of the received IP multicast packet matches
this Ipmrouteaddress, the RPF network is used to do an RPF check.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.6.1.1.1
swL3IpMcastStaticRouteIpmrouteMask
This specifies an IP net Mask for this interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.6.1.1.2
swL3IpMcastStaticRouteRpfAddr
If the source IP address of the received IP multicast packet matches
the Ipmrouteaddress, the Rpfaddress will be used to check whether the packet
received is from a legal interface.
If it is set to null, it means that i…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.2.6.1.1.3
swL3IpMcastStaticRouteRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.2.6.1.1.4

swL3RelayDhcpCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.3.3.1.4 · 1 row entry · 3 columns
Open in standard view 
This table specifies the IP address as a destination to forward
(relay) DHCP packets to.
swL3RelayDhcpCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.3.3.1.4.1
A list of information specifying the IP address as a destination
to forward (relay) DHCP packets to.
Indexes
swL3RelayDhcpCtrlInterfaceName swL3RelayDhcpCtrlServer
Column Syntax OID
swL3RelayDhcpCtrlInterfaceName
The name of the IP interface.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.11.105.1.3.3.1.4.1.1
swL3RelayDhcpCtrlServer
The DHCP server IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.3.1.4.1.2
swL3RelayDhcpCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.105.1.3.3.1.4.1.3

swL3RelayDnsCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.3.3.2.6 · 1 row entry · 3 columns
Open in standard view 
This table displays the current DNS relay static table.
swL3RelayDnsCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.3.3.2.6.1
A list of information display the current DNS relay static
table.
Indexes
swL3RelayDnsCtrlDomainName swL3RelayDnsCtrlIpAddr
Column Syntax OID
swL3RelayDnsCtrlDomainName
The domain name of the entry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.105.1.3.3.2.6.1.1
swL3RelayDnsCtrlIpAddr
The IP address of the entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.3.2.6.1.2
swL3RelayDnsCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.105.1.3.3.2.6.1.3

swL3Dhcpv6RelayCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.3.3.3.2 · 1 row entry · 2 columns
Open in standard view 
This table displays the current DHCPv6 relay static table.
swL3Dhcpv6RelayCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.3.3.3.2.1
A list of information display the current DHCPv6 relay static
table.
Indexes
swL3Dhcpv6RelayCtrlInterfaceName
Column Syntax OID
swL3Dhcpv6RelayCtrlInterfaceName
This object indicates the name of the relay interface.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.105.1.3.3.3.2.1.1
swL3Dhcpv6RelayCtrlState
TThis object indicates Dhcpv6 Relay function is enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.3.3.2.1.2

swL3Dhcpv6RelayInfoTable

table
.1.3.6.1.4.1.171.11.105.1.3.3.3.3 · 1 row entry · 4 columns
Open in standard view 
This table displays the current DHCPv6 relay static table.
swL3Dhcpv6RelayInfoEntry entry .1.3.6.1.4.1.171.11.105.1.3.3.3.3.1
A list of information display the current DHCPv6 relay static
table.
Indexes
swL3Dhcpv6RelayInfoInterfaceName swL3Dhcpv6RelayInfoServerAddress swL3Dhcpv6RelayInfoServerInterfaceName
Column Syntax OID
swL3Dhcpv6RelayInfoInterfaceName
This object indicates the name of the relay interface.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.105.1.3.3.3.3.1.1
swL3Dhcpv6RelayInfoServerAddress
Specify the IPv6 address.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.11.105.1.3.3.3.3.1.2
swL3Dhcpv6RelayInfoServerInterfaceName
When the swL3Dhcpv6RelayInfoServerAddress is multicast address,
this object indicates the name of the interface, which is connected
to the DHCPv6 server.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.105.1.3.3.3.3.1.3
swL3Dhcpv6RelayInfoRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.3.3.3.1.4

swL3Md5Table

table
.1.3.6.1.4.1.171.11.105.1.3.4 · 1 row entry · 3 columns
Open in standard view 
This table displays the current MD5 key table.
swL3Md5Entry entry .1.3.6.1.4.1.171.11.105.1.3.4.1
A list of information displays the current MD5 key table.
Indexes
swL3Md5KeyId
Column Syntax OID
swL3Md5KeyId
The MD5 key ID.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.105.1.3.4.1.1
swL3Md5Key
An MD5 password of up to 16 bytes.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.105.1.3.4.1.2
swL3Md5RowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.4.1.3

swL3RouteRedistriTable

table
.1.3.6.1.4.1.171.11.105.1.3.5 · 1 row entry · 5 columns
Open in standard view 
Route redistribution allows routers on the network that are 
running different routing protocols to exchange routing 
information. This is accomplished by comparing the routes stored
in the varios routers' routing tables and assigning appropriate
metrics. This information is then exchanged among the various 
routers according to the individual routers current routing 
protocol.
swL3RouteRedistriEntry entry .1.3.6.1.4.1.171.11.105.1.3.5.1
A list of information displaying the route redistribution table.
Indexes
swL3RouteRedistriSrcProtocol swL3RouteRedistriDstProtocol
Column Syntax OID
swL3RouteRedistriSrcProtocol
Allows the selection of the protocol of the source device.
Enumeration
Enumerated Values:
1other
2rip
3ospf
4static
5local
 .1.3.6.1.4.1.171.11.105.1.3.5.1.1
swL3RouteRedistriDstProtocol
Allows the selection of the protocol of the destination device.
Enumeration
Enumerated Values:
1other
2rip
3ospf
 .1.3.6.1.4.1.171.11.105.1.3.5.1.2
swL3RouteRedistriType
Allows the selection of one of the methods for calculating
the metric value.
Enumerationr/w
Enumerated Values:
1other
2all
3type-1
4type-2
5internal
6external
7inter-E1
8inter-E2
9extType1
10extType2
 .1.3.6.1.4.1.171.11.105.1.3.5.1.3
swL3RouteRedistriMetric
Allows the entry of an OSPF interface cost. This is analogous
to a Hop Count in the RIP routing protocol. The value '0'
indicates default value.
Integer32r/w
Constraints:
range: 0-16777214
 .1.3.6.1.4.1.171.11.105.1.3.5.1.4
swL3RouteRedistriRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.5.1.5

swL3OspfHostTable

table
.1.3.6.1.4.1.171.11.105.1.3.6 · 1 row entry · 5 columns
Open in standard view 
The list of Hosts, and their metrics, that the router will 
advertise as host routes.
swL3OspfHostEntry entry .1.3.6.1.4.1.171.11.105.1.3.6.1
A metric to be advertised, for a given type of service, when a
given host is reachable.
Indexes
swL3OspfHostIpAddress swL3OspfHostTOS
Column Syntax OID
swL3OspfHostIpAddress
The IP Address of the Host.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.6.1.1
swL3OspfHostTOS
The Type of Service of the route being configured.
OSPF-MIBTOSType
Textual Convention: OSPF-MIBTOSType Integer32
Type Constraints:
range: 0..30
 .1.3.6.1.4.1.171.11.105.1.3.6.1.2
swL3OspfHostMetric
The Metric to be advertised.
OSPF-MIBMetricr/w
Textual Convention: OSPF-MIBMetric Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.171.11.105.1.3.6.1.3
swL3OspfHostAreaID
The Area the Host Entry is to be found within. By default, the
area that a subsuming OSPF interface is in, or 0.0.0.0
OSPF-MIBAreaIDr/w
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.6.1.4
swL3OspfHostStatus
This variable displays the status of the entry. Setting it to
'invalid' has the effect of rendering it inoperative. The internal
effect (row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.6.1.5

swL3ospfVirtIfTable

table
.1.3.6.1.4.1.171.11.105.1.3.7 · 1 row entry · 12 columns
Open in standard view 
Information about this router's virtual inter-
faces.
swL3ospfVirtIfEntry entry .1.3.6.1.4.1.171.11.105.1.3.7.1
Information about a single Virtual Interface.
Indexes
swL3ospfVirtIfAreaId swL3ospfVirtIfNeighbor
Column Syntax OID
swL3ospfVirtIfAreaId
The Transit Area that the Virtual Link
traverses. By definition, this is not 0.0.0.0
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.7.1.1
swL3ospfVirtIfNeighbor
The Router ID of the Virtual Neighbor.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.7.1.2
swL3ospfVirtIfTransitDelay
The estimated number of seconds it takes to
transmit a link- state update packet over this
interface.
OSPF-MIBUpToMaxAger/w
Textual Convention: OSPF-MIBUpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.171.11.105.1.3.7.1.3
swL3ospfVirtIfRetransInterval
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state reque…
OSPF-MIBUpToMaxAger/w
Textual Convention: OSPF-MIBUpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.171.11.105.1.3.7.1.4
swL3ospfVirtIfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for the
virtual neighbor.
OSPF-MIBHelloRanger/w
Textual Convention: OSPF-MIBHelloRange Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.171.11.105.1.3.7.1.5
swL3ospfVirtIfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for t…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.3.7.1.6
swL3ospfVirtIfState
OSPF virtual interface states.
Enumeration
Enumerated Values:
1down
4pointToPoint
 .1.3.6.1.4.1.171.11.105.1.3.7.1.7
swL3ospfVirtIfEvents
The number of state changes or error events on
this Virtual Link
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.105.1.3.7.1.8
swL3ospfVirtIfAuthType
The authentication type specified for a virtu-
al interface. Additional authentication types
may be assigned locally.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.105.1.3.7.1.9
swL3ospfVirtIfAuthKey
If Authentication Type is simplePassword, the
device will left adjust and zero fill to 8 oc-
tets.

Note that unauthenticated interfaces need no
authentication key, and simple password authen-
ticatio…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.171.11.105.1.3.7.1.10
swL3ospfVirtIfAuthKeyID
The MD5 key ID.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.105.1.3.7.1.11
swL3ospfVirtIfStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.7.1.12

swL3ospfIfTable

table
.1.3.6.1.4.1.171.11.105.1.3.8 · 1 row entry · 22 columns
Open in standard view 
The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.
swL3ospfIfEntry entry .1.3.6.1.4.1.171.11.105.1.3.8.1
The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.
Indexes
swL3ospfIfIpAddress swL3ospfAddressLessIf
Column Syntax OID
swL3ospfIfIpAddress
The IP address of this OSPF interface.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.8.1.1
swL3ospfAddressLessIf
For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the corresponding value of
ifIndex for interfaces havin…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.8.1.2
swL3ospfIfAreaId
A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone.
OSPF-MIBAreaIDr/w
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.8.1.3
swL3ospfIfType
The OSPF interface type.

By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 802.5,
take the value 'broadcast', X.25…
Enumerationr/w
Enumerated Values:
1broadcast
2nbma
3pointToPoint
5pointToMultipoint
 .1.3.6.1.4.1.171.11.105.1.3.8.1.4
swL3ospfIfAdminStat
The OSPF interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabled' denotes
that the interface is extern…
OSPF-MIBStatusr/w
Textual Convention: OSPF-MIBStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.3.8.1.5
swL3ospfIfRtrPriority
The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi-
ble to become the designate…
OSPF-MIBDesignatedRouterPriorityr/w
Textual Convention: OSPF-MIBDesignatedRouterPriority Integer32
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.105.1.3.8.1.6
swL3ospfIfTransitDelay
The estimated number of seconds it takes to
transmit a link state update packet over this
interface.
OSPF-MIBUpToMaxAger/w
Textual Convention: OSPF-MIBUpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.171.11.105.1.3.8.1.7
swL3ospfIfRetransInterval
The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting database descrip-
tion and link-state request …
OSPF-MIBUpToMaxAger/w
Textual Convention: OSPF-MIBUpToMaxAge Integer32
Type Constraints:
range: 0..3600
 .1.3.6.1.4.1.171.11.105.1.3.8.1.8
swL3ospfIfHelloInterval
The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network.
OSPF-MIBHelloRanger/w
Textual Convention: OSPF-MIBHelloRange Integer32
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.171.11.105.1.3.8.1.9
swL3ospfIfRtrDeadInterval
The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello interval. This
value must be the same for a…
OSPF-MIBPositiveIntegerr/w
Textual Convention: OSPF-MIBPositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.8.1.10
swL3ospfIfPollInterval
The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor.
OSPF-MIBPositiveIntegerr/w
Textual Convention: OSPF-MIBPositiveInteger Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.8.1.11
swL3ospfIfState
The OSPF Interface State.
Enumeration
Enumerated Values:
1down
2loopback
3waiting
4pointToPoint
5designatedRouter
6backupDesignatedRouter
7otherDesignatedRouter
 .1.3.6.1.4.1.171.11.105.1.3.8.1.12
swL3ospfIfDesignatedRouter
The IP Address of the Designated Router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.8.1.13
swL3ospfIfBackupDesignatedRouter
The IP Address of the Backup Designated
Router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.8.1.14
swL3ospfIfEvents
The number of times this OSPF interface has
changed its state, or an error has occurred.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.105.1.3.8.1.15
swL3ospfIfMulticastForwarding
The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is not meaning-
ful on point to point and NB…
Enumerationr/w
Enumerated Values:
1blocked
2multicast
3unicast
 .1.3.6.1.4.1.171.11.105.1.3.8.1.16
swL3ospfIfDemand
Indicates whether Demand OSPF procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.105.1.3.8.1.17
swL3ospfIfAuthType
The authentication type specified for an in-
terface. Additional authentication types may
be assigned locally.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.105.1.3.8.1.18
swL3ospfIfAuthKey
The Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.

Note that unauthentica…
OctetStringr/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.171.11.105.1.3.8.1.19
swL3ospfIfAuthKeyID
The MD5 key ID.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.105.1.3.8.1.20
swL3ospfIfPassiveMode
Assign the designated entry to be a passive interface.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.3.8.1.21
swL3ospfIfMetric
The Metric to be advertised.
OSPF-MIBMetricr/w
Textual Convention: OSPF-MIBMetric Integer32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.171.11.105.1.3.8.1.23

swL3ospfAreaTable

table
.1.3.6.1.4.1.171.11.105.1.3.10 · 1 row entry · 6 columns
Open in standard view 
Information describing the configured  parame-
ters  and cumulative statistics of the router's
attached areas.
swL3ospfAreaEntry entry .1.3.6.1.4.1.171.11.105.1.3.10.1
Information describing the configured parame-
ters and cumulative statistics of one of the
router's attached areas.
Indexes
swL3ospfAreaId
Column Syntax OID
swL3ospfAreaId
A 32-bit integer uniquely identifying an area.
Area ID 0.0.0.0 is used for the OSPF backbone.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.10.1.1
swL3ospfAreaType obsolete
The type specified for an area.
Enumerationr/w
Enumerated Values:
1normal
2stub
3nssa
 .1.3.6.1.4.1.171.11.105.1.3.10.1.2
swL3ospfAreaSummaryState
Whether the summary LSA is effective for this area.
Enumerationr/w
Enumerated Values:
1none
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.3.10.1.3
swL3ospfAreaMetric
Enter the metric (1 - 65535; 0 for auto cost) of this area.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.3.10.1.4
swL3ospfAreaTranslateState
.
Enumerationr/w
Enumerated Values:
1none
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.3.10.1.5
swL3ospfAreaStatus
This variable displays the status of the en-
try. Setting it to 'invalid' has the effect of
rendering it inoperative. The internal effect
(row removal) is implementation dependent.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.10.1.6

swL3dvmrpInterfaceTable

table
.1.3.6.1.4.1.171.11.105.1.3.12 · 1 row entry · 8 columns
Open in standard view 
The (conceptual) table listing the router's multicast-
capable interfaces.
swL3dvmrpInterfaceEntry entry .1.3.6.1.4.1.171.11.105.1.3.12.1
An entry (conceptual row) in the dvmrpInterfaceTable. This
row augments ipMRouteInterfaceEntry in the IP Multicast MIB,
where the threshold object resides.
Indexes
swL3dvmrpInterfaceIfIndex
Column Syntax OID
swL3dvmrpInterfaceIfIndex
The ifIndex value of the interface for which DVMRP is
enabled.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.12.1.1
swL3dvmrpInterfaceLocalAddress
The IP address this system will use as a source address on
this interface. On unnumbered interfaces, it must be the
same value as dvmrpInterfaceLocalAddress for some interface
on the system.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.12.1.2
swL3dvmrpInterfaceMetric
The distance metric for this interface which is used to
calculate distance vectors.
Integer32r/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.171.11.105.1.3.12.1.3
swL3dvmrpInterfaceProbe
Probe distribution interval.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.3.12.1.4
swL3dvmrpInterfaceNbrTimeout
Used to set the timer before neighbors are timed out.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.3.12.1.5
swL3dvmrpInterfaceStatus
The status of this entry. Creating the entry enables DVMRP
on the virtual interface; destroying the entry or setting it
to notInService disables DVMRP on the virtual interface.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.12.1.6
swL3dvmrpInterfaceRcvBadPkts
The number of DVMRP packets received on the interface by
the DVMRP process which were subsequently discarded as
invalid (e.g. invalid packet format, or a route report from
an unknown neighbor).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.105.1.3.12.1.7
swL3dvmrpInterfaceRcvBadRoutes
The number of routes, in valid DVMRP packets, which were
ignored because the entry was invalid.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.105.1.3.12.1.8

swL3OspfInternalLsdbTable

table
.1.3.6.1.4.1.171.11.105.1.3.13.1 · 1 row entry · 8 columns
Open in standard view 
The OSPF Process's Link State Database.
swL3OspfInternalLsdbEntry entry .1.3.6.1.4.1.171.11.105.1.3.13.1.1
A single Link State Advertisement.
Indexes
swL3OspfInternalLsdbAreaId swL3OspfInternalLsdbType swL3OspfInternalLsdbLsid swL3OspfInternalLsdbRouterId
Column Syntax OID
swL3OspfInternalLsdbAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID
Textual Convention: OSPF-MIBAreaID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.1
swL3OspfInternalLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.2
swL3OspfInternalLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.3
swL3OspfInternalLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.4
swL3OspfInternalLsdbMetric
Enter the metric (1 - 65535; 0 for auto cost) of this area.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.5
swL3OspfInternalLsdbSequenceNo
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.6
swL3OspfInternalLsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.7
swL3OspfInternalLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.13.1.1.8

swL3OspfExternalLsdbTable

table
.1.3.6.1.4.1.171.11.105.1.3.13.2 · 1 row entry · 10 columns
Open in standard view 
The OSPF Process's Links State Database.
swL3OspfExternalLsdbEntry entry .1.3.6.1.4.1.171.11.105.1.3.13.2.1
A single Link State Advertisement.
Indexes
swL3OspfExternalLsdbType swL3OspfExternalLsdbLsid swL3OspfExternalLsdbRouterId
Column Syntax OID
swL3OspfExternalLsdbType
The type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
5asExternalLink
7nssaExternalLink
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.1
swL3OspfExternalLsdbLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.2
swL3OspfExternalLsdbRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID
Textual Convention: OSPF-MIBRouterID OctetString
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.3
swL3OspfExternalLsdbMetric
Enter the metric (1 - 65535; 0 for auto cost) of this area.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.4
swL3OspfExternalLsdbMetricType
Enter the metric type of this area.
Enumeration
Enumerated Values:
0unrecognized
1type-1
2type-2
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.5
swL3OspfExternalLsdbSequenceNo
The sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.6
swL3OspfExternalLsdbAge
This field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.7
swL3OspfExternalLsdbChecksum
This field is the checksum of the complete
contents of the advertisement, except the
age field. The age field is the exception so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.8
swL3OspfExternalLsdbForwardingAddress
This field is the forwarding address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.13.2.1.9
swL3OspfExternalLsdbRouteTag
This field is the route tag.
OctetString .1.3.6.1.4.1.171.11.105.1.3.13.2.1.10

swL3VrrpOperTable

table
.1.3.6.1.4.1.171.11.105.1.3.14.1 · 1 row entry · 16 columns
Open in standard view 
Operations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'swL3vrrpOperEntry' items.
swL3VrrpOperEntry entry .1.3.6.1.4.1.171.11.105.1.3.14.1.1
An entry in the vrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.

Rows in the ta…
Indexes
swL3VrrpOperIfIndex swL3VrrpOperVrId
Column Syntax OID
swL3VrrpOperIfIndex
The ifIndex value of the interface for which VRRP is
enabled.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.1
swL3VrrpOperVrId
This object contains the Virtual Router Identifier (VRID).
VrId
Textual Convention: VrId Integer32
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.2
swL3VrrpOperVirtualMacAddr
The virtual MAC address of the virtual router. Although this
object can be derived from the 'swL3VrrpOperVrId' object, it is
defined so that it is easily obtainable by a management
application and can be included in VRR…
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.3
swL3VrrpOperState
The current state of the virtual router. This object has
three defined values:

- `initialize', which indicates that all the
virtual router is waiting for a startup event.

- `backup'…
Enumeration
Enumerated Values:
1initialize
2backup
3master
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.4
swL3VrrpOperAdminState
This object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to `backup'
or `master', depending on the value of `swL3VrrpOperP…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.5
swL3VrrpOperPriority
This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.

A priority of '0', although not settable, is sent by
the master router to…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.6
swL3VrrpOperMasterIpAddr
The master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual router.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.7
swL3VrrpOperCriticalIpAddr
In the case where there is more than one IP address for
a given `ifIndex', this object is used to specify the IP
address that will become the `swL3VrrpOperMasterIpAddr', should
the virtual router transition from backup …
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.8
swL3VrrpOperCheckCriticalIpState
Critical IP state.
Enumerationr/w
Enumerated Values:
0other
1disabled
2enabled
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.9
swL3VrrpOperAuthType
Authentication type used for VRRP protocol exchanges between
virtual routers. This value of this object is the same for a
given ifIndex.

New enumerations to this list can only be added via a new
RFC on th…
Enumerationr/w
Enumerated Values:
1noAuthentication
2simpleTextPassword
3ipAuthenticationHeader
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.10
swL3VrrpOperAuthKey
The Authentication Key. This object is set according to
the value of the 'swL3VrrpOperAuthType' object
('simpleTextPassword' or 'ipAuthenticationHeader'). If the
length of the value is less than 16 octets, the agent wil…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.11
swL3VrrpOperAdvertisementInterval
The time interval, in seconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements.
secondsInteger32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.12
swL3VrrpOperPreemptMode
Controls whether a higher priority virtual router will
preempt a lower priority master.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.13
swL3VrrpOperVirtualRouterUpTime
This is the value of the `sysUpTime' object when this
virtual router (i.e., the `swL3VrrpOperState') transitioned
out of `initialized'.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.14
swL3VrrpOperVirtualIpAddr
The assigned IP addresses that a virtual router is
responsible for backing up.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.15
swL3VrrpOperRowStatus
The row status variable, used in accordance to installation
and removal conventions for conceptual rows. The rowstatus of
a currently active row in the vrrpOperTable is constrained
by the operational state of the corres…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.3.14.1.1.16