DES3528-L2MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
32
Rows
32
Columns
130

swL2DevCtrlCFMPortTable

table
.1.3.6.1.4.1.171.11.105.1.2.1.2.21.2 · 1 row entry · 2 columns
Open in standard view 
A table containing CFM state of speicified ports.
swL2DevCtrlCFMPortEntry entry .1.3.6.1.4.1.171.11.105.1.2.1.2.21.2.1
The entry of CFM state on speicified ports.
Indexes
swL2DevCtrlCFMPortIndex
Column Syntax OID
swL2DevCtrlCFMPortIndex
This object indicates the port-num.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.1.2.21.2.1.1
swL2DevCtrlCFMPortState
This object indicates the CFM state on per-port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.2.1.2.21.2.1.2

swL2VlanStaticTable

table
.1.3.6.1.4.1.171.11.105.1.2.2.1 · 1 row entry · 2 columns
Open in standard view 
A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.
swL2VlanStaticEntry entry .1.3.6.1.4.1.171.11.105.1.2.2.1.1
Static information for a VLAN configured into the
device by (local or network) management.
Indexes
swL2VlanIndex
Column Syntax OID
swL2VlanIndex
The VLAN-ID or other identifier referring to this VLAN.
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.105.1.2.2.1.1.1
swL2VLANAdvertisement
This object indicates if the advertisement is active or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.2.2.1.1.2

swL2VlanPortInfoTable

table
.1.3.6.1.4.1.171.11.105.1.2.2.3 · 1 row entry · 3 columns
Open in standard view 
A table containing vlan and port role information of each port.
swL2VlanPortInfoEntry entry .1.3.6.1.4.1.171.11.105.1.2.2.3.1
The table entry of vlan port information.
Indexes
swL2VlanPortInfoPortIndex swL2VlanPortInfoVid
Column Syntax OID
swL2VlanPortInfoPortIndex
The port index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.2.3.1.1
swL2VlanPortInfoVid
The VLAN-ID assigned to a special port
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.2.3.1.2
swL2VlanPortInfoPortRole
The port role of a special port.when none,it means this port is not belong to the vlan.
Enumeration
Enumerated Values:
1none
2untagged
3tagged
4dynamic
5forbidden
 .1.3.6.1.4.1.171.11.105.1.2.2.3.1.3

swL2PortInfoTable

table
.1.3.6.1.4.1.171.11.105.1.2.3.1 · 1 row entry · 7 columns
Open in standard view 
A table that contains information about every port.
swL2PortInfoEntry entry .1.3.6.1.4.1.171.11.105.1.2.3.1.1
A list of information for each port of the device.
Indexes
swL2PortInfoPortIndex swL2PortInfoMediumType
Column Syntax OID
swL2PortInfoPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.3.1.1.1
swL2PortInfoMediumType
Indicates medium type of the port number.
Enumeration
Enumerated Values:
1copper
2fiber
 .1.3.6.1.4.1.171.11.105.1.2.3.1.1.2
swL2PortInfoUnitID
Indicates ID of the unit in the system
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.3.1.1.3
swL2PortInfoType
This object indicates the connector type of this port.
Enumeration
Enumerated Values:
0portType-none
2portType-100Base-T
3portType-100Base-X
4portType-1000Base-T
5portType-1000Base-X
6portType-10GBase-R
7portType-10GBase-CX4
8portType-SIO
9portType-module-empty
10portType-user-last
 .1.3.6.1.4.1.171.11.105.1.2.3.1.1.4
swL2PortInfoLinkStatus
This object indicates the port link status.
Enumeration
Enumerated Values:
1other
2link-pass
3link-fail
 .1.3.6.1.4.1.171.11.105.1.2.3.1.1.5
swL2PortInfoNwayStatus
This object indicates the port speed and duplex mode.
Enumeration
Enumerated Values:
0link-down
1full-10Mbps-8023x
2full-10Mbps-none
3half-10Mbps-backp
4half-10Mbps-none
5full-100Mbps-8023x
6full-100Mbps-none
7half-100Mbps-backp
8half-100Mbps-none
9full-1Gigabps-8023x
10full-1Gigabps-none
11half-1Gigabps-backp
12half-1Gigabps-none
13full-10Gigabps-8023x
14full-10Gigabps-none
15half-10Gigabps-8023x
16half-10Gigabps-none
17empty
18err-disabled
 .1.3.6.1.4.1.171.11.105.1.2.3.1.1.6
swL2PortInfoErrorDisabled
This object indicates the blocking type of this port.
Enumeration
Enumerated Values:
0none
1storm
3unknow
4ctp-lbd
7power-saving
 .1.3.6.1.4.1.171.11.105.1.2.3.1.1.8

swL2PortCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.2.3.2 · 1 row entry · 9 columns
Open in standard view 
A table that contains control information about every port.
swL2PortCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.2.3.2.1
A list of control information for each port on the device.
Indexes
swL2PortCtrlPortIndex swL2PortCtrlMediumType
Column Syntax OID
swL2PortCtrlPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.1
swL2PortCtrlMediumType
Indicates the medium type of the port number.
Enumeration
Enumerated Values:
1copper
2fiber
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.2
swL2PortCtrlUnitIndex
Indicates the ID of the unit in the device
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.3
swL2PortCtrlAdminState
This object decides if the port is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.4
swL2PortCtrlNwayState
Chose the port speed, duplex mode, and N-Way function mode.
Enumerationr/w
Enumerated Values:
1other
2nway-enabled
3nway-disabled-10Mbps-Half
4nway-disabled-10Mbps-Full
5nway-disabled-100Mbps-Half
6nway-disabled-100Mbps-Full
7nway-disabled-1Gigabps-Half
8nway-disabled-1Gigabps-Full
9nway-disabled-1Gigabps-Full-master
10nway-disabled-1Gigabps-Full-slave
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.5
swL2PortCtrlFlowCtrlState
The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, the IEEE 802.3x flow
control function sends PAUSE fram…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.6
swL2PortCtrlLearningState
This object decides if the port is locked or not.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.7
swL2PortCtrlMACNotifyState
This object sets each port's MAC notification state.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.8
swL2PortCtrlMDIXState
This object configures the MDIX setting of the port.
Enumerationr/w
Enumerated Values:
1auto
2normal
3cross
 .1.3.6.1.4.1.171.11.105.1.2.3.2.1.10

swL2PortCableDiagnosisTable

table
.1.3.6.1.4.1.171.11.105.1.2.3.5 · 1 row entry · 6 columns
Open in standard view 
A table that contains cable diagnostic information about every port.
swL2PortCableDiagnosisEntry entry .1.3.6.1.4.1.171.11.105.1.2.3.5.1
A list of cable diagnostic information for each port of the device.
Indexes
swL2PortCableDiagnosisPortIndex swL2PortCableDiagnosisPairIndex
Column Syntax OID
swL2PortCableDiagnosisPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.3.5.1.1
swL2PortCableDiagnosisPairIndex
Indicates pair index of the port.
The pair 1 means the pin 3 and 6 of the connector.
The pair 2 means the pin 1 and 2 of the connector.
The pair 3 means the pin 7 and 8 of the connector.
The pair 4 means the pin 4 and 5…
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.171.11.105.1.2.3.5.1.2
swL2PortCableDiagnosisCableStatus
This object indicates the cable status.
Enumeration
Enumerated Values:
0ok
1open
2short
3open-short
4not-support
5unknown
 .1.3.6.1.4.1.171.11.105.1.2.3.5.1.3
swL2PortCableDiagnosisPairStatus
This object indicates the status of the pair.
Enumeration
Enumerated Values:
0ok
1open
2short
3fail
4not-supported
5unknown
 .1.3.6.1.4.1.171.11.105.1.2.3.5.1.4
swL2PortCableDiagnosisPairLength
This object indicates the approx. length or length to failure of
the pair. The unit value is in meters.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.3.5.1.5
swL2PortCableDiagnosisPairLengthInaccuracy
This object indicates the inaccuracy of a pair length. The unit value is in meters.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.3.5.1.6

swL2PortCounterCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.2.3.6 · 1 row entry · 2 columns
Open in standard view 
A table that used to clear counter information about every port.
swL2PortCounterCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.2.3.6.1
A list of entry used to clear counter information for each port of the device.
Indexes
swL2PortCounterCtrlPortIndex
Column Syntax OID
swL2PortCounterCtrlPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.3.6.1.1
swL2PortCounterClearCtrl
This object indicates if to clear the counters for each port of the device or not.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.105.1.2.3.6.1.2

swL2PortErrTable

table
.1.3.6.1.4.1.171.11.105.1.2.3.7 · 1 row entry · 4 columns
Open in standard view 
A table that contains error information for each port.
swL2PortErrEntry entry .1.3.6.1.4.1.171.11.105.1.2.3.7.1
A list of information regarding port errors on the device.
Indexes
swL2PortErrPortIndex
Column Syntax OID
swL2PortErrPortIndex
This object indicates the module's port number.(1..Max port number in
the module).
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.3.7.1.1
swL2PortErrPortState
This object indicates the port state is enabled or disabled.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.2.3.7.1.2
swL2PortErrPortConnStatus
This object indicates whether the PortStatus is err-disabled or not.
Enumeration
Enumerated Values:
1other
2err-disabled
 .1.3.6.1.4.1.171.11.105.1.2.3.7.1.3
swL2PortErrPortReason
This object describes if the reason for the port error is STP LBD or Storm control.
Enumeration
Enumerated Values:
2storm-control
3ctp-lbd
7power-saving
 .1.3.6.1.4.1.171.11.105.1.2.3.7.1.4

swL2MulticastFilterProfileTable

table
.1.3.6.1.4.1.171.11.105.1.2.5.1 · 1 row entry · 3 columns
Open in standard view 
A table that contains information about multicast filter address.
swL2MulticastFilterProfileEntry entry .1.3.6.1.4.1.171.11.105.1.2.5.1.1
A list of multicast filter address information for each profile ID.
Indexes
swL2MulticastFilterProfileIndex
Column Syntax OID
swL2MulticastFilterProfileIndex
Indicates index for each profile.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.11.105.1.2.5.1.1.1
swL2MulticastFilterProfileName
Specifies a profile name for each multicast filter profile.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.105.1.2.5.1.1.2
swL2MulticastFilterStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.2.5.1.1.3

swL2MulticastFilterProfileAddressTable

table
.1.3.6.1.4.1.171.11.105.1.2.5.2 · 1 row entry · 4 columns
Open in standard view 
A table that contains information about multicast filter address.
swL2MulticastFilterProfileAddressEntry entry .1.3.6.1.4.1.171.11.105.1.2.5.2.1
A list of multicast filter address information for each profile ID.
Indexes
swL2MulticastFilterProfileIdIndex swL2MulticastFilterFromIp swL2MulticastFilterToIp
Column Syntax OID
swL2MulticastFilterProfileIdIndex
Indicates index for each profile.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.11.105.1.2.5.2.1.1
swL2MulticastFilterFromIp
Specifies the head IP address of a multicast address range which will
be binded to a multicast filter profile.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.2.5.2.1.2
swL2MulticastFilterToIp
Specifies the tail IP address of a multicast address range which will
be binded to a multicast filter profile.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.2.5.2.1.3
swL2MulticastFilterAddressState
This object indicates the status of this entry.
Setting value to createAndGo(4) will add the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile.
Settin…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.2.5.2.1.4

swL2LimitedMulticastFilterPortTable

table
.1.3.6.1.4.1.171.11.105.1.2.5.3 · 1 row entry · 4 columns
Open in standard view 
A table that used to bind port to profile id.
swL2LimitedMulticastFilterPortEntry entry .1.3.6.1.4.1.171.11.105.1.2.5.3.1
A list of information that used to bind port to profile id.
Indexes
swL2LimitedMulticastFilterPortIndex
Column Syntax OID
swL2LimitedMulticastFilterPortIndex
Specifies port as an index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.5.3.1.1
swL2LimitedMulticastFilterPortAccess
This object indicates the access status for each port.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.11.105.1.2.5.3.1.2
swL2LimitedMulticastFilterPortProfileID
This object specifies a profile ID list for each port.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.105.1.2.5.3.1.3
swL2LimitedMulticastFilterPortProfileStatus
Controls the multicast filter profile list which bind to each port.
When set add(2), multicast filter profile ID list which specifies in
swL2LimitedMulticastFilterPortProfileID will be bound to the port.
When set delete…
Enumerationr/w
Enumerated Values:
1other
2add
3delete
 .1.3.6.1.4.1.171.11.105.1.2.5.3.1.4

swL2MulticastFilterPortMaxGroupTable

table
.1.3.6.1.4.1.171.11.105.1.2.5.4 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about max group number based on port.
swL2MulticastFilterPortMaxGroupEntry entry .1.3.6.1.4.1.171.11.105.1.2.5.4.1
A list of max group number information for each port.
Indexes
swL2MulticastFilterPortMaxGroupPortIndex
Column Syntax OID
swL2MulticastFilterPortMaxGroupPortIndex
Specifies port number as table index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.5.4.1.1
swL2MulticastFilterPortMaxGroup
Specifies maximum multicast filter group numbers for each port.
Default value is 0,and 0 means infinite.
Integer32r/w
Constraints:
range: 0-256
 .1.3.6.1.4.1.171.11.105.1.2.5.4.1.2

swL2QOSBandwidthControlTable

table
.1.3.6.1.4.1.171.11.105.1.2.6.1 · 1 row entry · 5 columns
Open in standard view 
.
swL2QOSBandwidthControlEntry entry .1.3.6.1.4.1.171.11.105.1.2.6.1.1
A list of information contained in the swL2QOSBandwidthControlTable.
Indexes
swL2QOSBandwidthPortIndex
Column Syntax OID
swL2QOSBandwidthPortIndex
Indicates the port .
Integer32
Constraints:
range: 1-768
 .1.3.6.1.4.1.171.11.105.1.2.6.1.1.1
swL2QOSBandwidthRxRate
Indicates RX Rate of the specified port. Value 1024001 means no limit.
Integer32r/w
Constraints:
range: 64-1024001
 .1.3.6.1.4.1.171.11.105.1.2.6.1.1.2
swL2QOSBandwidthTxRate
Indicates TX Rate of the specified port. Value 1024001 means no limit.
Integer32r/w
Constraints:
range: 64-1024001
 .1.3.6.1.4.1.171.11.105.1.2.6.1.1.3
swL2QOSBandwidthRadiusRxRate
The RxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured RxRate.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.6.1.1.4
swL2QOSBandwidthRadiusTxRate
The TxRate value comes from RADIUS server,
If an 802.1X port is authenticated, this value
will overwrites the locally configured TxRate.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.6.1.1.5

swL2QOSSchedulingTable

table
.1.3.6.1.4.1.171.11.105.1.2.6.2 · 1 row entry · 4 columns
Open in standard view 
.
swL2QOSSchedulingEntry entry .1.3.6.1.4.1.171.11.105.1.2.6.2.1
A list of information contained in the swL2QOSSchedulingTable.
Indexes
swL2QOSSchedulingClassIndex
Column Syntax OID
swL2QOSSchedulingClassIndex
Indicates the hardware queue number.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.105.1.2.6.2.1.1
swL2QOSSchedulingMaxPkts
Indicates the maximum number of packets the hardware priority queue will be allowed
to transmit before allowing the next lowest priority queue to transmit its packets.
a value between 0 and 15 can be specified.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.171.11.105.1.2.6.2.1.2
swL2QOSSchedulingMechanism
Indicates the mechanism of QoS scheduling.
Enumeration
Enumerated Values:
1strict
2roundrobin
3weightfair
 .1.3.6.1.4.1.171.11.105.1.2.6.2.1.3
swL2QOSSchedulingMaxLatency
Indicates the maximum amount of time the hardware priority queue will be allowed
to transmit packets before allowing the next lowest priority queue to begin transmitting
its packets. A value between 0 and 255 can be spe…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.105.1.2.6.2.1.4

swL2QOS8021pUserPriorityTable

table
.1.3.6.1.4.1.171.11.105.1.2.6.3 · 1 row entry · 2 columns
Open in standard view 
.
swL2QOS8021pUserPriorityEntry entry .1.3.6.1.4.1.171.11.105.1.2.6.3.1
A list of information contained in the swL2QOS8021pUserPriorityTable.
Indexes
swL2QOS8021pUserPriorityIndex
Column Syntax OID
swL2QOS8021pUserPriorityIndex
The 802.1p user priority .
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.105.1.2.6.3.1.1
swL2QOS8021pUserPriorityClass
The number of the switch's hardware priority queue. The switch has seven hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 6 (the highest priority).
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.171.11.105.1.2.6.3.1.2

swL2QOS8021pDefaultPriorityTable

table
.1.3.6.1.4.1.171.11.105.1.2.6.4 · 1 row entry · 3 columns
Open in standard view 
.
swL2QOS8021pDefaultPriorityEntry entry .1.3.6.1.4.1.171.11.105.1.2.6.4.1
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
Indexes
swL2QOS8021pDefaultPriorityIndex
Column Syntax OID
swL2QOS8021pDefaultPriorityIndex
Indicates the port number .
Integer32
Constraints:
range: 1-768
 .1.3.6.1.4.1.171.11.105.1.2.6.4.1.1
swL2QOS8021pDefaultPriority
The priority value to assign to untagged packets received by the
switch ports on the switch..
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.105.1.2.6.4.1.2
swL2QOS8021pRadiusPriority
The value of 802.1p comes from RADIUS server.
If an 802.1X port is authenticated, this value
will overwrite the local configured value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.6.4.1.3

swL2PortSecurityControlTable

table
.1.3.6.1.4.1.171.11.105.1.2.7.1 · 1 row entry · 5 columns
Open in standard view 
A port security feature which controls the address leaning capability and      
traffic forwarding decisions. Each port can be enabled or disabled for this function.
When it is enabled and a number is given said N, which allows N addresses to be
learned on this port, the first N learned addresses are locked at this port as
static entries. When the learned addresses number reaches N, any incoming packet 
without learned source addresses are discarded (e.g. dropped) and no more new 
addresses can be learned on this port.
swL2PortSecurityControlEntry entry .1.3.6.1.4.1.171.11.105.1.2.7.1.1
A list of information contained in the swL2PortSecurityControlTable.
Indexes
swL2PortSecurityPortIndex
Column Syntax OID
swL2PortSecurityPortIndex
Indicates the secured port to lock address learning.
Integer32
Constraints:
range: 1-768
 .1.3.6.1.4.1.171.11.105.1.2.7.1.1.1
swL2PortSecurityMaxLernAddr
Indicates allowable number of addresses to be learned on this port.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.7.1.1.2
swL2PortSecurityMode
Indicates the mode of locking address.
In deleteOnTimeout(3) mode - the locked addresses can be aged out after
the aging timer expires. In this mode, when the locked address is aged
out, the number of addresses that ca…
Enumerationr/w
Enumerated Values:
1other
2permanent
3deleteOnTimeout
4deleteOnReset
 .1.3.6.1.4.1.171.11.105.1.2.7.1.1.3
swL2PortSecurityAdmState
Indicates administration state of locking address.
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.171.11.105.1.2.7.1.1.4
swL2PortSecurityEntryClearCtrl
Used to clear port security entries by port.
Setting this value to 'start' will execute the clear action,
Once cleared, the value returns to 'other'.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.105.1.2.7.1.1.5

swL2DhcpRelayCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.2.8.7 · 1 row entry · 3 columns
Open in standard view 
This table specifies the IP address as a destination to forward
(relay) DHCP packets to.
swL2DhcpRelayCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.2.8.7.1
A list of information that specifies the IP address as a destination
to forward (relay) DHCP packets to.
Indexes
swL2DhcpRelayCtrlInterfaceName swL2DhcpRelayCtrlServer
Column Syntax OID
swL2DhcpRelayCtrlInterfaceName
The name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.105.1.2.8.7.1.1
swL2DhcpRelayCtrlServer
The DHCP server IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.2.8.7.1.2
swL2DhcpRelayCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.105.1.2.8.7.1.3

swL2TrunkCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.2.9.3 · 1 row entry · 6 columns
Open in standard view 
This table specifies which ports group a set of ports(up to 8)
into a single logical link.
swL2TrunkCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.2.9.3.1
A list of information that specifies which ports group a set of
ports(up to 8) into a single logical link.
Indexes
swL2TrunkIndex
Column Syntax OID
swL2TrunkIndex
The index number of the logical port trunk group. The trunk group
number depends on the existence of unit and module.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.9.3.1.1
swL2TrunkMasterPort
The object indicates the master port number of the port trunk
entry. When using Port Trunk, you cannot configure the other
ports of the group except the master port.
Their configuration must be same as the master port …
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.2.9.3.1.3
swL2TrunkMember
Indicates the number of ports included in this Trunk group.
The trunk port number depends on the existence of the module.
The maximum number of ports is 8 for one trunk group.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.9.3.1.4
swL2TrunkFloodingPort
The object indicates the flooding port number of the port trunk
entry. The first port of the Trunk group is implicitly configured to
be the flooding port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.2.9.3.1.5
swL2TrunkType
This object indicates the type of trunk group.
static : is static trunk group
lacp : is LACP trunk group .
Enumerationr/w
Enumerated Values:
1other
2static
3lacp
 .1.3.6.1.4.1.171.11.105.1.2.9.3.1.6
swL2TrunkState
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.2.9.3.1.7

swL2TrunkLACPPortTable

table
.1.3.6.1.4.1.171.11.105.1.2.9.5 · 1 row entry · 2 columns
Open in standard view 
This table specifies which ports group a set of ports(up to 8)
into a single logical link.
swL2TrunkLACPPortEntry entry .1.3.6.1.4.1.171.11.105.1.2.9.5.1
A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.
Indexes
swL2TrunkLACPPortIndex
Column Syntax OID
swL2TrunkLACPPortIndex
The index of logical port LACP.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.9.5.1.1
swL2TrunkLACPPortState
The state of logical port LACP.
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.171.11.105.1.2.9.5.1.2

swL2TrunkVLANTable

table
.1.3.6.1.4.1.171.11.105.1.2.9.6 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the VLAN trunking feature of the device.
swL2TrunkVLANEntry entry .1.3.6.1.4.1.171.11.105.1.2.9.6.1
This object is used to configure the VLAN trunking settings for each port.
Indexes
swL2TrunkVLANPort
Column Syntax OID
swL2TrunkVLANPort
This object indicates the port being configured.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.9.6.1.1
swL2TrunkVLANState
The state of the logical port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.2.9.6.1.2

swL2IGMPCtrlTable

table
.1.3.6.1.4.1.171.11.105.1.2.11.4 · 1 row entry · 12 columns
Open in standard view 
The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, 
there is only one entry in the table, with an index of 1. If the            
VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12, 
with an index range from 1 to 12.
swL2IGMPCtrlEntry entry .1.3.6.1.4.1.171.11.105.1.2.11.4.1
The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
Indexes
swL2IGMPCtrlVid
Column Syntax OID
swL2IGMPCtrlVid
This object indicates the IGMP control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by management users.
If the VLAN is in Port-Base mode, the VID is arranged from 1 to 12, in a
…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.1
swL2IGMPQueryInterval
The frequency at which IGMP Host-Query packets are
transmitted on this switch.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.2
swL2IGMPMaxResponseTime
The maximum query response time on this switch.
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.3
swL2IGMPRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) packet losses.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.4
swL2IGMPLastMemberQueryInterval
The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages.
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.5
swL2IGMPHostTimeout
The timer value for sending IGMP query packets when none were
sent by the host on the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send the query messages if the
timer expires. Please ref…
Integer32r/w
Constraints:
range: 1-16711450
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.6
swL2IGMPRouteTimeout
The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages.
Integer32r/w
Constraints:
range: 1-16711450
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.7
swL2IGMPLeaveTimer
When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left.
Integer32r/w
Constraints:
range: 1-16711450
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.8
swL2IGMPQueryState
This object decides if the IGMP query is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.9
swL2IGMPCurrentState
This object indicates the current IGMP query state.
Enumeration
Enumerated Values:
1other
2querier
3non-querier
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.10
swL2IGMPCtrlState
This object indicates the status of this entry.

other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable(…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.11
swL2IGMPFastLeaveState
This object indicates the fast_leave status of this entry.

other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
value…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.171.11.105.1.2.11.4.1.12

swL2IGMPQueryInfoTable

table
.1.3.6.1.4.1.171.11.105.1.2.11.5 · 1 row entry · 3 columns
Open in standard view 
The table contains the number current IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device.
swL2IGMPQueryInfoEntry entry .1.3.6.1.4.1.171.11.105.1.2.11.5.1
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entry are all enabled.
Indexes
swL2IGMPInfoVid
Column Syntax OID
swL2IGMPInfoVid
This object indicates the VID of associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable).
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.5.1.1
swL2IGMPInfoQueryCount
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.5.1.2
swL2IGMPInfoTxQueryCount
This object indicates the send count of IGMP query messages, in
per-VLAN basis. In case of IGMP timer expiration, the switch
sends IGMP query packets to related VLAN member ports and
increment this object by 1.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.5.1.3

swL2IGMPInfoTable

table
.1.3.6.1.4.1.171.11.105.1.2.11.6 · 1 row entry · 5 columns
Open in standard view 
The table containing current IGMP information which was captured by            
this device, provided that swL2DevCtrlIGMPSnooping and          
swL2IGMPCtrlState of the associated VLAN entries are all enabled. 
Note that the priority of IGMP table entries is lower than the Filtering            
Table, i.e. if there is a table hash collision between entries in the 
IGMP Table and Filtering Table inside the switch's H/W address table, 
then Filtering Table entry overwrites the colliding entry of the IGMP Table.  
Also see the swL2FilterMgmt description.
swL2IGMPInfoEntry entry .1.3.6.1.4.1.171.11.105.1.2.11.6.1
Information about current IGMP information which was captured by
this device, provided that the swL2DevCtrlIGMPSnooping and the
swL2IGMPCtrlState of associated VLAN entries are all enabled.
Indexes
swL2IGMPVid swL2IGMPGroupIpAddr
Column Syntax OID
swL2IGMPVid
This object indicates the VID of individual IGMP table entries.
It shows the VID IGMP report information captured on the network.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.6.1.1
swL2IGMPGroupIpAddr
This object identifies group IP addresses which were captured from
IGMP packets, on a per-VLAN basis.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.2.11.6.1.2
swL2IGMPMacAddr
This object identifies MAC addresses which correspond
to the swL2IGMPGroupIpAddr, on per-VLAN basis.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.11.105.1.2.11.6.1.3
swL2IGMPPortMap
This object indicates which ports belong to the same
multicast group, on a per-VLAN basis. Each multicast group has an
octet string which is indicated by a port map. The most significant
bit rep…
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.11.6.1.4
swL2IGMPIpGroupReportCount
This object indicates how many report packets were receive by our
device, that correspond with this entry when the IGMP function is enabled
on per-VLAN basis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.6.1.5

swL2IGMPRouterPortTable

table
.1.3.6.1.4.1.171.11.105.1.2.11.7 · 1 row entry · 5 columns
Open in standard view 
The information of the router port table.
swL2IGMPRouterPortEntry entry .1.3.6.1.4.1.171.11.105.1.2.11.7.1
The entry of swL2IGMPRouterPortTable.
Indexes
swL2IGMPRouterPortVlanid
Column Syntax OID
swL2IGMPRouterPortVlanid
This object indicates the VLAN ID of the router port entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.105.1.2.11.7.1.1
swL2IGMPRouterPortVlanName
This object indicates the VLAN name of the router port entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.105.1.2.11.7.1.2
swL2IGMPRouterPortStaticPortList
This object indicates the static portlist of the router port entry.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.11.7.1.3
swL2IGMPRouterPortDynamicPortList
This object indicates the dynamic portlist of the router port entry.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.11.7.1.4
swL2IGMPRouterPortForbiddenPortList
This object indicates the forbidden portlist of the router port entry.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.11.7.1.5

swL2IGMPMulticastVlanTable

table
.1.3.6.1.4.1.171.11.105.1.2.11.8 · 1 row entry · 9 columns
Open in standard view 
The information of the IGMP snooping multicast VLAN table.
swL2IGMPMulticastVlanEntry entry .1.3.6.1.4.1.171.11.105.1.2.11.8.1
The entry of swL2IGMPMulticastVlanTable.
Indexes
swL2IGMPMulticastVlanid
Column Syntax OID
swL2IGMPMulticastVlanid
This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry.
Integer32
Constraints:
range: 2-4094
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.1
swL2IGMPMulticastVlanName
This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.2
swL2IGMPMulticastVlanSourcePort
This object indicate the portlist of the source ports of IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry. And the IGMP control messages received from the
member ports would be…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.3
swL2IGMPMulticastVlanMemberPort
This object indicate the portlist of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry. And the IGMP control messages received from the
member ports…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.4
swL2IGMPMulticastVlanTagMemberPort
This object indicate the portlist of the tag member ports of IGMP
snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.5
swL2IGMPMulticastVlanState
This object can be enabled or disabled IGMP_snooping multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.6
swL2IGMPMulticastVlanReplaceSourceIp
The replace source IP of this multicast vlan.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.7
swL2IGMPMulticastVlanRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.8
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction
This object indicates if remove all the multicast address
list from the IGMP multicast VLAN or not.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.105.1.2.11.8.1.9

swL2IGMPMulticastVlanGroupTable

table
.1.3.6.1.4.1.171.11.105.1.2.11.9 · 1 row entry · 4 columns
Open in standard view 
The table containing the IGMP snooping multicast VLAN group information
swL2IGMPMulticastVlanGroupEntry entry .1.3.6.1.4.1.171.11.105.1.2.11.9.1
Information about current IGMP snooping multicast VLAN group.
Indexes
swL2IGMPMulticastVlanGroupVid swL2IGMPMulticastVlanGroupFromIp swL2IGMPMulticastVlanGroupToIp
Column Syntax OID
swL2IGMPMulticastVlanGroupVid
This object indicates the Vid of IGMP snooping multicast VLAN group.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.11.9.1.1
swL2IGMPMulticastVlanGroupFromIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.2.11.9.1.2
swL2IGMPMulticastVlanGroupToIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.105.1.2.11.9.1.3
swL2IGMPMulticastVlanGroupStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.105.1.2.11.9.1.4

swL2IGMPAccessAuthTable

table
.1.3.6.1.4.1.171.11.105.1.2.11.13 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the IGMP Access Authentication
configurations of the device.
swL2IGMPAccessAuthEntry entry .1.3.6.1.4.1.171.11.105.1.2.11.13.1
A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.
Indexes
swL2IGMPAccessAuthPort
Column Syntax OID
swL2IGMPAccessAuthPort
The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.105.1.2.11.13.1.1
swL2IGMPAccessAuthState
This object denotes the status of IGMP Access Authentication of the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.2.11.13.1.2

swL2TrafficSegTable

table
.1.3.6.1.4.1.171.11.105.1.2.14.1 · 1 row entry · 2 columns
Open in standard view 
This table specifies that the port can just forward traffic to the 
specific port list.
swL2TrafficSegEntry entry .1.3.6.1.4.1.171.11.105.1.2.14.1.1
A list of information which specifies the port with its traffic
forwarding list.
Indexes
swL2TrafficSegPort
Column Syntax OID
swL2TrafficSegPort
The port number of the logical port.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.105.1.2.14.1.1.1
swL2TrafficSegForwardPorts
The port list to which the specific port can forward traffic.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.105.1.2.14.1.1.2

swL2MulticastFilterModeVlanTable

table
.1.3.6.1.4.1.171.11.105.1.2.17.1 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about VLAN multicast filter mode.
swL2MulticastFilterModeVlanEntry entry .1.3.6.1.4.1.171.11.105.1.2.17.1.1
A list of multicast filter mode information for each VLAN.
Indexes
swL2MulticastFilterVid
Column Syntax OID
swL2MulticastFilterVid
Indicates VID for each VLAN.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.2.17.1.1.1
swL2MulticastFilterVlanMode
Specifies multicast filter mode for each VLAN.
Enumerationr/w
Enumerated Values:
1forward-all-groups
2forward-unregistered-groups
3filter-unregistered-groups
 .1.3.6.1.4.1.171.11.105.1.2.17.1.1.2

swL2LoopDetectPortTable

table
.1.3.6.1.4.1.171.11.105.1.2.18.2.1 · 1 row entry · 4 columns
Open in standard view 
The table specifies the loopback detection function specified by port.
swL2LoopDetectPortEntry entry .1.3.6.1.4.1.171.11.105.1.2.18.2.1.1
The table specifies the loopback detection function specified by port.
Indexes
swL2LoopDetectPortIndex
Column Syntax OID
swL2LoopDetectPortIndex
This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.105.1.2.18.2.1.1.1
swL2LoopDetectPortState
This object indicates the loopback detection function state on the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.105.1.2.18.2.1.1.2
swL2LoopDetectPortLoopVLAN
This object indicates the VLAN list that has detected a loopback.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.105.1.2.18.2.1.1.3
swL2LoopDetectPortLoopStatus
This object indicates the port status.
Enumeration
Enumerated Values:
1normal
2loop
3error
4none
 .1.3.6.1.4.1.171.11.105.1.2.18.2.1.1.4

swL2DhcpLocalRelayVLANTable

table
.1.3.6.1.4.1.171.11.105.1.2.24.2 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the DHCP local relay status 
for each VLAN.
swL2DhcpLocalRelayVLANEntry entry .1.3.6.1.4.1.171.11.105.1.2.24.2.1
This object lists the current VLANs in the switch and their
corresponding DHCP local relay status.
Indexes
swL2DhcpLocalRelayVLANID
Column Syntax OID
swL2DhcpLocalRelayVLANID
This object shows the VIDs of the current VLANS in the switch.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.105.1.2.24.2.1.1
swL2DhcpLocalRelayVLANState
This object indicates the status of the DHCP relay function
of the VLAN.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.105.1.2.24.2.1.2