DELLEMC-OS10-PORT-SECURITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
18

os10PortSecurityIfConfigTable

table
.1.3.6.1.4.1.674.11000.5000.100.5.1.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk os10PortSecurityIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELLEMC-OS10-PORT-SECURITY-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecurityIfConfigTable' 
A table for Port Security configuration entries.  
The number of entries is determined by the number of 
interfaces in the system that can support the 
port security feature.
os10PortSecurityIfConfigEntry row .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1
Entry containing port security information for a
particular interface.
Indexes
No indexes recorded
Column Syntax OID
os10PortSecurityIfIndex
Index to this table.
The index value used to identify the port security configurations associated with this entry
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.1
os10PortSecurityIfPortSecurityEnable
This Mib object specifies if the port
security feature is enabled or not on an interface.
The value of this object has no effect when the value of
os10PortSecurityGlobalEnable is set to 'false'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.2
os10PortSecurityIfViolationStatus
This object represents the port security
status of an interface.

normal(1) - This indicates port is operating normally
without any violation.

macLearnLimitErrDisable(2) - This i…
Enumeration .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.3
os10PortSecurityIfSecureMacLearnLimit
The maximum number of MAC addresses to be secured on the interface.
User can secure a minimum of one and maximum of 3072 mac addresses on a port.
i.e set operation is allowed only with in range 1-3072.
If the newly co…
Unsigned32r/w .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.4
os10PortSecurityIfStationMoveEnable
This object is used to enable or disable
station movement on the dynamically secured
mac addresses learnt on the interface.
By default, this is set to false. It is not possible to enable
the station movement on a port w…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.5
os10PortSecurityIfMacViolationAction
Determines the action to be taken when
mac limit violation occurs in the system.

drop(1) - No further MAC learning is allowed on the interface.
Packets received with a source MAC address which…
Enumerationr/w .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.6
os10PortSecurityIfStmvViolationAction
Determines the action to be taken when
a secure dynamic mac address move violation occurs
in the system.

drop(1) - The MAC address that triggered the violation
shall not be lear…
Enumerationr/w .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.7
os10PortSecurityIfStickyEnable
Set to 'true' to enable and 'false' to disable Sticky port security feature
on this interface. Enabling this feature allows the
device to secure learnt MAC addresses on this interface permanently.
In order to remove …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.8
os10PortSecurityIfClearSecureMacAddresses
This object is used to delete
secure MAC addresses based on the specified
type.
SecureMacAddrTyper/w
Type Values:
0none
1dynamic
2sticky
3all
 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.9
os10PortSecurityIfSecureMacAgeEnable
This object is used to enable aging of
the dynamically secured mac addresses learnt
on the interface. Sticky and static macs will
never age out. It is not possible to enable aging
on a port on which sticky feature is…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.10
os10PortSecurityIfTotalSecureAddresses
The total number of secured MAC addresses learnt (dynamic or stickt)
or configured (static) on a particular interface.
Integer32 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.11
os10PortSecurityIfTotalSecureDynamicAddresses
The total number of secure dynamic MAC addresses learnt on a particular
interface.
Integer32 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.12
os10PortSecurityIfTotalSecureStickyAddresses
The total number of secure sticky MAC addresses learnt on a particular
interface.
Integer32 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.13
os10PortSecurityIfTotalSecureStaticAddresses
The total number of secure static MAC addresses configured on a particular
interface.
Integer32 .1.3.6.1.4.1.674.11000.5000.100.5.1.2.1.1.14

os10PortSecuritySecureMacAddrTable

table
.1.3.6.1.4.1.674.11000.5000.100.5.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk os10PortSecuritySecureMacAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELLEMC-OS10-PORT-SECURITY-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELLEMC-OS10-PORT-SECURITY-MIB::os10PortSecuritySecureMacAddrTable' 
A table containing the list of
secure MAC addresses.
os10PortSecuritySecureMacAddrEntry row .1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1
Entry containing secure MAC address
information for a particular interface.
Indexes
No indexes recorded
Column Syntax OID
os10PortSecuritySecureMacVlanId
This is the vlan on which the
os10PortSecuritySecureMacAddress is
configured or learnt.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.1
os10PortSecuritySecureMacAddress
This is a secure MAC
address configured or learnt on an
interface.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.2
os10PortSecuritySecureMacIfIndex
This is the interface on which the
os10PortSecuritySecureMacAddress is
configured or learnt.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.3
os10PortSecuritySecureMacAddrType
This object indicates if the secure MAC address
is a configured 'static' or learnt 'dynamic' or
learnt and retained across reboots 'sticky'.
Enumeration .1.3.6.1.4.1.674.11000.5000.100.5.1.3.1.1.4