DELL-RAC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
198

drsCMCPowerTable

table mandatory
.1.3.6.1.4.1.674.10892.2.4.1 · 1 row entry · 14 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk drsCMCPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::drsCMCPowerTable' 
0004.0001 This object defines the CMC power table.
drsCMCPowerTableEntry row .1.3.6.1.4.1.674.10892.2.4.1.1
0004.0001.0001 This object defines the CMC power table entry.
Indexes
Column Syntax OID
drsChassisIndexmandatory
0004.0001.0001.0001 This attribute defines the index
(one-based) of the associated chassis.
DellCMCPowerIndexRange
Type Constraints:
range: 1
 .1.3.6.1.4.1.674.10892.2.4.1.1.1
drsPotentialPowermandatory
0004.0001.0001.0002 This attribute defines the power (in Watts) required by
the chassis infrastructure, plus the sum of the maximum power requirements
for all currently powered-on servers.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.2
drsIdlePowermandatory
0004.0001.0001.0003 This attribute defines the power (in Watts) required by
the chassis infrastructure, plus the sum of the minimum power requirements
for all currently powered-on servers.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.3
drsMaxPowerSpecificationmandatory
0004.0001.0001.0004 This attribute defines the power limit (in Watts)
at which server throttling will take place.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.4
drsPowerSurplusmandatory
0004.0001.0001.0005 This attribute defines the power surplus (in Watts)
remaining above the drsPotentialPower reading.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.5
drsKWhCumulativemandatory
0004.0001.0001.0006 This attribute defines the cumulative chassis power
usage (in KWh) since last reset.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.6
drsKWhCumulativeTimemandatory
0004.0001.0001.0007 This attribute defines the timestamp of the most recent
chassis power accumulator reset.
DellTimestamp
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.7
drsWattsPeakUsagemandatory
0004.0001.0001.0008 This attribute defines the chassis peak power
usage (in Watts) since last reset.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.8
drsWattsPeakTimemandatory
0004.0001.0001.0009 This attribute defines the timestamp of the most recent
chassis peak power usage.
DellTimestamp
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.9
drsWattsMinUsagemandatory
0004.0001.0001.0010 This attribute defines the chassis mimimum power
usage (in Watts) since last reset.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.10
drsWattsMinTimemandatory
0004.0001.0001.0011 This attribute defines the timestamp of the most recent
chassis minimum power usage.
DellTimestamp
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.11
drsWattsResetTimemandatory
0004.0001.0001.0012 This attribute defines the timestamp of the most recent
reset of the chassis min/peak Watts readings.
DellTimestamp
Type Constraints:
range: 26
 .1.3.6.1.4.1.674.10892.2.4.1.1.12
drsWattsReadingmandatory
0004.0001.0001.0013 This attribute defines the instantaneous chassis power
usage (in Watts).
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.13
drsAmpsReadingmandatory
0004.0001.0001.0014 This attribute defines the instantaneous chassis current
usage (in Watts).
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.1.1.14

drsCMCPSUTable

table mandatory
.1.3.6.1.4.1.674.10892.2.4.2 · 1 row entry · 7 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk drsCMCPSUTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::drsCMCPSUTable' 
0004.0002 This object defines the CMC PSU table.
drsCMCPSUTableEntry row .1.3.6.1.4.1.674.10892.2.4.2.1
0004.0002.0001 This object defines the CMC PSU table entry.
Indexes
Column Syntax OID
drsPSUChassisIndexmandatory
0004.0002.0001.0001 This attribute defines the index
(one-based) of the associated chassis.
DellCMCPowerIndexRange
Type Constraints:
range: 1
 .1.3.6.1.4.1.674.10892.2.4.2.1.1
drsPSUIndexmandatory
0004.0002.0001.0002 This attribute defines the index
(one-based) of the associated CMC PSU.
DellCMCPSUIndexRange
Type Constraints:
range: 1..6
 .1.3.6.1.4.1.674.10892.2.4.2.1.2
drsPSULocationmandatory
0004.0002.0001.0003 This attribute defines the location
of the CMC PSU.
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.4.2.1.3
drsPSUMonitoringCapablemandatory
0004.0002.0001.0004 This attribute defines the PSU Monitoring
capabilities, or the absence of a PSU in this location.
DellCMCPSUCapable
Type Values:
1absent
2none
3basic
 .1.3.6.1.4.1.674.10892.2.4.2.1.4
drsPSUVoltsReadingmandatory
0004.0002.0001.0005 This attribute defines the instantaneous
PSU Voltage reading.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.2.1.5
drsPSUAmpsReadingmandatory
0004.0002.0001.0006 This attribute defines the instantaneous
PSU Current reading.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.2.1.6
drsPSUWattsReadingmandatory
0004.0002.0001.0007 This attribute defines the instantaneous
PSU Wattage reading.
DellPowerReading
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.674.10892.2.4.2.1.7

drsCMCServerTable

table mandatory
.1.3.6.1.4.1.674.10892.2.5.1 · 1 row entry · 12 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk drsCMCServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::drsCMCServerTable' 
0005.0001 This object defines the CMC server table.
drsCMCServerTableEntry row .1.3.6.1.4.1.674.10892.2.5.1.1
0005.0001.0001 This object defines the CMC server table entry.
Indexes
Column Syntax OID
drsServerIndexmandatory
0005.0001.0001.0001 This attribute defines the index
(one-based) of the associated CMC server.
DellCMCServerIndexRange
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.674.10892.2.5.1.1.1
drsServerMonitoringCapablemandatory
0005.0001.0001.0002 This attribute defines the server monitoring
capabilities, or the absence of a server in this location.
DellCMCServerCapable
Type Values:
1absent
2none
3basic
4off
 .1.3.6.1.4.1.674.10892.2.5.1.1.2
drsServerServiceTagmandatory
0005.0001.0001.0003 This attribute defines the Service Tag
of the CMC server.
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.3
drsServerSlotNamemandatory
0005.0001.0001.0004 This attribute defines the Slot Name
of the CMC server.
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.4
drsServerSlotNumbermandatory
0005.0001.0001.0005 This attribute defines the Chassis
Slot Number of the CMC server.
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.5
drsServerNodeIDmandatory
0005.0001.0001.0006 This attribute defines the Node ID
of the CMC server. The Node ID provides a unique identifier
for the server.
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.6
drsServerModelmandatory
0005.0001.0001.0007 This attribute defines the Model
of the CMC server.
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.7
drsServerAssetTagmandatory
0005.0001.0001.0008 This attribute defines the Asset Tag
of the CMC server.
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.8
drsServerNumStorageControllersmandatory
0005.0001.0001.0009 This attribute defines the number of
storage controllers on the storage sled. The value
will be zero if this is not a storage sled.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.5.1.1.9
drsServerStorageModemandatory
0005.0001.0001.0010 This attribute defines the Storage
Mode of the storage sled.
DellCMCServerStorageMode
Type Values:
1notApplicable
2joined
3splitDualHost
4splitSingleHost
99unknown
 .1.3.6.1.4.1.674.10892.2.5.1.1.10
drsServerIntrusionStatemandatory
0005.0001.0001.0011 This attribute defines the Intrusion
State of the CMC server if supported by the server.
DellCMCServerIntrusionState
Type Values:
1notApplicable
2closed
3open
99unknown
 .1.3.6.1.4.1.674.10892.2.5.1.1.11
drsServerAssignedServerSlotsmandatory
0005.0001.0001.0012 This attribute defines the the server
slots to which a storage sled is assigned. If this is
a storage sled that is assigned to one more or more
server slots, the value will be a comma-separated list…
DellString
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.674.10892.2.5.1.1.12

controllerTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.1 · 1 row entry · 38 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk controllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::controllerTable' 
A table of managed RAID controllers. The number of entries
is related to number of RAID controllers discovered in the
system. The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
controllerTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1
An entry in the table of RAID controllers. A row in this table
cannot be created or deleted by SNMP operations on columns of
the table.
Indexes
Column Syntax OID
controllerNumbermandatory
Instance number of this controller entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.1
controllerNamemandatory
The controller's name as represented in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.2
controllerRebuildRatemandatory
The rebuild rate is the percentage of the controller's
resources dedicated to rebuilding a failed disk when a rebuild
is necessary.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.7
controllerFWVersionmandatory
The controller's current firmware version.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.8
controllerCacheSizeInMBmandatory
The controller's current amount of cache memory in megabytes.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.9
controllerRollUpStatusmandatory
Severity of the controller state.
This is the combined status of the controller and its components.
Possible values:
1: Other.
2: Unknown.
3: OK
4: Non-critical
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.37
controllerComponentStatusmandatory
The status of the controller itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.38
controllerDriverVersionmandatory
Currently installed driver version for this controller on the host.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.41
controllerPCISlotmandatory
The PCI slot on the server where the controller is seated. This
data is not reported for embedded or integrated controllers,
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.42
controllerReconstructRatemandatory
The reconstruct rate is the percentage of the controller's resources
dedicated to reconstructing a disk group after adding a physical disk
or changing the RAID level of a virtual disk residing on the disk
group.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.48
controllerPatrolReadRatemandatory
The patrol read rate is the percentage of the controller's
resources dedicated to perform a patrol read on disks participating
in a virtual disk or hot spares.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.49
controllerBGIRatemandatory
The background initialization (BGI) rate is the percentage of the
controller's resources dedicated to performing the background
initialization of a redundant virtual disk after it is created.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.50
controllerCheckConsistencyRatemandatory
The check consistency rate is the percentage of the
controller's resources dedicated to performing a check consistency
on a redundant virtual disk.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.51
controllerPatrolReadModemandatory
Identifies the patrol read mode setting for the controller.
Possible values:
1: Not one of the following or could not be determined.
2: Not Supported on this controller.
3: Disabled.
4: Automatic.
5: Manual.
Enumeration
Enumerated Values:
1other
2notSupported
3disabled
4auto
5manual
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.52
controllerPatrolReadStatemandatory
This property displays the current state of the patrol read process.
Possible values:
1: Not one of the following or could not be determined.
2: Patrol read is not running.
3: Patrol read is running.
Enumeration
Enumerated Values:
1other
2stopped
3active
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.53
controllerPersistentHotSparemandatory
Indicates whether hot spare drives would be restored on insertion
into the same slot.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.59
controllerSpinDownUnconfiguredDrivesmandatory
Indicates whether un-configured drives would be put in power
save mode by the controller.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.60
controllerSpinDownHotSpareDrivesmandatory
Indicates whether hot spare drives would be put in power
save mode by the controller.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.61
controllerSpinDownTimeIntervalmandatory
The duration in minutes after which, the unconfigured or hot
spare drives will be spun down to power save mode.
Integer32
Constraints:
range: 30-1440
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.62
controllerPreservedCachemandatory
Indicates whether preserved cache or pinned cache is
present on the controller.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.69
controllerCheckConsistencyModemandatory
The current check consistency mode setting
for the controller.
Possible values:
1: Not one of the following.
2: Not supported on this controller.
3: Normal check consistency operation.
4: Check consistency operation wi…
Enumeration
Enumerated Values:
1other
2unsupported
3normal
4stopOnError
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.70
controllerCopyBackModemandatory
The current copy back mode setting
for the controller.
Possible values:
1: Not one of the following.
2: Not supported on this controller.
3: Disks assigned as spares could revert back to spare status.
4: Data from phys…
Enumeration
Enumerated Values:
1other
2unsupported
3on
4onWithSmart
5off
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.71
controllerSecurityStatusmandatory
The controller's current security/encryption status..
Possible values:
1: The current status could not be determined.
2: Controller is not operating in an encryption mode.
3: Controller is operating in the Local Key Man…
Enumeration
Enumerated Values:
1unknown
2none
3lkm
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.72
controllerEncryptionKeyPresentmandatory
Indicates whether encryption key is assigned for the controller.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.73
controllerEncryptionCapabilitymandatory
The type of encryption supported by the controller.
Possible values:
1: Not one of the following.
2: No encryption supported,
3: Local Key Management,
Enumeration
Enumerated Values:
1other
2none
3lkm
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.74
controllerLoadBalanceSettingmandatory
The ability of the controller to automatically use both
controller ports (or connectors) connected to the same enclosure in
order to route I/O requests.
Possible values:
1: Not one of the following.
2: Not supported.
…
Enumeration
Enumerated Values:
1other
2unsupported
3auto
4none
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.75
controllerMaxCapSpeedmandatory
The maximum speed of the controller.in
Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: 12.0 Gbps
Enumeration
Enumerated Values:
1unknown
2oneDotFiveGbps
3threeGbps
4sixGbps
5twelveGbps
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.76
controllerSASAddressmandatory
The SAS address of the controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.77
controllerFQDDmandatory
The controller's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.78
controllerDisplayNamemandatory
The controller's friendly FQDD as represented in Storage
Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.79
controllerT10PICapabilitymandatory
Indicates whether the controller supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one of the following.
2: Capable of supporting T1…
Enumeration
Enumerated Values:
1other
2capable
3notCapable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.80
controllerRAID10UnevenSpansSupportedmandatory
Indicates whether uneven spans for RAID 10 virtual disk
is supported on the controller.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.81
controllerEnhancedAutoImportForeignConfigModemandatory
Indicates the status of enhanced auto-import of foreign
configuration property of the controller.
1: Not one of the following.
2: Not Supported.
3: Disabled.
4: Enabled.
Enumeration
Enumerated Values:
1other
2notSupported
3disabled
4enabled
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.82
controllerBootModeSupportedmandatory
Indicates whether headless boot mode settings are supported
on the controller.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.83
controllerBootModemandatory
Indicates the boot mode of the controller.
Possible values:
1: Not applicable for this controller.
2: User mode: User interaction required for all boot messages (not
applicable for uEFI environments).
3: Continue Boot …
Enumeration
Enumerated Values:
1notApplicable
2user
3contOnError
4headlessContOnError
5headlessSafe
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.84
controllerHighAvailabilityModemandatory
Indicates the fault-tolerant mode of the controller.
Possible values:
1: None
2: Fault Tolerant(Active/Passive)
3: Fault Tolerant(Active/Active)
4: Degraded
Enumeration
Enumerated Values:
1none
2faultTolerantActivePassive
3faultTolerantActiveActive
4degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.85
controllerPeerControllermandatory
The peer controller's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.86
controllerEncryptionKeyIdentifiermandatory
Displays the encryption security key identifier of the controller, if the
controller is encryption enabled and a security key is configured for the
controller.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.87

enclosureTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.3 · 1 row entry · 22 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk enclosureTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::enclosureTable' 
A table of managed enclosures/backplanes. The number of entries is 
related to number of internal backplane(s) discovered in the system 
and external storage enclosure(s) attached to the system..
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1
An entry in the enclosure table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
Column Syntax OID
enclosureNumbermandatory
Instance number of this enclossre/backplane.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.1
enclosureNamemandatory
The enclosure/backplane's name as represented in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.2
enclosureStatemandatory
The current state of this enclosure/backplane.
Possible states:
1: The current state could not be determined.
2: The enclosure is operating normally.
3: The enclosure has encountered a hardware problem or is not
respon…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
6foreign
7offline
8online
9blocked
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.4
enclosureServiceTagmandatory
Enclosure identification used when consulting customer support.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.8
enclosureAssetTagmandatory
The asset tag information for the enclosure.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.9
enclosureConnectedPortmandatory
The port on the controller to which the
storage enclosure is connected.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.19
enclosureRollUpStatusmandatory
Severity of the enclosure/backplane state.
This is the combined status of the enclosure and its sub-components.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical.
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.23
enclosureComponentStatusmandatory
The status of the enclosure/backplane.itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.24
enclosureFirmwareVersionmandatory
The firmware information for the enclosure/backplane.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.26
enclosureSASAddressmandatory
The SAS address of the enclosure/backplane.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.30
enclosureDriveCountmandatory
The number of disks present in the enclosure/backplane.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.31
enclosureTotalSlotsmandatory
The total physical drive slots in a storage enclosure
or server backplane.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.32
enclosureFanCountmandatory
The number of fans present in the storage enclosure.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.40
enclosurePSUCountmandatory
The number of Power Supply Units (PSU) present
in the storage enclosure.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.41
enclosureEMMCountmandatory
The number of Enclosure Management Modules (EMM)
present in the storage enclosure.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.42
enclosureTempProbeCountmandatory
The number of temperature sensing devices
present in the storage enclosure.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.43
enclosureRedundantPathmandatory
Indicates whether the controller has multiply paths to
reach the storage enclosure.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.44
enclosurePositionmandatory
The possition of the storage enclosure within a daisy chain.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.45
enclosureBackplaneBayIDmandatory
The unique bay ID of the backplane.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.46
enclosureFQDDmandatory
The enclosure/backplane's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.47
enclosureDisplayNamemandatory
The enclosure/backplane's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.48
enclosureTypemandatory
The protocol supported by the backplane.
Possible states:
1: Not one of the following or could not be determined.
2: Not applicable (i.e. object is not a backplane).
3: Supports SAS/SATA.
4: Supports PCIe.
5: Both SAS/S…
Enumeration
Enumerated Values:
1other
2notApplicable
3sassata
4pcie
5universal
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.49

physicalDiskTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.4 · 1 row entry · 38 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk physicalDiskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::physicalDiskTable' 
A table of managed physical disks. The number of entries is 
related to number of physical Disks discovered in the system.
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to 
all entries.
physicalDiskTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1
An entry in the physical Disk table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
Column Syntax OID
physicalDiskNumbermandatory
Instance number of this physical disk entry.
Integer32
Constraints:
range: 1-1000000000
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.1
physicalDiskNamemandatory
The physical disk's name as represented in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.2
physicalDiskManufacturermandatory
The name of the physical disk's manufacturer.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.3
physicalDiskStatemandatory
The current state of this physical disk.
Possible states:
1: The current state could not be determined.
2: The physical disk is available for use, but no RAID configuration
has been assigned.
3: A RAID configuration h…
Enumeration
Enumerated Values:
1unknown
2ready
3online
4foreign
5offline
6blocked
7failed
8nonraid
9removed
10readonly
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.4
physicalDiskProductIDmandatory
The model number of the physical disk.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.6
physicalDiskSerialNomandatory
The physical disk's unique identification number
from the manufacturer.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.7
physicalDiskRevisionmandatory
The firmware version of the physical disk.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.8
physicalDiskCapacityInMBmandatory
The size of the physical disk in megabytes.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.11
physicalDiskUsedSpaceInMBmandatory
The amount of used space in megabytes on the physical
disk. This is not applicable for NVMe devices.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.17
physicalDiskFreeSpaceInMBmandatory
The amount of free space in megabytes on the physical
disk. This is not applicable for NVMe devices.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.19
physicalDiskBusTypemandatory
The bus type of the physical disk.
Possible values:
1: The bus type could not be determined.
2: Small Computer System Interface (SCSI).
3: Serial Attached SCSI (SAS).
4: Serial Advanced Technology Attachment (SATA).
5: …
Enumeration
Enumerated Values:
1unknown
2scsi
3sas
4sata
5fibre
6pcie
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.21
physicalDiskSpareStatemandatory
The status of the disk as a spare.
Possible values:
1: Physical disk is not a spare.
2: Physical disk is a dedicated hot spare.
3: Physical disk is a global hot spare.
Enumeration
Enumerated Values:
1notASpare
2dedicatedHotSpare
3globalHotSpare
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.22
physicalDiskComponentStatusmandatory
The status of the physical disk itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.24
physicalDiskPartNumbermandatory
The part number of the disk.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.27
physicalDiskSASAddressmandatory
The SAS address of the physical disk.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.28
physicalDiskNegotiatedSpeedmandatory
The data transfer speed that the disk negotiated while spinning up
in Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: 12.0 Gbps
6: 5 GT/s (applic…
Enumeration
Enumerated Values:
1unknown
2oneDotFiveGbps
3threeGbps
4sixGbps
5twelveGbps
6fiveGTps
7eightGTps
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.29
physicalDiskCapableSpeedmandatory
The maximum data transfer speed supported by the disk
in Gigbits per second (Gbps).
Possible values:
1: The speed could not be determined.
2. 1.5 Gbps
3: 3.0 Gbps
4: 6.0 Gbps
5: 12.0 Gbps
6: 5 GT/s (applicable for NVMe…
Enumeration
Enumerated Values:
1unknown
2oneDotFiveGbps
3threeGbps
4sixGbps
5twelveGbps
6fiveGTps
7eightGTps
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.30
physicalDiskSmartAlertIndicationmandatory
Indicates whether the physical disk has received a predictive
failure alert.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.31
physicalDiskManufactureDaymandatory
The day of the week (1=Sunday thru 7=Saturday)
on which the physical disk was manufactured.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.32
physicalDiskManufactureWeekmandatory
The week (1 thru 53) in which the physical disk
was manufactured.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.33
physicalDiskManufactureYearmandatory
The four digit year in which the physical disk was manufactured.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.34
physicalDiskMediaTypemandatory
The media type of the physical disk.
Possible Values:
1: The media type could not be determined.
2: Hard Disk Drive (HDD).
3: Solid State Device (SSD).
Enumeration
Enumerated Values:
1unknown
2hdd
3ssd
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.35
physicalDiskPowerStatemandatory
The power state of the physical disk.
Possible Values:
1: Not one of the following.
2: The physical disk is in the spun up state.
3: The physical disk is in the spun down state.
4: The physical disk is changing from spu…
Enumeration
Enumerated Values:
1other
2spunUp
3spunDown
4transition
5on
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.42
physicalDiskRemainingRatedWriteEndurancemandatory
This property is applicable to SSD media type only. This indicates
the wear-out percentage of the SSD. Typically it is a value between
0 to 100. However, if the value is not available or not applicable
(in the case o…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.49
physicalDiskOperationalStatemandatory
The state of the physical disk when there are progressive
operations ongoing.
Possible values:
1: There is no active operation running.
2: Data from a redundant virtual disk is
currently being rebuilt onto the physical…
Enumeration
Enumerated Values:
1notApplicable
2rebuild
3clear
4copyback
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.50
physicalDiskProgressmandatory
The progress percentage of the operation that is being
performed on the physical disk. This is applicable
only if there is a progressive operations ongoing
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.51
physicalDiskSecurityStatusmandatory
The security/encryption status of the physical disk.
Possible Values:
1: The physical disk supports encryption.
2: The physical disk does not support encryption
3: The physical disk is encrypted.
4: The physical disk is…
Enumeration
Enumerated Values:
1supported
2notSupported
3secured
4locked
5foreign
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.52
physicalDiskFormFactormandatory
The form factor of the physical disk.
Possible values:
1: The form factor could not be determined.
2: 1.8 inch.
3: 2.5 inch.
4: 3.5 inch.
Enumeration
Enumerated Values:
1unknown
2oneDotEight
3twoDotFive
4threeDotFive
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.53
physicalDiskFQDDmandatory
The physical disk's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.54
physicalDiskDisplayNamemandatory
The physical disk's friendly FQDD as represented in Storage
Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.55
physicalDiskT10PICapabilitymandatory
Indicates whether the physical disk supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one of the following.
2: Capable of supportin…
Enumeration
Enumerated Values:
1other
2capable
3notCapable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.57
physicalDiskBlockSizeInBytesmandatory
The block size (in bytes) of the physical disk. This is not
applicable for NVMe devices.
Possible values:
1: 512.
2: 4096
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.58
physicalDiskProtocolVersionmandatory
Applicable for NVMe devices only. The NVMe protocol version supported
by the device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.59
physicalDiskPCIeNegotiatedLinkWidthmandatory
Applicable for NVMe devices only. The PCIe link width negotiated with the host
during device initialization.
Enumeration
Enumerated Values:
1other
2notApplicable
3byOne
4byTwp
5byFour
6byEight
7bySixteen
8byThirtyTwp
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.60
physicalDiskPCIeCapableLinkWidthmandatory
Applicable for NVMe devices only. The PCIe link widths the device is capable of
supporting.
Enumeration
Enumerated Values:
1other
2notApplicable
3byOne
4byTwp
5byFour
6byEight
7bySixteen
8byThirtyTwp
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.61
physicalDiskCurrentActiveControllermandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the current active controller.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.62
physicalDiskFailoverControllermandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the failover controller.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.63
physicalDiskForeignKeyIdentifiermandatory
Displays the encryption key identifier of the physical disk if it is in
locked or foreign state.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.4.1.64

enclosureFanTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.7 · 1 row entry · 7 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk enclosureFanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::enclosureFanTable' 
A table of managed fans in the external storage enclosure(s). 
The number of entries is related to number of fans discovered in 
the enclosure(s). The maximum number of entries is implementation 
dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureFanTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1
An entry in the fan table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
Column Syntax OID
enclosureFanNumbermandatory
Instance number of this fan.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.1
enclosureFanNamemandatory
The fan's name as represented in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.2
enclosureFanStatemandatory
The current state of this fan.
Possible states:
1: The current state could not be determined.
2: The fan is operating normally.
3: The fan has encountered a hardware problem or is not
responding.
4: The fan is no longe…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.4
enclosureFanSpeedmandatory
Indicates the current relative speed of the fan in RPMs.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.11
enclosureFanComponentStatusmandatory
The status of the fan itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.15
enclosureFanFQDDmandatory
The fan's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.20
enclosureFanDisplayNamemandatory
The fan's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.7.1.21

enclosurePowerSupplyTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.9 · 1 row entry · 7 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk enclosurePowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::enclosurePowerSupplyTable' 
A table of managed Power Supply Units(PSU) in the external 
storage enclosure(s). The number of entries is related to number 
of power supply unit(s) discovered in the enclosure(s). The 
maximum number of entries is implementation 
dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosurePowerSupplyTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1
An entry in the power supply unit table. A row in this table cannot
be created or deleted by SNMP operations on columns of the table.
Indexes
Column Syntax OID
enclosurePowerSupplyNumbermandatory
Instance number of this power supply unit.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.1
enclosurePowerSupplyNamemandatory
The power supply unit's name as represented in
Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.2
enclosurePowerSupplyStatemandatory
The current state of this power supply unit.
Possible states:
1: The current state could not be determined.
2: The power supply unit is operating normally.
3: The power supply unit has encountered a hardware problem
or…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.4
enclosurePowerSupplyPartNumbermandatory
The part number of the power supply unit.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.7
enclosurePowerSupplyComponentStatusmandatory
The status of the power supply unit itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.9
enclosurePowerSupplyFQDDmandatory
The power supply unit's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.15
enclosurePowerSupplyDisplayNamemandatory
The power supply unit's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.16

enclosureTemperatureProbeTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.11 · 1 row entry · 11 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk enclosureTemperatureProbeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::enclosureTemperatureProbeTable' 
A table of managed temperature probes in the external storage
enclosure(s). The number of entries is related to number of 
temperature probes discovered in the enclosure(s). The maximum 
number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureTemperatureProbeTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1
An entry in the temperature probe table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
Column Syntax OID
enclosureTemperatureProbeNumbermandatory
Instance number of this temperature probe.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.1
enclosureTemperatureProbeNamemandatory
The temperature probe's name as represented in
Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.2
enclosureTemperatureProbeStatemandatory
The current state of this temperature probe.
Possible states:
1: The current state could not be determined.
2: The temperature probe is operating normally.
3: The temperature probe has encountered a hardware problem
or…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
6overWarning
7underWarning
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.4
enclosureTemperatureProbeMinWarningValuemandatory
The minimum temperature that will force the probe into
a warning state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.7
enclosureTemperatureProbeMinCriticalValuemandatory
The minimum temperature that will force the probe into
a error state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.8
enclosureTemperatureProbeMaxWarningValuemandatory
The maximum temperature that will force the probe into
a warning state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.9
enclosureTemperatureProbeMaxCriticalValuemandatory
The maximum temperature that will force the probe into
a warning state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.10
enclosureTemperatureProbeCurValuemandatory
The maximum temperature that will force the probe into
a warning state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.11
enclosureTemperatureProbeComponentStatusmandatory
The status of the enclosure management module.itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.13
enclosureTemperatureProbeFQDDmandatory
The temperature probe's Fully Qualified Device Descriptor (FQDD)
as represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.15
enclosureTemperatureProbeDisplayNamemandatory
The temperature probe's friendly FQDD as represented
in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.11.1.16

enclosureManagementModuleTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.13 · 1 row entry · 8 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk enclosureManagementModuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::enclosureManagementModuleTable' 
A table of managed Enclosure Management Modules (EMM) 
in the external storage enclosure(s). The number of 
entries is related to number of enclosure management modules
discovered in the enclosure(s). The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
enclosureManagementModuleTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1
An entry in the enclosure management module table. A row in
this table cannot be created or deleted by SNMP operations
on columns of the table.
Indexes
Column Syntax OID
enclosureManagementModuleNumbermandatory
Instance number of this enclosure management module.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.1
enclosureManagementModuleNamemandatory
The enclosure management module's name as
represented in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.2
enclosureManagementModuleStatemandatory
The current state of this enclosure management module.
Possible states:
1: The current state could not be determined.
2: The enclosure management module is operating normally.
3: The enclosure management module has enco…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4missing
5degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.4
enclosureManagementModulePartNumbermandatory
The part number of the enclosure management module.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.6
enclosureManagementModuleFWVersionmandatory
Firmware version of the enclosure management module.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.8
enclosureManagementModuleComponentStatusmandatory
The status of the enclosure management module.itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.11
enclosureManagementModuleFQDDmandatory
The enclosure management module's Fully Qualified Device
Descriptor (FQDD) as represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.15
enclosureManagementModuleDisplayNamemandatory
The enclosure management module's friendly FQDD as represented in
Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.13.1.16

batteryTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.130.15 · 1 row entry · 6 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk batteryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::batteryTable' 
A table of managed batteries. The number of 
entries is related to number of Batteries
discovered in the system.  The maximum number of entries 
is implementation dependent.
Note: The properties in this table may not be applicable to all 
entries.
batteryTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1
An entry in the battery table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
Column Syntax OID
batteryNumbermandatory
Instance number of this battery entry.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.1
batteryStatemandatory
Current state of battery.
Possible values:
1: The current state could not be determined.
2: The battery is operating normally.
3: The battery has failed and needs to be replaced.
4: The battery temperature is high or ch…
Enumeration
Enumerated Values:
1unknown
2ready
3failed
4degraded
5missing
6charging
7belowThreshold
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.4
batteryComponentStatusmandatory
The status of the battery itself without the
propagation of any contained component status.
Possible values:
1: Other
2: Unknown
3: OK
4: Non-critical
5: Critical
6: Non-recoverable
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.6
batteryPredictedCapacityobsolete
This entry is obsolete. Use the batteryComponentStatus or
batteryState instead.
Enumeration
Enumerated Values:
1unknown
2failed
3ready
 .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.10
batteryFQDDmandatory
The battery's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.20
batteryDisplayNamemandatory
The battery's friendly FQDD as represented in Storage Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.21

virtualDiskTable

table mandatory
.1.3.6.1.4.1.674.10892.2.6.1.20.140.1 · 1 row entry · 28 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk virtualDiskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-RAC-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-RAC-MIB::virtualDiskTable' 
A table of managed virtual disks. The number of entries is related
to number of virtual disks discovered in the system. 
The maximum number of entries is implementation dependent.
Note: The properties in this table may not be applicable to all
entries.
virtualDiskTableEntry row .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1
An entry in the virtual disk table. A row in this table cannot be
created or deleted by SNMP operations on columns of the table.
Indexes
Column Syntax OID
virtualDiskNumbermandatory
Instance number of this virtual disk entry.
Integer32
Constraints:
range: 1-100000000
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.1
virtualDiskNamemandatory
The virtual disk's label as entered by the user.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.2
virtualDiskStatemandatory
The current state of this virtual disk
(which includes any member physical disks.)
Possible states:
1: The current state could not be determined.
2: The virtual disk is operating normally or optimally.
3: The virtual di…
Enumeration
Enumerated Values:
1unknown
2online
3failed
4degraded
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.4
virtualDiskSizeInMBmandatory
The size of the virtual disk in megabytes.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.6
virtualDiskWritePolicymandatory
The write policy used by the controller for write operations on
this virtual disk.
Possible values:
1: Write Through.
2: Write Back.
3: Force Write Back.
Enumeration
Enumerated Values:
1writeThrough
2writeBack
3writeBackForce
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.10
virtualDiskReadPolicymandatory
The read policy used by the controller for read operations on
this virtual disk.
Possible values:
1: No Read Ahead.
2: Read Ahead.
3: Adaptive Read Ahead.
Enumeration
Enumerated Values:
1noReadAhead
2readAhead
3adaptiveReadAhead
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.11
virtualDiskLayoutmandatory
The virtual disk's RAID type.
Possible values:
1: Not one of the following
2: RAID-0
3: RAID-1
4: RAID-5
5: RAID-6
6: RAID-10
7: RAID-50
8: RAID-60
9: Concatenated RAID 1
10: Concatenated RAID 5
Enumeration
Enumerated Values:
1other
2r0
3r1
4r5
5r6
6r10
7r50
8r60
9concatRaid1
10concatRaid5
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.13
virtualDiskStripeSizemandatory
The stripe size of this virtual disk.
Possible values:
1: Not one of the following
2: Default.
3: 512 bytes
4: 1 kB,
5: 2 kB,
6: 4 kB,
7: 8 kB,
8: 16 kB,
9: 32 kB,
10: 64 kB,
11: 128 kB,
12: 256 kB,
13: 512 kB,
14: 1 MB…
Enumeration
Enumerated Values:
1other
2default
3fiveHundredAndTwelvebytes
4oneKilobytes
5twoKilobytes
6fourKilobytes
7eightKilobytes
8sixteenKilobytes
9thirtyTwoKilobytes
10sixtyFourKilobytes
11oneTwentyEightKilobytes
12twoFiftySixKilobytes
13fiveOneTwoKilobytes
14oneMegabye
15twoMegabytes
16fourMegabytes
17eightMegabytes
18sixteenMegabytes
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.14
virtualDiskComponentStatusmandatory
The status of the virtual disk itself without the
propagation of any contained component status.
Possible values:
1: Other.
2: Unknown.
3: OK.
4: Non-critical .
5: Critical.
6: Non-recoverable.
ObjectStatusEnum
Type Values:
1other
2unknown
3ok
4nonCritical
5critical
6nonRecoverable
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.20
virtualDiskBadBlocksDetectedmandatory
Indicates whether the virtual disk has bad blocks.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.23
virtualDiskSecuredmandatory
Indicates whether the virtual disk is secured or not.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.24
virtualDiskIsCacheCademandatory
Indicates whether the virtual disk is being used as a secondary
cache by the controller.
BooleanType
Type Constraints:
range: 0..1
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.25
virtualDiskDiskCachePolicymandatory
The cache policy of the physical disks that are
part of this virtual disk
Possible values:
1: Enabled.
2: Disabled.
3: Default.
Enumeration
Enumerated Values:
1enabled
2disabled
3defullt
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.26
virtualDiskOperationalStatemandatory
The state of the virtual disk when there are progressive
operations ongoing.
Possible values:
1: There is no active operation running.
2: The virtual disk configuration has changed.
The physical disks included in the vi…
Enumeration
Enumerated Values:
1notApplicable
2reconstructing
3resynching
4initializing
5backgroundInit
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.30
virtualDiskProgressmandatory
The progress percentage of the operation that is being
performed on the virtual disk. This is applicable
only if there is a progressive operations ongoing
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.31
virtualDiskAvailableProtocolsmandatory
List of protocols support by physical disks part of this virtual
disk. For e.g. SAS for Serial Attached SCSI or SATA for
Serial Advanced Technology Attachment.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.32
virtualDiskMediaTypemandatory
List of media types of the physical disks part of this virtual
disk. For e.g. HDD for Hard Disk Drive or SSD for Solid State Device.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.33
virtualDiskRemainingRedundancymandatory
The number of physical disks which can be lost before the
virtual disk loses its redundancy.
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.34
virtualDiskFQDDmandatory
The virtual disk's Fully Qualified Device Descriptor (FQDD) as
represented in Storage Management.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.35
virtualDiskDisplayNamemandatory
The virtual disk's friendly FQDD as represented in Storage
Management.
RFC1213-MIBDisplayString .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.36
virtualDiskT10PIStatusmandatory
Indicates whether the virtual disk supports the T10 PI (Protection
Information). These protection fields are known as DIF
(Data Integrity Fields).
Possible values:
1: Not one of the following.
2: Enabled.
3: Disabled.
Enumeration
Enumerated Values:
1other
2enabled
3disabled
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.37
virtualDiskBlockSizeInBytesmandatory
The block size (in bytes) of the physical disk part of the virtual disk.
Possible values:
1: 512.
2: 4096
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.38
virtualDiskAdapter1AccessPolicymandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.39
virtualDiskAdapter2AccessPolicymandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.40
virtualDiskAdapter3AccessPolicymandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.41
virtualDiskAdapter4AccessPolicymandatory
Indicates the access policy of the virtual disk with the virtual
adapters.
Possible values:
1: No Access.
2: Full Access
Enumeration
Enumerated Values:
1noAccess
2fullAccess
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.42
virtualDiskCurrentActiveControllermandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the current active controller.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.43
virtualDiskFailoverControllermandatory
Indicates the Fully Qualified Device Descriptor (FQDD) of
the failover controller.
FQDDString
Type Constraints:
range: 0..512
 .1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.44