DELL-NETWORKING-IF-EXTENSION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
58

dellNetIfTable

table
.1.3.6.1.4.1.6027.3.11.1.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk dellNetIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-IF-EXTENSION-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-IF-EXTENSION-MIB::dellNetIfTable' 
Dell Networking OS Extension ifTable contains
generic interface parameters.
dellNetIfEntry row .1.3.6.1.4.1.6027.3.11.1.1.1.1
A row defintion of Dell Networking OS Interface
Extension parameters.
Indexes
Column Syntax OID
dellNetIfIpMtu
The IP (Internet Protocol), Maximum
Transmission Unit value.
Unsigned32r/w
Constraints:
range: 594-9252
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.1
dellNetIfDuplexMode
Duplex mode of the interface.
This will be read-write only for s60
Enumerationr/w
Enumerated Values:
1half
2full
3auto
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.2
dellNetIfQueueingStrategy
Queueing strategy used for packets.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.3
dellNetIfRxFlowCtrl
Flow control receive. This will be read-write only for s60
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.4
dellNetIfTxFlowCtrl
Flow Control transmit.This will be read-only only for s60
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.5
dellNetIfDescr
A textual string containing information about the interface.
This will be read-write only for s60
OctetStringr/w
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.6
dellNetIfAdminStatus
A admin status of any interface.
This will be read-write only for s60
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.7
dellNetIfRateInterval
The rate info interval for the interface.
This will be read-write only for s60
Unsigned32r/w
Constraints:
range: 30-299
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.8
dellNetIfSpeed
The interface's current bandwidth in bits per second.
This will be read-write only for s60
Enumerationr/w
Enumerated Values:
1auto
10tenMbps
100hundredMbps
1000thousandMbps
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.9
dellNetIfPortListBitPos
This is used for identifying the bit position in PortList Object for a given interface.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6027.3.11.1.1.1.1.10

dellNetIfStaticsTable

table
.1.3.6.1.4.1.6027.3.11.1.2.1 · 1 row entry · 27 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk dellNetIfStaticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-IF-EXTENSION-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-IF-EXTENSION-MIB::dellNetIfStaticsTable' 
The statistcs information of the interfaces for performance monitoring.
dellNetIfStaticsEntry row .1.3.6.1.4.1.6027.3.11.1.2.1.1
A row defintion of Dell Networking OS Extension
interface statistics.
Indexes
Column Syntax OID
dellNetIfInVlanPkts
The total number of valid VLAN Tagged
frames received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.1
dellNetIfIn64BytePkts
The total number of frames (including bad
frames) received that were 64 octets in length
(excluding framing bits but in-cluding FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.2
dellNetIfIn65To127BytePkts
The total number of frames (including bad
frames) received that were between 65 and 127
octets in length inclusive (ex-cluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.3
dellNetIfIn128To255BytePkts
The total number of frames (including bad
frames) received that were between 128 and 255
octets in length inclusive (excluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.4
dellNetIfIn256To511BytePkts
The total number of frames (including bad
frames) received that were between 256 and 511
octets in length inclusive (excluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.5
dellNetIfIn512To1023BytePkts
The total number of frames (including bad
frames) received that were between 512 and 1023
octets in length inclusive (excluding framing
bits but including FCS octets).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.6
dellNetIfInOver1023BytePkts
The total number of frames received that
were longer than 1023 (1025 Bytes in case of
VLAN Tag) octets (excluding framing bits, but
including FCS octets) and were otherwise
well formed. This counter is not incremented
…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.7
dellNetIfInThrottles
This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is re-ceived.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.8
dellNetIfInRunts
The total number of frames received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise
well formed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.9
dellNetIfInGiants
The total number of frames received that were
longer than 1518 (1522 Bytes in case of VLAN Tag)
octets (excluding framing bits, but including FCS
octets) and were otherwise well formed. This counter
is not incremented…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.10
dellNetIfInCRC
The total number of frames received that had
a length (ex-cluding framing bits, but including
FCS octets) of between 64 and 1518 octets,
inclusive, but had a bad CRC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.11
dellNetIfInOverruns
The total number of frames dropped because
of buffer issue.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.12
dellNetIfOutVlanPkts
The Number of Good VLAN Tagged Frames sent
successfully.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.13
dellNetIfOutUnderruns
The total number of frames dropped because
of buffer underrun.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.14
dellNetIfOutUnicasts
The Number of Good Unicast Frames sent successfully.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.15
dellNetIfOutCollisions
A count of the frames that due to excessive
or late collisions are not transmitted successfully.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.16
dellNetIfOutWredDrops
A count of the frames that are dropped using
WRED policy because of to excessive traffic.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.17
dellNetIfOut64BytePkts
The Number of Good Frames sent successfully
whose size was 64 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.18
dellNetIfOut65To127BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 65 to 127 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.19
dellNetIfOut128To255BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 128 to 255 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.20
dellNetIfOut256To511BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 256 to 511 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.21
dellNetIfOut512To1023BytePkts
The Number of Good Frames sent successfully
whose size was in the range of 512 to 1023 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.22
dellNetIfOutOver1023BytePkts
The Number of Good Frames sent successfully
whose size was greater than 1023 Bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.23
dellNetIfOutThrottles
This counter is incremented when a valid
frame with a length or type field value equal
to 0x8808 (Control Frame) is sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.24
dellNetIfLastDiscontinuityTime
The value of sysUpTime on the most recent occasion
at which this interface's counters suffered a
discontinuity via a reset. If no such discontinuities
have occurred since the last reinitialization of
the local manage…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.25
dellNetIfInCentRate
This is the ingress rate in percentage.
This is an integer value which can go from 0 to 100.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.26
dellNetIfOutCentRate
This is the egress rate in percentage.
This is an integer value which can go from 0 to 100.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6027.3.11.1.2.1.1.27

dellNetIfTransceiverDataTable

table
.1.3.6.1.4.1.6027.3.11.1.3.1 · 1 row entry · 21 columns
Open in standard view
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk dellNetIfTransceiverDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DELL-NETWORKING-IF-EXTENSION-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DELL-NETWORKING-IF-EXTENSION-MIB::dellNetIfTransceiverDataTable' 
The information to monitor transceiver data.
dellNetIfTransceiverDataEntry row .1.3.6.1.4.1.6027.3.11.1.3.1.1
A row defintion of Dell Networking OS Extension
transceiver data.
Indexes
Column Syntax OID
dellNetIfTransDeviceName
TransceiverData - DeviceName
OctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.1
dellNetIfTransPort
TransceiverData - Port
OctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.2
dellNetIfTransOpticsPresent
TransceiverData - OpticsPresent shows the presence of optic.
The possible values are 1 when the optic is inserted and 2 when the optic is not inserted.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.3
dellNetIfTransOpticsType
TransceiverData - Type
OctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.4
dellNetIfTransVendorName
TransceiverData - Name
OctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.5
dellNetIfTransPartNumber
TransceiverData - PartNumber
OctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.6
dellNetIfTransSerialNumber
TransceiverData - SerialNumber
OctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.7
dellNetIfTransTransmitPowerLane1
TransceiverData - Transmit Power in Lane 1 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.8
dellNetIfTransTransmitPowerLane2
TransceiverData - Transmit Power in Lane 2 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.9
dellNetIfTransTransmitPowerLane3
TransceiverData - Transmit Power in Lane 3 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.10
dellNetIfTransTransmitPowerLane4
TransceiverData - Transmit Power in Lane 4 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.11
dellNetIfTransReceivePowerLane1
TransceiverData - Receive Power in Lane 1 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.12
dellNetIfTransReceivePowerLane2
TransceiverData - Receive Power in Lane 2 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.13
dellNetIfTransReceivePowerLane3
TransceiverData - Receive Power in Lane 3 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.14
dellNetIfTransReceivePowerLane4
TransceiverData - Receive Power in Lane 4 in unit dBm.
For optics supporting power, valid float value will be
displayed or 'null string' will be displayed.
dBmOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.15
dellNetIfTransTemperature
TransceiverData - Temperature in unit degree Celsius.
For optics supporting temperature, valid float value will be
displayed or 'null string' will be displayed.
degree CelsiusOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.16
dellNetIfTransVoltage
TransceiverData - Voltage in unit volts.
For optics supporting voltage, valid float value will be
displayed or 'null string' will be displayed.
voltsOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.17
dellNetIfTransTransmitBiasCurrentLane1
TransceiverData - Transmit Bias Current in Lane 1 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed.
mAOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.18
dellNetIfTransTransmitBiasCurrentLane2
TransceiverData - Transmit Bias Current in Lane 2 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed.
mAOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.19
dellNetIfTransTransmitBiasCurrentLane3
TransceiverData - Transmit Bias Current in Lane 3 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed.
mAOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.20
dellNetIfTransTransmitBiasCurrentLane4
TransceiverData - Transmit Bias Current in Lane 4 in unit mA.
For optics supporting current, valid float value will be
displayed or 'null string' will be displayed.
mAOctetString
Constraints:
range: 0-241
 .1.3.6.1.4.1.6027.3.11.1.3.1.1.21