DCP-OPS-MIB
This MIB module defines management objects for the
Optical Protection Switch (OPS) module used in the
Smartoptics DCP platform.
It provides management of OPS operational state,
protection switching behavior, configuration, and
related performance and status information.
- Source file
DCP-OPS-MIB- Last revised
- Identity
dcpOps- Base OID
1.3.6.1.4.1.30826.2.2.8
Imported Objects
| DCP-MIB | dcpGeneric |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TEXTUAL-CONVENTION (no object page) |
| SO-TC-MIB | AdminStatus InterfaceStatus ItuPerceivedSeverity OpticalPower1Decimal |
Net-SNMP examples using the smartoptics MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DCP-OPS-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DCP-OPS-MIB::dcpOps'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCP-OPS-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCP-OPS-MIB::dcpOps'
Objects (26)
Showing 26 of 26 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.30826.2.2.8 |
||
.1.3.6.1.4.1.30826.2.2.8.1 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.30826.2.2.8.1.1.1.1 |
|
.1.3.6.1.4.1.30826.2.2.8.1.1.1.10 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.11 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.12 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.13 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.14 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.15 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.16 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.2 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.3 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.4 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.5 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.6 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.7 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.8 |
||
.1.3.6.1.4.1.30826.2.2.8.1.1.1.9 |
||
.1.3.6.1.4.1.30826.2.2.8.1.2 |
||
.1.3.6.1.4.1.30826.2.2.8.2 |
||
.1.3.6.1.4.1.30826.2.2.8.2.1 |
||
.1.3.6.1.4.1.30826.2.2.8.2.2 |
||
.1.3.6.1.4.1.30826.2.2.8.3 |
||
.1.3.6.1.4.1.30826.2.2.8.3.0 |
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SO-MIBsmartoptics
- DCP-MIBsmartoptics
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SO-TC-MIBsmartoptics
- DCP-OPS-MIBsmartopticsselected
Type Definitions (2)
| Enumeration |
lineA(1)lineB(2)Indicates which line interface is currently selected
on the receive side to carry client traffic within the protection switch. Transmission towards both Line A and Line B may occur simultaneously, depending on the implementation. This object reflects only the receive-side selection. lineA(1) - Line A is selected for reception. lineB(2) - Line B is selected for reception. |
|
| Enumeration |
auto(1)revertiveA(2)revertiveB(3)forcedA(4)forcedB(5)Indicates the configured protection switching mode
of the Optical Protection Switch. auto(1) - Non-revertive mode. Traffic is carried on the line that becomes active first when the system starts. If the active line fails, traffic switches to the other available line. When the failed line recovers, traffic remains on the currently active line until a forced switch is performed or the active line fails. This behavior applies symmetrically to both Line A and Line B. revertiveA(2) - Revertive mode with Line A as the preferred line. Traffic switches to Line B upon failure of Line A and automatically reverts to Line A after recovery. revertiveB(3) - Revertive mode with Line B as the preferred line. Traffic switches to Line A upon failure of Line B and automatically reverts to Line B after recovery. forcedA(4) - Forced mode. Line A is selected regardless of failure conditions. forcedB(5) - Forced mode. Line B is selected regardless of failure conditions. |
Conformance Groups (3)
|
dcpOpsSwitchIndex dcpOpsSwitchName dcpOpsSwitchAdminStatus dcpOpsSwitchClientRxPower dcpOpsSwitchClientTxPower dcpOpsSwitchLineARxPower dcpOpsSwitchLineATxPower dcpOpsSwitchLineBRxPower dcpOpsSwitchLineBTxPower dcpOpsSwitchClientLosThreshold dcpOpsSwitchLineALosThreshold dcpOpsSwitchLineBLosThreshold dcpOpsSwitchActiveLine dcpOpsSwitchMode dcpOpsSwitchAlarmSeverity dcpOpsSwitchDescription
The OPS interface table objects V1.
|
.1.3.6.1.4.1.30826.2.2.8.2.1.1
|
|
|
Objects used in OPS notifications.
|
.1.3.6.1.4.1.30826.2.2.8.2.1.2
|
|
|
The OPS notifications V1
|
.1.3.6.1.4.1.30826.2.2.8.2.1.3
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.30826.2.2.8.2.2.1Basic implementation requirements for the DCP-OPS-MIB V1.
Required groups
| mandatory | dcpOpsSwitchTableGroupV1 | |
| mandatory | dcpOpsSwitchNotificationObjectsGroupV1 | |
| mandatory | dcpOpsSwitchNotificationGroupV1 |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.30826.2.2.8.3.0.1 |
Sent when a line switch has occurred on an OPS switch.
|