DCP-LINKVIEW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
16

dcpLinkviewTable

table
.1.3.6.1.4.1.30826.2.2.3.1.1 · 1 row entry · 16 columns
Open in standard view
Uses the smartoptics variant from /opt/observium/mibs/smartoptics.
Command help
Walk dcpLinkviewTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DCP-LINKVIEW-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DCP-LINKVIEW-MIB::dcpLinkviewTable' 
Description.
dcpLinkviewEntry row .1.3.6.1.4.1.30826.2.2.3.1.1.1
Description.
Indexes
Column Syntax OID
dcpLinkviewIndex
Interface Index in the following format:
csiixy where

c: chassis.
s: slot number.
ii: Interface number.
x: 1 = line, 2 = client.
y: 0 = tx+rx port, 1 = tx port, 2 = rx port.

For DCP-M produ…
Unsigned32
Constraints:
range: 1-1000000
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.1
dcpLinkviewLocalHostname
The hostname of the local system.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.2
dcpLinkviewLocalName
The local interface name. If no interface this value is empty.
if-c/channelid-direction where c = chassis and direction = rx or tx.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.3
dcpLinkviewLocalStatus
The operational state of the local port.

idle - The port is not activated.

down - The port traffic is lost.

up - There is traffic on the port.
SO-TC-MIBInterfaceStatus
Type Values:
1idle
2down
3up
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.4
dcpLinkviewLocalPower
The optical power present at the line interface, all wavelengths combined in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal .1.3.6.1.4.1.30826.2.2.3.1.1.1.5
dcpLinkviewFiberLoss
The fiber loss in units of 0.1 dB.
DcpFiberLoss
Type Constraints:
range: 0..1000
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.6
dcpLinkviewFiberAttenuation
The fiber attenuation in units of 0.01 dB/km.
DcpFiberAttenuation
Type Constraints:
range: 0..10
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.7
dcpLinkviewFiberLength
The fiber length in units of 0.1 km.
DcpFiberLength
Type Constraints:
range: 0..500
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.8
dcpLinkviewFiberDispersion
The calculated dispersion based on the measured fiber length in units of 1 ps/nm.
Unsigned32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.9
dcpLinkviewFiberType
The fiber type configured, currently only G.652 is supported.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.10
dcpLinkviewFiberDispComp
The compensated dispersion value by the system in units of 1 ps/nm.
Integer32
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.11
dcpLinkviewFiberDispFinal
Residiual(remaning) dispersion in units of 1 ps/nm.
Integer32
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.12
dcpLinkviewFiberUtilization
Wavelength utilization of the system in units of %.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.13
dcpLinkviewRemotePower
The optical power of the remote interface in units of 0.1 dBm.
SO-TC-MIBOpticalPower1Decimal .1.3.6.1.4.1.30826.2.2.3.1.1.1.14
dcpLinkviewRemoteName
The remote interface name. If no interface this value is empty.
if-c/channelid-direction where c = chassis and direction = rx or tx.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.15
dcpLinkviewRemoteHostname
The hostname of the remote system.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.30826.2.2.3.1.1.1.16