DC-VPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
60

vplsConfigTable

table
.1.3.6.1.4.1.629.10.18.1.1 · 1 row entry · 26 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk vplsConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-VPLS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-VPLS-MIB::vplsConfigTable' 
VPLS Configuration Table.
          
This table specifies information for configuring and
monitoring Virtual Private LAN Services (VPLS).
          
It corresponds to vplsConfigTable and vplsBgpADConfigTable
in draft-ietf-l2vpn-vpls-mib-12.
          
A row in this table represents a Virtual Private LAN Service
(VPLS) in a packet network.  It is indexed by vplsIndex,
which uniquely identifies a single VPLS within a DC-L2VPN
Manager entity.
          
If the value of any read-create objects are changed when
vplsStatusOperStatus is 'up' then the VPLS may be
deactivated (vplsStatusOperStatus 'down') before the change
is made.  The VPLS will then attempt to re-activate.  Note
that the VPLS may or may not re-activate depending on the
validity of the new configuration.
vplsConfigEntry row .1.3.6.1.4.1.629.10.18.1.1.1
Represents a configured VPLS.
Indexes
Column Syntax OID
vplsIndex
Index identifying the VPLS instance.
DC-MASTER-TCNumericIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.629.10.18.1.1.1.2
vplsConfigRowStatus
The row status of this VPLS Configuration Table entry,
used to create and destroy table entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.10.18.1.1.1.3
vplsConfigAdminStatus
The administrative status of this VPLS instance, used to
activate and deactivate the VPLS instance.
DC-MASTER-TCAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.18.1.1.1.4
vplsConfigOperStatus
The current operational state of this VPLS instance.

If the operational status is 'up' then the VPLS is
programmed in the data plane.
DC-MASTER-TCNpgOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
8operStatusFailed
10operStatusFailedPerm
11operStatusFailing
 .1.3.6.1.4.1.629.10.18.1.1.1.5
vplsConfigName
A textual name of the VPLS instance. If there is no local
name, or this object is otherwise not applicable, then
this field MUST contain a zero-length octet string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.18.1.1.1.6
vplsConfigDescr
A textual string containing information about the VPLS
service. If there is no information for this VPLS
service, then this field MUST contain a zero-length octet
string.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.18.1.1.1.7
vplsConfigADType
The auto-discovery protocol used by this VPLS.

Changing this value will cause an interruption to data
flow for this VPLS.
DC-L2VPN-MIBL2vpnADTyper/w
Type Values:
1none
2bgp
 .1.3.6.1.4.1.629.10.18.1.1.1.8
vplsConfigSigType
The pseudowire signaling protocol used for auto-created
PWs on this VPLS.

If vplsConfigADType is set to 'none' this field is
ignored.

If vplsConfigADType is set to 'bgp' this field must be …
DC-L2VPN-MIBL2vpnSigTyper/w
Type Values:
1none
2ldp
3bgp
 .1.3.6.1.4.1.629.10.18.1.1.1.9
vplsConfigPwEncapType
The MPLS PW encapsulation type used by this VPLS.

Changing this value will cause an interruption to data
flow for this VPLS.
IANA-PWE3-MIBIANAPwTypeTCr/w
Type Values:
0other
1frameRelayDlciMartiniMode
2atmAal5SduVcc
3atmTransparent
4ethernetTagged
5ethernet
6hdlc
7ppp
8cem
9atmCellNto1Vcc
10atmCellNto1Vpc
11ipLayer2Transport
12atmCell1to1Vcc
13atmCell1to1Vpc
14atmAal5PduVcc
15frameRelayPortMode
16cep
17e1Satop
18t1Satop
19e3Satop
20t3Satop
21basicCesPsn
22basicTdmIp
23tdmCasCesPsn
24tdmCasTdmIp
25frDlci
32767wildcard
 .1.3.6.1.4.1.629.10.18.1.1.1.10
vplsConfigMacLearning
This field specifies if MAC Learning is enabled for this
VPLS. If this field is true then MAC Learning is enabled.
If false, then MAC Learning is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.1.1.11
vplsConfigDiscardUnknownDest
If the value of this field is 'true', then frames received
with an unknown destination MAC are discarded in this
VPLS. If 'false', then the packets are processed.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.1.1.12
vplsConfigMacAge
The aging time for entries in the VPLS Forwarder's FDB.
Set to zero to disable MAC aging.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.1.1.13
vplsConfigMtu
The layer 2 MTU of this VPLS.

When using auto-discovery and signaling, this specifies
the signaled layer 2 MTU. This can be used to limit the
MTU to a value lower than the MTU supported by the
associated…
bytesUnsigned32r/w
Constraints:
range: 64-9192
 .1.3.6.1.4.1.629.10.18.1.1.1.14
vplsConfigMacSize
The maximum number of learned and static entries allowed in
the VPLS Forwarder's FDB. A value of zero means no maximum.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.1.1.15
vplsConfigPwMacAddressLimit
The maximum number of learned and static entries allowed in
the FDB for each PW binding. A value of zero means no maximum.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.1.1.16
vplsConfigControlWord
Whether or not the pseudowires use a PW control word.

Changing this value will cause an interruption to data
flow for this VPLS.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.1.1.17
vplsConfigSeqDelivery
Whether or not the pseudowires must provide sequenced
delivery of traffic.

Changing this value will cause an interruption to data
flow for this VPLS.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.1.1.18
vplsConfigRouteDistinguisher
The route distinguisher for this VPLS. See [RFC4364] for
a complete definition of a route distinguisher.

This is only used if BGP auto-discovery is enabled
(vplsConfigADType = bgp).

Changi…
DC-L2VPN-MIBBgpRouteDistinguisherr/w
Type Constraints:
range: 8
 .1.3.6.1.4.1.629.10.18.1.1.1.19
vplsConfigVpnId
The VPN ID to advertise as a BGP extended community, or
zero if none.

If the VPLS uses BGP auto-discovery and LDP signaling
(vplsConfigADType = bgp and vplsConfigSigType = ldp) then
this must be set to a …
DC-L2VPN-MIBBgpExtendedCommunityr/w
Type Constraints:
range: 8
 .1.3.6.1.4.1.629.10.18.1.1.1.20
vplsConfigLocalVeID
The local VPLS VE ID, or zero if not specified.

This is only used if BGP auto-discovery is enabled
(vplsConfigADType = bgp). It can be used with BGP or LDP
signaling.

If auto-discovery is …
DC-L2VPN-MIBL2vpnVeIdOrZeror/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.1.1.21
vplsConfigLocalPreference
The preference that the local PE router is the designated
forwarder for this VPLS. High values are preferred to low
values.

This is only used if BGP auto-discovery is enabled
(vplsConfigADType = bgp). I…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.1.1.22
vplsConfigLabelBlockSize
The size of the label blocks for this VPLS.

This is only used when using BGP auto-discovery with BGP
signaling (vplsConfigADType = bgp and vplsConfigSigType =
bgp).

The only currently-permi…
Unsigned32r/w
Constraints:
range: 2-2
range: 4-4
range: 8-8
range: 16-16
 .1.3.6.1.4.1.629.10.18.1.1.1.23
vplsConfigADPwMacLearning
This field specifies if MAC Learning is enabled for BGP
auto-discovered PW bindings in this VPLS.

If this field and vplsConfigMacLearning are both true then
MAC Learning is enabled for the PW bindings. O…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.1.1.24
vplsConfigMultiCastFloodMode
This field specifies which (if any) multicast frames are
flooded in this VPLS.
VplsMCFloodModer/w
Type Values:
1all
2unknown
3none
 .1.3.6.1.4.1.629.10.18.1.1.1.25
vplsConfigIgnoreMtuMismatch
This field specifies whether mismatches of MTU size with
remote PE routers should be ignored for this VPLS.

If this field is false, PWs will not be established to
remote PE routers that signal a different…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.1.1.26
vplsConfigIgnoreEncapsMismatch
This field specifies whether mismatches of encapsulation
type with remote PE routers should be ignored for this
VPLS.

If this field is false, PWs will not be established to
remote PE routers that signal a…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.1.1.27

vplsStatusTable

table
.1.3.6.1.4.1.629.10.18.1.2 · 1 row entry · 12 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk vplsStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-VPLS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-VPLS-MIB::vplsStatusTable' 
This read-only table provides information for monitoring
Virtual Private LAN Services (VPLS).
          
It corresponds to vplsStatusTable in
draft-ietf-l2vpn-vpls-mib-12.
vplsStatusEntry row .1.3.6.1.4.1.629.10.18.1.2.1
A row in this table represents a Virtual Private LAN
Service (VPLS) in a packet network. It is indexed by
vplsConfigIndex, which uniquely identifies a single VPLS.

A row in this table is automatically crea…
Indexes
Column Syntax OID
vplsStatusOperStatus
The current operational state of this VPLS instance.

If the operational status is 'up' then the VPLS is
programmed in the data plane.
DC-MASTER-TCNpgOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
8operStatusFailed
10operStatusFailedPerm
11operStatusFailing
 .1.3.6.1.4.1.629.10.18.1.2.1.3
vplsStatusPwSetDownGauge
This field specifies the total number of operationally
'down' PW Sets currently present in this VPLS instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.4
vplsStatusPwSetGoingUpGauge
This field specifies the total number of operationally
'going-up' PW Sets currently present in this VPLS
instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.5
vplsStatusPwSetUpGauge
This field specifies the total number of operationally
'up' PW Sets currently present in this VPLS instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.6
vplsStatusPwSetFailGauge
This field specifies the number of operationally 'failed'
PW Sets currently present in this VPLS instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.7
vplsStatusPwSetFailPermGauge
This field specifies the number of operationally
'failed-perm' PW Sets currently present in this VPLS
instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.8
vplsStatusAcDownGauge
This field specifies the total number of operationally
'down' attachment circuits currently present in this VPLS
instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.9
vplsStatusAcGoingUpGauge
This field specifies the total number of operationally
'going-up' attachment circuits currently present in this
VPLS instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.10
vplsStatusAcUpGauge
This field specifies the total number of operationally
'up' attachment circuits currently present in this VPLS
instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.11
vplsStatusAcFailGauge
This field specifies the total number of operationally
'failed' attachment circuits currently present in this
VPLS instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.12
vplsStatusAcFailPermGauge
This field specifies the total number of operationally
'failed-perm' attachment circuits currently present in
this VPLS instance.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.2.1.13
vplsStatusDesignatedForwarder
Whether or not the PE router is currently the elected
Designated Forwarder for this VPLS instance.

This field is only used if BGP auto-discovery is enabled
(vplsConfigADType = bgp). Otherwise, it is set …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.2.1.14

vplsAcBindCfgTable

table
.1.3.6.1.4.1.629.10.18.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk vplsAcBindCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-VPLS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-VPLS-MIB::vplsAcBindCfgTable' 
This table provides an association between an Interface (as an
attachment circuit) and a VPLS service.
          
Multiple ACs can be associated to a single VPLS service.
          
Note that changes to this table may cause the corresponding
AC to go operationally down as it may involve re-programming
the AC in the data plane.
vplsAcBindCfgEntry row .1.3.6.1.4.1.629.10.18.1.3.1
Each row represents an association between an attachment
circuit (AC) and a VPLS instance. ACs are identified by
their Interface index as defined in the ifTable.
Indexes
Column Syntax OID
vplsAcBindCfgRowStatus
The row status for this VPLS AC Binding Configuration
Table entry, used to create and destroy table entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.10.18.1.3.1.3
vplsAcBindCfgAdminStatus
The administrative status of this VPLS AC Binding, used to
activating and deactivate the VPLS AC Binding.
DC-MASTER-TCAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.18.1.3.1.4
vplsAcBindCfgOperStatus
The curent operational status of the binding.

If the operational status is 'up' then the AC is
programmed in the data plane and bound to the VPLS.
DC-MASTER-TCNpgOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
8operStatusFailed
10operStatusFailedPerm
11operStatusFailing
 .1.3.6.1.4.1.629.10.18.1.3.1.5
vplsAcBindCfgVplsIndex
Index identifying the VPLS instance.

This field must be set to a non-zero value for which there
is a matching operationally 'up' VPLS before the VPLS AC
Binding can go into operational status 'up'.
…
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.629.10.18.1.3.1.6
vplsAcBindCfgMacAddrLimit
The maximum number of learned and static entries allowed
in the FDB for this AC binding. A value of zero means no
maximum.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.10.18.1.3.1.7
vplsAcBindCfgMacLearning
This field specifies if MAC Learning is enabled for this
AC binding.

If this field and vplsConfigMacLearning are both true then
MAC Learning is enabled for the AC binding. Otherwise MAC
Learning is disab…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.3.1.8

vplsPwSetBindCfgTable

table
.1.3.6.1.4.1.629.10.18.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk vplsPwSetBindCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-VPLS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-VPLS-MIB::vplsPwSetBindCfgTable' 
This table allows an operator to manually configure an association
between a PW Set and a VPLS.
          
A PW Set is a redundant group of PWs that contains at most one
active PW and an arbitrary number of standby PWs.  It is identified
by a PW Set index.  When the user manually configures a PW in the
pwTable, they may place the PW into a PW Set by configuring the PW
with the appropriate PW Set Index.  The user then places the whole
PW Set into the VPLS by creating a row in this table.  The system
will automatically select which PW in the set actually carries the
VPLS customer frames, and will automatically manage a transition
between PWs in the PW Set in the event that the active PW changes.
          
If PW redundancy is not required, then the user should configure
PWs in the pwTable as normal, and set the PW Set index equal to the
pwIndex.  This will create a PW Set containing exactly one PW,
which can then be placed into the VPLS using this table.
          
Note that PW Sets containing auto-discovered pseudowires do not
appear in this table.
          
This table is indexed on vplsPwSetBindIndex to ensure a PW Set is
only ever configured in a single VPLS.  The read-only pwBindTable
displays all PWs bound to each VPLS.
          
Note that a change to any read-create field in this table will
cause any active PWs in the corresponding PW Set to go
operationally down and be re-programmed.
vplsPwSetBindCfgEntry row .1.3.6.1.4.1.629.10.18.1.4.1
Each row represents a manual association between a PW Set and a
VPLS instance.
Indexes
Column Syntax OID
vplsPwSetBindCfgIndex
The index of the PW Set that is being bound to a VPLS.
DC-MASTER-TCNumericIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.629.10.18.1.4.1.2
vplsPwSetBindCfgRowStatus
The row status for this VPLS PW Set Binding Configuration
Table entry, used to create and destroy table entries.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.10.18.1.4.1.3
vplsPwSetBindCfgAdminStatus
The administrative status of this VPLS PW Set Binding,
used to activate and deactivate the binding.
DC-MASTER-TCAdminStatusr/w
Type Values:
1adminStatusUp
2adminStatusDown
 .1.3.6.1.4.1.629.10.18.1.4.1.4
vplsPwSetBindCfgOperStatus
The curent operational status of the binding.

If the operational status is 'up' then a PW is programmed
in the data plane and bound to the VPLS Forwarder.
DC-MASTER-TCNpgOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
8operStatusFailed
10operStatusFailedPerm
11operStatusFailing
 .1.3.6.1.4.1.629.10.18.1.4.1.5
vplsPwSetBindCfgVplsIndex
Index identifying the VPLS instance.

This field must be set to a non-zero value before the VPLS
PW Set Binding can go into operation status 'up'.

Changing this value will cause an interrupt…
DC-MASTER-TCNumericIndexOrZeror/w
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.629.10.18.1.4.1.6
vplsPwSetBindCfgSpltHznGrp
The split horizon group ID that all the PWs in this PW Set belong
to. A value of zero indicates that the PWs in this PW Set do not
belong to any split horizon group.

When a broadcast or unknown-unicast p…
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.10.18.1.4.1.7
vplsPwSetBindCfgMacLearning
This field specifies if MAC Learning is enabled for this
PW Set binding.

If this field and vplsConfigMacLearning are both true then
MAC Learning is enabled for the PW Set binding. Otherwise
MAC Learning …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.629.10.18.1.4.1.8

vplsAcBindTable

table
.1.3.6.1.4.1.629.10.18.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk vplsAcBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-VPLS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-VPLS-MIB::vplsAcBindTable' 
This table displays the association between a VPLS service and
the corresponding attachment circuits (ACs).  A service can
have more than one AC association.
vplsAcBindEntry row .1.3.6.1.4.1.629.10.18.1.5.1
Each row represents an association between a VPLS instance and
one or more attachment circuits (ACs). ACs are identified by
their interface index as defined in the ifTable.

Each index is unique in describi…
Indexes
Column Syntax OID
vplsAcBindOperStatus
The curent operational status of the binding. If the
operational status is 'up' then the AC is programmed in the
data plane and bound to the VPLS.
DC-MASTER-TCNpgOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
8operStatusFailed
10operStatusFailedPerm
11operStatusFailing
 .1.3.6.1.4.1.629.10.18.1.5.1.4
vplsAcBindAcStatus
The current status of the AC.
VplsAcStatus
Type Values:
0unknown
1active
2standby
 .1.3.6.1.4.1.629.10.18.1.5.1.5

vplsPwSetBindTable

table
.1.3.6.1.4.1.629.10.18.1.6 · 1 row entry · 7 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk vplsPwSetBindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-VPLS-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-VPLS-MIB::vplsPwSetBindTable' 
This table displays the association between a VPLS, an individual
VPLS Forwarder and the PW Sets that are bound to the VPLS.
          
This table is read-only.
vplsPwSetBindEntry row .1.3.6.1.4.1.629.10.18.1.6.1
Each row represents an association between a VPLS Forwarder and a
PW Set.
Indexes
Column Syntax OID
vplsPwSetBindIndex
The index of the PW Set that is bound to this VPLS.

If vplsPwSetBindConfigType is 'manual' then this field corresponds
to vplsPwSetBindCfgIndex.

If vplsPwSetBindConfigType is 'autodiscovery…
DC-MASTER-TCNumericIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.629.10.18.1.6.1.3
vplsPwSetBindOperStatus
The curent operational status of the binding. If the
operational status is 'up' then the PW Set is programmed in the
data plane and bound to the VPLS Forwarder.
DC-MASTER-TCNpgOperStatus
Type Values:
1operStatusUp
2operStatusDown
3operStatusGoingUp
4operStatusGoingDown
5operStatusActFailed
8operStatusFailed
10operStatusFailedPerm
11operStatusFailing
 .1.3.6.1.4.1.629.10.18.1.6.1.4
vplsPwSetBindConfigType
If the PW Set was bound to the VPLS manually via a row in
vplsPwSetBindCfgTable then this field is set to pwMibIndex.

If the PW Set contains a PW that was created automatically as the
result of an auto-di…
DC-L2VPN-MIBL2vpnPwBindType
Type Values:
1pwMibIndex
2lclRmtVeId
 .1.3.6.1.4.1.629.10.18.1.6.1.5
vplsPwSetBindIfIndex
The interface index that has been assigned for this PW
Set if known, or zero otherwise.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.629.10.18.1.6.1.6
vplsPwSetBindRemoteRD
The remote route distinguisher, or null if not known.

This is the route distinguisher of the best BGP route
advertising the remote VPLS VE.

This is only relevant if vplsPwSetBindConfigType …
DC-L2VPN-MIBBgpRouteDistinguisher
Type Constraints:
range: 8
 .1.3.6.1.4.1.629.10.18.1.6.1.7
vplsPwSetBindRemoteAddrType
The address family of the remote address.

This is only relevant if vplsPwSetBindConfigType =
lclRmtVeId.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.629.10.18.1.6.1.8
vplsPwSetBindRemoteAddr
The remote address, or null if not known.

This is the address of the router advertising the best BGP
route to the remote VPLS VE.

This is only relevant if vplsPwSetBindConfigType =
lclRmtVe…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.629.10.18.1.6.1.9