DASAN-MCAST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
55
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1 · 1 row entry · 18 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsInterfaceStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsInterfaceStatsTable'
Table contains statistics information for IGMP snooping. An 
entry appears in this table for each IGMP Snooping capable 
interface in the device.
dsInterfaceStatsEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1
An entry contains statistics information for a specific IGMP
Snooping capable interface. It provides information about
IGMP messages and reports that have been transmitted and
received at the interface.
Indexes
Column Syntax OID
Total IGMP General Queries that have been transmitted through
an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.1
Total IGMP Group-Specific Queries that have been transmitted
through an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.2
Total IGMP Membership Reports that have been transmitted
through an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.3
Total IGMP Leave messages that have been transmitted through
an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.4
Total IGMP General Queries that have been received at an
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.5
Total IGMP Group-Specific Queries that have been received at
an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.6
Total IGMP Membership Reports that have been received at an
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.7
Total IGMP Leave messages that have been received at an
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.8
Total valid IGMP packets have been received at an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.9
Total packets those are not valid IGMP messages received
at an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.10
Total non IGMP messages messages that have been received
at an interface, comprising cgmp join, pim hello, dvmrp
and mospf messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.11
Total Topology Change Notifications that have been received
at an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.12
Number of Source-List-Change records with the record type
ALLOW_NEW_SOURCES that have been sent from hosts connected
to an interface. This record type indicates that the Source
Address fields in this Group Record cont…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.13
Number of Source-List-Change records with the record type
BLOCK_OLD_SOURCE that have been sent from hosts connected to
an interface. This record type indicates that the Source
Address fields in this Group Record contain…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.14
Number of Current-State records with the state MODE_IS_INCLUDE
that have been sent from hosts in response to a Query received
at an interface. This state indicates that the interface has a
filter mode of INCLUDE for t…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.15
Number of Current-State records with the state MODE_IS_EXCLUDE
that have been sent from hosts in response to a Query received
at an interfaces. This state indicates that the interface has a
filter mode of EXCLUDE for th…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.16
Number of Filter-Mode-Change records with the record type
CHANGE_TO_INCLUDE_MODE that have been sent through an
interface. This type of record indicates that the filter mode
has been changed to INCLUDE mode for the sp…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.17
Number of Filter-Mode-Change records with the record type
CHANGE_TO_EXCLUDE_MODE that have been sent through an
interface. This type of record indicates that the filter mode
has been changed to EXCLUDE mode for the spe…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6296.9.1.1.2.24.1.2.1.1.18
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1 · 1 row entry · 6 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsVlanConfigTable'
Table contains VLAN based configuration information
for IGMP Snooping.
dsVlanConfigEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1
An entry is created for each active VLAN in the device
and deleted when the VLAN becomes inactive.
Indexes
Column Syntax OID
This object indicates the VLAN in which IGMP Snooping
is configured.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.1
When this object is set to 'true' IGMP Snooping
is enabled on this VLAN else disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.2
This object specifies whether Fast-Leave mechanism
(also known as Immediate-Leave) is to be performed by IGMP
Snooping or not. When enabled, IGMP Snooping will remove
the interface from the group mentioned in the IGMP…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.3
Description.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.4
Description.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.5
.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.1.1.6
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2 · 1 row entry · 6 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsIgmpQuerierTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsIgmpQuerierTable'
Table containing information regarding the IGMP Querier in
the VLAN.  The device can be configured to be the IGMP Querier
for the VLAN. An IGMP Querier for the VLAN is selected by 
using a Querier Election process.
dsIgmpQuerierEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1
An entry is created for each active VLAN in the device and
contains IGMP Querier configuration information related to
IGMP Snooping for that VLAN. An entry is deleted when the
VLAN becomes inactive.
Column Syntax OID
The object indicates the VLAN that the Querier will send
IGMP queries on.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.1
The object indicates whether the device will participate in
the IGMP Querier election in a VLAN. If the object is set
to 'true', the device will participate to an election
process to be a Querier. If the object is set t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.2
The object indicates the current state of the device as an
IGMP Querier in a VLAN.

disabled(1) : Querier function is disabled for this device
in this VLAN.
electing(2) : The device is in…
Enumeration
Enumerated Values:
1disabled
2electing
3querier
4nonQuerier
5inactive
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.3
The object indicates IGMP version of the Querier for the VLAN.
IGMP version of the Querier is determined by the type of IGMP
General Query received by the device.
DsIgmpVersion
Type Values:
1version1
2version2
3version3
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.4
The object indicates IP address of the IGMP Querier
for the VLAN.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.5
The object indicates the interface on which IGMP Querier is
detected for the VLAN. The value of this object is zero
if the device itself is acting as IGMP Querier for the VLAN.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6296.9.1.1.2.24.1.3.2.1.6
.1.3.6.1.4.1.6296.9.1.1.2.24.1.4.1 · 1 row entry · 1 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsIfConfigTable'
Table containing configuration information for IGMP 
Snooping on a layer two interface.
dsIfConfigEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.4.1.1
An entry is created for each interface layer two
interface.
Indexes
Column Syntax OID
When this object is set to 'true' multicast traffic will be
flooded on the port for dsTopoChangeFloodQueryCount of Igmp
General Queries upon receiving a Topology Change
Notification (TCN) for the VLAN to which the port…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.6296.9.1.1.2.24.1.4.1.1.1
.1.3.6.1.4.1.6296.9.1.1.2.24.1.4.2 · 1 row entry · 1 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsIfPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsIfPortConfigTable'
.
dsIfPortConfigEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.4.2.1
.
Indexes
Column Syntax OID
.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6296.9.1.1.2.24.1.4.2.1.1
.1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1 · 1 row entry · 4 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsMcastRouterCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsMcastRouterCfgTable'
Table containing multicast router configuration information
for IGMP Snooping.
dsMcastRouterCfgEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1
An entry is created for each interface in the VLAN that is
either learned or configured as multicast router port.
Column Syntax OID
Description.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.1
This object indicates the VLAN to which the multicast router
port belongs.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.2
This object indicates if the multicast router port is
a configured (static) or learned (dynamic) port.
Enumeration
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.3
This object is a conceptual row entry that allows to add
or delete entries to or from the dsMcastRouterCfgTable.
When creating an entry in this table 'createAndGo' method
is used and the value of this object is set to '…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6296.9.1.1.2.24.1.5.1.1.4
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1 · 1 row entry · 5 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsMcastGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsMcastGroupTable'
Table containing multicast group address information for
IGMP Snooping.
dsMcastGroupEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1
An entry is created by IGMP Snooping for each group learned
in the VLAN.
Column Syntax OID
This object indicates the VLAN in which the group is learned.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.1
This object indicates IP multicast address learned by
IGMP Snooping.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.2
This object indicates the set of ports on which IGMP
Membership Reports are received for the group indicating
interest to receive traffic sent to the group.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.3
This object indicates a the IGMP filter mode for the group.

include(1) : reception of multicast packets sent to the group
specified by cisMcastGroupAddress is requested
only from…
Enumeration
Enumerated Values:
1include
2exclude
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.4
This object indicates the IGMP version for the group.
This is determined by the type of IGMP Membership Report
received by the device.
DsIgmpVersion
Type Values:
1version1
2version2
3version3
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.1.1.5
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2 · 1 row entry · 8 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsMcastIgmpGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsMcastIgmpGroupTable'
Table containing multicast group address information for
IGMP Snooping.
dsMcastIgmpGroupEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1
An entry is created by IGMP Snooping for each group learned
in the VLAN.
Column Syntax OID
.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.1
.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.2
.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.3
.
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.4
.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.5
.
DsIgmpVersion
Type Values:
1version1
2version2
3version3
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.6
.
DsIgmpFilterMode
Type Values:
1includeAllow
2includeBlock
3excludeAllow
4excludeBlock
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.7
.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6296.9.1.1.2.24.1.6.2.1.8
.1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1 · 1 row entry · 6 columns
Uses the dasan variant from /opt/observium/mibs/dasan.
Command help
Walk dsIgmpStaticGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DASAN-MCAST-MIB' -M '/opt/observium/mibs/dasan:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DASAN-MCAST-MIB::dsIgmpStaticGroupTable'
.
dsIgmpStaticGroupEntry row .1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1
.
Column Syntax OID
.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.1
.
Integer32r/w
Constraints:
range: 1-4096
.1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.2
.
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.3
.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.4
.
Enumerationr/w
Enumerated Values:
0unknown
1joined
2joinPending
3leavePending
4offline
.1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.5
.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6296.9.1.1.2.24.2.2.1.1.10