CYCLADES-ACS-INFO-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
16
cyInfoSerialTable
table
.1.3.6.1.4.1.2925.4.3.1
·
1 row entry
·
16 columns
Uses the vertiv variant from
Command help
/opt/observium/mibs/vertiv.
Walk cyInfoSerialTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CYCLADES-ACS-INFO-MIB' -M '/opt/observium/mibs/vertiv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CYCLADES-ACS-INFO-MIB::cyInfoSerialTable'
This is the information of the specific serial port
One particular serial port
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
number to identifier the serial port.
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.2925.4.3.1.1.1 |
||||
|
The device name for the serial port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2925.4.3.1.1.2 |
||||
|
Alias name given to the server connected to the serial port.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.2925.4.3.1.1.3 |
||||
|
The speed for serial port.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2925.4.3.1.1.4 |
||||
|
The number of transmited bytes by the serial port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2925.4.3.1.1.5 |
||||
|
The number of received bytes by the serial port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2925.4.3.1.1.6 |
||||
|
The number of frame error.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2925.4.3.1.1.7 |
||||
|
The number of parity error.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2925.4.3.1.1.8 |
||||
|
The number of breaks error.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2925.4.3.1.1.9 |
||||
|
The number of overrun error.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2925.4.3.1.1.10 |
||||
|
The state of DTR signal.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2925.4.3.1.1.11 |
||||
|
The state of DCD signal.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2925.4.3.1.1.12 |
||||
|
The state of DSR signal.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2925.4.3.1.1.13 |
||||
|
The state of RTS signal.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2925.4.3.1.1.14 |
||||
|
The state of CTS signal.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2925.4.3.1.1.15 |
||||
|
The state of RI signal.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.2925.4.3.1.1.16 |
