CTRON-SSR-HARDWARE-MIB
This module defines a schema to access SSR hardware configuration.
- Source file
CTRON-SSR-HARDWARE-MIB- Last revised
- Identity
hardwareMIB- Base OID
1.3.6.1.4.1.52.2501.1.200
Imported Objects
| CTRON-SSR-SMI-MIB | ssrMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) |
Net-SNMP examples using the cabletron MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CTRON-SSR-HARDWARE-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CTRON-SSR-HARDWARE-MIB::hardwareMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CTRON-SSR-HARDWARE-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CTRON-SSR-HARDWARE-MIB::hardwareMIB'
Objects (37)
Showing 37 of 37 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.52.2501.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.52.2501.1.1.1 |
|
|
|
.1.3.6.1.4.1.52.2501.1.1.10 |
|
|
|
.1.3.6.1.4.1.52.2501.1.1.11 |
|
|
|
.1.3.6.1.4.1.52.2501.1.1.12 |
|
|
|
.1.3.6.1.4.1.52.2501.1.1.13 |
|
|
|
.1.3.6.1.4.1.52.2501.1.1.14 |
|
|
|
.1.3.6.1.4.1.52.2501.1.1.15 |
|
.1.3.6.1.4.1.52.2501.1.1.19 |
||
.1.3.6.1.4.1.52.2501.1.1.2 |
||
.1.3.6.1.4.1.52.2501.1.1.2.1 |
||
|
Integer32
|
.1.3.6.1.4.1.52.2501.1.1.2.1.1 |
|
.1.3.6.1.4.1.52.2501.1.1.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.52.2501.1.1.2.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.52.2501.1.1.2.1.4 |
|
|
OctetString
|
.1.3.6.1.4.1.52.2501.1.1.2.1.5 |
|
.1.3.6.1.4.1.52.2501.1.1.2.1.6 |
||
.1.3.6.1.4.1.52.2501.1.1.2.1.8 |
||
.1.3.6.1.4.1.52.2501.1.1.2.1.9 |
||
.1.3.6.1.4.1.52.2501.1.1.20 |
||
.1.3.6.1.4.1.52.2501.1.1.21 |
||
.1.3.6.1.4.1.52.2501.1.1.22 |
||
.1.3.6.1.4.1.52.2501.1.1.3 |
||
.1.3.6.1.4.1.52.2501.1.1.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.52.2501.1.1.3.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.52.2501.1.1.3.1.2 |
|
.1.3.6.1.4.1.52.2501.1.1.3.1.3 |
||
.1.3.6.1.4.1.52.2501.1.1.3.1.4 |
||
.1.3.6.1.4.1.52.2501.1.1.3.1.5 |
||
.1.3.6.1.4.1.52.2501.1.1.4 |
||
|
Enumeration
|
.1.3.6.1.4.1.52.2501.1.1.5 |
|
|
Enumeration
|
.1.3.6.1.4.1.52.2501.1.1.6 |
|
|
OctetString
|
.1.3.6.1.4.1.52.2501.1.1.7 |
|
.1.3.6.1.4.1.52.2501.1.200 |
||
.1.3.6.1.4.1.52.2501.1.200.2 |
||
.1.3.6.1.4.1.52.2501.1.200.2.1 |
||
.1.3.6.1.4.1.52.2501.1.200.2.2 |
Dependencies (6) 4 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- RFC1155-SMIrfc
- CTRON-OIDScabletron
- SNMPv2-SMIrfc
- CTRON-SSR-SMI-MIBcabletron
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- CTRON-SSR-HARDWARE-MIBcabletronselected
Type Definitions (11)
| Integer32 |
range: 0..255 |
|
| Enumeration |
unknown(1)inactive(2)standby(3)notInstalled(4)active(5) |
|
| Integer32 |
range: 0..15 |
|
| Integer32 |
range: 0..65535 |
|
| Enumeration |
online(1)offline(2) |
|
| Enumeration |
controlModule(1)ether100TX(2)ether100FX(3)gigabitSX(4)gigabitLX(5)serial4port(6)hssi(7)unknown(8)gigabitLLX(9)none(10)controlModule2(11)gigabitLLX2P(12)serial2port(13)cmts1x4port(15)fddi2port(16)controlModule3(17)serial4portCE(20)ether100TX16port(21)gigabitTX(22)atm155(24)sonet4PortOc3(25)sonet2PortOc12(26)gigabitFX4P(27)gigabitFX4PGBIC(28)gigabitFX2PGBIC(29)gigabit6K2PBP(30)rbGigabit8PGBIC(503)rbGigabit4PGBIC(504)rbEther100TX24P(505)rbEther100TC32P(506)rbControlModule(507) |
|
| Enumeration |
empty(0)db9m(1)db9f(2)db15m(3)db15f(4)db25m(5)db25f(6)rj11(7)rj45(8)aui(9)ftypef(10)fiberScMM(11)v35(12)eia530(13)rs44x(14)x21(15)hssi(16)unknown(17)fiberScSM(18)fiberMTRjMM(19)fiberMTRjSM(20)bncf(21)bncm(22)rj21(23)fiberScSMLH(24) |
|
| Enumeration |
etherFast(1)gigEther(2)hssi(3)serial(4)unknown(5)sonet(6)ds1(7)ds3(8)cmt(9)e1(10)e3(11)fddi(12) |
|
| Integer32 |
range: 0..63 |
|
| Integer32 |
range: -1..2147483647 |
|
| OctetString |
range: 0..7 |
Conformance Groups (4)
Compliance Statements (4)
OID
.1.3.6.1.4.1.52.2501.1.200.2.2.1.1The compliance statement for the SSR-HARDWARE-MIB.
Required groups
| mandatory | hwConfGroupV10 |
OID
.1.3.6.1.4.1.52.2501.1.200.2.2.2.2The compliance statement for the SSR-HARDWARE-MIB.
Required groups
| mandatory | hwConfGroupV11 |
OID
.1.3.6.1.4.1.52.2501.1.200.2.2.2.3The compliance statement for the SSR-HARDWARE-MIB.
Required groups
| mandatory | hwConfGroupV11 |
OID
.1.3.6.1.4.1.52.2501.1.200.2.2.2.4The compliance statement for the SSR-HARDWARE-MIB.
Required groups
| mandatory | hwConfGroupV30 |