CTRON-PRIORITY-EXTENSIONS-MIB Table View

This table provides information pertaining to the number
of physical transmit queues per interface.

ctPriorityExtTXQueueEntry row .1.3.6.1.4.1.52.4.1.2.14.1.1.1

Specifies the number of transmit queues for this interface.

Indexes

ctPriorityExtSlotNum ctPriorityExtInterfaceNum

Column	Syntax	OID
ctPriorityExtSlotNummandatory The slot num of the device that the interface is located on.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.1.1.1.1
ctPriorityExtInterfaceNummandatory The interface number for which the information is requested. This is equal to the MIB-II ifIndex.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.1.1.1.2
ctPriorityExtNumTXQueuesmandatory The number of physical transmit queues for the requested interface.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.52.4.1.2.14.1.1.1.3

This table provides the ability to specify priority based
on the MAC addresses encoded in a packet.  There are several
possible permutations achieveable via this table. Priorities
in this table may be based on the following criteria:
               
   Destination address and specific packet type and VLAN ID
   Destination address and specific packet type
   Destination address
   Source address and specific packet type and VLAN ID
   Source address and specific packet type
   Source address
   Destination or source address and specific packet type and VLAN ID 
   Destination or source address and specific packet type
   Destination or source address
Depending on the values set in the table which of these criteria
will be used for any given packet.
          
If any given relationship can not be created the set will fail with a 
BAD-VALUE error.

ctPriorityExtMACEntry row .1.3.6.1.4.1.52.4.1.2.14.2.5.1

Describes a particular MAC address priority entry.

Indexes

ctPriorityExtMACAddr ctPriorityExtAddrType ctPriorityExtMACPktType ctPriorityExtMACVlanId

Column	Syntax	OID
ctPriorityExtMACAddrmandatory The MAC address which will have a priority associated with it as specified by ctPriorityExtMACPriority.	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.52.4.1.2.14.2.5.1.1
ctPriorityExtAddrTypemandatory The type of MAC address which will have priority associated with it as specified by ctPriorityExtMACPriority.	Enumeration Enumerated Values: 1 destAddr 2 srcAddr 3 destOrSource	.1.3.6.1.4.1.52.4.1.2.14.2.5.1.2
ctPriorityExtMACPktTypemandatory The packet type associated with a particular MAC address, specified by ctPriorityExtMACAddr, which will have priority associated with it as specified by ctPriorityExtMACPriority. A value of 1 indicates that this entry p…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.2.5.1.3
ctPriorityExtMACVlanIdmandatory A set of 65335 (0xFFFF) causes the priority value specified in ctPriorityExtMACPriority to apply to all packets matching the criteria specified by ctPriorityExtMACAddr, ctPriorityExtAddrType, and ctPriorityExtMACPktTy…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.2.5.1.4
ctPriorityExtMACPrioritymandatory A set of delete(100) will delete this row from the ctPriorityExtMACTable. A set of priority(1-8) will either create a row in the ctPriorityExtMACTable with the specified priority or modify an existing entry with the n…	Enumerationr/w Enumerated Values: 1 priority0 2 priority1 3 priority2 4 priority3 5 priority4 6 priority5 7 priority6 8 priority7 100 delete	.1.3.6.1.4.1.52.4.1.2.14.2.5.1.5

This table provides the ability to specify priority based
on the packet type encoded in a packet. Priorities  
in this table may be based on the following criteria:
               
   Packet type and VLAN ID
   Packet type
          
If any given relationship can not be created the set will fail with a 
BAD-VALUE error.

ctPriorityExtPktTypeEntry row .1.3.6.1.4.1.52.4.1.2.14.3.4.1

Describes a particular packet type priority entry.

Indexes

ctPriorityExtPktType ctPriorityExtPktTypeVlanId

Column	Syntax	OID
ctPriorityExtPktTypemandatory The packet type which will have priority associated with it as specified by ctPriorityExtPktTypePriority. A value of 1 indicates that this entry pertains to all packet types. A single value in the range of 0x0600..0x…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.3.4.1.1
ctPriorityExtPktTypeVlanIdmandatory A set of 65535 (0xFFFF) causes the priority value specified in ctPriorityExtPktTypePriority to apply to all packets of the type specified by ctPriorityExtPktType. Any value between 1 and 4095 is a valid VLAN ID (IEEE …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.3.4.1.2
ctPriorityExtPktTypePrioritymandatory A set of delete(100) will delete this row from the ctPriorityExtPriorityTypeTable. A set of priority(1-8) will either create a row in the ctPriorityExtPriorityTypeTable with the specified priority or modify an existin…	Enumerationr/w Enumerated Values: 1 priority0 2 priority1 3 priority2 4 priority3 5 priority4 6 priority5 7 priority6 8 priority7 100 delete	.1.3.6.1.4.1.52.4.1.2.14.3.4.1.3

This table provides information pertaining to the priority associated 
with a receive port.

ctPriorityExtPortEntry row .1.3.6.1.4.1.52.4.1.2.14.4.2.1

Specifies the priority associated with a specific physical
interface.

Indexes

ctPriorityExtPortSlotNum ctPriorityExtPortInterfaceNum

Column	Syntax	OID
ctPriorityExtPortSlotNummandatory The slot num of the device that the interface is located on.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.4.2.1.1
ctPriorityExtPortInterfaceNummandatory The interface number for which the information is requested.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.14.4.2.1.2
ctPriorityExtPortPrioritymandatory A set of priority(1-8) will modify an existing entry with the newly specified priority. Entries cannot be deleted from this table.	Enumerationr/w Enumerated Values: 1 priority0 2 priority1 3 priority2 4 priority3 5 priority4 6 priority5 7 priority6 8 priority7	.1.3.6.1.4.1.52.4.1.2.14.4.2.1.3
ctPriorityExtFwdInboundPrioritymandatory This controls whether a packet that is received with a priority tag is forwarded with the priority encoded in the tag or the default priority of the port. A value of enable(1) means the packet will be forwarded with t…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.14.4.2.1.4