CTRON-PRIORITY-CLASSIFY-MIB Table View

A table containing configuration information for each
Priority classification configured into the device by (local
or network) management.  All entries are permanent and
will be restored after the device is reset.

ctPriClassifyEntry row .1.3.6.1.4.1.52.4.1.2.14.6.1.4.1

Describes a particular entry of ctPriClassifyTable.

Indexes

ctPriClassifyPriority ctPriClassifyDataMeaning ctPriClassifyDataVal ctPriClassifyDataMask

Column	Syntax	OID
ctPriClassifyPriority The priority for this entry. Any packet meeting the classification criteria specified by this conceptual row will be given the priority indicated by this object.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.1
ctPriClassifyDataMeaning The meaning of the ctPriClassifyDataVal leaf for this conceptual row. The ctPriClassifyDataVal specifies a particular value which, when compared to packet data, is used to classify that packet to a particular priority.…	CtPriClassifyType Type Values: 1 etherType 2 llcDsapSsap 3 ipTypeOfService 4 ipProtocolType 5 ipxClassOfService 6 ipxPacketType 7 ipAddressSource 8 ipAddressDestination 9 ipAddressBilateral 10 ipxNetworkSource 11 ipxNetworkDestination 12 ipxNetworkBilateral 13 ipUdpPortSource 14 ipUdpPortDestination 15 ipUdpPortBilateral 16 ipTcpPortSource 17 ipTcpPortDestination 18 ipTcpPortBilateral 19 ipxSocketSource 20 ipxSocketDestination 21 ipxSocketBilateral 22 macAddressSource 23 macAddressDestination 24 macAddressBilateral 25 ipFragments	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.2
ctPriClassifyDataVal The data value associated with ctPriClassifyDataMeaning. The explicit range of this value is any unsigned 32-bit integer(0..4294967295). This range may vary, however, depending upon the value of ctPriClassifyDataMeani…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.3
ctPriClassifyDataMask This object is the one's complement of a 32-bit mask. This mask is applicable to the data comparison of ctPriClassifyDataVal. The mask is applied to the actual packet data under consideration through a logical bitwise …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.4
ctPriClassifyIngressList The set of ports on which this classification rule applies. Classification occurs on ingress. An agent implementation should allow a set operation of this object to create a row if it does not exist.	PortListr/w	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.5
ctPriClassifyRowStatus This object provides both control and status for the associated conceptual row in the table. Rows can be created in two ways. createAndGo - The specified row will be created and activated if the inst…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.6
ctPriClassifyRowInfo This object provides info about this row in the form of an ASCII string, suitable for display purposes. The intended purpose of this object is to provide an 'agent-specific' explanation as to why the ctPriClassifyRowSt…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.7
ctPriClassifyTOSStatus This object indicates whether an IP Type Of Service (TOS) value, defined by ctPriClassifyTOSValue, should be written into the TOS field of the IP header for any packet matching the classification specified by this conce…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.8
ctPriClassifyTOSValue The value to be written into the IP TOS field of the IP header of any packet that matches the classification specified by the conceptual row.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.1.2.14.6.1.4.1.9

A table containing information for each of the priority
classification types.  Types for which there is no
corresponding row are not supported by this device.

ctPriClassifyAbilityEntry row .1.3.6.1.4.1.52.4.1.2.14.6.1.5.1

Describes a particular entry of ctPriClassifyAbilityTable.

Indexes

ctPriClassifyAbility

Column	Syntax	OID
ctPriClassifyAbility The priority classification type associated with this entry.	CtPriClassifyType Type Values: 1 etherType 2 llcDsapSsap 3 ipTypeOfService 4 ipProtocolType 5 ipxClassOfService 6 ipxPacketType 7 ipAddressSource 8 ipAddressDestination 9 ipAddressBilateral 10 ipxNetworkSource 11 ipxNetworkDestination 12 ipxNetworkBilateral 13 ipUdpPortSource 14 ipUdpPortDestination 15 ipUdpPortBilateral 16 ipTcpPortSource 17 ipTcpPortDestination 18 ipTcpPortBilateral 19 ipxSocketSource 20 ipxSocketDestination 21 ipxSocketBilateral 22 macAddressSource 23 macAddressDestination 24 macAddressBilateral 25 ipFragments	.1.3.6.1.4.1.52.4.1.2.14.6.1.5.1.1
ctPriClassifyPorts The set of ports on which the classification type specified by ctPriClassifyAbility is supported.	PortList	.1.3.6.1.4.1.52.4.1.2.14.6.1.5.1.2