CTRON-ISDN-CONFIGURATION-MIB Table View

A list of D channnel interfaces entries. The list consists
of a single entry at this time.

isdnDchEntry row .1.3.6.1.4.1.52.4.1.2.7.4.1.1.1

A D channnel interface entry containing objects relating to
the particular D channel.

Indexes

isdnDchIndex

Column	Syntax	OID
isdnDchIndexmandatory A unique index for this D Channel of this ISDN-Controller.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.1
isdnDchRateAccessmandatory The Rate Access of this ISDN interface.	Enumeration Enumerated Values: 1 other 2 bri1 3 pri1 4 pri2	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.2
isdnDchAllowedChmandatory A bit string with bit 1 signifiying time slot 1. A set bit means that a B channel may be allocated on that time slot. A reset bit means the channel is reserved or otherwise out of service.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.3
isdnDchChInUsemandatory A bit string with bit 1 signifying time slot 1. A set bit means that a B channel has been allocated on that time slot. A reset bit means the channel is available, reserved, or otherwise out of service.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.4
isdnDchSupportedSwitchesmandatory A bit string with each bit position signifying support of a specific switch type as indicated by the list. A set bit means that that switch type is supported.	Enumeration Enumerated Values: 2 bri5ESS 5 bridms100 10 brini1 16 pri4ESS 17 pri5ESS	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.5
isdnDchSwitchTypemandatory Switch type selector as indicated by the list.	Enumerationr/w Enumerated Values: 2 bri5ESS 5 bridms100 10 brini1 16 pri4ESS 17 pri5ESS	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.6
isdnDchSPID1mandatory The Service profile identifier for BRI channel 1.	OctetStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.7
isdnDchSPID2mandatory The Service profile identifier for BRI channel 2.	OctetStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.8
isdnDchDirNum1mandatory The local directory number for BRI channel 1.	OctetStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.9
isdnDchDirNum2mandatory The local directory number for BRI channel 2.	OctetStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.10
isdnDchOperStatusmandatory The operational status of the signalling channel.	Enumeration Enumerated Values: 1 inactive 2 active	.1.3.6.1.4.1.52.4.1.2.7.4.1.1.1.11

The list of neighbors from which the managed device
will accept calls or to which it will place them.

dialCtlNbrCfgEntry row .1.3.6.1.4.1.52.4.1.2.7.4.1.2.1

A single Neighbor. This entry is effectively permanent,
and contains address information describing the neighbor.
The value of dialCtlNbrCfgOriginateAddress must be
specified before a new row in this table can become
ac…

Indexes

dialCtlNbrCfgId dialCtlNbrCfgIndex

Column	Syntax	OID
dialCtlNbrCfgIdmandatory This object defines a single neighbor. There may be several entries in this table for one neighbor, defining different ways of reaching this neighbor. Thus, there may be several entries in this table with the same value…	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.1
dialCtlNbrCfgIndexmandatory The index value which uniquely identifies an entry in this table.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.2
dialCtlNbrCfgIfIndexmandatory The ifIndex value of the interface associated with this neighbor.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.3
dialCtlNbrCfgOriginateAddressmandatory Call Address at which the neighbor will be called. Think of this as the set of characters following 'ATDT ' or the 'phone number' included in a D channel call request. The structure of this information will be switch ty…	DisplayStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.4
dialCtlNbrCfgAnswerAddressmandatory Calling Party Number information element, as for example passed in an ISDN SETUP message by a PBX or switch, for incoming calls. This address can be used to identify the neighbor. If this address is either unknown or id…	DisplayStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.2.1.5

The list of neighbors from which this device will accept calls or
to which it will place them.

rmtProfileEntry row .1.3.6.1.4.1.52.4.1.2.7.4.1.3.1

A single Neighbor. This entry is effectively permanent, and contains
information describing the neighbor.

Indexes

rmtProfileEntryIndex

Column	Syntax	OID
rmtProfileEntryIndexmandatory The index value which uniquely identifies an entry in this table.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.1
rmtProfileEntryNamemandatory ASCII name of the neighbor.	OctetStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.2
rmtProfileEntryMakerNamemandatory ASCII name of the manufacturer of the neighbor. In other words, it is a name by which to uniquely identify the remote access device to which the profile belongs.	OctetStringr/w	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.3
rmtProfileEntryActionmandatory Desired action for the neighbor interface	Enumerationr/w Enumerated Values: 1 idle 2 connect 3 hangup	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.4
rmtProfileEntryStatemandatory Current state of the neighbor interface	Enumeration Enumerated Values: 1 idle 2 calling 3 ringing 4 connected 5 answering 6 answered	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.5
rmtProfileEntryMaxNeighbormandatory The maximum allowable dialCtlNbrCfgIndex. It is the number of instances of the profile.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.6
rmtProfileEntryBchInUsemandatory A bit string with bit 1 signifiying B channel 1. A set bit means that this channel was assigned for current or last call.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.7
rmtProfileEntryLinkHeadmandatory A zero value signifies it is a primary profile. Otherwise, it is an instance profile and the value identifies the primary profile from which it was spawned.	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.8
rmtProfileEntryNextLinkmandatory A non-zero value identifies an instance profile. Whereas, a zero value either means it is a primary profile or the last instance of a primary profile.	Integer32 Constraints: range: 0-20	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.9
rmtProfileEntryMpCapablemandatory MP option selector. Set to a value of one when MP support is desired otherwise set to a value of two. The default setting is disabled. When enabled the attempt is made to negotiate MP support. Both parties must support…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.10
rmtProfileEntryMpLineUtilizationmandatory Used to set the Line Utilization Threshold (LUT) % to compare against the linear weighted percentage to determine when more/less bandwidth is to be added/removed. Linear weighting is computed (averaged) over the period …	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.11
rmtProfileEntryMpHistoryTimemandatory Used to set the history time value in seconds for the number of line utilization reading(s)/sample(s) desired to compute the average line utilization. It specifies the window size over which to to compute the average li…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.12
rmtProfileEntryMpMoreBWSamplesmandatory Used to set the number of consecutive line utilization average computations that must exceed the LUT % value as specified by the rmtProfileEntryMpLineUtilization object before allowing possible more bandwidth to be adde…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.13
rmtProfileEntryMpLessBWSamplesmandatory Used to set the number of consecutive line utilization average computations that must fall below the LUT % value as specified by the rmtProfileEntryMpLineUtilization object before removing possible previously added band…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.14
rmtProfileEntryMpMaxCallsAllowedmandatory Used to set the maxium number of channels an ISDN MP capable call is allowed.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.15
rmtProfileEntryMpCallsToAddmandatory Used to set the number of additional channel(s) (call(s)) to increment by whenever the need for more bandwidth is determined.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.16
rmtProfileEntryMpCallsToRemovemandatory Used to set the number of channel(s) (call(s)) to decrement by whenever the need for possible previously added additional bandwidth is determined to no longer be needed/desired.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.17
rmtProfileEntryMpAvgPktSizemandatory Used to set the average packet size by which to determine when its best to split a packet. This is an attempt to minimize the amount of buffering necessary at the remote device to maintain packet sequentiality.	Integer32r/w Constraints: range: 1-1500	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.18
rmtProfileEntryMpRmtBwCtrlmandatory MP remote bandwidth control selector. Set to a one when bandwidth changes are permitted by either side ie by both parties otherwise set to a value of two. The default setting is disabled. That is to say, only the caller…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.1.2.7.4.1.3.1.19

A table containing information about specific
calls to a specific destination.

callHistoryEntry row .1.3.6.1.4.1.52.4.1.2.7.4.2.2.1

The information regarding a single Connection.

Indexes

callHistoryIndex

Column	Syntax	OID
callHistorySetupTimemandatory The value of system up time when the call associated to this entry was started. This will be useful for an NMS to retrieve all calls after a specific time. Also, this object can be useful in finding large delays between…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.1
callHistoryIndexmandatory Index variable to access the CallHistoryEntry objects of the callHistoryTable.	Integer32 Constraints: range: 1-50	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.2
callHistoryPeerAddressmandatory The number this call is connected to. If the number is not available, then it will have a length of zero.	DisplayString	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.3
callHistoryNeighborIdmandatory This is the Id value of the neighbor table entry to which this call was made. If a neighbor table entry for this call does not exist, the value of this object will be zero.	Integer32 Constraints: range: 1-20	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.4
callHistoryLogicalIfIndexmandatory This is the ifIndex value of the logical interface through which this call was made.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.5
callHistoryDisconnectCausemandatory The encoded network cause value associated with this call. The value of this object will depend on the interface type as well as on the protocol and protocol version being used on this interface. The more common cause v…	Enumeration Enumerated Values: 1 unassignedNumber 2 noRouteToDestination 6 channelUnacceptable 16 normalCallClearing 17 userBusy 18 noUserResponding 21 callRejected 22 numberChangedAddress 28 invalidNumberFormat 31 normalUnspecified 34 noChannelAvailable 38 networkOutOfOrder 41 temporaryFailure 42 switchingEquipmentCongestion 43 userInfoDiscarded 44 requestedChannelNotAvailable 52 outgoingCallsBarred 54 incomingCallsBarred 58 bearerCapabilityNotPresentlyAvail 63 serviceNotAvailable 65 bearerServiceNotImplemented 66 channelTypeNotImplemented 70 onlyRestrictedChannelAvailable 79 serviceOrOptionNotImplemeted 81 invalidCallReferenceValue 82 identifiedChannelDoesNotExist 85 invalidDigitValueForAddress 88 incompatibleDestination 90 destinationAddressMissing 91 transitNetworkDoesNotExist 95 invalidMessageSpecified 96 mandatoryIEmissing 97 messageTypeNonexistentOrNotImplemented 98 messageNotCompatibleWithCallState 99 iEnotImplemented 100 invalidIEcontents 111 protocolError 133 callAlreadyActive 134 lineDisabled 135 badParameter 136 timeoutOccured 138 noCallActive	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.6
callHistoryConnectTimemandatory The value of system up time when the call was connected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.7
callHistoryDisconnectTimemandatory The value of system up time when the call was disconnected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.8
callHistoryCallOriginmandatory The call origin.	Enumeration Enumerated Values: 1 originate 2 answer 3 callback	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.9
callHistoryInfoTypemandatory The information type for this call.	Enumeration Enumerated Values: 1 other 2 speech 3 unrestrictedDigital 4 unrestrictedDigital56 5 restrictedDigital 6 audio31 7 audio7 8 video 9 packetSwitched	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.10
callHistoryTransmitPacketsmandatory The number of packets which were transmitted while this call was active.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.11
callHistoryTransmitBytesmandatory The number of bytes which were transmitted while this call was active.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.12
callHistoryReceivePacketsmandatory The number of packets which were received while this call was active.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.13
callHistoryReceiveBytesmandatory The number of bytes which were received while this call was active.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.1.2.7.4.2.2.1.14