CTRON-IPX-ROUTER-MIB Table View

This table contains an entry for each router port. This table is
indexed by nwIpxFwdIfIndex, which indicates the value of MIB2 
ifIndex, which identifies the router port for which the entry exists.

nwIpxFwdIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1

Each entry specifies the IPX Routing Services configuration for the
router port for which the entry exists.

Indexes

nwIpxFwdIfIndex

Column	Syntax	OID
nwIpxFwdIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.1
nwIpxFwdIfAdminStatusmandatory Sets the administrative state of IPX Routing Services on the router port for which the entry exists. Enabled (3) causes IPX Routing Services to become active. Disabled (2) causes it to become inactive.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.2
nwIpxFwdIfOperStatusmandatory Indicates the current operating condition of IPX Routing Services on the router port for which the entry exists. The value of nwIpxFwdIfOperStatus indicates any problem with the configuration of IPX Routing Services on…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.3
nwIpxFwdIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpxFwdIfOperStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.4
nwIpxFwdIfControlmandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	Enumerationr/w Enumerated Values: 1 other 2 add 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.5
nwIpxFwdIfMtumandatory Specifies the Maximum Transmission Unit (MTU) for IPX packets on the router port for which the entry exists. This includes the IPX header and data but does not include framing.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.6
nwIpxFwdIfForwardingmandatory Controls forwarding of IPX packets on the router port for which the entry exists. Enabled (3) causes IPX packets to be forwarded. Disabled (2) prevents IPX packets from being forwarded.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.7
nwIpxFwdIfFrameTypemandatory Specifies the framing type for IPX packets forwarded on the router port for which the entry exists. Some frame types are valid for specific media types. The comments reflect those valid media types.	Enumerationr/w Enumerated Values: 1 other 2 ethernet 3 snap 4 i8022 6 novell 8 nativewan 9 encapenet 10 encapenet8022 11 encapenetsnap 12 encapenetnovell 13 encaptr8022 14 encaptrsnap 15 encapfddi8022 16 encapfddisnap 17 canonical	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.8
nwIpxFwdIfAclIdentifiermandatory Specifies the Access Control ID of the Access Control List in effect for IPX packets being routed on the router port for which the entry exists. A value of 0 indicates that no Access Control List is in effect.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.9
nwIpxFwdIfAclStatusmandatory Controls the operation of any Access Control List configured for IPX traffic on the router port for which the entry exists. Enabled (3) applies the Access Control List indicated by the value of nwIpxFwdIfAclIdentifier t…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.10
nwIpxFwdIfCacheControlmandatory Controls IPX Address caching on the router port for which the entry exists. When IPX Address caching is enabled, IPX Addresses used for address validation, filtering, and forwarding are stored in the cache. This cache i…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.11
nwIpxFwdIfCacheEntriesmandatory Indicates the number of entries in the IPX Address cache on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.12
nwIpxFwdIfCacheHitsmandatory Indicates the number of times entries in the IPX Adddress cache have been used to provide the IPX Address required to validate, filter, or forward an IPX packet on the router port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.13
nwIpxFwdIfCacheMissesmandatory Indicates the number of times the IPX Address required to validate, filter, or forward an IPX packet on the router port was not found in the IPX Address cache.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.1.1.14

This table contains an entry for each Novell network address assigned
to each router port.

nwIpxAddrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1

Each entry specifies the Novell network addressing information for
the logical Novll network for which the entry exists.

Indexes

nwIpxAddrIfIndex nwIpxAddrIfAddress

Column	Syntax	OID
nwIpxAddrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.1
nwIpxAddrIfAddressmandatory This is the Novell network number assigned to the logical Novell network for which the entry exists. The IpxAddress consists of a network number of 4 octets.	IpxAddress	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.2
nwIpxAddrIfControlmandatory Set this object to add or delete this entry from the table.	Enumerationr/w Enumerated Values: 1 other 2 add 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.3
nwIpxAddrIfAddrTypemandatory Specifies whether the Novell network number, nwIpxAddrIfAddress, is the primary or secondary address for the router port.	Enumerationr/w Enumerated Values: 1 other 2 primary 3 secondary	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.1.2.1.4

This table contains an entry for each router port configured and
enabled for IPX Routing Services.

nwIpxFwdIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1

Each entry indicates the current packet and byte count of IPX packets
on the port for which the entry exists.

Indexes

nwIpxFwdIfCtrIfIndex

Column	Syntax	OID
nwIpxFwdIfCtrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.1
nwIpxFwdIfCtrAdminStatusmandatory Sets the administrative state of the per-port IPX packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become …	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.2
nwIpxFwdIfCtrResetmandatory Resets the per-port IPX packet and byte counters on the router port for which this entry exists. Reset (2) resets the counters to 0. nwIpxFwdIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.3
nwIpxFwdIfCtrOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpxFwdIfCtrAdminStatus has been in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.4
nwIpxFwdIfCtrInPktsmandatory Indicates the total number of IPX packets that have been received, during nwIpxFwdIfCtrOperationaltime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.5
nwIpxFwdIfCtrOutPktsmandatory Indicates the total number of IPX packets that have been transmitted, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.6
nwIpxFwdIfCtrFwdPktsmandatory Indicates the total number of IPX packets that have been forwarded, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.7
nwIpxFwdIfCtrFilteredPktsmandatory Indicates the total number of IPX packets that have been administratively filtered, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.8
nwIpxFwdIfCtrDiscardPktsmandatory Indicates the total number of IPX packets that have been discarded (dropped), during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.9
nwIpxFwdIfCtrAddrErrPktsmandatory Indicates the total number of IPX packets that have been discarded because of IPX addressing errors in the IPX header, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.10
nwIpxFwdIfCtrLenErrPktsmandatory Indicates the total number of IPX packets that have been discarded because an invalid packet length was contained in the IPX header, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.11
nwIpxFwdIfCtrHdrErrPktsmandatory Indicates the total number of IPX packets that have been discarded because of an invalid IPX header, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.12
nwIpxFwdIfCtrInBytesmandatory Indicates the total number of bytes in the IPX packets that have been received, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.13
nwIpxFwdIfCtrOutBytesmandatory Indicates the total number of bytes in the IPX packets that have been transmitted, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.14
nwIpxFwdIfCtrFwdBytesmandatory Indicates the total number of bytes in the IPX packets that have been forwarded, during nwIpxFwdCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.15
nwIpxFwdIfCtrFilteredBytesmandatory Indicates the total number of bytes in the IPX packets administratively filtered, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.16
nwIpxFwdIfCtrDiscardBytesmandatory Indicates the total number of bytes in the IPX packets that have been discarded, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.17
nwIpxFwdIfCtrHostInPktsmandatory Indicates the total number of IPX packets that have been successfully delivered to the local host, during nwIpxFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.18
nwIpxFwdIfCtrHostOutPktsmandatory Indicates the total number of IPX packets that have been forwarded by the local host, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.19
nwIpxFwdIfCtrHostDiscardPktsmandatory Indicates the total number of IPX packets that have been discarded by the local host, due to a lack of host resources, during nwIpxFwdIfCtrOperationalTime, that were received on the router port for which the entry exis…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.20
nwIpxFwdIfCtrHostInBytesmandatory Indicates the total number of bytes in the IPX packets that have been successfully delivered to the local host, during nwIpxFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.21
nwIpxFwdIfCtrHostOutBytesmandatory Indicates the total number of bytes in the IPX packets that have been transmitted by the local host, during nwIpxFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.22
nwIpxFwdIfCtrHostDiscardBytesmandatory Indicates the total number of bytes in the IPX packets that have been discarded by the local host, due to a lack of host resources that were received, during nwIpxFwdIfCtrOperationalTime, that were received on the rou…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.2.2.2.1.1.23

This table contains an entry for each router port. Each entry can
contain different values, allowing the routing protocol configuration
to vary from router port to router port. This table is indexed by
nwIpxRipIfIndex, which indicates the value of MIB 2 ifindex, which
identifies the router port for which each entry exists.

nwIpxRipIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1

Each entry contains the IPX-RIP configuration for the router port for
which the entry exists.

Indexes

nwIpxRipIfIndex

Column	Syntax	OID
nwIpxRipIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.1
nwIpxRipIfAdminStatusmandatory Sets the administrative state of the IPX-RIP routing protocol on the router port for which the entry exists. Enabled (3) causes IPX-RIP to become active on the router port. Disabled (2) causes RIP to become inactive.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.2
nwIpxRipIfOperStatusmandatory Indicates the current operating condition of the IPX-RIP routing protocol on the router port for which the entry exists. The value of nwIpxRipIfOperStatus indicates any problem with your IPX-RIP configuration on the rou…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.3
nwIpxRipIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpxRipIfOperStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.4
nwIpxRipIfVersionmandatory Indicates the revision level of the IPX-RIP routing protocol in textual format.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.5
nwIpxRipIfAdvertisementmandatory Sets the interval, in seconds, at which IPX-RIP advertises its route table on the router port for which the entry exists. Change this value to cause IPX-RIP to advertise its route table more or less frequently.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.6
nwIpxRipIfFloodDelaymandatory Specifies the length of time, in seconds, that the IPX-RIP routing protocol will wait after discovering that a directly connected route has gone down, before flooding updates (triggered updates) on the router port for w…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.7
nwIpxRipIfRequestDelaymandatory Specifies the length of time, in seconds, that the IPX-RIP routing protocol will wait after receiving a route request packet before sending a response on the router port for which the entry exists. A value of 0 specifie…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.8
nwIpxRipIfPrioritymandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.9
nwIpxRipIfHelloTimermandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting t…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.10
nwIpxRipIfSplitHorizonmandatory Controls the operation of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, IPX-RIP keeps track of which router port route information is received on, and prevents information a…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.11
nwIpxRipIfPoisonReversemandatory Controls the operation of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, IPX-RIP advertises any downed route as unreachable during the period of time that it must wait (nwI…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.12
nwIpxRipIfSnoopingmandatory Controls the operation of IPX-RIP Snooping on the router port. When RIP Snooping is enabled the IPX-RIP routing protocol operates in passive mode, so that it receives route information, builds and maintains a route tabl…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.13
nwIpxRipIfTypemandatory Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, IPX-RIP advertisements are sent out one broadcast packet per router port…	Enumeration Enumerated Values: 1 other 2 bma 3 nbma	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.14
nwIpxRipIfXmitCostmandatory This object does not apply to this protocol. It is a common object, inherited from the common MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Set…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.15
nwIpxRipIfAclIdentifiermandatory Specifies the Access Control ID of the access control list in effect for IPX-RIP routing protocol packets on the router port for which the entry exists. A value of 0 indicates that there is no access control list in eff…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.16
nwIpxRipIfAclStatusmandatory Controls the operation of the access control list identified by nwIpxRipIfAclIdentifier. Enabled (3) applies the access control list to all IPX-RIP routing protocol packet traffic on the router port for which the entry…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.1.1.1.17

This table contains an entry for each router port.This table is
indexed by nwIpxRipIfCtrIfIndex, which indicates the value of MIB2
ifindex, which indentifies the router port for which the entry exists.

nwIpxRipIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1

Each entry indicates the current packet and byte count of IPX-RIP
routing protocol packets on the router port for which the entry
exists.

Indexes

nwIpxRipIfCtrIfIndex

Column	Syntax	OID
nwIpxRipIfCtrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.1
nwIpxRipIfCtrAdminStatusmandatory Sets the administrative state of the per-port IPX-RIP packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to b…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.2
nwIpxRipIfCtrResetmandatory Resets the per-port IPX-RIP packet and byte counters on the router port for which this entry exists. Reset (2) resets the counters to 0. nwIpxRipIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.3
nwIpxRipIfCtrOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpRipIfCtrAdminStatus has been in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.4
nwIpxRipIfCtrInPktsmandatory Indicates the total number of IPX-RIP routing protocol packets that have been received, during nwIpxRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.5
nwIpxRipIfCtrOutPktsmandatory Indicates the total number of IPX-RIP routing protocol packets that have been transmitted, during nwIpxRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.6
nwIpxRipIfCtrFilteredPktsmandatory Indicates the total number of IPX-RIP routing protocol packets that have been administratively filtered, during nwIpxRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.7
nwIpxRipIfCtrDiscardPktsmandatory Indicates the total number of IPX-RIP routing protocol packets that have been discarded, during nwIpxRipIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.8
nwIpxRipIfCtrInBytesmandatory Indicates the total number of bytes in the IPX-RIP routing protocol packets that have been received, during nwIpxRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.9
nwIpxRipIfCtrOutBytesmandatory Indicates the total number of bytes in the IPX-RIP routing protocol packets that have been transmitted, during nwIpxRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.10
nwIpxRipIfCtrFilteredBytesmandatory Indicates the total number of bytes in the IPX-RIP routing protocol packets that have been administratively filtered, during nwIpxRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.11
nwIpxRipIfCtrDiscardBytesmandatory Indicates the total number of bytes in the IPX-RIP routing protocol packets that have been discarded, during nwIpRipIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.2.2.1.1.12

This table contains the IPX-RIP route table. This table contains an
entry for each route learned through the IPX-RIP routing protocol. 
Only the best routes from this table are added to the IPX forwarding
table to be used for packet switching.

nwIpxRipRouteEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1

Each entry describes the IPX-RIP route to the destination network
for which the entry exists.

Indexes

nwIpxRipRtNetId nwIpxRipRtIfIndex nwIpxRipRtSrcNode

Column	Syntax	OID
nwIpxRipRtNetIdmandatory This is the primary index into the IPX-RIP route table. This number indicates the Novell Network Number of the destination for which the entry exists. The IpxAddress consists of a network number of 4 octets	IpxAddress	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.1
nwIpxRipRtIfIndexmandatory This is a secondary index into the IPX-RIP route table. This number corresponds to the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.2
nwIpxRipRtSrcNodemandatory This is a secondary index into the RIP route table. This number indicates the MAC-layer address of the source router from which this route was learned. A value of 0.0.0.0.0.0 indicates that the source is on the network …	IpxAddress	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.3
nwIpxRipRtHopsmandatory Indicates the number of hops required to reach the destination for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.4
nwIpxRipRtTicksmandatory Indicates the amount of time (number of Time Ticks) required to reach the destination for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.5
nwIpxRipRtAgemandatory Indicates the amount of time, in seconds, since an update has been received for the route for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.6
nwIpxRipRtTypemandatory Indicates whether the destination network is directly connected through the router port specified by nwIpxRipRtIndex, or is indirectly connected through another router, specified by nwIpxRipRtSrcNode.	Enumeration Enumerated Values: 1 other 2 invalid 3 direct 4 remote	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.7
nwIpxRipRtFlagsmandatory Specifies properties of the IPX-RIP route. The bit mask is as follows: source-changed (1), best source (2), local-net (4), net-down (8), update-fib-only (16).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.1.3.1.1.8

This table contains an entry for each router port. Each entry can
contain different values, allowing the SAP configuration to vary from
router port to router port. This table is indexed by nwIpxSapIfIndex,
which indicates the value of MIB 2 ifindex, which identifies the router
port for which each entry exists.

nwIpxSapIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1

Each entry contains the SAP configuration for the router port for
which the entry exists.

Indexes

nwIpxSapIfIndex

Column	Syntax	OID
nwIpxSapIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.1
nwIpxSapIfAdminStatusmandatory Sets the administrative state of the SAP protocol on the router port for which the entry exists. Enabled (3) causes SAP to become active on the router port. Disabled (2) causes SAP to become inactive.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.2
nwIpxSapIfOperStatusmandatory Indicates the current operating condition of the SAP protocol on the router port for which the entry exists. The value of nwIpxSapIfOperStatus indicates any problem with your SAP configuration on the router port. A valu…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.3
nwIpxSapIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpxSapIfOperStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.4
nwIpxSapIfVersionmandatory Indicates the revision level of the SAP protocol in textual format.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.5
nwIpxSapIfAdvertisementmandatory Sets the interval, in seconds, at which SAP advertises its server table on the router port for which the entry exists. Change this value to cause SAP to advertise its server table more or less frequently.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.6
nwIpxSapIfFloodDelaymandatory Specifies the length of time, in seconds, that the SAP protocol will wait after discovering that a directly connected route has gone down, before flooding updates (triggered updates) on the router port for which the ent…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.7
nwIpxSapIfRequestDelaymandatory Specifies the length of time, in seconds, that the SAP protocol will wait after receiving a server request packet, before sending a response on the router port for which the entry exists. A value of 0 specifies that if …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.8
nwIpxSapIfPrioritymandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting this obj…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.9
nwIpxSapIfHelloTimermandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a management interface to all the Cabletron Routing Services protocol-specific MIBs.Setting this objec…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.10
nwIpxSapIfSplitHorizonmandatory Controls the operation of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, SAP keeps track of which router port information is received on, and prevents information about a ser…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.11
nwIpxSapIfPoisonReversemandatory Controls the operation of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, SAP advertises any downed server as unreachable during the period of time that it must wait (nwIpxS…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.12
nwIpxSapIfSnoopingmandatory Controls the operation of SAP Snooping on the router port. When SAP Snooping is enabled SAP operates in passive mode, so it receives service information, builds and maintains a server table, but does not advertise or se…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.13
nwIpxSapIfTypemandatory Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, SAP advertisements are sent out, one broadcast packet per router port. If…	Enumeration Enumerated Values: 1 other 2 bma 3 nbma	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.14
nwIpxSapIfXmitCostmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.15
nwIpxSapIfAclIdentifiermandatory Specifies the Access Control List ID of the access control list in effect for SAP protocol packets on the router port for which the entry exists. A value of 0 indicates that there is no access control list in effect fo…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.16
nwIpxSapIfAclStatusmandatory Controls the operation of the access control list identified by nwIpxSapIfAclIdentifier. Enabled (3) causes the access control list to be applied to all SAP protocol packet traffic on the router port for which the entr…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.17

This table contains an entry for each router port. This table is
indexed by nwIpxSapIfCtrIfIndex which indicates the value of MIB2
ifindex, which indentifies the router port for which the entry 
exists.

nwIpxSapIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1

Each entry indicates the current packet and byte count of SAP
protocol packets on the router port for which the entry exists.

Indexes

nwIpxSapIfCtrIfIndex

Column	Syntax	OID
nwIpxSapIfCtrIfIndexmandatory Indicates the value of the MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.1
nwIpxSapIfCtrAdminStatusmandatory Sets the administrative state of the per-port SAP packet and byte counters on the router port for which this entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.2
nwIpxSapIfCtrResetmandatory Resets the per-port SAP packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwIpxSapIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.3
nwIpxSapIfCtrOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpxSapIfCtrAdminStatus has been in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.4
nwIpxSapIfCtrInPktsmandatory Indicates the total number of SAP protocol packets that have been received, during nwIpxSapIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.5
nwIpxSapIfCtrOutPktsmandatory Indicates the total number of SAP packets that have been transmitted, during nwIpxSapIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.6
nwIpxSapIfCtrFilteredPktsmandatory Indicates the total number of SAP packets that have been administratively filtered, during nwIpxSapIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.7
nwIpxSapIfCtrDiscardPktsmandatory Indicates the total number of SAP packets that have been discarded, during nwIpxSapIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.8
nwIpxSapIfCtrInBytesmandatory Indicates the total number of bytes in the SAP packets that have been received, during nwIpxSapIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.9
nwIpxSapIfCtrOutBytesmandatory Indicates the total number of bytes in the SAP packets that have been transmitted, during nwIpxSapIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.10
nwIpxSapIfCtrFilteredBytesmandatory Indicates the total number of bytes in the SAP packets that have been administratively filtered, during nwIpxSapIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.11
nwIpxSapIfCtrDiscardBytesmandatory Indicates the total number of bytes in the SAP packets that have been discarded, during nwIpxSapIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.2.1.1.12

The table contains the SAP server table. This table contains an entry
for each service learned of through the SAP protocol.

nwIpxSapServerIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1

Each entry contains the SAP route information for the Novell server
and router port for which the entry exists.

Indexes

nwIpxSapServerIfNetId nwIpxSapServerIfNode nwIpxSapServerIfSocket nwIpxSapServerIfServiceType nwIpxSapServerIfIfNum nwIpxSapServerIfSrcNode

Column	Syntax	OID
nwIpxSapServerIfNetIdmandatory This is the primary index into the SAP server table. This number corresponds to the Novell Network Number of the server offering the service. The network number consists of 4 octets.	IpxAddress	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.1
nwIpxSapServerIfNodemandatory This is a secondary index into the SAP Server Table. This is the MAC-layer address represented as an octetstring of the service offering the server for which the entry exists, represented as an octet string.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.2
nwIpxSapServerIfSocketmandatory This is a secondary index into the SAP Server Table. This is the socket number of the server application for which the entry exists.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.3
nwIpxSapServerIfServiceTypemandatory This is a secondary index into the SAP Server Table. This is the service type of the server application for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.4
nwIpxSapServerIfIfNummandatory Indicates the value of MIB 2 ifindex, which identifies the router port through which the service for which the entry exits is available.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.5
nwIpxSapServerIfSrcNodemandatory This is the MAC-layer address of the neighbor router from which the service was learned about.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.6
nwIpxSapServerIfNamemandatory This is the name of the server offering the service for which the entry exists.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.7
nwIpxSapServerIfHopsmandatory Indicates the number of hops required to reach the server offering the service for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.8
nwIpxSapServerIfAgemandatory Indicates the amount of time since a SAP update was last received for the server and service for which the entry exits.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.9
nwIpxSapServerIfTypemandatory Indicates whether the server is on a network that is directly connected through the router port for which the entry exists, or is indirectly connected through another router specified by the value of nwIpxSapServerIfSrc…	Enumeration Enumerated Values: 1 other 2 invalid 3 direct 4 remote	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.10
nwIpxSapServerIfFlagsmandatory Specifies properties of the SAP service for which the entry exist. The bit mask is as follows: source-changed (1), best-source (2), not used (4), net-down (8), not used (16).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.3.1.1.11

This table contains an entry describing each route being used to
forward IPX traffic to each destination Novell network and node.

nwIpxFibEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1

Each entry describes the route to the destination Novell network and
node for which the entry exists.

Indexes

nwIpxFibNetId

Column	Syntax	OID
nwIpxFibNetIdmandatory Specifies the Novell Network Number of the destination for which the entry exists. The IpxAddress consists of four octets	IpxAddress	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.1
nwIpxFibHopsmandatory Indicates the number of hops required to reach the destination for which the entry exists. It is considered as metric 1.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.2
nwIpxFibTimeTicksmandatory Indicates the amount of time, indicated by the number of TimeTicks, required for a packet to reach the destination network for which the entry exists. It is considered as metric 2.	RFC1155-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.3
nwIpxFibNextHopIfmandatory Indicates the router port through which the next hop node is available. Packets destined for the network specified by the value of nwIpxFibNetId will be forwarded on this port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.4
nwIpxFibNextHopNetmandatory Indicates the Novell Network Number portion of the fully formed next hop IPX Address of the next hop node.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.5
nwIpxFibNextHopNodemandatory Indicates the node portion of the fully formed next hop IPX Address.	r/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.6
nwIpxFibRouteTypemandatory Indicates the status of the route. A value of 3 indicates that the destination is on the network segment that is directly connected to the router port identified by nwIpxFibNextHopIf. A value of 4 indicates that the des…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 direct 4 remote	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.5.1.1.7

The Ipx Address translation table used for mapping 
an IPX address to a circuit identifier (if applicable), 
corresponding port number, and framing type.

nwIpxHostMapEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1

Each entry contains one IpxAddress to circuit
equivalence. Also provided is the framing required to
converse with this host, and the corresponding logical
port number.

Indexes

nwIpxHostMapIfIndex nwIpxHostMapIpxAddr

Column	Syntax	OID
nwIpxHostMapIfIndexmandatory This is the primary (major) index into the Ipx HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the IPX router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.1
nwIpxHostMapIpxAddrmandatory The IpxAddress of the host on the corresponding interface and circuit (if applicable). The IpxAddress consists of a network number of 4 octets followed by 6 octets of node identifier.	IpxAddress	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.2
nwIpxHostMapPhysAddrmandatory The media-dependent 'physical' address. The value of this object is 0 for entries indicating native-wan(8) framing.	RFC1213-MIBPhysAddressr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.3
nwIpxHostMapTypemandatory Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwIpxHostMapTable. That is, it effectively dissasociates the circuit and/or interface identified with said entr…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 dynamic 4 static 5 inactive	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.4
nwIpxHostMapCircuitIDmandatory The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the IPX Address at the end of the circuit. For non-WAN interfaces, the value of t…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.5
nwIpxHostMapFramingmandatory Specifies the framing type required to converse with the host for which this entry exists.	Enumerationr/w Enumerated Values: 1 other 2 ethernet 3 snap 4 i8022 6 novell 8 nativewan 9 encapenet 10 encapenet8022 11 encapenetsnap 12 encapenetnovell 13 encaptr8022 14 encaptrsnap 15 encapfddi8022 16 encapfddisnap 17 canonical	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.6
nwIpxHostMapPortNumbermandatory The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of configured interfaces in the system and the number of circuits present on those inte…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.6.3.1.1.7

This table contains the access control list information for IPX
traffic. This table contains entries, each of which allows packet
forwarding between source/destination pairs to be permitted or denied.
The list is identified by the Access Control List ID. Each list may
contain multiple entries ordered by sequence number. When a particular
access control list is searched, it is searched in sequence number
order and the first match found ends the search. If no match if found,
access defaults to permitted.

nwIpxAclEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1

Each entry contains IPX source/destination access information.

Indexes

nwIpxAclIdentifier nwIpxAclSequence

Column	Syntax	OID
nwIpxAclIdentifiermandatory This is the primary (major) index into the IPX access control list table. This value identifies the access control list by a unique identifier (at least 1) arbitrarily assigned by the user. All entries that have the sam…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.1
nwIpxAclSequencemandatory This is the secondary (minor) index into the IPX access control list table. This number corresponds to a sequence number used to order multiple entries within the same access control list.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.2
nwIpxAclPermissionmandatory Specifies whether access is allowed or denied between the source and destination address pair. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry se…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permit 4 deny 5 permit-bidirectional 6 deny-bidirectional	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.3
nwIpxAclMatchesmandatory Indicates the number of matches on this entry that have resulted in the permit/deny access restriction being applied as part of the forwarding process.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.4
nwIpxAclDestNetNummandatory Specifies the destination Novell Network Number used to compare for matches on the access control list. A 0 value is a wildcard which matches any Novell Network Number.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.5
nwIpxAclDestNodemandatory Specifies the MAC-layer address of the destination node (represented as an octet string), used to compare for matches on the access control list. A value 0 is a wildcard, which matches any node.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.6
nwIpxAclDestSocketmandatory Specifies the socket number of the destination socket used to compare for matches on the access control list. A 0 value is a wildcard matching any socket.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.7
nwIpxAclSrcNetNummandatory Specifies the Novell Network Number of the source Novell Network used to compare for matches on the access control list. A 0 value is a wildcard matching any Novell Network Number.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.8
nwIpxAclSrcNodemandatory Specifies the MAC-layer address of the source node (represented as an octet string), used to compare for matches on the Access Control List. A 0 value is a wildcard matching any node.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.9
nwIpxAclSrcSocketmandatory Specifies the socket number of the source socket to compare for matches on the Access Control List. A 0 value is a wildcard matching any socket.	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.7.2.1.10

This table contains an entry for each router port. Each entry can
contain different values, allowing the NetBIOS Broadcast Redirector
configuration to vary from router port to router port. This table is
indexed by nwIpxNetBIOSIfIndex, which indicates the value of MIB 2
ifindex, which identifies the router port for which the entry exists.

nwIpxNetBIOSIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1

Each entry contains the IPX NetBIOS broadcasting configuration for
the router port for which the entry exists.

Indexes

nwIpxNetBIOSIfIndex

Column	Syntax	OID
nwIpxNetBIOSIfIndexmandatory Indicates the value in MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.1
nwIpxNetBIOSIfAdminStatusmandatory Sets the administrative state of IPX NetBIOS broadcasting on the router port for which the entry exists. Enabled (3) causes this router port to become active. Disabled (2) causes it to become inactive.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.2
nwIpxNetBIOSIfOperStatusmandatory Indicates the current operating condition of IPX NetBIOS broadcasting on the IPX router port for which the entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.3
nwIpxNetBIOSIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that IPX NetBIOS broadcasting, nwIpxNetBIOSIfOperStatus, has been in its current state on the router port for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.1.1.1.4

This table contains the IPX NetBIOS packet and byte counters for each
router port on this device.

nwIpxNetBIOSIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1

This is the primary index into the NetBIOS Interface Counter Table.
This number corresponds to the index into the MIB 2 Interface Table
which describes the router port for which this entry exists.

Indexes

nwIpxNetBIOSIfCtrIfIndex

Column	Syntax	OID
nwIpxNetBIOSIfCtrIfIndexmandatory This is the primary index into the IPX NetBIOS Interface Counter Table. This number correspoonds to the index into the MIB 2 Interface Table which describes the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.1
nwIpxNetBIOSIfCtrAdminStatusmandatory Sets the administrative state of the IPX NetBIOS packet and bytes counters on the IPX router port for which the entry exists. Enabled (3) causes these counters to become active on the configured NetBIOS router port. Dis…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.2
nwIpxNetBIOSIfCtrResetmandatory Resets the NetBIOS packet and bvyte counters on the router port for which the entry exists. Reset (2) resets the interface-specific counters to 0. nwIpxNetBIOSIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.3
nwIpxNetBIOSIfCtrOperationalTimemandatory Indicates the amount of time, in hundredths of a second, that the interface-specific NetBIOS packet and byte counters have been active on the router port for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.4
nwIpxNetBIOSIfCtrInPktsmandatory Indicates the total number of NetBIOS packets that have been recieved, on the router port for which the entry exists, during nwIpxNetBIOSIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.5
nwIpxNetBIOSIfCtrOutPktsmandatory Indicates the total number of NetBIOS packets that have been transmitted, on the router port for which the entry exists, during nwIpxNetBIOSIfCtrOperationallTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.6
nwIpxNetBIOSIfCtrFilteredPktsmandatory Indicates the total number of NetBIOS packets that have been administratively filtered, on the router port for which the entry exists, during nwIpxNetBIOSIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.7
nwIpxNetBIOSIfCtrDiscardPktsmandatory Indicates the total number of NetBIOS packets that have been discarded, on the router port for which the entry exists, during nwIpxNetBIOSIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.8
nwIpxNetBIOSIfCtrInBytesmandatory Indicates the total number of bytes in the NetBIOS packets that have been recieved, on the router port for which the entry exists, during nwIpxNetBIOSIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.9
nwIpxNetBIOSIfCtrOutBytesmandatory Indicates the total number of bytes in the NetBIOS packets that have been transmitted, on the router port for which the entry exists, during nwIpxNetBIOSIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.10
nwIpxNetBIOSIfCtrFilteredBytesmandatory Indicates the total number of bytes in the NetBIOS packets that have been administratively filtered, that were recieved on the router port for which the entry exists during nwIpxNetBIOSIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.11
nwIpxNetBIOSIfCtrDiscardBytesmandatory Indicates the total number of bytes in the NetBIOS packets that have been discarded, on the router port for which the entry exists, during nwIpxNetBIOSIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.1.2.2.1.1.12

This table contains an entry for each router port configured for the
IPX distance-vector based routing protocol. Each entry can contain
different values, allowing the routing protocol configuration to
vary from router port to router port. This table is indexed by
nwIpxBcastIfIndex, which indicates the value of MIB 2 ifindex, which
identifies the router port for which the entry exists.

nwIpxBcastIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1

Specifies the IPX Broadcast configuration information for the
logical IPX interface for which this entry exists.

Indexes

nwIpxBcastIfIndex

Column	Syntax	OID
nwIpxBcastIfIndexmandatory This index corresponds to the primary index into the MIB 2 Interface Table, which describes the router port for which the entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.1
nwIpxBcastIfAdminStatusmandatory Sets the administrative state of the IPX Broadcast on the router port for which the entry exists. Enabled (2) causes IPX Broadcast on this router port to become active. Disabled (2) causes IPX Broadcast to become inacti…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.2
nwIpxBcastIfOperStatusmandatory Indicates the current operating condition of the IPX Broadcast on the router port for which the entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.3
nwIpxBcastIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIPXBcastIfOperStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.1.1.1.4

This table contains the IPX Broadcast packet and byte counters for each
router port on this device.

nwIpxBcastIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1

This is the primary index into the Broadcast Interface Counter Table.
This number corresponds to the index into the MIB 2 Interface Table
which describes the router port for which the entry exists.

Indexes

nwIpxBcastIfCtrIfIndex

Column	Syntax	OID
nwIpxBcastIfCtrIfIndexmandatory This is the primary index into the IPX Broadcast Interface Counter Table. This number corresponds to the index into the MIB 2 Interface Table which describes the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.1
nwIpxBcastIfCtrAdminStatusmandatory Sets the administrative state of the IPX Broadcast packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become acive on the configured IPX Broadcast router port. D…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.2
nwIpxBcastIfCtrResetmandatory Resets the IPX Broadcast packet and byte counters on the router port for which the entry exists. Reset (2) resets the interface-specific counters to 0. nwIpxBcastIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.3
nwIpxBcastIfCtrOperationalTimemandatory Indicates the amount of time, in hundredths of a second, that the interface-specific IPX Broadcast packet and byte counters have been in the current administrative state on the router port for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.4
nwIpxBcastIfCtrInPktsmandatory Indicates the total number of IPX Broadcast packets that have been recieved, on the router port for which the entry exists, during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.5
nwIpxBcastIfCtrOutPktsmandatory Indicates the total number of Broadcast packets that have been transmitted, on the router port for which the entry existsl, during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.6
nwIpxBcastIfCtrFilteredPktsmandatory Indicates the total number of IPX Broadcast packets that have been administratively filtered, on the router port for which the entry exists, during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.7
nwIpxBcastIfCtrDiscardPktsmandatory Indicates the total number of Broadcast packets that have been dis- carded, on the router port for which the entry exists, during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.8
nwIpxBcastIfCtrInBytesmandatory Indicates the total number of bytes in the IPX Broadcast packets that have been recieved, on the router port for which the entry exists, during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.9
nwIpxBcastIfCtrOutBytesmandatory Indicates the total number of bytes in the IPX Broadcast packets that have been transmitted, on the router port for which the entry exists, during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.10
nwIpxBcastIfCtrFilteredBytesmandatory Indicates the total number of bytes in the IPX Broadcast packets that have been administratively filtered on the router port for which the entry exists during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.11
nwIpxBcastIfCtrDiscardBytesmandatory Indicates the total number of bytes in the IPX Broadcast packets that have been discarded on the router port for which the entry exists, during nwIpxBcastIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.2.2.2.1.1.12

This table contains an entry for each router port configured for IPX
Echo. Each entry can contain different values, allowing the routing
protocol configuration to vary from router port to router port. This
table is indexed by nwIpxEchoIfIndex, which indicates the value of
MIB 2 ifindex, which identifies the router port for which the entry
exists.

nwIpxEchoIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1

Specifies the IPX Echo information for the logical IPX interface for
which the entry exists.

Indexes

nwIpxEchoIfIndex

Column	Syntax	OID
nwIpxEchoIfIndexmandatory This index corresponds to the primary index into the MIB 2 ifTable, which describes the router port for which the entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.1
nwIpxEchoIfAdminStatusmandatory Sets the administrative state of IPX Echo on the router port for which the entry exists. Enabled (2) causes this router port to become active. Disabled (3) causes this router port to become inactive.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.2
nwIpxEchoIfOperStatusmandatory Indicates the current operating condition of IPX Echo on the router port for which the entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.3
nwIpxEchoIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpxEchoIfAdminStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.1.1.1.4

This table contains the IPX Echo packet and byte counters for each
router port on this device.

nwIpxEchoIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1

This is the primary index into the Echo Interface Counter Table. This
number corresponds to the index into the MIB 2 Interface Table which
describes the router port for which the entry exists.

Indexes

nwIpxEchoIfCtrIfIndex

Column	Syntax	OID
nwIpxEchoIfCtrIfIndexmandatory This is the primary index into the IPX Echo Interface Counter Table. This number corresponds to the index into the MIB 2 Interfcace Table which describes the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.1
nwIpxEchoIfCtrAdminStatusmandatory Sets the administrative state of the IPX Echo packet and byte counters on the IPX router port for which the entry exists. Enabled (3) causes these counters to become active on the router port configured for IPX Echo. Di…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.2
nwIpxEchoIfCtrResetmandatory Resets the IPX Echo packet andbyte counters on the router port for which the entryexists. Reset (2) resets the interface-specific counters to 0. nwIpxEchoIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.3
nwIpxEchoIfCtrOperationalTimemandatory Indicates the amount of time, in hundredths of a second, that the interface-specific IPX Echo packet and byte counters have been in the current administrative state on the router port for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.4
nwIpxEchoIfCtrInPktsmandatory Indicates the total number of IPX Echo packets that have been recieved, on the router port for which the entry exists, during nwIpxEchoIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.5
nwIpxEchoIfCtrOutPktsmandatory Indicates the total number of IPX Echo packets that have been transmitted, on the router port for which the entry exists, during nwIpxEchoIfCrOperationalTIme.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.6
nwIpxEchoIfCtrFilteredPktsmandatory Indicates the total number of IPX Echo packets that have been administratively filtered, on the router port for which the entry exists, during nwIpxEchoIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.7
nwIpxEchoIfCtrDiscardPktsmandatory Indicates the total number of IPX Echo packets that have been discaded, on the router port for which the entry exists, during nwIpxEchoIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.8
nwIpxEchoIfCtrInBytesmandatory Indicates the total number of bytes in the IPX Echo packets that have been recieved, on the router port for which the entry exists, during nwIpxEchoIfCtrOpeationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.9
nwIpxEchoIfCtrOutBytesmandatory Indicates the total number of bytes in the IPX Echo packets that have been transmitted, on the router port for which the entry exists, during nwIpxEchoIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.10
nwIpxEchoIfCtrFilteredBytesmandatory Indicates the total number of bytes in the IPX Echo packets that have been administratively filtered and recieved on the router port for which the entry exists, during nwIpxEchoIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.11
nwIpxEchoIfCtrDiscardBytesmandatory Indicates the total number of bytes in the IPX Echo packets that have been discarded, that were recieved on the router port for which the entry exists, during nwIpxEchoIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.9.3.2.2.1.1.12

This table contains an entry for each event filter configured for
IPX Routing Services events.

nwIpxEventFilterEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1

Each entry describes an event filter which defines a particular type
of event to be logged to the event log. The nwIpxEventProtocol
refers to the instance used in the nwRtgProtocolTable and
nwComponentTable specified by…

Indexes

nwIpxEventFltrProtocol nwIpxEventFltrIfNum

Column	Syntax	OID
nwIpxEventFltrProtocolmandatory Specifies the routing protocol involved in the event for which the event filter exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.1
nwIpxEventFltrIfNummandatory Specifies the router port involved in the event for which the event filter exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.2
nwIpxEventFltrControlmandatory Set this value to 3 to add the event filter to the Event Filter Table. Set this value to 2 to delete the event filter from the Event Filter Table.	Enumerationr/w Enumerated Values: 1 other 2 delete 3 add	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.3
nwIpxEventFltrTypemandatory This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events will be logged. Setting any bit to 0 removes an event type from this field and prevents…	Enumerationr/w Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 error	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.4
nwIpxEventFltrSeveritymandatory This object controls the amount of logging by ignoring events of lower priority than specified by this filter value. The highest value will ignore all events except those of the highest severity. `Highmed' will log all …	Enumerationr/w Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.5
nwIpxEventFltrActionmandatory This field specifies how the events are to be logged. Logging to the `log' stores the events in the event log table. Logging to `trap' sends events out through the trap mechanism.	Enumerationr/w Enumerated Values: 1 log 2 trap 3 log-trap	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.2.1.1.6

This table contains an entry for each event that has been logged.

nwIpxEventEntry row .1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1

Each entry contains the information about an event that has been
logged to the event table.

Indexes

nwIpxEventNumber

Column	Syntax	OID
nwIpxEventNumbermandatory An ordinal value assigned to the event for which the entry exists. nwIpxEventNumber is assigned so that each event in the event log can be uniquely identified by the value of nwIpxEventNumber.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.1
nwIpxEventTimemandatory Indicates the time at which the event was logged to the event log.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.2
nwIpxEventTypemandatory Indicates the type of event that was logged.	Enumeration Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 error	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.3
nwIpxEventSeveritymandatory Indicates the priority that was assigned to this type event.	Enumeration Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.4
nwIpxEventProtocolmandatory Indicates the routing protocol that was involved in this event.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.5
nwIpxEventIfNummandatory Indicates the router port that was involved in the event.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.6
nwIpxEventTextStringmandatory Contains the actual text string that was logged.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.2.2.10.3.1.1.7