CTRON-IP-ROUTER-MIB Table View

This table contains an entry for each router port.
This table is indexed by nwIpFwdIfIndex, which indicates
the value of MIB 2 ifindex which identifies the router 
port for which each entry exists.

nwIpFwdIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1

Each entry specifies the IP Routing Services configuration
for the router port for which the entry exists.

Indexes

nwIpFwdIfIndex

Column	Syntax	OID
nwIpFwdIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.1
nwIpFwdIfAdminStatusmandatory Sets the administrative state of IP Routing Services on the router port for which the entry exists. Enabled (3) causes IP Routing Services to become active. Disabled (2) causes it to become inactive.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.2
nwIpFwdIfOperStatusmandatory Indicates the current operating condition of IP Routing Services on the router port for which the entry exists. The value of nwIpFwdIfOperStatus indicates any problem with the configuration of IP routing Services on the…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.3
nwIpFwdIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpFwdIfOperStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.4
nwIpFwdIfControlmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Enumerationr/w Enumerated Values: 1 other 2 add 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.5
nwIpFwdIfMtumandatory Specifies the Maximum Transmission Unit (MTU) for IP packets on the router port for which the entry exists. This includes the IP header and data, but does not include framing.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.6
nwIpFwdIfForwardingmandatory Controls forwarding of IP packets on the router port for which the entry exists. Enabled (3) causes IP packets to be forwarded. Disabled (2) prevents IP packets from being forwarded.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.7
nwIpFwdIfFrameTypemandatory Specifies the framing type for IP packets forwarded on the router port for which the entry exists.	Enumerationr/w Enumerated Values: 1 other 2 ethernet 3 snap 5 slip 7 localtalk 8 nativewan 9 encapenet 11 encapenetsnap 14 encaptrsnap 16 encapfddisnap 17 canonical	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.8
nwIpFwdIfAclIdentifiermandatory Specifies the Access Control ID of the access control list in effect for the IP packets being routed on the router port for which the entry exists. A value of 0 indicates that no access control list is in effect.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.9
nwIpFwdIfAclStatusmandatory Controls the operation of any access control list configured for IP traffic for the IP packets being routed on the router port for which the entry exists. Enabled (3) applies the access control list, indicated by nwIpFw…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.10
nwIpFwdIfCacheControlmandatory Controls IP Address caching on the router port for which the entry exists. IP Address caching speeds-up the switching process. When IP Addresses caching is enabled, IP Addresses used for address validation, filtering, a…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.11
nwIpFwdIfCacheEntriesmandatory Indicates the number of entries in the IP Address cache on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.12
nwIpFwdIfCacheHitsmandatory Indicates the number of times entries in the IP Address Cache have been used to provide the IP Address required to validate, filter, or forward an IP packet on the router port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.13
nwIpFwdIfCacheMissesmandatory Indicates the number of times the IP Address required to validate, filter, or forward an IP packet on the router port was not found in the IP Address cache.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.1.1.14

This table contains an entry for each IP Address 
assigned to each router port.

nwIpAddrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1

Each entry specifies the IP addressing information for
the logical IP network for which the entry exists.

Indexes

nwIpAddrIfIndex nwIpAddrIfAddress

Column	Syntax	OID
nwIpAddrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.1
nwIpAddrIfAddressmandatory This is the IP Address assigned to the logical IP network for which the entry exist. As multiple IP Addresses may be assigned to a single router port, all addresses assigned to the port must be of the same subnet.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.2
nwIpAddrIfControlmandatory Set this object to add or delete this entry from the table.	Enumerationr/w Enumerated Values: 1 other 2 add 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.3
nwIpAddrIfAddrTypemandatory Specifies whether the IP address, nwIpAddrIfAddress, is the primary, workgroup or secondary IP address for the IP router port for which the entry exists. A primary or workgroup address must be specified before a router …	Enumerationr/w Enumerated Values: 1 other 2 primary 3 secondary 4 workgroup	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.4
nwIpAddrIfMaskmandatory Specifies the Subnet Mask for the logical IP network for which the entry exists.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.5
nwIpAddrIfBcastAddrmandatory Specifies the IP broadcast address type for the logical IP network for which the entry exists. A router port may be configured to send IP broadcasts using the all-ones-based format or the all-zeros-based format. nwIpAdd…	Enumerationr/w Enumerated Values: 1 other 2 zeros 3 ones	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.1.2.1.6

This table contains an entry for each router port configured
and enabled for IP Routing Services.

nwIpFwdIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1

Each entry indicates the packet and byte count of IP
packets on the router port for which the entry exists.

Indexes

nwIpFwdIfCtrIfIndex

Column	Syntax	OID
nwIpFwdIfCtrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.1
nwIpFwdIfCtrAdminStatusmandatory Sets the administrative state of the per-port IP packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become i…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.2
nwIpFwdIfCtrResetmandatory Resets the per-port IP packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwIpFwdIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.3
nwIpFwdIfCtrOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that the per-port IP packet and byte counters have been active on the router port for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.4
nwIpFwdIfCtrInPktsmandatory Indicates the total number of IP packets that have been received, during nwIpFwdIfCtrOperationaltime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.5
nwIpFwdIfCtrOutPktsmandatory Indicates the total number of IP packets that have been transmitted, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.6
nwIpFwdIfCtrFwdPktsmandatory Indicates the total number of IP packets that have been forwarded during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.7
nwIpFwdIfCtrFilteredPktsmandatory Indicates the total number of IP packets that have been administratively filtered, during nwIpFwdIfCtrOperationalTime, on the IP router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.8
nwIpFwdIfCtrDiscardPktsmandatory Indicates the total number of IP packets that have been discarded (dropped), during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.9
nwIpFwdIfCtrAddrErrPktsmandatory Indicates the total number of IP packets that have been discarded, because of addressing errors in the IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.10
nwIpFwdIfCtrLenErrPktsmandatory Indicates the total number of IP packets that have been discarded, because an invalid packet length was contained in the IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.11
nwIpFwdIfCtrHdrErrPktsmandatory Indicates the total number of IP packets that have been discarded, because of an invalid IP header, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.12
nwIpFwdIfCtrInBytesmandatory Indicates the total number of bytes in the IP packets that have been received, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.13
nwIpFwdIfCtrOutBytesmandatory Indicates the total number of bytes in the IP packets that have been transmitted, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.14
nwIpFwdIfCtrFwdBytesmandatory Indicates the total number of bytes in the IP packets that have been forwarded, on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.15
nwIpFwdIfCtrFilteredBytesmandatory Indicates the total number of bytes in the IP packets that have been administratively filtered, during nwIpFwdIfCtrOperationalTime, on the IP router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.16
nwIpFwdIfCtrDiscardBytesmandatory Indicates the total number of bytes in the IP packets that have been discarded, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.17
nwIpFwdIfCtrHostInPktsmandatory Indicates the total number of IP packets that have been successfully delivered to the local host, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.18
nwIpFwdIfCtrHostOutPktsmandatory Indicates the total number of IP packets that have been transmitted by the local host, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.19
nwIpFwdIfCtrHostDiscardPktsmandatory Indicates the total number of IP packets discarded by the local host due to a lack of host resources, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.20
nwIpFwdIfCtrHostInBytesmandatory Indicates the total number of bytes in the IP packets that have been successfully delivered to the local host, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.21
nwIpFwdIfCtrHostOutBytesmandatory Indicates the total number of bytes in the IP packets that have been transmitted by the local host, during nwIpFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.22
nwIpFwdIfCtrHostDiscardBytesmandatory Indicates the total number of bytes in the IP packets that have been discarded by the local host due to a lack of host resources, that were received on the router port for which the entry exists, during nwIpFwdIfCtrOper…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.2.2.2.1.1.23

This table contains an entry for each router port. Each
entry can contain different values, allowing the routing
protocol configuration to vary from router port to router
port. This table is indexed by nwIpRipIfIndex, which 
indicates the value of MIB 2 ifindex, which identifies the
router port for which the entry exists.

nwIpRipIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1

Each entry contains the RIP routing protocol configuration
for the router port for which the entry exists.

Indexes

nwIpRipIfIndex

Column	Syntax	OID
nwIpRipIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.1
nwIpRipIfAdminStatusmandatory Sets the administrative state of the RIP routing protocol on the router port for which the entry exists. Enabled (3) causes RIP to become active on the router port. Disabled (2) causes RIP to become inactive on the rout…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.2
nwIpRipIfOperStatusmandatory Indicates the current operating condition of the RIP routing protocol on the router port for which the entry exists. The value of nwIpRipIfOperStatus indicates any problem with your RIP configuration on the router port.…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.3
nwIpRipIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, nwIpRipIfOperStatus, has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.4
nwIpRipIfVersionmandatory Indicates the revision level of the RIP routing protocol firmware on the router port for which the entry exists, in textual format.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.5
nwIpRipIfAdvertisementmandatory Sets the interval, in seconds, at which RIP advertises the RIP route table on the router port for which the entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.6
nwIpRipIfFloodDelaymandatory Sets the length of time, in seconds, that the RIP routing protocol should wait after discovering that a directly connected route has gone down, before flooding updates (triggered updates) on the router port for which th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.7
nwIpRipIfRequestDelaymandatory Sets the length of time, in hundredths of a second, that the RIP routing protocol should wait after receiving a route request packet, before sending a response on the router port for which the entry exists. A value of…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.8
nwIpRipIfPrioritymandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.9
nwIpRipIfHelloTimermandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interfaced to all the Cabletron Routing Services protocol-specific MIBs. Se…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.10
nwIpRipIfSplitHorizonmandatory Sets the operating condition of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, the RIP routing protocol keeps track of which router port route information is received on, and…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.11
nwIpRipIfPoisonReversemandatory Sets the operating condition of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, the RIP routing protocol advertises any downed route as unreachable during the period of tim…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.12
nwIpRipIfSnoopingmandatory Controls the operation of RIP Snooping on the router port. When RIP Snooping is enabled the RIP routing protocol operates in passive mode so that it receives route information, builds and maintains a route table, but do…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.13
nwIpRipIfTypemandatory Indicates whether the directly connected network segment does or does not support broadcast media access. If broadcast media access is supported, RIP advertisements are sent out one broadcast packet per router port. If …	Enumeration Enumerated Values: 1 other 2 bma 3 nbma	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.14
nwIpRipIfXmitCostmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting t…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.15
nwIpRipIfAclIdentifiermandatory Specifies the Access Control ID of the access control list in effect for RIP routing protocol packets on the router port for which the entry exists. A value of 0 indicates that there is no access control list in effect…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.16
nwIpRipIfAclStatusmandatory Controls the operation of the access control list identified by nwIpRipIfAclIdentifier. Enabled (3) applies the access control list to all RIP routing protocol packet traffic on the router port for which the entry exis…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.1.1.1.17

This table contains an entry for each router port.This table
is indexed by nwIpRipIfCtrIfIndex which indicates the value
of MIB 2 ifindex, which identifies the router port for which
the entry exists.

nwIpRipIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1

Each entry indicates the current packet and byte count of
RIP routing protocol packets on the router port for which
the entry exists.

Indexes

nwIpRipIfCtrIfIndex

Column	Syntax	OID
nwIpRipIfCtrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.1
nwIpRipIfCtrAdminStatusmandatory Sets the administrative state of the RIP packet and byte counters on the router port for which this entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to become inactiv…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.2
nwIpRipIfCtrResetmandatory Resets the per-port RIP packet and byte counters on the router port for which this entry exists. Reset (2) resets the counters to 0. nwIpRipIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.3
nwIpRipIfCtrOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpRipIfCtrAdminStatus has been in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.4
nwIpRipIfCtrInPktsmandatory Indicates the total number of RIP routing protocol packets that have been received, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.5
nwIpRipIfCtrOutPktsmandatory Indicates the total number of RIP packets that have been transmitted, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.6
nwIpRipIfCtrFilteredPktsmandatory Indicates the total number of RIP packets that have been administratively filtered during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.7
nwIpRipIfCtrDiscardPktsmandatory Indicates the total number of RIP routing protocol packets that have been discarded, during nwIpRipIfCtrOperationalTime. that were received through the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.8
nwIpRipIfCtrInBytesmandatory Indicates the total number of bytes in the RIP routing protocol packets that have been received, during nwIpRipIfCtrOperationalTime, on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.9
nwIpRipIfCtrOutBytesmandatory Indicates the total number of bytes in the RIP routing protocol packets that have been transmitted, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.10
nwIpRipIfCtrFilteredBytesmandatory Indicates the total number of bytes in the RIP routing protocol packets that have been administratively filtered, during nwIpRipIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.11
nwIpRipIfCtrDiscardBytesmandatory Indicates the total number of bytes in the RIP routing protocol packets that have been discarded during nwIpRipIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.2.2.1.1.12

This table contains the RIP route table. This table contains
an entry for each route learned through the RIP routing
protocol. Only the best routes from this table are added to
the IP forwarding table to be used for packet switching.

nwIpRipRouteEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1

Each entry describes the RIP route to the destination
network for which the entry exists.

Indexes

nwIpRipRtNetId nwIpRipRtIfIndex nwIpRipRtSrcNode

Column	Syntax	OID
nwIpRipRtNetIdmandatory This is the primary index into the RIP route table. This number indicates the IP Address of the destination for which the entry exists.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.1
nwIpRipRtIfIndexmandatory This is a secondary index into IP-RIP route table. This number corresponds to the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.2
nwIpRipRtSrcNodemandatory This is a secondary index into the RIP route table. This number indicates the IP Address of the source router from which this route was learned. A value of 0.0.0.0 indicates that the source is on the network segment dir…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.3
nwIpRipRtMaskmandatory Indicates the Subnet Mask of the IP Address for which the entry exists.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.4
nwIpRipRtHopsmandatory Indicates the number of hops required to reach the destination for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.5
nwIpRipRtAgemandatory Indicates the amount of time, in seconds, since an update has been received for the route for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.6
nwIpRipRtTypemandatory Indicates whether the destination network is directly connected through the router port specified by nwIpRipRtIfIndex, or is indirectly connected through another router, specified by nwIpRipRtSrcNode.	Enumeration Enumerated Values: 1 other 2 invalid 3 direct 4 remote 5 static 6 ospf	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.7
nwIpRipRtFlagsmandatory Specifies properties of the RIP route. The bit mask is as follows: source-changed (1), best-source (2), local net (4), net-down (8), update-fib-only (16).	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.1.1.3.1.1.8

This table contains the OSPF configuration information for
each IP router port

nwIpOspfIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1

Each entry specifies the OSPF configuration information
for the IP router port for which the entry exists.

Indexes

nwIpOspfIfIndex

Column	Syntax	OID
nwIpOspfIfIndexmandatory This is the primary index into the OSPF interface table. This number corresponds to the index into the MIB-2 Interface Table which describes the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.1
nwIpOspfIfAdminStatusmandatory Sets the administrative state of OSPF on the IP router port for which the entry exists. enabled(3) causes OSPF to become active on the router port. disabled(2) causes OSPF to become inactive on the router port.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.2
nwIpOspfIfOperStatusmandatory Sets the administrative state of OSPF on the IP router port for which the entry exists. enabled(3) causes OSPF to become active on the router port. disabled(2) causes OSPF to become inactive on the router port.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.3
nwIpOspfIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpOspfIfAdminStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.4
nwIpOspfIfVersionmandatory Indicates the OSPF protocol revision level supported on the router port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.5
nwIpOspfIfSnoopingmandatory Controls the operation of OSPF Snooping on the IP router port for which the entry exists.OSPF Snooping is operating OSPF in passive mode, so it receives route information, builds and maintains a route information table,…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.6
nwIpOspfIfTypemandatory Specifies whether the attached network segment does or does not support broadcast media access. bma (2) indicates that route advertisements can be sent as broadcasts. nbma (3) indicates that route advertisements must be…	Enumeration Enumerated Values: 1 other 2 bma 3 nbma	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.7
nwIpOspfIfAclIdentifiermandatory Specifies the Access Control List ID of the access control list applied to OSPF traffic on the IP router port for which the entry exists. A value of 0 indicates that no Access List applies.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.8
nwIpOspfIfAclStatusmandatory Controls the operation of the access list configured for OSPF traffic on the IP router port for which the entry exists. enabled(3) causes the access list to be applied. disabled(2) causes the access list not to be appli…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.1.1.1.9

This table contains the OSPF packet and byte counter for
each configured OSPF router port.

nwIpOspfIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1

Each entry specifies the OSPF packet and byte counter for
for the router for which the entry exists.

Indexes

nwIpOspfIfCtrIfIndex

Column	Syntax	OID
nwIpOspfIfCtrIfIndexmandatory This is the primary index into the OSPF interface counter table. This number corresponds to the index into the MIB-2 Interface Table which describes the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.1
nwIpOspfIfCtrAdminStatusmandatory Sets the administrative state of the OSPF packet and byte counters on the IP router port for which the entry exists. enabled(3) causes these counters to become active on the router port. disabled(2) turns these counters…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.2
nwIpOspfIfCtrResetmandatory Resets the OSPF packet and byte counters on the router port for which the entry exists. reset (2) resets the interface-specific counters to 0 and nwIpOspfIfCtrOperationalTime to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.3
nwIpOspfIfCtrOperationalTimemandatory Indicates the amount of time (# of time ticks) that the interface-specific OSPF packet and byte counters have been active on the router port for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.4
nwIpOspfIfCtrInPktsmandatory Indicates the total number of OSPF packets that have been received, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.5
nwIpOspfIfCtrOutPktsmandatory Indicates the total number of OSPF packets that have been transmitted, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.6
nwIpOspfIfCtrFilteredPktsmandatory Indicates the total number of OSPF packets that have been administratively filtered, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.7
nwIpOspfIfCtrDiscardPktsmandatory Indicates the total number of OSPF packets that have been discarded, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.8
nwIpOspfIfCtrInBytesmandatory Indicates the total number of bytes in the OSPF packets that have been received, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.9
nwIpOspfIfCtrOutBytesmandatory Indicates the total number of bytes in the OSPF packets that have been transmitted, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.10
nwIpOspfIfCtrFilteredBytesmandatory Indicates the total number of bytes in the OSPF packets that have been administratively filtered, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.11
nwIpOspfIfCtrDiscardBytesmandatory Indicates the total number of bytes in the OSPF packets that have been discarded, on the router port for which the entry exists, during nwIpOspfIfCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.4.2.1.2.2.1.1.12

A table of statically configured entries in the Cabletron IP OSPF 
FIB.

nwIpOspfStaticEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1

A list of information for each static entry in the Cabletron
IP OSPF FIB.

Indexes

nwIpOspfStaticDest nwIpOspfStaticForwardMask nwIpOspfStaticNextHop

Column	Syntax	OID
nwIpOspfStaticDestmandatory The network Address of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.1
nwIpOspfStaticForwardMaskmandatory The network mask of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.2
nwIpOspfStaticNextHopmandatory The next hop address of a static route leaked from the IP FIB into the Cabletron IP OSPF FIB. A value of 0.0.0.0 indicates that packets for the external destination should be forwarded to the advertising router.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.3
nwIpOspfStaticMetricmandatory The Cabletron IP OSPF advertised cost of reaching the leaked static route.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.4
nwIpOspfStaticMetricTypemandatory The Cabletron IP OSPF metric type to be advertised using OSPF: Autonomous System External type 1 (1) or Autonomous System External type 2 (2).	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.5
nwIpOspfStaticStatusmandatory By setting this OID to inactive for a particular static route, the static route will be added to the IP OSPF FIB but not advertised. Setting this OID to active for a particular static route, the static route will be …	Enumerationr/w Enumerated Values: 1 inactive 2 active 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.5.2.2.1.1.6

This table contains the control information for maintaining
a cache of IP host addresses on each router port. Note that
the of actual entries are maintained by the IP Address
Translation Table (Net-to-Media) of MIB 2.

nwIpHostCtlEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1

Each entry contains the control information for
maintaining the cache on each router port.

Indexes

nwIpHostCtlIfIndex

Column	Syntax	OID
nwIpHostCtlIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.1
nwIpHostCtlAdminStatusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol specific MIBS. Setting th…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.2
nwIpHostCtlOperStatusmandatory Indicates the current operating condition of the IP Host Address cache on the router port for which the entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.3
nwIpHostCtlOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwIpHostCtlOperStatus has been in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.4
nwIpHostCtlProtocolmandatory Controls the operation of the ARP protocol on the router port for which the entry exists.	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.5
nwIpHostCtlSnoopingmandatory Controls ARP Snooping on the router port for which the entry exists. Given the ARP protocol is enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlIfSnooping to enabled (3) turns on ARP Snooping. When ARP Snooping is en…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.6
nwIpHostCtlProxymandatory Controls the operations of Proxy ARP on the router port for which the entry exists. Given the ARP protocol is enabled, nwIpHostCtlProtocol=3, setting nwIpHostCtlProxy to enabled (3) turns on Proxy ARP. When Proxy ARP i…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.7
nwIpHostCtlCacheMaxmandatory Indicates the maximum number of entry slots the cache can consist of. nwIpHostCtlCacheMax cannot be set to less than 16. Setting this value does not allocate any memory for the cache.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.8
nwIpHostCtlCacheSizemandatory Indicates the current number of entry slots in the cache. The cache automatically resizes to accommodate all entries up to the maximum number of entries set by nwIpHostCtlCacheMax.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.9
nwIpHostCtlNumStaticsmandatory Indicates the total number of static entries in the cache on the router port for which the entry exists. Static entries remain in the cache until they are administratively removed.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.10
nwIpHostCtlNumDynamicsmandatory Indicates the number of dynamic entries in the cache on the router port for which the entry exists. Dynamic entries area added and aged out by the ARP protocol.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.11
nwIpHostCtlCacheHitsmandatory Indicates the number of times an entry in the cache has been used to successfully provide the physical address required to forward an IP packet on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.12
nwIpHostCtlCacheMissesmandatory Indicates the number of times the physical address required to forward an IP packet has not been found in the cache on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.2.1.1.13

The Ip Address translation table used for mapping an IP
address to physical address, framing, port and circuit
identifier, if applicable.

nwIpHostMapEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1

Each entry contains one IpAddress to 'physical'
address equivalence, including a circuit identifier
if applicable. Also provided is the framing and
port number required to converse with this host.

Indexes

nwIpHostMapIfIndex nwIpHostMapIpAddr

Column	Syntax	OID
nwIpHostMapIfIndexmandatory This is the primary (major) index into the HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the IP router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.1
nwIpHostMapIpAddrmandatory The IpAddress corresponding to the media-dependent 'physical' address and circuit identifier (if applic).	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.2
nwIpHostMapPhysAddrmandatory The media-dependent 'physical' address. The value of this object is 0 for entries indicating native-wan(8) framing.	RFC1213-MIBPhysAddressr/w	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.3
nwIpHostMapTypemandatory Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwIpHostMapTable. That is, it effectively dissasociates the circuit identified with said entry from the mapping …	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 dynamic 4 static 5 inactive	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.4
nwIpHostMapCircuitIDmandatory The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the IP Address at the end of the circuit. For non-WAN interfaces, the value of th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.5
nwIpHostMapFramingmandatory Specifies the framing type required to converse with the host for which this entry exists.	Enumerationr/w Enumerated Values: 1 other 2 ethernet 3 snap 5 slip 7 localtalk 8 nativewan 9 encapenet 11 encapenetsnap 14 encaptrsnap 16 encapfddisnap 17 canonical	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.6
nwIpHostMapPortNumbermandatory The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of interfaces in the system and the number of circuits present on interfaces which are …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.6.3.1.1.7

This table contains the access control list information
for IP traffic. This table contains entries, each of which
allows packet forwarding between source/destination pairs to
be permitted or denied. The list is identified by the Access
Control List ID. Each list may contain multiple entries 
ordered by sequence number. When an access control list is
searched, it is searched in sequence number order and the 
first match found ends the search. If no match is found, 
access defaults to permitted.

nwIpAclEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1

Each entry contains IP source/destination access information.

Indexes

nwIpAclIdentifier nwIpAclSequence

Column	Syntax	OID
nwIpAclIdentifiermandatory This is the primary (major) index into the IP access control list table. This value identifies the access control list by a unique identifier arbitrarily assigned by the user. All entries that have the same value for nw…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.1
nwIpAclSequencemandatory This is the secondary (minor) index into the IP access control list table. This number corresponds to a sequence number used to order multiple entries within the same access control list.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.2
nwIpAclPermissionmandatory Specifies whether access is allowed or denied between the source and destination address pair. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry se…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permit 4 deny 5 permit-bidirectional 6 deny-bidirectional	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.3
nwIpAclMatchesmandatory Indicates the number of matches on this entry that have resulted in the permit/deny access restriction being applied as part of the forwarding process.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.4
nwIpAclDestAddressmandatory Specifies the destination IP address used to compare for matches on the access control list.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.5
nwIpAclDestMaskmandatory Specifies the mask to be applied to the destination address to determine the portion of the address used to compare for matches on the access control list. Only bits that are matching are used in the comparison. This a…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.6
nwIpAclSrcAddressmandatory Specifies the source address used to compare for matches on the access control list.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.7
nwIpAclSrcMaskmandatory Specifies the mask to be applied to the source address to determine the portion of the address to be used to compare for matches on the access control list. Only bits that are matching are used in the comparison. This a…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.8
nwIpAclProtocolmandatory Specifies the IP protocols checked to compare for matches on the access control list.	Enumerationr/w Enumerated Values: 1 other 2 all 3 icmp 4 udp 5 tcp	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.9
nwIpAclPortNumbermandatory Specifies the port number used to compare for matches on the access control list. nwIpAclPortNumber only applies if nwIpAclProtocol is equal to 4 or 5, UDP or TCP nwIpAclPortNumber ranges from 0 to 65536. The value 0 i…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.7.2.1.10

This table contains an entry for each UDP port configured
for UDP broadcast redirection.

nwIpRedirectEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1

Each entry contains the UDP port number of and IP Address
to which UDP packets received as LAN broadcasts, should be
redirected.

Indexes

nwIpRedirectPort

Column	Syntax	OID
nwIpRedirectPortmandatory This is the primary index into the UDP redirector table, identifying the UDP port number of the packets that will be redirected.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.1
nwIpRedirectAddressmandatory Sets the IP address to which the UDP broadcast packets matching the UDP redirect port value (nwIpRedirectPort) will be forwarded.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.2
nwIpRedirectTypemandatory Set this object to enable or disable the redirector feature for the UDP port specified by nwIpRedirectAddress.	Enumerationr/w Enumerated Values: 1 forward 2 delete	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.3
nwIpRedirectCountmandatory Indicates how many UDP broadcast packets have been redirected, as specified by this entry.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.9.1.1.1.4

This table contains an entry for each event filter
configured for IP Routing Services events.

nwIpEventFilterEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1

Each entry describes an event filter which defines
a particular type of event to be logged to the event log.
The value of nwIpEventProtocol indicates the value used
in either the nwRtgProtocolTable or the nwComponentTa…

Indexes

nwIpEventFltrProtocol nwIpEventFltrIfNum

Column	Syntax	OID
nwIpEventFltrProtocolmandatory Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentRtgInstance which identifies the protocol involved in the event for which the event filter exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.1
nwIpEventFltrIfNummandatory Specifies the router port involved in the event for which the event filter exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.2
nwIpEventFltrControlmandatory Set this value to 3 to add the entry to the event filter table. Set this value to 2 to remove the entry from the event filter table.	Enumerationr/w Enumerated Values: 1 other 2 delete 3 add	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.3
nwIpEventFltrTypemandatory This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events are to be logged. Setting any bit to 0 removes an event type from this field and preve…	Enumerationr/w Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 diags 64 error	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.4
nwIpEventFltrSeveritymandatory Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than specified by this filter value. `Highmed' ignores only events of…	Enumerationr/w Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.5
nwIpEventFltrActionmandatory Specifies how the events are to be logged. Logging to the `log' stores the events in the event log table (nwIpEventFltrAction). Logging to `trap' sends events out through the trap mechanism.	Enumerationr/w Enumerated Values: 1 log 2 trap 3 log-trap	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.2.1.1.6

This table contains an entry for each event that has
been logged.

nwIpEventEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1

Each entry contains the information about an event
that has been logged to the event table.

Indexes

nwIpEventNumber

Column	Syntax	OID
nwIpEventNumbermandatory An ordinal value assigned to the event for which the log entry exists. nwIpEventNumber is assigned so that each event in the event log can be uniquely identified by the value of nwIpEventNumber.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.1
nwIpEventTimemandatory Indicates the time at which the event was logged to the event log.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.2
nwIpEventTypemandatory Indicates the type of event that was logged.	Enumeration Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 diags 64 error	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.3
nwIpEventSeveritymandatory Indicates the severity that was assigned to the event.	Enumeration Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.4
nwIpEventProtocolmandatory Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentInstance which indentifies the protocol or component that was involved in the event.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.5
nwIpEventIfNummandatory Indicates the router port that was involved in the event.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.6
nwIpEventTextStringmandatory Contains the actual text string that was logged.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.10.3.1.1.7

This table has an entry for each workgroup subnet definition.
It is indexed by and arbitrary integer indentifier.

nwIpWgDefEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1

Each entry specifies the configuration and status of an
individual work group.

Indexes

nwIpWgDefIdentifier

Column	Syntax	OID
nwIpWgDefIdentifiermandatory An index into the definition table, unique to each entry, arbitrarily assigned by the user.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.1
nwIpWgDefHostAddressmandatory The IP address of the IP router host which applies to every interface included in the workgroup.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.2
nwIpWgDefSubnetMaskmandatory The subnet mask for the IP address above, thereby defining the subnet which applies to every interface included in the workgroup.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.3
nwIpWgDefSecuritymandatory A security level which applies to this workgroup as a whole. Security applies in conjunction with the range table below, which locks hosts to interfaces and/or physical address. Packets are filtered out if security is v…	Enumerationr/w Enumerated Values: 1 none 2 low 3 medium 4 high	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.4
nwIpWgDefFastPathmandatory Enabled (3) provides a fast path for packets through the router when both source and destination are within this workgroup - done mostly by skipping IP header validation.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.5
nwIpWgDefRowStatusmandatory This status instance does not support `createAndGo.' A row entry should be created by a set of `createAndWait' which brings the status to `notReady.' The missing row info may then be supplied by setting nwIpWgDefHostAdd…	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.6
nwIpWgDefOperStatusmandatory The operational status of this workgroup definition entry. It will be `disabled' if this entry's row status is not active. It will be `subnetConflict' if there is a conflict with an existing active entry in this workgro…	Enumeration Enumerated Values: 1 ok 2 disabled 3 subnetConflict 4 internalError	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.7
nwIpWgDefNumActiveIntfmandatory The number of interfaces (ports) in this workgroup which have an operational status nwIpWgIfOperStatus of `OK' in the IP Work Group Interface table below.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.8
nwIpWgDefNumTotalIntfmandatory The number of interfaces (ports) in this workgroup which have an administrative status nwIpWgIfRowStatus of `active' in the IP Work Group Interface table below.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.1.1.9

This table contains an entry for each port in a workgroup.
It is indexed by the workgroup identifier and the MIB-II 
interface indentifier.

nwIpWgIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1

Each entry specifies the association of a router port to
a defined workgroup.

Indexes

nwIpWgIfDefIdent nwIpWgIfIfIndex

Column	Syntax	OID
nwIpWgIfDefIdentmandatory The workgroup identifier. This is the primary index into the IP Work Group Interface Table, matching the index into the Definition Table above.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.1
nwIpWgIfIfIndexmandatory The interface number. This is the secondary index into the IP Work Group Interface Table, matching the primary index into the MIB-2 IfTable which describes the router port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.2
nwIpWgIfNumActiveHostsmandatory The number of hosts known to be active on this interface in this workgroup. These hosts are visible in the IP Work Group Host Table below. Hosts age out and become inactive in approximately 10 minutes if not rediscovere…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.3
nwIpWgIfNumKnownHostsmandatory The number of hosts seen on this interface in this workgroup since this interface entry was last activated.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.4
nwIpWgIfRowStatusmandatory This status instance supports `createAndGo' semantics to create an active entry.	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.5
nwIpWgIfOperStatusmandatory The operational status of this interface (port) entry. It will be `disabled' if this entry's row status is not active. It will be `workgroupInvalid' if either there is no workgroup defined for this entry's nwIpWgIfDefI…	Enumeration Enumerated Values: 1 ok 2 disabled 3 workgroupInvalid 4 addressConflict 5 resetRequired 6 linkDown 7 routingDown 8 internalError	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.2.1.6

This table locks ranges of IP hosts (addresses) to ports.
Entries in this table represent explicit permissions. The
host(s) represented by a range entry may exchange packets
with this router if it (they) match the port specified in the
entry. Optionally physical address may be locked as well.
          
This table functions in concert with the workgroup security
level as defined in the IP Work Group Definition Table entry.
For hosts not entered in this table the default for a low
security workgroup is to permit packet exchange, whereas the
default for medium and high security is to deny packet
exchange.

nwIpWgRngEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1

Each entry configures a range of host IP addresses to be
associated with a given interface ( port ). If the range
consists of a single host address the entry may optionally
specify a physical address. The entry is index…

Indexes

nwIpWgRngBegHostAddr nwIpWgRngEndHostAddr nwIpWgRngIfIndex

Column	Syntax	OID
nwIpWgRngBegHostAddrmandatory The beginning (lower) IP address of the address range. This is the primary index into the IP Work Group Range Table.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.1
nwIpWgRngEndHostAddrmandatory The ending (higher) IP address of the address range. This is the secondary index of the IP Work Group Range Table.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.2
nwIpWgRngIfIndexmandatory The interface number. This is the tertiary index into the IP Work Group Interface Table, matching the primary index into the MIB-2 IfTable which describes the router port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.3
nwIpWgRngPhysAddrmandatory The physical address of the host with the IP address given in the nwIpWgRngBegHostAddr for this conceptual row entry. Only single host range entry in which nwIpWgRngEndHostAddr is the same as nwIpWgRngBegHostAddr may se…	OctetStringr/w	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.4
nwIpWgRngRowStatusmandatory This status instance supports `createAndGo' semantics to create an active entry.	Enumerationr/w Enumerated Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.5
nwIpWgRngOperStatusmandatory The operational status of this range table entry. It will be `disabled' if this entry's row status is not active. It will be `workgroupInvalid' if either there is no workgroup or if the operational status for the workg…	Enumeration Enumerated Values: 1 ok 2 disabled 3 workgroupInvalid 4 interfaceInvalid 5 physAddrRequired 6 internalError	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.3.1.6

A read only status table for hosts in workgroups.
It has the information similar to a net-to-media table.

nwIpWgHostEntry row .1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1

Each entry shows a workgroup host. Entry is indexed by
IP address and interface (port). It gives the workgroup
and the physical address found for the host.

Indexes

nwIpWgHostHostAddr nwIpWgHostIfIndex

Column	Syntax	OID
nwIpWgHostHostAddrmandatory The host IP address. This is the primary index to the IP Work Group Host Table.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.1
nwIpWgHostIfIndexmandatory The interface (port) number. This is the secondary index to the IP Work Group Host Table, matching the primary index to the MIB-2 IfTable which describes the router port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.2
nwIpWgHostDefIdentmandatory The workgroup identifier. This corresponds to the primary index into the IP Work Group Interface Table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.3
nwIpWgHostPhysAddrmandatory The physical address of the host with the IP address given in the nwIpWgHostHostAddr for this conceptual row entry.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.4
nwIpWgHostStatusmandatory This status of the host with respect to the workgroup. The host may be `unknown' if ARP has not discovered on which port it resides. The status of `invalid-multiple' means the same host IP …	Enumeration Enumerated Values: 1 other 2 unknown 3 valid 4 invalid-multiple 5 invalid-physaddr 6 invalid-range 7 invalid-interface 8 invalid-workgroup 9 invalid-expired	.1.3.6.1.4.1.52.4.2.2.2.3.1.2.11.4.1.5