CTRON-DECIV-ROUTER-MIB Table View

This table contains an entry for each router port. This table is
indexed by nwDecIVFwdIfIndex, which indicates the value of MIB 2
ifIndex, which identifies the router port for which each entry exists.

nwDecIVFwdIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1

Each entry specifies the DECnet Phase IV Routing Services
configuration for the router port for which the entry exists.

Indexes

nwDecIVFwdIfIndex

Column	Syntax	OID
nwDecIVFwdIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.1
nwDecIVFwdIfAdminStatusmandatory Sets the administrative state of DECnet Phase IV Routing Services on the router port for which the entry exists. Enabled (3) causes DECnet Phase IV Routing Services to become active. Disabled (2) causes it to become ina…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.2
nwDecIVFwdIfOperStatusmandatory Indicates the current operating condition of DECnet Phase IV Routing Services on the router port for which the entry exists. The value of nwDecIVFwdIfOperStatus indicates any problem with the configuration of DECnet Pha…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable 6 invalid-config	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.3
nwDecIVFwdIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwDecIVFwdIfOperStatus has been in its current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.4
nwDecIVFwdIfControlmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Enumerationr/w Enumerated Values: 1 other 2 add 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.5
nwDecIVFwdIfMtumandatory Specifies the Maximum Transmission Unit (MTU) for DECnet packets on the router port for which the entry exists. This includes the DECnet header and data, but does not include framing.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.6
nwDecIVFwdIfForwardingmandatory Controls the forwarding of DECnet packets on the router port for which the entry exists. Enabled (3) causes DECnet packets to be forwarded. Disabled (2) prevents DECnet packets from being forwarded.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.7
nwDecIVFwdIfFrameTypemandatory Specifies the framing type for DECnet packets forwarded on the router port for which the entry exists. Some frame types are only valid for specific media types. The comments reflect those valid media types.	Enumerationr/w Enumerated Values: 1 other 2 ethernet 3 snap 8 nativewan 9 encapenet 11 encapenetsnap 14 encaptrsnap 16 encapfddisnap 17 canonical	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.8
nwDecIVFwdIfAclIdentifiermandatory Specifies the Access Control ID of the access control list in effect for DECnet packets being routed on the router port for which the entry exists. A value of 0 indicates that no access control list is in effect.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.9
nwDecIVFwdIfAclStatusmandatory Controls the operation of any access control list configured for DECnet traffic on the router port for which the entry exists. Enabled (3) applies the access control list indicated by the value of nwDecIVFwdIfAclIdentif…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.10
nwDecIVFwdIfCacheControlmandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.11
nwDecIVFwdIfCacheEntriesmandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.12
nwDecIVFwdIfCacheHitsmandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.13
nwDecIVFwdIfCacheMissesmandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.1.1.1.14

This table contains an entry for each router port configured and
enabled for DECnet Phase IV Routing Services.

nwDecIVFwdIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1

Each entry indicates the current packet and byte count of DECnet
packets on each router port for which the entry exists.

Indexes

nwDecIVFwdIfCtrIfIndex

Column	Syntax	OID
nwDecIVFwdIfCtrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.1
nwDecIVFwdIfCtrAdminStatusmandatory Sets the administrative state of the per-port DECnet packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become active. Disabled (2) causes these counters to beco…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.2
nwDecIVFwdIfCtrResetmandatory Resets the per-port DECnet packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwDecIVFwdIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.3
nwDecIVFwdIfCtrOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that the per-port DECnet packet and byte counters have been active on the router port for which the entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.4
nwDecIVFwdIfCtrInPktsmandatory Indicates the total number of DECnet packets that have been received, during nwDecIVFwdIfCtrOperationaltime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.5
nwDecIVFwdIfCtrOutPktsmandatory Indicates the total number of DECnet packets that have been transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.6
nwDecIVFwdIfCtrFwdPktsmandatory Indicates the total number of DECnet packets that have been forwarded on the router port for which the entry exists, during nwDecIVFwdCtrOperationalTime.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.7
nwDecIVFwdIfCtrFilteredPktsmandatory Indicates the total number of DECnet packets that have been administratively filtered, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.8
nwDecIVFwdIfCtrDiscardPktsmandatory Indicates the total number of DECnet packets that have been discarded (dropped), during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.9
nwDecIVFwdIfCtrAddrErrPktsmandatory Indicates the total number of DECnet packets that have been discarded because of addressing errors in the DECnet header, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.10
nwDecIVFwdIfCtrLenErrPktsmandatory Indicates the total number of DECnet packets that have been discarded because an invalid packet length was contained in the DECnet header, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry ex…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.11
nwDecIVFwdIfCtrHdrErrPktsmandatory Indicates the total number of DECnet packets that have been discarded because of an invalid DECnet header, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.12
nwDecIVFwdIfCtrInBytesmandatory Indicates the total number of bytes in the DECnet packets that have been received, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.13
nwDecIVFwdIfCtrOutBytesmandatory Indicates the total number of bytes in the DECnet packets that have been transmitted, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.14
nwDecIVFwdIfCtrFwdBytesmandatory Indicates the total number of bytes in the DECnet packets that have been forwarded, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.15
nwDecIVFwdIfCtrFilteredBytesmandatory Indicates the total number of bytes in the DECnet packets that have been administratively filtered, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.16
nwDecIVFwdIfCtrDiscardBytesmandatory Indicates the total number of bytes in the DECnet packets that have been discarded, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.17
nwDecIVFwdIfCtrHostInPktsmandatory Indicates the total number of DECnet packets that have been delivered to the local host, during nwDecIVFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.18
nwDecIVFwdIfCtrHostOutPktsmandatory Indicates the total number of DECnet packets that have been transmitted by the local host, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.19
nwDecIVFwdIfCtrHostDiscardPktsmandatory Indicates the total number of DECnet packets that have been discarded by the local host, during nwDecIVFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.20
nwDecIVFwdIfCtrHostInBytesmandatory Indicates the total number of bytes in the DECnet packets that have been delivered to the local host, during nwDecIVFwdIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.21
nwDecIVFwdIfCtrHostOutBytesmandatory Indicates the total number of bytes in the DECnet packets that have been transmitted by the local host, during nwDecIVFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.22
nwDecIVFwdIfCtrHostDiscardBytesmandatory Indicates the total number of bytes in the DECnet packets that have been discarded by the local host, due to a lack of host resources, that were received on the router port for which the entry exists, during nwDecIVFwdI…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.2.2.2.1.1.23

This table contains an entry for each router port. Each entry can
contain different values, allowing the routing protocol configuration
to vary from router port to router port. This table is indexed by
nwDecIVProtoIfIndex, which indicates the value of MIB 2 ifIndex,
which identifies the router port for which each entry exists.

nwDecIVProtoIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1

Each entry contains the DECnet Phase IV distance-vector-based
routing protocol configuration for the router port for which the
entry exists.

Indexes

nwDecIVProtoIfIndex

Column	Syntax	OID
nwDecIVProtoIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.1
nwDecIVProtoIfAdminStatusmandatory Sets the administrative state of the DECnet Phase IV distance-vector-based routing protocol on the router port for which the entry exists. Enabled (3) causes the routing protocol to become active on the router port. Dis…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.2
nwDecIVProtoIfOperStatusmandatory Indicates the current operating condition of the DECnet Phase IV distance-vector-based routing protocol on the router port for which the entry exists. The value of nwDecIVProtoIfOperStatus indicates any problem with you…	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pending-disable 5 pending-enable	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.3
nwDecIVProtoIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwDecIVProtoIfOperStatus has been in it`s current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.4
nwDecIVProtoIfVersionmandatory Indicates the revision level of the DECnet Phase IV distance-vector-based routing protocol firmware on the router port for which the entry exists, in textual format.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.5
nwDecIVProtoIfAdvertisementmandatory Sets the interval, in seconds, at which the DECnet Phase IV distance-vectorbased routing protocol advertises its route table on the router port for which the entry exists. Change this value to cause the DECnet Phase IV …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.6
nwDecIVProtoIfFloodDelaymandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.7
nwDecIVProtoIfRequestDelaymandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.8
nwDecIVProtoIfPrioritymandatory Sets the priority of the DECnet Phase IV distance-vector-based routing protocol on the router port for which the entry exists. Within an area, the router with the highest value for nwDecIVProtoIfPriority becomes the pri…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.9
nwDecIVProtoIfHelloTimermandatory Sets the interval, in seconds, at which DECnet Phase IV distance-vector-based routing protocol sends Hello packets on the router port for which the entry exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.10
nwDecIVProtoIfSplitHorizonmandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.11
nwDecIVProtoIfPoisonReversemandatory This object does not apply to this protocol. It is a common object inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting thi…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.12
nwDecIVProtoIfSnoopingmandatory Controls the operation of DECnet Phase IV distance-vector-based routing protocol snooping on the router port. When snooping is enabled the DECnet Phase IV distance-vector-based routing protocol operates in passive mode…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.13
nwDecIVProtoIfTypemandatory Indicates whether the directly connected network segment does or does not support broadcast media access.	Enumeration Enumerated Values: 1 other 2 bma 3 nbma	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.14
nwDecIVProtoIfXmitCostmandatory Sets the cost of transmitting a packet on the network segment connected to the router port for which the entry exists. The DECnet Phase IV distance-vector-based routing protocol picks the route with the least total nwDe…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.15
nwDecIVProtoIfAclIdentifiermandatory Specifies the Access Control ID of the access control list in effect for DECnet Phase IV distance-vector-based routing protocol packets on the router port for which the entry exists. A value of 0 indicates that there is…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.16
nwDecIVProtoIfAclStatusmandatory Controls the operation of the access control list identified by nwDecIVProtoIfAclIdentifier. Enabled (3) applies the access control list to all DECnet Phase IV distance-vector-based routing protocol packet traffic on th…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.1.1.1.17

This table contains an entry for each router port. This table is
indexed by nwDecIVProtoIfCtrIfIndex which indicates the value of
MIB2 ifindex, which identifies the router port for which the entry
exists.

nwDecIVProtoIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1

Each entry indicates the current packet and byte count of DECnet
Phase IV distance-vector-based routing protocol packets on the router
port for which the entry exists.

Indexes

nwDecIVProtoIfCtrIfIndex

Column	Syntax	OID
nwDecIVProtoIfCtrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.1
nwDecIVProtoIfCtrAdminStatusmandatory Sets the administrative state of the per-port DECnet Phase IV distance-vectorbased routing protocol packet and byte counters on the router port for which the entry exists. Enabled (3) causes these counters to become act…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.2
nwDecIVProtoIfCtrResetmandatory Resets the per-port DECnet Phase IV distance-vector-based routing protocol packet and byte counters on the router port for which the entry exists. Reset (2) resets the counters to 0. nwDecIVProtoIfCtrOperationalTime is …	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.3
nwDecIVProtoIfCtrOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwDecIVProtoIfCtrAdminStatus has been in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.4
nwDecIVProtoIfCtrInPktsmandatory Indicates the total number of DECnet Phase IV distance-vector-based routing protocol packets that have been received, during nwDecIVProtoIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.5
nwDecIVProtoIfCtrOutPktsmandatory Indicates the total number of DECnet Phase IV distance-vector-based routing protocol packets that have been transmitted, during nwDecIVProtoIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.6
nwDecIVProtoIfCtrFilteredPktsmandatory Indicates the total number of DECnet Phase IV distance-vector-based routing protocol packets that have been administratively filtered, during nwDecIVProtoIfCtrOperationalTime, on the router port for which the entry exis…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.7
nwDecIVProtoIfCtrDiscardPktsmandatory Indicates the total number of DECnet Phase IV distance-vector-based routing protocol packets that have been discarded, during nwDecIVProtoIfCtrOperationalTime, that were received on the router port for which the entry e…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.8
nwDecIVProtoIfCtrInBytesmandatory Indicates the total number of bytes in the DECnet Phase IV distance-vector-based routing protocol packets that have been received, during nwDecIVProtoIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.9
nwDecIVProtoIfCtrOutBytesmandatory Indicates the total number of bytes in the DECnet Phase IV distance-vector-based routing protocol packets that have been transmitted, during nwDecIVProtoIfCtrOperationalTime, on the router port for which the entry exist…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.10
nwDecIVProtoIfCtrFilteredBytesmandatory Indicates the total number of bytes in the DECnet Phase IV distance-vector-based routing protocol packets that have been administratively filtered, during nwDecIVProtoIfCtrOperationalTime, that were received on the rout…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.11
nwDecIVProtoIfCtrDiscardBytesmandatory Indicates the total number of bytes in the DECnet packets that have been discarded, during nwDecIVProtoIfCtrOperationalTime, that were received on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.4.1.1.2.2.1.1.12

This table contains an entry for each route being used to forward
DECnet data packets..

nwDecIVFibEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.5.1.1

Each entry in the table describes a route to a particular DECnet
destination network and node.

Indexes

nwDecIVFibNodeId

Column	Syntax	OID
nwDecIVFibNodeIdmandatory Contains the DECnet Address of the destination node of the route for which the entry exists.	DecIVAddress	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.5.1.1.1
nwDecIVFibNextHopNodeIdmandatory Contains the DECnet Address of the next hop router for the route for which the entry exists.	DecIVAddressr/w	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.5.1.1.2
nwDecIVFibNextHopIfmandatory Indicates the value of MIB 2 ifindex, which identifies the router port through which the route exists.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.5.1.1.3
nwDecIVFibRouteTypemandatory Indicates the status of the route. A value of 3 indicates that the destination is on the network segment that is directly connected to the router port identified by nwDecIVFibNextHopIf. A value of 4 indicates that the d…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 direct 4 remote	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.5.1.1.4

The DecIV Address translation table used for mapping 
a DecIV address to a circuit identifier (if applicable), 
corresponding port number, and framing type.

nwDecIVHostMapEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1

Each entry contains one DecIVAddress to circuit
equivalence. Also provided is the framing required to
converse with this host, and the corresponding logical
port number.

Indexes

nwDecIVHostMapIfIndex nwDecIVHostMapDecIVAddr

Column	Syntax	OID
nwDecIVHostMapIfIndexmandatory This is the primary (major) index into the DecIV HostMap table. This number corresponds to the index into the MIB-2 Interfaces Group which describes the DecIV router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1.1
nwDecIVHostMapDecIVAddrmandatory The DecIVAddress of the host on the corresponding interface and circuit (if applicable).	DecIVAddress	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1.2
nwDecIVHostMapTypemandatory Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nwDecIVHostMapTable. That is, it effectively dissasociates the circuitand/or interface identified with said ent…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 dynamic 4 static 5 inactive	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1.3
nwDecIVHostMapCircuitIDmandatory The identifier for the virtual circuit present on the interface. On an interface configured for Frame Relay, this number is the DLCI for the DecIV Address at the end of the circuit. For non-WAN interfaces, the value of…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1.4
nwDecIVHostMapFramingmandatory Specifies the framing type required to converse with the host for which this entry exists.	Enumerationr/w Enumerated Values: 1 other 2 ethernet 3 snap 8 nativewan 9 encapenet 11 encapenetsnap 14 encaptrsnap 16 encapfddisnap 17 canonical	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1.5
nwDecIVHostMapPortNumbermandatory The unique value for the logical port number. It's value ranges between 1 and a maximum value which is dependent on both the number of configured interfaces in the system and the number of circuits present on those inte…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.6.3.1.1.6

This table contains the access control list information for DECnet
traffic. This table contains entries each of which specifies whether
packet forwarding between a particular source destination pair is
permitted or denied. Each entry is part of a particular access 
control list. Each list is identified by a unique Access Control ID.
Each list may contain multiple entries ordered by sequence number.
When an Access Control List is searched, it is searched in sequence
number order and the first match found ends the search. If no match
is found, access defaults to permitted.

nwDecIVAclEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.7.2.1

Each entry contains DECnet source/destination access information.

Indexes

nwDecIVAclIdentifier nwDecIVAclSequence

Column	Syntax	OID
nwDecIVAclIdentifiermandatory This is the primary (major) index into the DECnet access control list table. This value identifies each access control list by a unique identifier, a number arbitrarily assigned by the user. All entries that have the s…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.7.2.1.1
nwDecIVAclSequencemandatory This is the secondary (minor) index into the DECnet access control list table. This number corresponds to a sequence number used to order multiple entries within the same access control list.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.7.2.1.2
nwDecIVAclPermissionmandatory Specifies whether access is allowed or denied between the source and destination address pair. Note that source and destination are interchangeable when bi-directional control is selected. To remove an existing entry s…	Enumerationr/w Enumerated Values: 1 other 2 invalid 3 permit 4 deny 5 permit-bidirectional 6 deny-bidirectional	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.7.2.1.3
nwDecIVAclMatchesmandatory Indicates the number of matches on this entry that have resulted in the permit/deny access restriction being applied as part of the forwarding process.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.7.2.1.4
nwDecIVAclDestAddressmandatory Specifies the destination DECnet Address used to compare for matches on the access control list. Either the Area ID or Node ID of this address may be set to 0, a wildcard value which matches all areas or all nodes.	DecIVAddressr/w	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.7.2.1.5
nwDecIVAclSrcAddressmandatory Specifies the source DECnet Address used to compare for matches on the access control list. Either the Area ID or Node ID of this address may be set to a wildcard value which matches all areas or all nodes.	DecIVAddressr/w	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.7.2.1.6

This table contains and entry for each event filter configured for
DECnet Phase IV Routing Services events.

nwDecIVEventFilterEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.2.1.1

Each entry describes an event filter which defines a particular type
of event to be logged to the event log. The value of
nwDecIVEventFltrProtocol indicates the value used either in the
nwRtgProtocolTable or the nwCompo…

Indexes

nwDecIVEventFltrProtocol nwDecIVEventFltrIfNum

Column	Syntax	OID
nwDecIVEventFltrProtocolmandatory Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentRtgInstance which identifies the protocol involved in the event for which the event filter exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.2.1.1.1
nwDecIVEventFltrIfNummandatory Specifies the router port involved in the event for which the event filter exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.2.1.1.2
nwDecIVEventFltrControlmandatory Set this value to 3 to add the entry to the event filter table. Set this value to 2 to remove the entry from the event filter table.	Enumerationr/w Enumerated Values: 1 other 2 delete 3 add	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.2.1.1.3
nwDecIVEventFltrTypemandatory This 6 bit mask specifies the types of events to be logged. By default all 6 bits are set to 1, indicating that all types of events are to be logged. Setting any bit to 0 removes an event type from this field and preve…	Enumerationr/w Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 diags 64 error	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.2.1.1.4
nwDecIVEventFltrSeveritymandatory Specifies the level of severity an event must meet in order to be logged. Controls the amount of event logging by ignoring events of a lower priority than specified by this filter value. `Highmed' ignores only events of…	Enumerationr/w Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.2.1.1.5
nwDecIVEventFltrActionmandatory Specifies how the events are to be logged. Logging to the `log' stores the events in the event log table (nwDecIVEventLogTable). Logging to'trap' sends events out through the trap mechanism.	Enumerationr/w Enumerated Values: 1 log 2 trap 3 log-trap	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.2.1.1.6

This table contains an entry for each event that has been
logged.

nwDecIVEventEntry row .1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1

Each entry contains the information about an event that has
been logged to the event table.

Indexes

nwDecIVEventNumber

Column	Syntax	OID
nwDecIVEventNumbermandatory An ordinal value assigned to the event for which the log entry exists. nwDecIVEventNumber is assigned so that each event in the event log can be uniquely identified by the value of nwDecIVEventNumber.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1.1
nwDecIVEventTimemandatory Indicates the time at which the event was logged to the event log.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1.2
nwDecIVEventTypemandatory Indicates the type of event that was logged.	Enumeration Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 error	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1.3
nwDecIVEventSeveritymandatory Indicates the severity that was assigned to the event.	Enumeration Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1.4
nwDecIVEventProtocolmandatory Indicates the value of the Cabletron Routing Services MIB nwRtgProtocolInstance or nwComponentInstance which identifies the protocol or component that was involved in the event.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1.5
nwDecIVEventIfNummandatory Indicates the router port that was involved in the event.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1.6
nwDecIVEventTextStringmandatory Contains the actual text string that was logged.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.3.2.10.3.1.1.7