CTRON-APPN-MIB Table View

This table contains entries for LUs that are owned by adjacent
LEN nodes. Defining or deleting an entry is equivalent to defining
or deleting an entry in the directory database. To add an entry,
set nwAppnSysLuControl to other. To delete an entry, set
nwAppnSysLuControl to delete.

nwAppnSysLuEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1

Each entry defines an LU entry in the directory database. The
fully qualified CP name and the name of the LU are the indexes into
this table.

Indexes

nwAppnSysCpName nwAppnSysLuName

Column	Syntax	OID
nwAppnSysCpNamemandatory Specifies the fully qualified name of the Control Point containing the LU being defined. The format of this name is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the LU or Control Point nam…	OctetStringr/w Constraints: range: 3-17	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.1
nwAppnSysLuNamemandatory Specifies the name of the LU being registered. The name format is LLLLLLLL where LLLLLLLL are the characters: uppercase letters A through Z, numerics 0 through 9, and the special characters $, @, and #. The first charac…	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.2
nwAppnSysLuControlmandatory Set this object to delete to remove an entry.	Enumerationr/w Enumerated Values: 1 other 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.1.1.3.1.1.3

This table contains an entry for each router port which can
be used by APPN Routing Services. This table is indexed by
nwAppnFwdIfIndex, which indicates the value of MIB 2 ifindex
which identifes the router port for which an entry exists.
These port configuration entries will be provided automatically
based on physical port configuration. Such entries cannot be
deleted - only modified.

nwAppnFwdIfEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1

Each entry specifies the APPN Routing Services port
configuration for the router port for which the entry exists.

Indexes

nwAppnFwdIfIndex

Column	Syntax	OID
nwAppnFwdIfIndexmandatory Indicates the value of MIB2 ifindex, which identifies the router port for which the entry exists.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.1
nwAppnFwdIfAdminStatusmandatory Sets the administrative state of an APPN Routing Services port for which the entry exists. enabled(3) causes the APPN Routing Services port to become active. disable(2) causes it to become inactive. There are various c…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.2
nwAppnFwdIfOperStatusmandatory Indicates the current operating condition of the APPN Routing Services port for which the entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pendingDisable 5 pendingEnable	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.3
nwAppnFwdIfOperationalTimemandatory Indicates the elapsed time, in hundredths of a second, that nwAppnFwdIfOperStatus has been in the current state.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.4
nwAppnFwdIfControlmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Enumerationr/w Enumerated Values: 1 other	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.5
nwAppnFwdIfMtumandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.6
nwAppnFwdIfForwardingmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.7
nwAppnFwdIfFrameTypemandatory Specifies the framing type for the APPN Routing Services port for which the entry exists.	Enumerationr/w Enumerated Values: 1 other 2 ethernet 4 i8022 8 sync	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.8
nwAppnFwdIfAclIdentifiermandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.9
nwAppnFwdIfAclStatusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.10
nwAppnFwdIfCacheControlmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.11
nwAppnFwdIfCacheEntriesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.12
nwAppnFwdIfCacheHitsmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.13
nwAppnFwdIfCacheMissesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs. Setting th…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.1.1.14

This table contains additional APPN definitions for each
physical port. Entries cannot be added to or deleted from this
table. With the exception of nwAppnExtIfStopType, objects in
this table may only be modified when nwAppnFwdIfAdminStatus
is disabled.  Note: if APPN Routing Services is not active, no
entries will exist for this table.

nwAppnExtEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1

Each entry specifies additional APPN configuration parameters
for the port for which this entry exists.

Indexes

nwAppnExtIfIndex

Column	Syntax	OID
nwAppnExtIfIndexmandatory Specifies the primary index into the APPN port extension table. This number corresponds to the index into the nwAppnFwdIfTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.1
nwAppnExtIfPortNamemandatory Specifies the user friendly name for this port.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.2
nwAppnExtIfPortTypemandatory Specifies the type of line used by the port. The value corresponds to one of the following: nonswitched(1), switched(2), or satf(3).	Enumerationr/w Enumerated Values: 1 nonswitched 2 switched 3 satf	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.4
nwAppnExtIfDlcTypemandatory Specifies the type of DLC using the port.	Enumeration Enumerated Values: 1 llc2 2 sdlc 3 x25	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.5
nwAppnExtIfMaxRBtuSizemandatory Specifies the maximum Message Unit (MU) size that can be received.	Integer32r/w Constraints: range: 99-65535	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.6
nwAppnExtIfTotLsActLimmandatory Specifies the total number of links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnExtIfLocalLsRole = negotiable(1), or secondary(3), then this value must be set to 1.	Integer32r/w Constraints: range: 1-256	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.7
nwAppnExtIfInbLsActLimmandatory Specifies the total number of inbound links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnExtIfLocalLsRole = negotiable(1) or primary(2), then this value must be set to 0.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.8
nwAppnExtIfOutbLsActLimmandatory Specifies the total number of outbound links that can be active on this port. If nwAppnExtIfPortType = nonswitched(1) and nwAppnExtIfLocalLsRole = negotiable(1), then this value must be set to 0. If nwAppnExtIfLocalLs…	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.9
nwAppnExtIfLocalLsRolemandatory Specifies the link station role - primary, secondary, or negotiable. For nwAppnExtIfPortType = satf(3), the link station role must be negotiable(1).	Enumerationr/w Enumerated Values: 1 negotiable 2 primary 3 secondary	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.10
nwAppnExtIfActXidXchgLimitmandatory Specifies the total number of activation XIDs that may be exchanged.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.11
nwAppnExtIfNonActXidXchgLimitmandatory Specifies the total number of non-activation XIDs that may be exchanged.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.12
nwAppnExtIfLsXmitRcvCapmandatory Specifies the link station's transmit/receive capability.	Enumerationr/w Enumerated Values: 1 twowaysimultaneous 2 twowayalternating	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.13
nwAppnExtIfMaxIfrmRcvdmandatory Specifies the maximum number of I-frames received before an acknowledgment is sent to the sender.	Integer32r/w Constraints: range: 1-127	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.14
nwAppnExtIfDfltTargetPacingmandatory Specifies the pacing window size for BINDs on this transmission group.	Integer32r/w Constraints: range: 1-32767	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.15
nwAppnExtIfDfltMaxSBtuSizemandatory Specifies the maximum Message Unit (MU) size which can be sent.	Integer32r/w Constraints: range: 99-65535	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.16
nwAppnExtIfDfltEffectCapmandatory Specifies the default maximum kilo bits per second rate (line speed) for all links on this port.	Integer32r/w Constraints: range: 0-603979776	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.17
nwAppnExtIfDfltConnectCostmandatory Specifies the default cost per connect time for all link stations on this port. 0 is the lowest cost and 255 is the largest cost.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.18
nwAppnExtIfDfltByteCostmandatory Specifies the default Cost per Byte for link stations. 0 is the lowest cost and 255 is the largest cost.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.19
nwAppnExtIfDfltSecuritymandatory Specify one of the following security selections: non-secure - specifies no security. public switched - data flows over a public switched network. underground cable - data tr…	Enumerationr/w Enumerated Values: 1 nonsecure 32 publicSwitchNw 64 undergroundCable 96 secureConduit 128 guardedConduit 160 encrypted 192 guardedRadiation	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.20
nwAppnExtIfDfltPropDelaymandatory Specifies the propagation delay which represents the relative time it takes for a signal to travel the length of the link in microseconds, with some of the more common default values enumerated. The default times in par…	Enumerationr/w Enumerated Values: 0 minimum 384 negligible 9216 terrestrial 147456 packetswitched 294912 long 2013265920 maximum	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.21
nwAppnExtIfDfltUsrDef1mandatory Specifies user defined parameter 1.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.22
nwAppnExtIfDfltUsrDef2mandatory Specifies user defined parameter 2.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.23
nwAppnExtIfDfltUsrDef3mandatory Specifies user defined parameter 3.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.24
nwAppnExtIfStopTypemandatory Specifies the type of shutdown for APPN Routing Services on the port. Once set, nwAppnFwdIfAdminStatus may be set to disable. The disable choices are as follows: immediate(1) causes the link stations b…	Enumerationr/w Enumerated Values: 1 immediate 2 orderly	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.25
nwAppnExtIfCpCpSuppmandatory Specifies whether CP-CP sessions are permitted on dynamic links generated on this port.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.26
nwAppnExtIfLimitedRsrcmandatory Specifies whether dynamic links generated on this port are a limited resource. A limited resource link will be deactivated when there are no sessions using the link.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.27
nwAppnExtIfAddressmandatory Specifies the physical address of this port depending on the media type. For token ring or ethernet ports, the information is the 6 byte MAC address which starts in byte 1 and ends in byte 6. For token ring ports the MA…	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.28
nwAppnExtIfSsapmandatory For token ring or ethernet ports specifies the Source SAP Address of this port.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.2.1.29

This table contains definitions for the Connection
Network port table which defines which local ports can
access a connection network. To add a row to the table,
nwAppnIfCnPtFqName and nwAppnIfCnPtName are required entries.
To delete a row, set the control field to delete.
Adding the first row for a connection network implicitly
creates the connection network and deleting the last
remaining row for a connection network implicitly removes
the connection network.

nwAppnIfCnPortEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1

Specifies the APPN Connection Network port definitions.

Indexes

nwAppnIfCnPtFqName nwAppnIfCnPtName

Column	Syntax	OID
nwAppnIfCnPtFqNamemandatory Specifies the fully-qualified Name of the Virtual Routing Node. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the Control Point name. Valid characters to make up these two…	OctetStringr/w Constraints: range: 3-17	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1.1
nwAppnIfCnPtNamemandatory Specifies one of the ports which can access this Connection Network.	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1.2
nwAppnIfCnPtControlmandatory Set this object to delete to delete this port from this Connection Network.	Enumerationr/w Enumerated Values: 1 other 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.1.1.3

This table contains the APPN definitions for a Connection
Network's transmission group characteristics. Rows may be
neither added nor deleted, only modified. Rows are
added/deleted implicitly through CnPortTable.

nwAppnIfCnTgCharEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1

Specifies the APPN transmission group characteristics for
the Connection Network.

Indexes

nwAppnIfCnTgFqName

Column	Syntax	OID
nwAppnIfCnTgFqNamemandatory Specifies the fully-qualified Name of the Virtual Routing Node. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the Control Point name. Valid characters to make up these two…	OctetStringr/w Constraints: range: 3-17	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.1
nwAppnIfCnTgEffectCapmandatory Specifies the maximum kilo bits per second rate (link speed) for the connection network.	Integer32r/w Constraints: range: 0-603979776	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.2
nwAppnIfCnTgConnectCostmandatory Specifies the cost per connect time for the Connection Network. 0 is the lowest cost and 255 is the largest cost.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.3
nwAppnIfCnTgByteCostmandatory Specifies the cost per byte for the Connection Network. 0 is the lowest cost and 255 is the largest cost.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.4
nwAppnIfCnTgSecuritymandatory For the Connection Network, specify one of the following security selections: non-secure - specifies no security. public switched - data flows over a public switched network. undergro…	Enumerationr/w Enumerated Values: 1 nonsecure 32 publicSwitchNw 64 undergroundCable 96 secureConduit 128 guardedConduit 160 encrypted 192 guardedRadiation	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.5
nwAppnIfCnTgPropDelaymandatory Specifies the propagation delay which represents the time it takes for a signal to travel the length of the link in microseconds, with some of the more common default values enumerated. The default times in parentheses…	Enumerationr/w Enumerated Values: 0 minimum 384 negligible 9216 terrestrial 147456 packetswitched 294912 long 2013265920 maximum	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.6
nwAppnIfCnTgUsrDef1mandatory Specifies user defined parameter 1.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.7
nwAppnIfCnTgUsrDef2mandatory Specifies user defined parameter 2.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.8
nwAppnIfCnTgUsrDef3mandatory Specifies user defined parameter 3.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.1.3.2.1.9

This table contains the Message Unit (MU) and byte counters for
each port configured and enabled for APPN Routing Services.

nwAppnFwdIfCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1

Each entry indicates Message Units (MU) and byte counts on
the router port for which this entry exists.

Indexes

nwAppnFwdIfCtrIfIndex

Column	Syntax	OID
nwAppnFwdIfCtrIfIndexmandatory Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. This is the primary index into the APPN per-port counter table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.1
nwAppnFwdIfCtrAdminStatusmandatory Sets the administrative state of the per-port Message Unit (MU) and byte counters on the router port for which the entry exists. enabled(3) causes these counters to become active. disabled(2) causes these counters to b…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.2
nwAppnFwdIfCtrResetmandatory Resets the per-port Message Unit (MU) and byte counters on the router port for which this entry exists. reset (2) resets the counters to 0. nwAppnFwdIfCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.3
nwAppnFwdIfCtrOperationalTimemandatory Indicates the amount of time in hundreths of a second that the per-port Message Unit (MU) and byte counters have been active on the APPN routing services port for which this entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.4
nwAppnFwdIfCtrInMusmandatory Indicates the total number of Message Units (MU)s that have been received, during nwAppnFwdIfCtrOperationaltime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.5
nwAppnFwdIfCtrOutMusmandatory Indicates the total number of Message Units (MU)s that have been transmitted, during nwAppnFwdIfCtrOperationalTime, on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.6
nwAppnFwdIfCtrFwdMusmandatory Indicates the total number of Message Units (MU)s that have been forwarded during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.7
nwAppnFwdIfCtrFilteredMusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.8
nwAppnFwdIfCtrDiscardMusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.9
nwAppnFwdIfCtrAddrErrMusmandatory Indicates the total number of Message Units (MUs) that contain an address error in the SNA header that have been received during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.10
nwAppnFwdIfCtrLenErrMusmandatory Indicates the total number of Message Units (MUs) that contain a length error that have been received during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.11
nwAppnFwdIfCtrHdrErrMusmandatory Indicates the total number of Message Units (MUs) that contain a header error other than an address or length error that have been received during nwAppnFwdIfCtrOperationalTime on the router port for which this entry ex…	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.12
nwAppnFwdIfCtrInBytesmandatory Indicates the total number of bytes in the Message Units (MU)s that have been received, during nwAppnFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.13
nwAppnFwdIfCtrOutBytesmandatory Indicates the total number of bytes in the Message Units (MU)s that have been transmitted, during nwAppnFwdIfCtrOperationalTime, on the router port for which the entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.14
nwAppnFwdIfCtrFwdBytesmandatory Indicates the total number of bytes in Message Units (MU)s that have been forwarded during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.15
nwAppnFwdIfCtrFilteredBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.16
nwAppnFwdIfCtrDiscardBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.17
nwAppnFwdIfCtrHostInMusmandatory Indicates the total number of Message Units (MUs) that have been delivered to local half sessions during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.18
nwAppnFwdIfCtrHostOutMusmandatory Indicates the total number of Message Units (MUs) that have been successfully sent from local half sessions to Path Control during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.19
nwAppnFwdIfCtrHostDiscardMusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.20
nwAppnFwdIfCtrHostInBytesmandatory Indicates the total number of bytes in Message Units (MUs) that have been delivered to local half sessions during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.21
nwAppnFwdIfCtrHostOutBytesmandatory Indicates the total number of bytes in Message Units (MUs) that have been successfully sent from local half sessions to Path Control during nwAppnFwdIfCtrOperationalTime on the router port for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.22
nwAppnFwdIfCtrHostDiscardBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.2.2.1.1.23

This table contains the configuration and management 
information for links to adjacent link stations. This table is
indexed by nwAppnFwdLsName.  Operations which apply are add,
delete, modify, enable, and disable.  To add a row to the
table, the required fields in the row must be provided.
The required fields are nwAppnFwdLsPortName and 
nwAppnFwdLsDestAddr.  All other fields which are not provided
will be defaulted.  To enable a link select enable(3) from
nwAppnFwdLsAdminStatus. To delete a row, set nwAppnFwdLsControl
to delete(3).  To disable a link set nwAppnFwdLsStopType and
then select disable(2) in nwAppnFwdLsAdminStatus.
If nwAppnFwdLsStopType is not selected, the link is disabled in
an orderly fashion.

nwAppnFwdLsEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1

Specifies the configuration for a link to an adjacent link
station for which the entry exists.

Indexes

nwAppnFwdLsName

Column	Syntax	OID
nwAppnFwdLsNamemandatory Specifies the primary index to the adjacent link station table (nwAppnFwdLsTable).	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.1
nwAppnFwdLsAdminStatusmandatory Sets the administrative state of a link to an adjacent link station. enabled(3) causes the link to become established. disable(2) causes the link to terminate. There are various severities of disabling a link which are …	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.2
nwAppnFwdLsOperStatusmandatory Specifies the current operating status of the link for which this entry exists.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled 4 pendingDisable 5 pendingEnable	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.3
nwAppnFwdLsOperationalTimemandatory Specifies the elapsed time, in hundredths of a second, that nwAppnFwdLsAdminStatus has been either enabled or DISABLED. If the operational state is pending-disable, nwAppnFwdLsOperationalTime indicates the amount of tim…	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.4
nwAppnFwdLsControlmandatory Set this object to delete in order to delete the entry.	Enumerationr/w Enumerated Values: 1 other 3 delete	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.5
nwAppnFwdLsPortNamemandatory This link station port name corresponds to the port name index into the the nwAppnExtensionTable which describes the router port on which the adjacent link station is defined.	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.6
nwAppnFwdLsAdjCpNamemandatory Specifies the fully-qualified, 17 byte long, adjacent Control Point name. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and CCCCCCCC is the Control Point name. Valid characters to make up…	OctetStringr/w Constraints: range: 3-17	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.7
nwAppnFwdLsAdjCpTypemandatory Specifies the adjacent node type. The following values are valid: endnode(1), networknode(2). endnode(1) includes both End Node and LEN node types.	Enumerationr/w Enumerated Values: 1 endnode 2 networknode	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.8
nwAppnFwdLsAutoActSupportmandatory Specifies whether the link is automatically enabled when a session is activated over the link. It is an error to set this to yes(1) when nwAppnFwdLsCpCpSessSupp is set to yes(1).	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.10
nwAppnFwdLsLimitedRsrcmandatory Specifies whether this link is to be deactivated when there are no sessions using the link. If nwAppnFwdLsCpCpSessSupp is yes, however, the link will not be deactivated if CP-CP sessions are terminated. Note also that a…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.11
nwAppnFwdLsSscpSessionmandatory Requests a host system to initiate sessions between its SSCP and dependent LUs within APPN Routing Services. If set to yes, then nwAppnFwdLsPuName is required. Note: once this parameter is set along with other link stat…	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.12
nwAppnFwdLsPuNamemandatory Specifies the name of the local PU if nwAppnFwdLsSscpSession is set to yes. Valid characters are uppercase A through Z and numerics 0 through 9. The name must start with an alphabetic character. Note: once this parame…	OctetStringr/w Constraints: range: 1-8	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.13
nwAppnFwdLsBackLvlLenENmandatory Specifies whether or not the adjacent node is a back level LEN Node. If so, specify the type of back level LEN node as follows: xid3(2) - supports XID-3 protocols, but does not include …	Enumerationr/w Enumerated Values: 1 no 2 xid3 3 xid0 4 noxid	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.14
nwAppnFwdLsCpCpSessSuppmandatory Specifies whether this link supports CP to CP sessions.	Enumerationr/w Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.16
nwAppnFwdLsEffectCapmandatory Specifies th maximum kilo bits per second rate (link speed) for the link.	Integer32r/w Constraints: range: 0-603979776	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.17
nwAppnFwdLsConnectCostmandatory Specifies the cost per connect time for the link. Zero is the lowest cost and 255 is the largest cost.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.18
nwAppnFwdLsByteCostmandatory Specifies the cost per Byte for the link. Zero is the lowest cost and 255 is the largest cost.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.19
nwAppnFwdLsSecuritymandatory Security selections available for the link are as follows: non-secure - specifies no security. public switched - data flows over a public switched network. underground cable -…	Enumerationr/w Enumerated Values: 1 nonsecure 32 publicSwitchNw 64 undergroundCable 96 secureConduit 128 guardedConduit 160 encrypted 192 guardedRadiation	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.20
nwAppnFwdLsPropDelaymandatory Specifies the propagation delay which represents the relative time it takes for a signal to travel the length of the link in microseconds, with some of the more common default values enumerated. The default times in pa…	Enumerationr/w Enumerated Values: 0 minimum 384 negligible 9216 terrestrial 147456 packetswitched 294912 long 2013265920 maximum	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.21
nwAppnFwdLsUsrDef1mandatory Specifies user defined parameter 1.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.22
nwAppnFwdLsUsrDef2mandatory Specifies user defined parameter 2.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.23
nwAppnFwdLsUsrDef3mandatory Specifies user defined parameter 3.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.24
nwAppnFwdLsTrgtPacingCountmandatory Species the desired pacing window size for BINDs on this transmission group. The number is a value between 0 and 32767 and is significant only when fixed bind pacing is being used.	Integer32r/w Constraints: range: 0-32767	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.25
nwAppnFwdLsMaxSendBtumandatory Specifies maximum Message Unit (MU) size that can be sent.	Integer32r/w Constraints: range: 99-65535	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.26
nwAppnFwdLsNumActiveSessionmandatory Specifies total number of active sessions on this link. This includes both end point sessions and intermediate sessions.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.27
nwAppnFwdLsdynamicLsmandatory Specifies whether this link station was dynamically allocated (yes(1)) or whether the link station was defined by the user (no(2)).	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.28
nwAppnFwdLsStopTypemandatory Specifies the type of shutdown for a link. Once selected, set disable in nwAppnFwdIfAdminStatus. The shutdown choices are as follows: immediate(1) causes the link station to disconnect imme…	Enumerationr/w Enumerated Values: 1 immediate 2 orderly	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.29
nwAppnFwdLsPortNbrmandatory This link station port number corresponds to the index into the nwAppnFwdIfTable and the nwAppnExtensionTable, which together describe the port used by APPN Routing Services.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.30
nwAppnFwdLsDestAddrmandatory Specifies the destination address of the adjacent link station depending on the media type. For token ring or ethernet ports, the information is the 6 byte Destination MAC Address which starts in byte 1 and ends in byte…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.31
nwAppnFwdLsDsapmandatory For a token ring or ethernet network, specifies the destination SAP address associated with the adjacent link station.	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.32
nwAppnFwdLsBlockNummandatory This represents the 3 hexadecimal digit block number which precedes the 5 digit id number in the 8 digit node id of the adjacent node. The node id is used in XIDs and Alerts. The block number identifies the product typ…	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.33
nwAppnFwdLsIdNummandatory This represents the 5 hexadecimal digit id number which follows the 3 digit block number in the 8 digit node id of the adjacent node. The node id is used in XIDs and Alerts. The id number uniquely identifies the adjacen…	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.1.1.1.34

This table contains the Basic Link Unit (BLU) and byte
counters for each configured adjacent link station.

nwAppnFwdLsCtrEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1

Each entry indicates the Basic Link Unit (BLU) and byte
count for the configured adjacent link station for which the
entry exists.

Indexes

nwAppnFwdLsCtrLsName

Column	Syntax	OID
nwAppnFwdLsCtrLsNamemandatory Specifies the primary index into the link station counter table. This index is the link station name.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.1
nwAppnFwdLsCtrAdminStatusmandatory Sets the administrative state of the Basic Link Unit (BLU) and byte counters on the link for which this entry exists. enabled(3) causes these counters to reset and become active. disabled(2) causes these counters to bec…	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.2
nwAppnFwdLsCtrResetmandatory Resets the Basic Link Unit (BLU) and byte counters on the link for which this entry exists. reset(2) resets the counters to 0. nwAppnFwdLsCtrOperationalTime is also reset to 0.	Enumerationr/w Enumerated Values: 1 other 2 reset	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.3
nwAppnFwdLsCtrOperationalTimemandatory Specifies the amount of time in hundreths of a second that the Basic Link Unit (BLU) and byte counters have been active on the link for which this entry exists.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.4
nwAppnFwdLsCtrInBlusmandatory Specifies the total number of Basic Link Unit (BLU)s that have been received, during nwAppnFwdLsCtrOperationaltime, on the link for which this entry exists. This includes both information (I-frame) and XID BLUs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.5
nwAppnFwdLsCtrOutBlusmandatory Specifies the total number of Basic Link Unit (BLU)s that have been transmitted, during nwAppnFwdLsCtrOperationalTime, on the link for which this entry exists. This includes both information (I-frame) and XID BLUs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.6
nwAppnFwdLsCtrFwdBlusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.7
nwAppnFwdLsCtrFilteredBlusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.8
nwAppnFwdLsCtrDiscardBlusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.9
nwAppnFwdLsCtrAddrErrBlusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.10
nwAppnFwdLsCtrLenErrBlusmandatory Specifies the total number of received Basic Link Unit (BLU)s during nwAppnFwdLsCtrOperationalTime which have invalid DLC headers on the link for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.11
nwAppnFwdLsCtrHdrErrBlusmandatory Specifies the total number of received Basic Link Unit (BLU)s during nwAppnFwdLsCtrOperationalTime which have length errors on the link for which this entry exists.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.12
nwAppnFwdLsCtrInBytesmandatory Specifies the total number of bytes that have been received, during nwAppnFwdLsCtrOperationalTime, on the link for which the entry exists. This includes bytes contained in information (I-frames) and XID BLUs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.13
nwAppnFwdLsCtrOutBytesmandatory Specifies the total number of bytes that have been transmitted, during nwAppnFwdLsCtrOperationalTime, on the link for which the entry exists. This includes bytes contained in information (I-frames) and XID BLUs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.14
nwAppnFwdLsCtrFwdBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.15
nwAppnFwdLsCtrFilteredBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.16
nwAppnFwdLsCtrDiscardBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.17
nwAppnFwdLsCtrHostInBlusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.18
nwAppnFwdLsCtrHostOutBlusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.19
nwAppnFwdLsCtrHostDiscardBlusmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.20
nwAppnFwdLsCtrHostInBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.21
nwAppnFwdLsCtrHostOutBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.22
nwAppnFwdLsCtrHostDiscardBytesmandatory This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common management interface to all the Cabletron Routing Services protocol-specific MIBs.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.2.3.2.1.1.23

This table contains descriptions of how to filter log entries.

nwAppnEventFilterEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1

Each entry specifies the filter for log entries. The
instance nwAppnEventProtocol refers to the instance used
in the nwRtgProtocolTable and nwComponentTable specified
by the ctrouter-mib.txt.

Indexes

nwAppnEventFltrProtocol nwAppnEventFltrIfNum

Column	Syntax	OID
nwAppnEventFltrProtocolmandatory Selects the protocol to log events from.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.1
nwAppnEventFltrIfNummandatory Specifies the APPN Routing Services port on which to log events.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.2
nwAppnEventFltrControlmandatory Setting this field to delete will allow entries to be removed from the table. This is done by adding new entries with instance fields that match the entry to be removed from the table. The new entry being added must h…	Enumerationr/w Enumerated Values: 1 other 2 delete 3 add	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.3
nwAppnEventFltrTypemandatory This bit field mask filter will allow only events of certain types to be logged. By default all types will be logged. Clearing event types from this field will cause those types not to be logged. Adding event types t…	Enumerationr/w Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 error	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.4
nwAppnEventFltrSeveritymandatory This filter controls the amount of logging by ignoring events of lower priority than that specified by the filter value. Specifying highest(1) causes all events except those of highest severity to be ignored. Specifying…	Enumerationr/w Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.5
nwAppnEventFltrActionmandatory This field specifies how the events are to be logged. Specifying log(1) stores the events in the event log table (defined below). Specifying trap(2) sends events out through the trap mechanism. Specifying logTrap(3) do…	Enumerationr/w Enumerated Values: 1 log 2 trap 3 logTrap	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.2.1.1.6

This table contains all events that have been logged.

nwAppnEventEntry row .1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1

Each entry specifies events that have been logged.

Indexes

nwAppnEventNumber

Column	Syntax	OID
nwAppnEventNumbermandatory This ordinal number uniquely identifies events.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.1
nwAppnEventTimemandatory This number specifies when the event was logged.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.2
nwAppnEventTypemandatory Specifies type of event logged.	Enumeration Enumerated Values: 1 misc 2 timer 4 rcv 8 xmit 16 event 32 diags 64 error	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.3
nwAppnEventSeveritymandatory Specifies the severity of the event logged.	Enumeration Enumerated Values: 1 highest 2 highmed 3 highlow	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.4
nwAppnEventProtocolmandatory Specifies the protocol where the event occured.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.5
nwAppnEventIfNummandatory Specifies the APPN Routing Services port the event occurred on.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.6
nwAppnEventTextStringmandatory Specifies the actual text string to be logged.	OctetString	.1.3.6.1.4.1.52.4.2.2.2.3.5.2.10.3.1.1.7