CTRON-AP3000-MIB Table View

The Table used to manage the function in
MAC Filter Table.

apvMacFilterOperateEntry row .1.3.6.1.4.1.52.4.13.2.3.1

An entry in the table, containing information
about configuration in one VAP of the AP.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apvMacFilterPermission This values indicates the Permission on all the active filter entry for each Vap. The negative permission will be applied on any inactive entry or any MAC that is not in the table.	Enumerationr/w Enumerated Values: 1 allowed 2 denied	.1.3.6.1.4.1.52.4.13.2.3.1.1
apvMacFilterAddressToAdd This values indicates the MAC address to be added to the local MAC filter table as an active entry for each Vap.	OctetStringr/w	.1.3.6.1.4.1.52.4.13.2.3.1.2

Table of status information about
each configured MAC Address Filtering Entry.

apvMacFilterEntry row .1.3.6.1.4.1.52.4.13.2.4.1

An entry in the table, containing information
about configuration in one radio of the AP.
MacFilterEntry is created and managed using
localMACFilterMgnt Table.

Indexes

RFC1213-MIBifIndex apvMacFilterIndex

Column	Syntax	OID
apvMacFilterIndex MAC Filter index in each VAP.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.2.4.1.1
apvMacFilterAddress This values indicates the MAC address of the filter entry.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.52.4.13.2.4.1.2
apvMacFilterActivity This value indicates the Activity of the MAC table entry by the filter permission. If allow(1), the filter permission will be applied to the MAC address. If denied(2), the filter permission will not be applied to the MA…	Enumerationr/w Enumerated Values: 1 allow 2 denied 3 deleteEntry	.1.3.6.1.4.1.52.4.13.2.4.1.3

Table of status information about
each configured MAC Type Entry for the QoS Management.

qosMACTypeEntry row .1.3.6.1.4.1.52.4.13.3.2.1

An entry in the table, containing information
about configuration MAC Type Entry for the QoS Management.

Indexes

qosMACTypeIndex

Column	Syntax	OID
qosMACTypeIndex Qos MAC Type index.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.3.2.1.1
qosMACTypeAddress This values indicates the MAC address of that specified index in the entry.	MacAddressr/w Type Constraints: range: 6	.1.3.6.1.4.1.52.4.13.3.2.1.2
qosMACTypePriority This values indicates the level of priority of that specified MAC Address in entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.13.3.2.1.3
qosMACTypeOpeStatus This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this…	Enumerationr/w Enumerated Values: 0 other 1 valid 2 invalid 3 create	.1.3.6.1.4.1.52.4.13.3.2.1.4

Table of status information about
each configured Ether Type Entry for QoS Management.

qosEtherTypeEntry row .1.3.6.1.4.1.52.4.13.3.3.1

An entry in the table, containing information
about configuration Ether Type for QoS Management.

Indexes

qosMACTypeIndex

Column	Syntax	OID
qosEtherTypeIndex Qos Ether Type index in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.3.3.1.1
qosEtherTypeHexValue The Hex Value to indicate the type of Ether of that specified index in the entry.	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.52.4.13.3.3.1.2
qosEtherTypePriority This values indicates the level of priority of that specified MAC Address in entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.13.3.3.1.3
qosEtherTypeOpeStatus This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this…	Enumerationr/w Enumerated Values: 0 other 1 valid 2 invalid 3 create	.1.3.6.1.4.1.52.4.13.3.3.1.4

Table of status information about
the radio Interface Link Quality Entry.

linkQualityEntry row .1.3.6.1.4.1.52.4.13.4.1.1

An entry in the table, containing information
about configuration of the radio Interface Link Quality.

Indexes

linkQualityRadioIndex linkQualityStaIndex

Column	Syntax	OID
linkQualityRadioIndex This is the value to define the index of the radio interface.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.4.1.1.1
linkQualityStaIndex This is value to define the index of link station.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.4.1.1.2
linkQualityStaMacAddress This values indicates the MAC address of the link station.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.52.4.13.4.1.1.3
linkQualityStaRssi This values indicates the percentage RSSI of the link station.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.52.4.13.4.1.1.4

Table of descriptive and status information about
configuration of each trap receiving server.

apSnmpTrapDestinationEntry row .1.3.6.1.4.1.52.4.13.5.3.1

An entry in the table, containing information
about configuration of one trap receiving server.

Indexes

apSnmpTrapDestinationIndex

Column	Syntax	OID
apSnmpTrapDestinationIndex Index of the Trap Destination Table.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.52.4.13.5.3.1.1
apSnmpTrapDestinationCommunity The SNMP Trap Community	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.52.4.13.5.3.1.2
apSnmpTrapDestinationIP The IP address of the trap receiving server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.13.5.3.1.3
apSnmpTrapDestinationState This value indicates whether the trap receiving server is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.5.3.1.4

Table of descriptive and status information about
configuration of each radio in terms of security settings.

apRadioSecurityEntry row .1.3.6.1.4.1.52.4.13.7.1.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

apRadioSecurityIndex

Column	Syntax	OID
apRadioSecurityIndex Radio Index for security settings.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.7.1.1.1
apRadioSecurityWEPAuthType This value indicates the type of WEP authentication in use for this radio interface. opensystem(0) Set authentication open sharedkey(1) Set authentication shared wpa(2) Set WPA Mode wpaps…	Enumerationr/w Enumerated Values: 0 opensystem 1 sharedkey 2 wpa 3 wpapsk 4 wpawpa2mixed 5 wpawpa2pskmixed 6 wpa2 7 wpa2psk	.1.3.6.1.4.1.52.4.13.7.1.1.2
apRadioSecuritySharedKeyLen This value indicates the shared key length for this radio interface.	Enumeration Enumerated Values: 0 none 1 sixtyFour 2 oneHundredTwentyEight 3 oneHundredFiftyTwo	.1.3.6.1.4.1.52.4.13.7.1.1.3
apRadioSecurityWPAMode This value indicates the state of WPA for this radio interface.	Enumerationr/w Enumerated Values: 0 supported 1 required 2 notSupported	.1.3.6.1.4.1.52.4.13.7.1.1.4
apRadioSecurityWPAKeyType This value indicates the type of WPA Key Management in use for this radio interface.	Enumerationr/w Enumerated Values: 0 dot1x 1 presharedkey	.1.3.6.1.4.1.52.4.13.7.1.1.5
apRadioSecurityWPACipherobsolete This value indicates the type of WPA Cipher in use for this radio interface.	Enumerationr/w Enumerated Values: 0 wep 1 tkip 2 aes	.1.3.6.1.4.1.52.4.13.7.1.1.6
apRadioSecurityWPAPSKType This value indicates the type of WPA Pre Shared Key in use for this radio interface.	Enumerationr/w Enumerated Values: 0 hex 1 alphanumeric	.1.3.6.1.4.1.52.4.13.7.1.1.7
apRadioSecurityWPAPSK This value indicates WPA Pre Shared Key in use for this radio interface.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.52.4.13.7.1.1.8
apRadioSecurityWEPKeyType This value indicates the type of WEP Key in use for this radio interface.	Enumerationr/w Enumerated Values: 0 hexadecimal 1 alphanumeric	.1.3.6.1.4.1.52.4.13.7.1.1.9
apRadioSecurityWEPEnabled This value indicates whether WEP is enabled.	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.52.4.13.7.1.1.10
apRadioSecurityWPACipherSuite This value indicates the type of WPA Cipher Suite in use for this radio interface.	Enumerationr/w Enumerated Values: 0 aesccmp 1 tkip 2 wep	.1.3.6.1.4.1.52.4.13.7.1.1.11
apRadioApSecurityWPAPreAuthentication Whether Pre-Authentication is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.7.1.1.12
apRadioApSecurityWPAPmksaLifetime The number (in minutes) for Pmksa-Lifetime.	Integer32r/w Constraints: range: 0-14400	.1.3.6.1.4.1.52.4.13.7.1.1.13

Table of descriptive and status information about
configuration of each radio.

enterpriseApRadioEntry row .1.3.6.1.4.1.52.4.13.8.2.1

An entry in the table, containing information
about configuration of one radio of the AP.

Indexes

enterpriseApRadioIndex

Column	Syntax	OID
enterpriseApRadioIndex Radio Index for configuration.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.8.2.1.1
enterpriseApRadioAutoChannel This value indicates whether auto channel selection is enabled or not for this radio interface	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.8.2.1.2
enterpriseApRadioTransmitPower This value indicates the transmit power for this radio interface.	Enumerationr/w Enumerated Values: 1 full 2 half 3 quarter 4 eighth 5 min	.1.3.6.1.4.1.52.4.13.8.2.1.3
enterpriseApRadioTurboMode This value indicates whether turbo mode is enabled for this radio interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 invalid	.1.3.6.1.4.1.52.4.13.8.2.1.4
enterpriseApRadioDataRate This value indicates the data rate for this radio interface. Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54. Radio interface G operates all listed data rates. The auto setting will attempt to set the best …	Enumerationr/w Enumerated Values: 1 oneMbps 2 twoMbps 5 fiveAndHalfMbps 6 sixMbps 9 nineMbps 11 elevenMbps 12 twelveMbps 18 eighteenMbps 24 twentyFourMbps 36 thirtySixMbps 48 fourtyEightMbps 54 fiftyFourMbps 255 auto	.1.3.6.1.4.1.52.4.13.8.2.1.5
enterpriseApRadioGMode This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface.	Enumerationr/w Enumerated Values: 1 bOnly 2 gOnly 3 bg 4 invalid	.1.3.6.1.4.1.52.4.13.8.2.1.6
enterpriseApRadioAntennaMode This value indicates the antenna mode in use for the G-radio. The values are interpreted as follows: both(1) means use both built-in antennas, left(2) means use left side. right(3) means use right s…	Enumerationr/w Enumerated Values: 1 both 2 left 3 right 4 invalid	.1.3.6.1.4.1.52.4.13.8.2.1.7
rogueApState This value is used to enable/disable Rogue Ap Detection for this radio interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.8.2.1.8
rogueApInterval How often to scan for Rogue Aps. The interval in minutes, with default of 720(minutes).	Integer32r/w Constraints: range: 30-10080	.1.3.6.1.4.1.52.4.13.8.2.1.9
rogueApDuration How long to scan each channel (in milliseconds). A longer duration will yield more complete results. A shorter duration will allow clients a better chance of remaining connected. Default value is 350(milliseconds).	Integer32r/w Constraints: range: 200-1000	.1.3.6.1.4.1.52.4.13.8.2.1.10
rogueApScanNow When writing the value to enable, the AP will trigger the Rouge AP scan function. The value will always return disable(2).	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.8.2.1.11
enterpriseApRadioAntennaModeControl This value indicates which antenna is in use for the radio Interface. The values are interpreted as follows: fixed(1) specify to use built-in antennas, external(2) specify to use one external antenna.	Enumeration Enumerated Values: 1 fixed 2 external	.1.3.6.1.4.1.52.4.13.8.2.1.12
enterpriseApRadioFixedAntennaType This value indicates which antenna type is in use as the fixed antenna is selected.	Enumerationr/w Enumerated Values: 1 diversity 2 left 3 right	.1.3.6.1.4.1.52.4.13.8.2.1.13
enterpriseApRadioAntennaID This value indicates which antenna ID will be in use for the radio Interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.8.2.1.14
enterpriseApRadioMulticastDataRate This value indicates the data rate for mc/bc packets from this radio interface. sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fortyEightMbps(48), and fiftyFourMbps(54)…	Enumerationr/w Enumerated Values: 1 oneMbps 2 twoMbps 5 fiveAndHalfMbps 6 sixMbps 9 nineMbps 11 elevenMbps 12 twelveMbps 18 eighteenMbps 24 twentyFourMbps 36 thirtySixMbps 48 fortyEightMbps 54 fiftyFourMbps	.1.3.6.1.4.1.52.4.13.8.2.1.15
enterpriseApRadioAutoDataRate This value indicates whether automated data rate is enabled or not for this radio interface	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.8.2.1.16
enterpriseApRadioPreamble This value indicates the preamble length of 11g. The values are interpreted as follows: long(1) sets the preamble length to long. short(2) sets the preamble length to short. invalid(3) means not sup…	Enumerationr/w Enumerated Values: 1 long 2 short 3 invalid	.1.3.6.1.4.1.52.4.13.8.2.1.17
enterpriseApRadioSWRetryMode This value indicates whether SW retty mode is enabled or not for this radio interface	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.8.2.1.18

Table of descriptive and status information about
configuration of each Vap radio.

enterpriseApVapRadioEntry row .1.3.6.1.4.1.52.4.13.8.3.1

An entry in the table, containing information
about configuration of one Vap radio of the AP.

Indexes

enterpriseApVapRadioIndex

Column	Syntax	OID
enterpriseApVapRadioIndex Radio Index for configuration.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.8.3.1.1
enterpriseApVapRadioState This value indicates the state of the radio interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.8.3.1.2
enterpriseApVapRadioSecureAccess This value indicates whether secure access is enabled for this radio interface.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.8.3.1.3
enterpriseApVapRadioMaxAssoc This value indicates the max number of clients allowed on this radio interface.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.52.4.13.8.3.1.4
enterpriseApVapRadioTransmitKey This value indicates default transmit key in use for this radio interface.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.52.4.13.8.3.1.5
enterpriseApVapRadioDescription This value indicates the description for this radio interface.	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.52.4.13.8.3.1.6
enterpriseApVapRadioDefefaultPriority This values indicates the level of default priority of that specified VAP in entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.13.8.3.1.7

Table of configuration information for Wds for each
Radio interface.

enterpriseApRadioWdsEntry row .1.3.6.1.4.1.52.4.13.8.4.1

An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadioTable). The table does not contain the…

Indexes

enterpriseApRadioIndex

Column	Syntax	OID
wdsApRole This value indicates the role of the Ap for this radio, roleAp(1): AP operation. roleBridgeMaster(2): Root-Bridge mode. roleBridge(3): Bridge Mode.	Enumerationr/w Enumerated Values: 1 roleAp 2 roleBridgeMaster 3 roleBridge	.1.3.6.1.4.1.52.4.13.8.4.1.1
wdsApAckTimeout This value indicates the WDS Ack timeout for this radio in us, and the following values can be set to the system: 0 Set wireless Ack Timeout as system default 20 0 to 1 miles: Ack timeout is 20 us 40 1 …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.8.4.1.2

Table of configuration information for Wds Peers for each
Radio interface.

enterpriseApRadioWdsPeerEntry row .1.3.6.1.4.1.52.4.13.8.5.1

An entry in the table, containing information
about configuration of peer Bridging
for one radio of the AP. The table is indexed by radio
Index (corresponding to enterpriseApRadi…

Indexes

enterpriseApRadioIndex wdsPeerIndex

Column	Syntax	OID
wdsPeerIndex Peer Index for the radio interface.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.52.4.13.8.5.1.1
wdsPeerBssid The BSSID for this peer.	OctetStringr/w Constraints: range: 1-17	.1.3.6.1.4.1.52.4.13.8.5.1.2
wdsPeerRSSI This value indicates the RSSI value of the WDS peer link.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.8.5.1.3

Conceptual table for WEP default keys.

enterpriseApRadioWEPKeysEntry row .1.3.6.1.4.1.52.4.13.8.6.1

An Entry (conceptual row) in the WEP Default Keys Table.
A collection of objects containing information used to
determine if a WEPkey as been defined and if so, the
value of the WEPkey.

Indexes

enterpriseApRadioIndex enterpriseApRadioWEPKeysIndex

Column	Syntax	OID
enterpriseApRadioWEPKeysIndex WEP Key Index for the radio interface.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.52.4.13.8.6.1.1
enterpriseApRadioWEPKeyType status of the WEP Key type	Enumeration Enumerated Values: 1 hexadecimalKey 2 alphanumericKey 3 otherKey	.1.3.6.1.4.1.52.4.13.8.6.1.2
enterpriseApRadioWEPKeyLength status of the WEP Key Length.	Enumeration Enumerated Values: 1 keyLength64Bit 2 keyLength128Bit 3 keyLength152Bit 4 keyLengthOther	.1.3.6.1.4.1.52.4.13.8.6.1.3

Conceptual table for Available Antenna List used in the Radio.

enterpriseApRadioAvAntennaListEntry row .1.3.6.1.4.1.52.4.13.8.7.1

An Entry (conceptual row) in the Antenna List Table.
A collection of objects containing information used to
show if an Antenna as been defined and if so, the
value of the antenna Id.

Indexes

enterpriseApRadioIndex enterpriseApRadioAvAntennaIndex

Column	Syntax	OID
enterpriseApRadioAvAntennaIndex Available Antenna List Index for the radio interface.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.13.8.7.1.1
enterpriseApRadioAvAntennaId Available antenna Id in the entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.8.7.1.2
enterpriseApRadioAvAntennaDesc The description of the antenna ID.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.52.4.13.8.7.1.3

Conceptual table for Available Channel List used in the Radio.

enterpriseApRadioAvChannelListEntry row .1.3.6.1.4.1.52.4.13.8.8.1

An Entry (conceptual row) in the Channel List Table.
A collection of objects containing information used to
show if a Channel No. as been defined and if so, the
value of the Channel No.

Indexes

enterpriseApRadioIndex enterpriseApRadioAvChannelIndex

Column	Syntax	OID
enterpriseApRadioAvChannelIndex Channel List Index for the radio interface.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.13.8.8.1.1
enterpriseApRadioAvChannelNo Available channel number in the entry	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.8.8.1.2

Table of descriptive and status information about
configuration of the filter protocol table.

enterpriseApFilterProtocolEntry row .1.3.6.1.4.1.52.4.13.10.4.1

An entry in the filter protocol table, containing information
about configuration of one filter table entry.

Indexes

enterpriseApFilterProtocolIndex

Column	Syntax	OID
enterpriseApFilterProtocolIndex Index of the Protocol Filters.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.10.4.1.1
enterpriseApFilterProtocolName This value indicates the name of the protocol filter. One of the following: Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation, CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL, Enet_Config_T…	DisplayString	.1.3.6.1.4.1.52.4.13.10.4.1.2
enterpriseApFilterProtocolISODesignator This value indicates the name of the protocol filter.	DisplayString	.1.3.6.1.4.1.52.4.13.10.4.1.3
enterpriseApFilterProtocolState This value indicates whether the protocol filter is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.10.4.1.4

Table of the control and status information about
configuration of the filter Control for each Vap.

apvFilterControlEntry row .1.3.6.1.4.1.52.4.13.10.6.1

An entry in the table, containing information
about configuration of the filter for each Vap of the AP.

Indexes

apvFilterControlIndex

Column	Syntax	OID
apvFilterControlIndex Index of the configuration.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.10.6.1.1
apvIBSSFilterControl This value indicates the local bridge filter(IBSS Relay Filter) setting.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.10.6.1.2
apvAPManageFilterControl This value indicates the AP management filter setting.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.10.6.1.3

Table used to manage the Vlans for each
wireless interface.

apNativeVlanEntry row .1.3.6.1.4.1.52.4.13.11.6.1

An entry in the table, containing information
about VLAN configuration of one wireless interface.

Indexes

apNativeVlanIfIndex apNativeVlanSsidNumber

Column	Syntax	OID
apNativeVlanIfIndex Interface Index of the wireless interface for which the VLAN is assigned to.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.11.6.1.1
apNativeVlanSsidNumber Associated Number for Service Set Id (SSID) of the wireless interface for which the VLAN is assigned to. Note: This is for future support of multiple SSIDs per radio interface.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.11.6.1.2
apNativeVlanVlanId This value indicates the native VLAN Id of the wireless interface associated with the if index and the SSID number(if it is not 0).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.11.6.1.3
apNativeVlanState This value indicates the Native VLANs state.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.11.6.1.4

Table of descriptive and status information about
configuration of each authentication server.

apAuthenticationServerEntry row .1.3.6.1.4.1.52.4.13.12.2.1

An entry in the table, containing information
about configuration of one authentication server of the AP.

Indexes

apAuthenticationServerIndex

Column	Syntax	OID
apAuthenticationServerIndex Index of the Authentication Server	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.12.2.1.1
apAuthenticationServer This value indicates the IP address or host name of the authentication server.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.52.4.13.12.2.1.2
apAuthenticationPort This value indicates the UDP Port used by the authentication server.	Integer32r/w Constraints: range: 1024-65535	.1.3.6.1.4.1.52.4.13.12.2.1.3
apAuthenticationKey This value indicates the shared key used by the authentication server.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.52.4.13.12.2.1.4
apAuthenticationRetransmit This value indicates the retransmit timer length used by the authentication server.	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.52.4.13.12.2.1.5
apAuthenticationTimeout This value indicates the Timeout value(sec) used by the authentication server.	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.52.4.13.12.2.1.6
apAuthenticationAcctPort UDP Accounting Port. The valid range is from 1024-65535. A value of 0 means accounting is disabled.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.13.12.2.1.7
apAuthenticationAcctInterimUpdate The interval between sending accounting updates.	Integer32r/w Constraints: range: 60-86400	.1.3.6.1.4.1.52.4.13.12.2.1.8
apAuthenticationAcctState This value indicates whether the Accounting Server is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.12.2.1.9

Table of descriptive and status information about
configuration of supplicant

apAuthenticationSupplicantEntry row .1.3.6.1.4.1.52.4.13.12.3.1

An entry in the table, containing information
about configuration of one supplicant.

Indexes

ap8021xSuppIndex

Column	Syntax	OID
ap8021xSuppIndex Index of the interface for which this supplicant is running. Currently only the ethernet interface.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.12.3.1.1
ap8021xSuppState This object is used to enable or disable the 802.1X supplicant.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.52.4.13.12.3.1.2
ap8021xSuppUser This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.52.4.13.12.3.1.3
ap8021xSuppPasswd This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.52.4.13.12.3.1.4

Table of descriptive and status information about
configuration of 8021x for each Vap.

apvAuthenticationSetupEntry row .1.3.6.1.4.1.52.4.13.12.4.1

An entry in the table, containing information
about configuration of 8021x for each Vap of the AP.

Indexes

apv8021xIndex

Column	Syntax	OID
apv8021xIndex Index for configuration.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.12.4.1.1
apv8021xState This attribute indicates that the Enterprise the state of the 802.1X authentication algorithm.	Enumerationr/w Enumerated Values: 0 disabled 1 supported 2 required	.1.3.6.1.4.1.52.4.13.12.4.1.2
apv8021xBroadcastKeyRefreshRate The number (in minutes) between changing the broadcast key for 802.1X and WPA clients	Integer32r/w Constraints: range: 0-1440	.1.3.6.1.4.1.52.4.13.12.4.1.3
apv8021xSessionKeyRefreshRate The number (in minutes) between changing history keys for 802.1X and WPA clients	Integer32r/w Constraints: range: 0-1440	.1.3.6.1.4.1.52.4.13.12.4.1.4
apv8021xReauthenticationTimeout The number (in minutes) between forcing 802.1X clients to reauthenticate	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.13.12.4.1.5
apvMACAuthenticationMode This value indicates the mode of MAC authentication in use.	Enumerationr/w Enumerated Values: 0 disabled 1 local 2 remote	.1.3.6.1.4.1.52.4.13.12.4.1.6
apvMACAuthenticationTimeout The number (in minutes) between forcing RADIUS MAC to authenticate.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.13.12.4.1.7
apvMACAuthenticationPasswd This value indicates the password for MAC RADIUS Authentication. If value is configured, will display ****. Else will display EMPTY.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.52.4.13.12.4.1.8

This table list all sessions (wireless stations) status

apWStationSessionEntry row .1.3.6.1.4.1.52.4.13.13.1.1

An entry in the table, containing information
about status and statistics of the wireless station.

Indexes

apWStationSessionIfIndex apWStationSessionStationAddres

Column	Syntax	OID
apWStationSessionIfIndex Interface index for the radio this session is associated with.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.52.4.13.13.1.1.1
apWStationSessionStationAddres The unique MAC Address of the station for this session.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.52.4.13.13.1.1.2
apWStationSessionAuthenticated Whether the session is authenticated or not.	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.52.4.13.13.1.1.3
apWStationSessionAssociated Whether the session is associated or not. It is rare case that not associated stations show up in the table.	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.52.4.13.13.1.1.4
apWStationSessionIsForwarding Whether the AP is forwarding the client station traffic (higher level authentication)	TruthValue Type Values: 1 true 2 false	.1.3.6.1.4.1.52.4.13.13.1.1.5
apWStationSessionKeyType The encryption key type used by the station. Note that wpa-wep is not supported	Enumeration Enumerated Values: 1 none 2 staticWep 3 dynamicWep 4 wpaWep 5 wpaTkip 6 wpaAes	.1.3.6.1.4.1.52.4.13.13.1.1.6
apWStationSessionAssociationId The internal association identify number	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.13.1.1.7
apWStationSessionLastAuthenticatedTime This is the time in hundredths of a second last time the client is authenticated. Note that a session may be authenticated multiple times. The value is related to the system startup	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.8
apWStationSessionAssociatedTime This is the time in hundredths of a second since the client associated. The value is related to the system startup	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.9
apWStationSessionLastAssociatedTime This is the time in hundredths of a second when the client associated in last session. The value is related to the system startup	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.10
apWStationSessionLastDisassociatedTime This is the time in hundredths of a second when the client disassociated in last session. The value is related to the system startup	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.11
apWStationSessionTxPacketCount This is the number of packets transmitted from the client to the AP. It includes data, control and management packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.12
apWStationSessionRxPacketCount This is the number of unicast packets transmitted from the AP to the client. It includes data, control and management packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.13
apWStationSessionTxByteCount This is the number of bytes transmitted from the client to the AP. It includes the bytes of data, control and management packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.14
apWStationSessionRxByteCount This is the number of unicast bytes transmitted from the AP to the client. It includes the bytes of data, control and management packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.13.13.1.1.15
apWStationSessionVlanID The current VLAN Id used by the station.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.13.1.1.16

Table of each AP that has been detected.

rogueApDetectionEntry row .1.3.6.1.4.1.52.4.13.14.1.1

An entry in the table, containing information
about any AP detected.

Indexes

rogueApIndex

Column	Syntax	OID
rogueApIndex Monotonically increasing index.	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.52.4.13.14.1.1.1
rogueApBssid The AP BSSID	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.52.4.13.14.1.1.2
rogueApSsid The AP SSID	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.52.4.13.14.1.1.3
rogueApPortNumber Interface index for the radio.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.14.1.1.4
rogueApChannelNumber Channel where Ap detected.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.14.1.1.5
rogueApRSSIValue RSSI for AP detected.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.13.14.1.1.6

Table of descriptive and status information about
configuration of each syslog server.

apSyslogServerEntry row .1.3.6.1.4.1.52.4.13.20.4.1

An entry in the table, containing information
about configuration of one syslog server of the AP.

Indexes

apSyslogServerIndex

Column	Syntax	OID
apSyslogServerIndex Index of the Syslog Server	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.52.4.13.20.4.1.1
apSyslogServerState This value indicates whether the syslog server is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.13.20.4.1.2
apSyslogServerIPAddress This value indicates the IP address of the syslog server.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.52.4.13.20.4.1.3
apSyslogServerPort This value indicates the UDP Port used by the syslog server.	Integer32r/w Constraints: range: 1024-65535	.1.3.6.1.4.1.52.4.13.20.4.1.4

This table is a snapshot of the current event log.

apEventLogEntry row .1.3.6.1.4.1.52.4.13.21.1.1

An entry in the table, containing one message
from the event log.

Indexes

apEventLogIndex

Column	Syntax	OID
apEventLogIndex Index of the Event Log Message	Integer32 Constraints: range: 1-128	.1.3.6.1.4.1.52.4.13.21.1.1.1
apEventLogMessage The Event Log Message	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.52.4.13.21.1.1.2

Table for WMM configuration per radio.

apWMMControlEntry row .1.3.6.1.4.1.52.4.13.23.1.1

An Entry in the apWMMControlTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
apWMMState This value indicates the WMM state.	Enumerationr/w Enumerated Values: 0 disabled 1 required 2 supported	.1.3.6.1.4.1.52.4.13.23.1.1.1

Conceptual table for EDCA default parameter values at a non-AP
QSTA. This table shall contain the four entries of the EDCA
parameters corresponding to four possible ACs (access category):
    1) AC_BE (best effort, ACI=0)
    2) AC_BK (background, ACI=1)
    3) AC_VI (video, ACI=2)
    4) AC_VO (voice, ACI=3)

apWMMBssParamEntry row .1.3.6.1.4.1.52.4.13.23.2.1

An Entry (conceptual row) in the apWMMBssParamTable.
ifIndex - Each IEEE 802.11 interface is represented by an ifEntry.
Interface tables in this MIB module are indexed by ifIndex.

Indexes

RFC1213-MIBifIndex apWMMBssParamIndex

Column	Syntax	OID
apWMMBssParamIndex The index used to identify instances of the columnar objects in the apWMMBssParam Table. The value of this variable is 1) 1 AC_BE (best effort, ACI=0) 2) 2 AC_BK (background, ACI=1) 3) 3 AC_VI (video, ACI=2)…	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.52.4.13.23.2.1.1
apWMMBssParamCWmin This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.13.23.2.1.2
apWMMBssParamCWmax This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.13.23.2.1.3
apWMMBssParamAIFSN This attribute shall specify the number of slots, after a SIFS duration, that the QSTA, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.13.23.2.1.4
apWMMBssParamTXOPLimit This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a non-AP QSTA.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.13.23.2.1.5
apWMMBssParamAdmissionControl This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this pa…	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.52.4.13.23.2.1.6

Conceptual table for EDCA default parameter values at the QAP.
This table shall contain the four entries of the EDCA
parameters corresponding to four possible ACs (access category):
    1) AC_BE (best effort, ACI=0)
    2) AC_BK (background, ACI=1)
    3) AC_VI (video, ACI=2)
    4) AC_VO (voice, ACI=3)

apWMMApParamEntry row .1.3.6.1.4.1.52.4.13.23.3.1

An Entry (conceptual row) in the apWMMApParamTable.
ifIndex - Each IEEE 802.11 interface is represented by an ifEntry.
Interface tables in this MIB module are indexed by ifIndex.

Indexes

RFC1213-MIBifIndex apWMMApParamIndex

Column	Syntax	OID
apWMMApParamIndex The index used to identify instances of the columnar objects in the apWMMApParam Table. The value of this variable is 1) 1 AC_BE (best effort, ACI=0) 2) 2 AC_BK (background, ACI=1) 3) 3 AC_VI (video, ACI=2) …	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.52.4.13.23.3.1.1
apWMMApParamCWmin This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.13.23.3.1.2
apWMMApParamCWmax This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.13.23.3.1.3
apWMMApParamAIFSN This attribute shall specify the number of slots, after a SIFS duration, that the QAP, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff.	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.13.23.3.1.4
apWMMApParamTXOPLimit This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a QAP.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.13.23.3.1.5
apWMMApParamAdmissionControl This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this pa…	TruthValuer/w Type Values: 1 true 2 false	.1.3.6.1.4.1.52.4.13.23.3.1.6