CT-FASTPATH-DHCPSNOOPING-MIB Table View

A table provides the mechanism to control DHCP SNOOPING
per VLAN. When a VLAN is created in a device
supporting this table, a corresponding entry of this table
will be added.

ctAgentDhcpSnoopingVlanConfigEntry row .1.3.6.1.4.1.52.4.2.35.1.1.3.1

A row instance contains the configuration for DHCP
SNOOPING at each existing VLAN.

Indexes

ctAgentDhcpSnoopingVlanIndex

Column	Syntax	OID
ctAgentDhcpSnoopingVlanIndex This object indicates the VLAN number on which DHCP SNOOPING Inspection feature is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.52.4.2.35.1.1.3.1.1
ctAgentDhcpSnoopingVlanEnable This object indicates whether DHCP SNOOPING is enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false', DHCP SNOOPING is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.2.35.1.1.3.1.2

A table provides the mechanism to configure the trust
state for DHCP snooping purpose at each physical
interface capable of this feature.

ctAgentDhcpSnoopingIfConfigEntry row .1.3.6.1.4.1.52.4.2.35.1.1.4.1

A row instance contains the configuration for
DHCP snooping at each physical interface capable of this feature.

Indexes

IF-MIBifIndex

Column	Syntax	OID
ctAgentDhcpSnoopingIfTrustEnable This object indicates whether the interface is trusted for DHCP snooping purpose.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.2.35.1.1.4.1.1
ctAgentDhcpSnoopingIfLogEnable This object indicates whether the Logging needs on DHCP snooping validations or not	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.2.35.1.1.4.1.2
ctAgentDhcpSnoopingIfRateLimit This object indicates rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, DHCP packets will be dropped.	packets per secondUnsigned32r/w Constraints: range: 0-300	.1.3.6.1.4.1.52.4.2.35.1.1.4.1.3
ctAgentDhcpSnoopingIfBurstInterval This object indicates the burst interval value for rate limiting purpose on this interface.	Unsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.52.4.2.35.1.1.4.1.4

A table provides the mechanism for statics of DHCP snooping.

ctAgentDhcpSnoopingStatsEntry row .1.3.6.1.4.1.52.4.2.35.1.1.7.1

A row instance contains the DHCP snooping statistics per VLAN.

Indexes

IF-MIBifIndex

Column	Syntax	OID
ctAgentDhcpSnoopingMacVerifyFailures This object indicates the number of failure verifications of client mac address with source mac address	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.35.1.1.7.1.1
ctAgentDhcpSnoopingInvalidClientMessages This object indicates the number of invalid DHCP releases and denay messages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.35.1.1.7.1.2
ctAgentDhcpSnoopingInvalidServerMessages This object indicates the number of invalid DHCP server mesaages	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.2.35.1.1.7.1.3

A table of the DHCP SNOOPING static entries

ctAgentStaticDsBinding row .1.3.6.1.4.1.52.4.2.35.1.1.10.1

Represents a binding in DHCP SNOOPING table

Indexes

ctAgentStaticDsBindingMacAddr

Column	Syntax	OID
ctAgentStaticDsBindingIfIndex Interface on which this DHCP SNOOPING binding is going to be added.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52.4.2.35.1.1.10.1.1
ctAgentStaticDsBindingVlanId VLAN to whcig this DHCP SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.52.4.2.35.1.1.10.1.2
ctAgentStaticDsBindingMacAddr MAC address match value for the DHCP SNOOPING Binding.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52.4.2.35.1.1.10.1.3
ctAgentStaticDsBindingIpAddr IP address match value for the DHCP SNOOPING Binding.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.35.1.1.10.1.4
ctAgentStaticDsBindingRowStatus The status of this conceptual row. active(1) - this DHCP SNOOPING Binding is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.2.35.1.1.10.1.5

A table of the DHCP SNOOPING Dynamic entries

ctAgentDynamicDsBinding row .1.3.6.1.4.1.52.4.2.35.1.1.11.11

Represents a binding in DHCP SNOOPING table

Indexes

ctAgentDynamicDsBindingMacAddr

Column	Syntax	OID
ctAgentDynamicDsBindingIfIndex Interface on which this DHCP SNOOPING binding is going to be added.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.52.4.2.35.1.1.11.11.1
ctAgentDynamicDsBindingVlanId VLAN to whcig this DHCP SNOOPING binding is going to be added.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.52.4.2.35.1.1.11.11.2
ctAgentDynamicDsBindingMacAddr MAC address match value for the DHCP SNOOPING Binding.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.52.4.2.35.1.1.11.11.3
ctAgentDynamicDsBindingIpAddr IP address match value for the DHCP SNOOPING Binding.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.2.35.1.1.11.11.4