CT-ELS100-MIB Table View

A list of the software file sets stored. The first
file set refers to the one that was used when ELS-100
last booted. The second file set refers to the one
which will be used when ELS-100 reboots or reloads any
hardware module.

kxswFilesetEntry row .1.3.6.1.4.1.97.8.2.2.1

A set of objects for each file set.

Indexes

No indexes recorded

Column	Syntax	OID
kxswIndexmandatory The file set number, beginning with 1 for the first file set. This number always matches the instance of the swFiles. For example, {swIndex 2} contains the value '2'.	Enumeration	.1.3.6.1.4.1.97.8.2.2.1.1
kxswDescmandatory The description (0-255 bytes) of the software file set.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.97.8.2.2.1.2
kxswCountmandatory The number of files in the file set. This number may range from 1 to 255.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.2.2.1.3
kxswTypemandatory The types of the files within the file set.	OctetString	.1.3.6.1.4.1.97.8.2.2.1.4
kxswSizesmandatory An array (4 octets per file), containing the size of each of the files. Each size is encoded as a series of 4 bytes, which should be converted into a 32 bit integer.	OctetString	.1.3.6.1.4.1.97.8.2.2.1.5
kxswStartsmandatory An array (4 octets per file), containing the software's execution starting address of each of the files. Each address is encoded as a series of 4 bytes, which should be converted into a 32 bit integer.	OctetString	.1.3.6.1.4.1.97.8.2.2.1.6
kxswBasesmandatory An array (4 octets per file), containing the software's base loading address of each of the files. Each address is encoded as a series of 4 bytes, which should be converted into a 32 bit integer.	OctetString	.1.3.6.1.4.1.97.8.2.2.1.7
kxswFlashBankmandatory The bank number where the software file set resides.	Enumeration	.1.3.6.1.4.1.97.8.2.2.1.8

A list of interface entries; one per port.

kxifEntry row .1.3.6.1.4.1.97.8.6.1.1

A set of objects for an interface entry.

Indexes

No indexes recorded

Column	Syntax	OID
kxifIndexmandatory The port number, beginning with 1 for the first port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.1
kxifRxCntmandatory The number of small data buffers for receiving packets.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.2
kxifTxCntmandatory The maximum size of the port's transmit queue, i.e., the number of packets that can be in the port's transmit queue, waiting to be transmitted.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.3
kxifThresholdmandatory Maximum number of combined receive and transmit packet hardware errors before an alarm should be generated.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.4
kxifThresholdTimemandatory The time period (in seconds) to which kxifThreshold applies. A value of zero will disable the kxifThreshold alarm.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.5
kxifRxQueueThreshmandatory Maximum number of receive packet queue overflow errors before an alarm should be generated.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.6
kxifRxQueueThreshTimemandatory The time period (in seconds) to which kxifRxQueueThresh applies. A value of zero will disable the kxifRxQueueThresh alarm.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.7
kxifFunctionmandatory The current functional state (protocols which have been activated and are operational) of the port. The following values or combinations are supported: 0x0001 NMS, 0x0002 TBRIDGE, 0x0020 UNIT_NO_BPDU 0x0040…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.6.1.1.8
kxifStatisticsTimemandatory Length of time during which statistics were collected.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.8.6.1.1.9

A list of interface entries; one per UART port.

kxuartEntry row .1.3.6.1.4.1.97.8.7.1.1

A set of objects for an interface entry.

Indexes

No indexes recorded

Column	Syntax	OID
kxuartIndexmandatory The ELS-100's port number of the port.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.7.1.1.1
kxuartBaudmandatory This is the desired baud rate. Only 1200 baud through 19,200 baud are supported by the ELS-100.	Enumerationr/w	.1.3.6.1.4.1.97.8.7.1.1.2
kxuartAlignmentErrorsmandatory Number of received packets with frame alignment errors, since the port was last enabled.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.8.7.1.1.3
kxuartOverrunErrorsmandatory Number of received packets with data overrun errors, since the port was last enabled.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.8.7.1.1.4

This table contains configuration information
specifying the types of protocols used to bridge
and filter frames for each port.

kxprotoEntry row .1.3.6.1.4.1.97.8.8.1.1

Each entry in this table specifies which protocols are
used by a particular port in the SmartStack.

Indexes

No indexes recorded

Column	Syntax	OID
kxprotoIfIndexmandatory Identifies the interface (port) to which this entry's information belongs. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.8.1.1.1
kxprotoBridgemandatory Defines the bridging method to be applied to frames received at, or destined for, this port. Ports may be configured for transparent or none. The UART may only be configured to none.	Enumerationr/w	.1.3.6.1.4.1.97.8.8.1.1.2
kxprotoSuppressBpdumandatory Allows transmission of spanning tree protocol packets to be suppressed. If normal(1), 802.1d spanning tree packets are transmitted as usual. If suppressed(2), these packets are not transmitted. This option may be neede…	Enumerationr/w	.1.3.6.1.4.1.97.8.8.1.1.3
kxprotoRipListenmandatory Specifies whether the port should listen for internet Routing Information Protocol (RFC-1058) packets, in order to build the routing table for the unit.	Enumerationr/w	.1.3.6.1.4.1.97.8.8.1.1.4
kxprotoTrunkingmandatory Specifies whether SmartStack trunking protocol (an extension to the standard Spanning Tree) is to be used over this port.	Enumerationr/w	.1.3.6.1.4.1.97.8.8.1.1.5

This table describes the trunking status and attributes of
the interfaces that are configured for bridge trunking.

kxtrunkEntry row .1.3.6.1.4.1.97.8.9.1.1

An entry exists in this table for each physical interface
(port) that is configured for trunking.

Indexes

No indexes recorded

Column	Syntax	OID
kxtrunkIfIndexmandatory Identifies a physical interface (port) which is configured for LAN trunking. The value of this variable corresponds to ifIndex, as well as most of the other port identification values in related MIBs.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.9.1.1.1
kxtrunkStatemandatory If off(1) then this link has not been enabled for trunking. If closed(2) then this link has not yet received any Trunking PDUs. If oneway(3) then incoming Trunking PDUs do not indicate that our PDUs are being successful…	Enumeration	.1.3.6.1.4.1.97.8.9.1.1.2
kxtrunkRemoteBridgeAddrmandatory The MAC address portion of the bridge ID of the remote bridge.	OctetString	.1.3.6.1.4.1.97.8.9.1.1.3
kxtrunkRemoteIpmandatory The IP address of the remote bridge, as reported by that bridge for administrative purposes.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.97.8.9.1.1.4
kxtrunkLastErrormandatory The last reason for failure when the link is in closed, oneway, or helddown state.	Enumeration	.1.3.6.1.4.1.97.8.9.1.1.5
kxtrunkLinkOrdinalmandatory The position of this link within the trunk group.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.9.1.1.6
kxtrunkLinkCountmandatory The number of links within the trunk group.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.9.1.1.7
kxtrunkLastChangemandatory The number of seconds since kxtrunkState changed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.9.1.1.8

This table contains work group definitions for the
interfaces.

kxWorkGroupEntry row .1.3.6.1.4.1.97.8.10.4.1

Each entry in this table contains a definition of a
work group.

Indexes

No indexes recorded

Column	Syntax	OID
kxWorkGroupNumbermandatory An integer that identifies the work group, used as an index to this table.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.10.4.1.1
kxWorkGroupNamemandatory A 1-16 character work group name.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.97.8.10.4.1.2
kxWorkGroupPortsmandatory A list of all ports within the group. The first octet specified ports 1-8, the second 9-16, etc.	OctetStringr/w	.1.3.6.1.4.1.97.8.10.4.1.3
kxWorkGroupTypemandatory The type of work group: all - no additional information needs to be supplied.	Enumerationr/w	.1.3.6.1.4.1.97.8.10.4.1.4

This table contains information about the severity of
each trap and whether the trap is currently enabled.

kxtrapControlEntry row .1.3.6.1.4.1.97.8.11.1.1

Indexes

No indexes recorded

Column	Syntax	OID
kxtrapIndexmandatory The specific trap number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.11.1.1.1
kxtrapEnabledmandatory Enable or disable the generation of this trap.	Enumerationr/w	.1.3.6.1.4.1.97.8.11.1.1.2
kxtrapSeveritymandatory A user-definable severity, indicating the importance of the trap.	Enumerationr/w	.1.3.6.1.4.1.97.8.11.1.1.3
kxtrapTextmandatory A description of the trap.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.97.8.11.1.1.4

This table contains information about whether a class
of traps of a particular severity is enabled or
disabled.

kxtrapSeverityControlEntry row .1.3.6.1.4.1.97.8.11.2.1

Indexes

No indexes recorded

Column	Syntax	OID
kxtrapSeverityControlSeveritymandatory A user-definable severity, indicating the importance of the trap.	Enumerationr/w	.1.3.6.1.4.1.97.8.11.2.1.1
kxtrapSeverityEnablemandatory Enable or disable all traps of a given severity level.	Enumerationr/w	.1.3.6.1.4.1.97.8.11.2.1.2

This table contains the latest traps that have been
generated.

kxtrapEntry row .1.3.6.1.4.1.97.8.11.7.1

Indexes

No indexes recorded

Column	Syntax	OID
kxtrapEntryIndexmandatory A number representing the order in which the trap occurred in time. This 32 bit number can wrap.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.11.7.1.1
kxtrapEntryTimeStampmandatory The time at which the trap occurred.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.97.8.11.7.1.2
kxtrapEntryTextmandatory A description of the trap.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.97.8.11.7.1.3
kxtrapEntryNumbermandatory The specific trap number, as specified in the TRAP PDU.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.97.8.11.7.1.4
kxtrapEntrySeveritymandatory A user-definable severity, indicating the importance of the trap.	Enumeration	.1.3.6.1.4.1.97.8.11.7.1.5