CT-DAWANCONN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
18

daWanConnectionTable

table mandatory
.1.3.6.1.4.1.52.4497.17.2 · 1 row entry · 18 columns
Open in standard view
Uses the cabletron variant from /opt/observium/mibs/cabletron.
Command help
Walk daWanConnectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CT-DAWANCONN-MIB' -M '/opt/observium/mibs/cabletron:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CT-DAWANCONN-MIB::daWanConnectionTable' 
A list of Demand Access remote WAN connections
daWanConnectionEntry row .1.3.6.1.4.1.52.4497.17.2.1
An entry containing wan connection information
and statistics.
Indexes
Column Syntax OID
daWanConnectionIndexmandatory
This is the index into this table. This index
uniquely identifies the Connection.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.52.4497.17.2.1.1
daWanConnectionIfIndexmandatory
This is the ifIndex value of the wan connection group.
If the ifIndex value is unknown, the value of this object
will be zero.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4497.17.2.1.2
daWanConnectionStatemandatory
This is the state of the Connection.
Enumeration
Enumerated Values:
1inactive
2connecting
3connected
4active
5disconnecting
6disconnected
 .1.3.6.1.4.1.52.4497.17.2.1.3
daWanConnectionConnectControlmandatory
This object controls the desired state of the wan Connection.
Setting this object to connect(1) will initiate the
set of actions to bring the wan Connection to the active
state. Only set the object to connect(1) wh…
Enumerationr/w
Enumerated Values:
1connect
2disconnect
3unknown
 .1.3.6.1.4.1.52.4497.17.2.1.4
daWanConnectionConnectTypemandatory
This specifies the type of the wan connection.
Enumeration
Enumerated Values:
1digitalCircuit
2analogCircuit
 .1.3.6.1.4.1.52.4497.17.2.1.5
daWanConnectionDeviceIndexmandatory
This is the index of the device that is associated with this connection.
This value will be zero if there is no device associated with this device.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4497.17.2.1.6
daWanConnectionConnectSpeedmandatory
The information transfer speed in bits/second when calling
this peer. The detailed media specific information, e.g. information
type and information transfer rate for ISDN circuits, has to be
extracted from this objec…
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4497.17.2.1.7
daWanConnectionLocalAddressmandatory
Call Address at which the connection will originate from. Think of this
as the set of characters following 'ATDT ' or the 'phone number' included in
a D channel call request. The structure of this information will be…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4497.17.2.1.8
daWanConnectionPeerAddressmandatory
Calling Party Number information element, as for example passed in an
ISDN SETUP message by a PBX or switch, for incoming calls. This address
can be used to identify the peer. If this address is either unknown or
id…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4497.17.2.1.9
daWanConnectionSubAddressmandatory
Subaddress at which the connection will originate from. If the subaddress is
undefined for the given media or unused, then the value is zero.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4497.17.2.1.10
daWanConnectionInfoTypemandatory
The Information Transfer Capability to be used for this connection.
speech(2) refers to a non-data connection, whereas audio31(6) and
audio7(7) refer to data mode connections.
Enumeration
Enumerated Values:
1other
2speech
3unrestrictedDigital
4unrestrictedDigital56
5restrictedDigital
6audio31
7audio7
8video
9packetSwitched
10fax
 .1.3.6.1.4.1.52.4497.17.2.1.11
daWanConnectionChargedUnitsmandatory
The number of charged units for this connection. For incoming calls or
if charging information is not supplied by the switch, the value of
this object will be zero.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4497.17.2.1.12
daWanConnectionConnectTimemandatory
The value of sysUpTime when this connection was completed. This
object will be updated whenever a call is completed.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.52.4497.17.2.1.13
daWanConnectionConnectDirectionmandatory
The direction from which this connect occurred.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.52.4497.17.2.1.14
daWanConnectionDisconnectTimemandatory
The value of sysUpTime when this call was disconnected. This object
will be updated whenever a call is disconnected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.52.4497.17.2.1.15
daWanConnectionDisconnectDirectionmandatory
The direction from which this disconnect occurred.
Enumeration
Enumerated Values:
1in
2out
 .1.3.6.1.4.1.52.4497.17.2.1.16
daWanConnectionDisconnectCausemandatory
The encoded network cause value associated with this call. This object
will be updated whenever a call is started or cleared. The value of this
object will depend on the interface type as well as on the protocol and …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4497.17.2.1.17
daWanConnectionDisconnectTextmandatory
ASCII text describing the reason for this call termination. This object
exists because it would be impossible for a management station to store all
possible cause values for all types of interfaces. It should be use…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.52.4497.17.2.1.18