CS141-MIB

Monitored by Observium

        The MIB module to describe Uninterruptible Power
Supplies. This version is extended for DIOAD.

Observium actively monitors this MIB

Observium uses this MIB in discovery or polling workflows on applicable devices.

Device identity Status

Explore Observium network monitoring

Source file: CS141-MIB
Last revised: 24 May 1995, 18:11 UTC
Identity: upsMIB
Base OID: 1.3.6.1.2.1.33

Imported Objects

SNMPv2-CONF	MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	Counter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	AutonomousType DisplayString TestAndIncr TEXTUAL-CONVENTION (no object page) TimeInterval TimeStamp

Net-SNMP examples using the generex MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CS141-MIB' -M '/opt/observium/mibs/generex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CS141-MIB::upsMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CS141-MIB' -M '/opt/observium/mibs/generex:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CS141-MIB::upsMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (597)

10 directly used by Observium

upsMIB		`.1.3.6.1.2.1.33`
upsObjects		`.1.3.6.1.2.1.33.1`
upsIdent		`.1.3.6.1.2.1.33.1.1`
upsIdentManufacturer	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.1`
upsSnmpAdapterSerialNr OBS ✓	NonNegativeInteger	`.1.3.6.1.2.1.33.1.1.10`
upsIdentModel	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.2`
upsIdentUPSSoftwareVersion	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.3`
upsIdentAgentSoftwareVersion	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.4`
upsIdentName r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.5`
upsIdentAttachedDevices r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.6`
upsSerialNumber	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.7`
upsLocation r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.8`
upsSystemContact r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.1.9`
sitemanager		`.1.3.6.1.2.1.33.1.10`
relais		`.1.3.6.1.2.1.33.1.10.1`
relais1 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.1`
relais2 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.2`
relais3 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.3`
relais4 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.4`
relais5 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.5`
relais6 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.6`
relais7 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.7`
relais8 r/w	Enumeration	`.1.3.6.1.2.1.33.1.10.1.8`
digital		`.1.3.6.1.2.1.33.1.10.2`
digital1	Enumeration	`.1.3.6.1.2.1.33.1.10.2.1`
digital2	Enumeration	`.1.3.6.1.2.1.33.1.10.2.2`
digital3	Enumeration	`.1.3.6.1.2.1.33.1.10.2.3`
digital4	Enumeration	`.1.3.6.1.2.1.33.1.10.2.4`
digital5	Enumeration	`.1.3.6.1.2.1.33.1.10.2.5`
digital6	Enumeration	`.1.3.6.1.2.1.33.1.10.2.6`
digital7	Enumeration	`.1.3.6.1.2.1.33.1.10.2.7`
digital8	Enumeration	`.1.3.6.1.2.1.33.1.10.2.8`
analog		`.1.3.6.1.2.1.33.1.10.3`
analog1	degrees centigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.1`
analog4	Humidity in per milSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.10`
analog4Min r/w	Humidity in per milSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.11`
analog4Max r/w	Humidity in per milSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.12`
analog5	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.13`
analog5Min r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.14`
analog5Max r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.15`
analog6	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.16`
analog6Min r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.17`
analog6Max r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.18`
analog7	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.19`
analog1Min r/w	degrees centigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.2`
analog7Min r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.20`
analog7Max r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.21`
analog8	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.22`
analog8Min r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.23`
analog8Max r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.24`
analog1Max r/w	degrees centigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.3`
analog2	degrees centigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.4`
analog2Min r/w	degrees centigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.5`
analog2Max r/w	degrees centigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.6`
analog3	Humidity in per milSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.7`
analog3Min r/w	Humidity in per milSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.8`
analog3Max r/w	Humidity in per milSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.10.3.9`
marker		`.1.3.6.1.2.1.33.1.10.4`
marker1	Enumeration	`.1.3.6.1.2.1.33.1.10.4.1`
marker2	Enumeration	`.1.3.6.1.2.1.33.1.10.4.2`
marker3	Enumeration	`.1.3.6.1.2.1.33.1.10.4.3`
marker4	Enumeration	`.1.3.6.1.2.1.33.1.10.4.4`
marker5	Enumeration	`.1.3.6.1.2.1.33.1.10.4.5`
marker6	Enumeration	`.1.3.6.1.2.1.33.1.10.4.6`
marker7	Enumeration	`.1.3.6.1.2.1.33.1.10.4.7`
marker8	Enumeration	`.1.3.6.1.2.1.33.1.10.4.8`
siteMonitor		`.1.3.6.1.2.1.33.1.10.5`
siteMonitor1	Enumeration	`.1.3.6.1.2.1.33.1.10.5.1`
siteMonitor10	Enumeration	`.1.3.6.1.2.1.33.1.10.5.10`
siteMonitor11	Enumeration	`.1.3.6.1.2.1.33.1.10.5.11`
siteMonitor12	Enumeration	`.1.3.6.1.2.1.33.1.10.5.12`
siteMonitor13	Enumeration	`.1.3.6.1.2.1.33.1.10.5.13`
siteMonitor14	Enumeration	`.1.3.6.1.2.1.33.1.10.5.14`
siteMonitor15	Enumeration	`.1.3.6.1.2.1.33.1.10.5.15`
siteMonitor16	Enumeration	`.1.3.6.1.2.1.33.1.10.5.16`
siteMonitor17	Enumeration	`.1.3.6.1.2.1.33.1.10.5.17`
siteMonitor18	Enumeration	`.1.3.6.1.2.1.33.1.10.5.18`
siteMonitor19	Enumeration	`.1.3.6.1.2.1.33.1.10.5.19`
siteMonitor2	Enumeration	`.1.3.6.1.2.1.33.1.10.5.2`
siteMonitor20	Enumeration	`.1.3.6.1.2.1.33.1.10.5.20`
siteMonitor21	Enumeration	`.1.3.6.1.2.1.33.1.10.5.21`
siteMonitor22	Enumeration	`.1.3.6.1.2.1.33.1.10.5.22`
siteMonitor23	Enumeration	`.1.3.6.1.2.1.33.1.10.5.23`
siteMonitor24	Enumeration	`.1.3.6.1.2.1.33.1.10.5.24`
siteMonitor25	Enumeration	`.1.3.6.1.2.1.33.1.10.5.25`
siteMonitor26	Enumeration	`.1.3.6.1.2.1.33.1.10.5.26`
siteMonitor27	Enumeration	`.1.3.6.1.2.1.33.1.10.5.27`
siteMonitor28	Enumeration	`.1.3.6.1.2.1.33.1.10.5.28`
siteMonitor29	Enumeration	`.1.3.6.1.2.1.33.1.10.5.29`
siteMonitor3	Enumeration	`.1.3.6.1.2.1.33.1.10.5.3`
siteMonitor30	Enumeration	`.1.3.6.1.2.1.33.1.10.5.30`
siteMonitor31	Enumeration	`.1.3.6.1.2.1.33.1.10.5.31`
siteMonitor32	Enumeration	`.1.3.6.1.2.1.33.1.10.5.32`
siteMonitor33	Enumeration	`.1.3.6.1.2.1.33.1.10.5.33`
siteMonitor34	Enumeration	`.1.3.6.1.2.1.33.1.10.5.34`
siteMonitor35	Enumeration	`.1.3.6.1.2.1.33.1.10.5.35`
siteMonitor36	Enumeration	`.1.3.6.1.2.1.33.1.10.5.36`
siteMonitor37	Enumeration	`.1.3.6.1.2.1.33.1.10.5.37`
siteMonitor38	Enumeration	`.1.3.6.1.2.1.33.1.10.5.38`
siteMonitor39	Enumeration	`.1.3.6.1.2.1.33.1.10.5.39`
siteMonitor4	Enumeration	`.1.3.6.1.2.1.33.1.10.5.4`
siteMonitor40	Enumeration	`.1.3.6.1.2.1.33.1.10.5.40`
siteMonitor41	Enumeration	`.1.3.6.1.2.1.33.1.10.5.41`
siteMonitor42	Enumeration	`.1.3.6.1.2.1.33.1.10.5.42`
siteMonitor43	Enumeration	`.1.3.6.1.2.1.33.1.10.5.43`
siteMonitor44	Enumeration	`.1.3.6.1.2.1.33.1.10.5.44`
siteMonitor45	Enumeration	`.1.3.6.1.2.1.33.1.10.5.45`
siteMonitor46	Enumeration	`.1.3.6.1.2.1.33.1.10.5.46`
siteMonitor47	Enumeration	`.1.3.6.1.2.1.33.1.10.5.47`
siteMonitor48	Enumeration	`.1.3.6.1.2.1.33.1.10.5.48`
siteMonitor49	Enumeration	`.1.3.6.1.2.1.33.1.10.5.49`
siteMonitor5	Enumeration	`.1.3.6.1.2.1.33.1.10.5.5`
siteMonitor50	Enumeration	`.1.3.6.1.2.1.33.1.10.5.50`
siteMonitor51	Enumeration	`.1.3.6.1.2.1.33.1.10.5.51`
siteMonitor52	Enumeration	`.1.3.6.1.2.1.33.1.10.5.52`
siteMonitor53	Enumeration	`.1.3.6.1.2.1.33.1.10.5.53`
siteMonitor54	Enumeration	`.1.3.6.1.2.1.33.1.10.5.54`
siteMonitor55	Enumeration	`.1.3.6.1.2.1.33.1.10.5.55`
siteMonitor56	Enumeration	`.1.3.6.1.2.1.33.1.10.5.56`
siteMonitor57	Enumeration	`.1.3.6.1.2.1.33.1.10.5.57`
siteMonitor58	Enumeration	`.1.3.6.1.2.1.33.1.10.5.58`
siteMonitor59	Enumeration	`.1.3.6.1.2.1.33.1.10.5.59`
siteMonitor6	Enumeration	`.1.3.6.1.2.1.33.1.10.5.6`
siteMonitor60	Enumeration	`.1.3.6.1.2.1.33.1.10.5.60`
siteMonitor61	Enumeration	`.1.3.6.1.2.1.33.1.10.5.61`
siteMonitor62	Enumeration	`.1.3.6.1.2.1.33.1.10.5.62`
siteMonitor63	Enumeration	`.1.3.6.1.2.1.33.1.10.5.63`
siteMonitor64	Enumeration	`.1.3.6.1.2.1.33.1.10.5.64`
siteMonitor7	Enumeration	`.1.3.6.1.2.1.33.1.10.5.7`
siteMonitor8	Enumeration	`.1.3.6.1.2.1.33.1.10.5.8`
siteMonitor9	Enumeration	`.1.3.6.1.2.1.33.1.10.5.9`
aux		`.1.3.6.1.2.1.33.1.11`
auxPort1 r/w	Enumeration	`.1.3.6.1.2.1.33.1.11.1`
auxPort2 r/w	Enumeration	`.1.3.6.1.2.1.33.1.11.2`
auxPort3 r/w	Enumeration	`.1.3.6.1.2.1.33.1.11.3`
auxPort4 r/w	Enumeration	`.1.3.6.1.2.1.33.1.11.4`
sensorMan		`.1.3.6.1.2.1.33.1.12`
sensor1		`.1.3.6.1.2.1.33.1.12.1`
sensorMan1Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.1.1`
sensorMan1Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.1.2`
sensorMan1Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.1.3`
sensorMan1ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.1.4`
sensorMan1ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.1.5`
sensorMan1Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.1.6`
sensorMan1Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.1.7`
input2		`.1.3.6.1.2.1.33.1.12.10`
input2Value	Enumeration	`.1.3.6.1.2.1.33.1.12.10.1`
input2Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.10.2`
input2NCContact	Enumeration	`.1.3.6.1.2.1.33.1.12.10.3`
input3		`.1.3.6.1.2.1.33.1.12.11`
input3Value r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.11.1`
input3Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.11.2`
input3NCContact r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.11.3`
input4		`.1.3.6.1.2.1.33.1.12.12`
input4Value	Enumeration	`.1.3.6.1.2.1.33.1.12.12.1`
input4Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.12.2`
input4NCContact r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.12.3`
output1		`.1.3.6.1.2.1.33.1.12.13`
output1Value r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.13.1`
output1Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.13.2`
output1NCContact r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.13.3`
output2		`.1.3.6.1.2.1.33.1.12.14`
output2Value r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.14.1`
output2Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.14.2`
output2NCContact r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.14.3`
output3		`.1.3.6.1.2.1.33.1.12.15`
output3Value r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.15.1`
output3Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.15.2`
output3NCContact r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.15.3`
output4		`.1.3.6.1.2.1.33.1.12.16`
output4Value r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.16.1`
output4Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.16.2`
output4NCContact r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.16.3`
sensor2		`.1.3.6.1.2.1.33.1.12.2`
sensorMan2Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.2.1`
sensorMan2Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.2.2`
sensorMan2Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.2.3`
sensorMan2ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.2.4`
sensorMan2ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.2.5`
sensorMan2Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.2.6`
sensorMan2Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.2.7`
sensor3		`.1.3.6.1.2.1.33.1.12.3`
sensorMan3Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.3.1`
sensorMan3Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.3.2`
sensorMan3Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.3.3`
sensorMan3ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.3.4`
sensorMan3ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.3.5`
sensorMan3Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.3.6`
sensorMan3Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.3.7`
sensor4		`.1.3.6.1.2.1.33.1.12.4`
sensorMan4Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.4.1`
sensorMan4Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.4.2`
sensorMan4Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.4.3`
sensorMan4ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.4.4`
sensorMan4ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.4.5`
sensorMan4Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.4.6`
sensorMan4Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.4.7`
sensor5		`.1.3.6.1.2.1.33.1.12.5`
sensorMan5Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.5.1`
sensorMan5Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.5.2`
sensorMan5Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.5.3`
sensorMan5ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.5.4`
sensorMan5ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.5.5`
sensorMan5Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.5.6`
sensorMan5Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.5.7`
sensor6		`.1.3.6.1.2.1.33.1.12.6`
sensorMan6Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.6.1`
sensorMan6Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.6.2`
sensorMan6Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.6.3`
sensorMan6ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.6.4`
sensorMan6ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.6.5`
sensorMan6Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.6.6`
sensorMan6Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.6.7`
sensor7		`.1.3.6.1.2.1.33.1.12.7`
sensorMan7Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.7.1`
sensorMan7Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.7.2`
sensorMan7Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.7.3`
sensorMan7ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.7.4`
sensorMan7ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.7.5`
sensorMan7Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.7.6`
sensorMan7Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.7.7`
sensor8		`.1.3.6.1.2.1.33.1.12.8`
sensorMan8Value	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.8.1`
sensorMan8Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.8.2`
sensorMan8Unit r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.8.3`
sensorMan8ThresholdLow r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.8.4`
sensorMan8ThresholdHigh r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.8.5`
sensorMan8Scaling r/w	0.01 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.8.6`
sensorMan8Offset r/w	0.1 unitsSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.12.8.7`
input1		`.1.3.6.1.2.1.33.1.12.9`
input1Value	Enumeration	`.1.3.6.1.2.1.33.1.12.9.1`
input1Location r/w	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.12.9.2`
input1NCContact r/w	Enumeration	`.1.3.6.1.2.1.33.1.12.9.3`
transferSwitch		`.1.3.6.1.2.1.33.1.13`
transferSwitchSource1On OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.1`
transferSwitchTemperature	degrees CentigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.13.10`
transferSwitchOutput		`.1.3.6.1.2.1.33.1.13.11`
transferSwitchOutputFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.11.1`
transferSwitchOutputNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.13.11.2`
transferSwitchOutputTable		`.1.3.6.1.2.1.33.1.13.11.3`
transferSwitchOutputEntry	transferSwitchOutputLineIndex	`.1.3.6.1.2.1.33.1.13.11.3.1`
transferSwitchOutputLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.13.11.3.1.1`
transferSwitchOutputVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.11.3.1.2`
transferSwitchOutputCurrent	0.1 RMS AmpNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.11.3.1.3`
transferSwitchOutputPower	WattsNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.11.3.1.4`
transferSwitchOutputPercentLoad	percentInteger32	`.1.3.6.1.2.1.33.1.13.11.3.1.5`
transferSwitchOutputApparentPower	VANonNegativeInteger	`.1.3.6.1.2.1.33.1.13.11.3.1.6`
transferSwitchSource1Input		`.1.3.6.1.2.1.33.1.13.12`
transferSwitchSource1InputNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.13.12.1`
transferSwitchSource1InputTable		`.1.3.6.1.2.1.33.1.13.12.2`
transferSwitchSource1InputEntry	transferSwitchSource1InputLineIndex	`.1.3.6.1.2.1.33.1.13.12.2.1`
transferSwitchSource1InputLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.13.12.2.1.1`
transferSwitchSource1InputFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.12.2.1.2`
transferSwitchSource1InputVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.12.2.1.3`
transferSwitchSource1Bypass		`.1.3.6.1.2.1.33.1.13.13`
transferSwitchSource1BypassFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.13.1`
transferSwitchSource1BypassNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.13.13.2`
transferSwitchSource1BypassTable		`.1.3.6.1.2.1.33.1.13.13.3`
transferSwitchSource1BypassEntry	transferSwitchSource1BypassLineIndex	`.1.3.6.1.2.1.33.1.13.13.3.1`
transferSwitchSource1BypassLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.13.13.3.1.1`
transferSwitchSource1BypassVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.13.3.1.2`
transferSwitchSource1BypassCurrent	0.1 RMS AmpNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.13.3.1.3`
transferSwitchSource2Input		`.1.3.6.1.2.1.33.1.13.14`
transferSwitchSource2InputNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.13.14.1`
transferSwitchSource2InputTable		`.1.3.6.1.2.1.33.1.13.14.2`
transferSwitchSource2InputEntry	transferSwitchSource2InputLineIndex	`.1.3.6.1.2.1.33.1.13.14.2.1`
transferSwitchSource2InputLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.13.14.2.1.1`
transferSwitchSource2InputFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.14.2.1.2`
transferSwitchSource2InputVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.14.2.1.3`
transferSwitchSource2Bypass		`.1.3.6.1.2.1.33.1.13.15`
transferSwitchSource2BypassFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.15.1`
transferSwitchSource2BypassNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.13.15.2`
transferSwitchSource2BypassTable		`.1.3.6.1.2.1.33.1.13.15.3`
transferSwitchSource2BypassEntry	transferSwitchSource2BypassLineIndex	`.1.3.6.1.2.1.33.1.13.15.3.1`
transferSwitchSource2BypassLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.13.15.3.1.1`
transferSwitchSource2BypassVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.15.3.1.2`
transferSwitchSource2BypassCurrent	0.1 RMS AmpNonNegativeInteger	`.1.3.6.1.2.1.33.1.13.15.3.1.3`
transferSwitchSource2On OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.2`
transferSwitchSource1ManualBypassOn OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.3`
transferSwitchSource2ManualBypassOn OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.4`
transferSwitchAutoTransfermode OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.5`
transferSwitchSourcesSynchron OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.6`
transferSwitchPreferedMains1 OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.7`
transferSwitchPreferedMains2 OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.8`
transferSwitchAutostartEnabled OBS ✓ r/w	Enumeration	`.1.3.6.1.2.1.33.1.13.9`
upsInputAux		`.1.3.6.1.2.1.33.1.14`
upsInputAuxBads	SNMPv2-SMICounter32	`.1.3.6.1.2.1.33.1.14.1`
upsInputAuxNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.14.2`
upsInputAuxTable		`.1.3.6.1.2.1.33.1.14.3`
upsInputAuxEntry	upsInputAuxIndex	`.1.3.6.1.2.1.33.1.14.3.1`
upsInputAuxIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.14.3.1.1`
upsInputAuxFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.14.3.1.2`
upsInputAuxVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.14.3.1.3`
upsInputAuxCurrent	0.1 RMS AmpNonNegativeInteger	`.1.3.6.1.2.1.33.1.14.3.1.4`
upsInputAuxTruePower	WattsNonNegativeInteger	`.1.3.6.1.2.1.33.1.14.3.1.5`
additionalValues		`.1.3.6.1.2.1.33.1.15`
externalSensor	degrees CentigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.15.1`
upsBattery		`.1.3.6.1.2.1.33.1.2`
upsBatteryStatus	Enumeration	`.1.3.6.1.2.1.33.1.2.1`
upsBatteryPositiveVoltage	0.1 Volt DCNonNegativeInteger	`.1.3.6.1.2.1.33.1.2.10`
upsBatteryNegativeVoltage	0.1 Volt DCSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.2.11`
upsBatteryPositiveCurrent	0.1 Amp DCSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.2.12`
upsBatteryNegativeCurrent	0.1 Amp DCSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.2.13`
upsSecondsOnBattery	secondsNonNegativeInteger	`.1.3.6.1.2.1.33.1.2.2`
upsEstimatedMinutesRemaining	minutesSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.2.3`
upsEstimatedChargeRemaining	percentInteger32	`.1.3.6.1.2.1.33.1.2.4`
upsBatteryVoltage	0.1 Volt DCNonNegativeInteger	`.1.3.6.1.2.1.33.1.2.5`
upsBatteryCurrent	0.1 Amp DCSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.2.6`
upsBatteryTemperature	degrees CentigradeSNMPv2-SMIInteger32	`.1.3.6.1.2.1.33.1.2.7`
upsBatteryCondition	Enumeration	`.1.3.6.1.2.1.33.1.2.8`
upsBatteryInstallationDate	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.2.9`
upsInput		`.1.3.6.1.2.1.33.1.3`
upsInputLineBads	SNMPv2-SMICounter32	`.1.3.6.1.2.1.33.1.3.1`
upsInputNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.3.2`
upsInputTable		`.1.3.6.1.2.1.33.1.3.3`
upsInputEntry	upsInputLineIndex	`.1.3.6.1.2.1.33.1.3.3.1`
upsInputLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.3.3.1.1`
upsInputFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.3.3.1.2`
upsInputVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.3.3.1.3`
upsInputCurrent	0.1 RMS AmpNonNegativeInteger	`.1.3.6.1.2.1.33.1.3.3.1.4`
upsInputTruePower	WattsNonNegativeInteger	`.1.3.6.1.2.1.33.1.3.3.1.5`
upsGeneratorOn	Enumeration	`.1.3.6.1.2.1.33.1.3.4`
upsOutput		`.1.3.6.1.2.1.33.1.4`
upsOutputSource	Enumeration	`.1.3.6.1.2.1.33.1.4.1`
upsOutputFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.4.2`
upsOutputNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.4.3`
upsOutputTable		`.1.3.6.1.2.1.33.1.4.4`
upsOutputEntry	upsOutputLineIndex	`.1.3.6.1.2.1.33.1.4.4.1`
upsOutputLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.4.4.1.1`
upsOutputVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.4.4.1.2`
upsOutputCurrent	0.1 RMS AmpNonNegativeInteger	`.1.3.6.1.2.1.33.1.4.4.1.3`
upsOutputPower	WattsNonNegativeInteger	`.1.3.6.1.2.1.33.1.4.4.1.4`
upsOutputPercentLoad	percentInteger32	`.1.3.6.1.2.1.33.1.4.4.1.5`
upsOutputApparentPower	VANonNegativeInteger	`.1.3.6.1.2.1.33.1.4.4.1.6`
upsOutputEnergyConsumption	0.01 kWhNonNegativeInteger	`.1.3.6.1.2.1.33.1.4.5`
upsOutputTotalPower	WattsNonNegativeInteger	`.1.3.6.1.2.1.33.1.4.6`
upsBypass		`.1.3.6.1.2.1.33.1.5`
upsBypassFrequency	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.5.1`
upsBypassNumLines	NonNegativeInteger	`.1.3.6.1.2.1.33.1.5.2`
upsBypassTable		`.1.3.6.1.2.1.33.1.5.3`
upsBypassEntry	upsBypassLineIndex	`.1.3.6.1.2.1.33.1.5.3.1`
upsBypassLineIndex	PositiveInteger	`.1.3.6.1.2.1.33.1.5.3.1.1`
upsBypassVoltage	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.5.3.1.2`
upsBypassCurrent	0.1 RMS AmpNonNegativeInteger	`.1.3.6.1.2.1.33.1.5.3.1.3`
upsBypassPower	WattsNonNegativeInteger	`.1.3.6.1.2.1.33.1.5.3.1.4`
upsAlarm		`.1.3.6.1.2.1.33.1.6`
upsAlarmsPresent	SNMPv2-SMIGauge32	`.1.3.6.1.2.1.33.1.6.1`
upsAlarmTable		`.1.3.6.1.2.1.33.1.6.2`
upsAlarmEntry	upsAlarmId	`.1.3.6.1.2.1.33.1.6.2.1`
upsAlarmId	PositiveInteger	`.1.3.6.1.2.1.33.1.6.2.1.1`
upsAlarmDescr	SNMPv2-TCAutonomousType	`.1.3.6.1.2.1.33.1.6.2.1.2`
upsAlarmTime	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.33.1.6.2.1.3`
upsWellKnownAlarms		`.1.3.6.1.2.1.33.1.6.3`
upsAlarmBatteryBad		`.1.3.6.1.2.1.33.1.6.3.1`
upsAlarmBypassBad		`.1.3.6.1.2.1.33.1.6.3.10`
alarmSiteMonitor40		`.1.3.6.1.2.1.33.1.6.3.100`
alarmSiteMonitor41		`.1.3.6.1.2.1.33.1.6.3.101`
alarmSiteMonitor42		`.1.3.6.1.2.1.33.1.6.3.102`
alarmSiteMonitor43		`.1.3.6.1.2.1.33.1.6.3.103`
alarmSiteMonitor44		`.1.3.6.1.2.1.33.1.6.3.104`
alarmSiteMonitor45		`.1.3.6.1.2.1.33.1.6.3.105`
alarmSiteMonitor46		`.1.3.6.1.2.1.33.1.6.3.106`
alarmSiteMonitor47		`.1.3.6.1.2.1.33.1.6.3.107`
alarmSiteMonitor48		`.1.3.6.1.2.1.33.1.6.3.108`
alarmSiteMonitor49		`.1.3.6.1.2.1.33.1.6.3.109`
upsAlarmOutputOffAsRequested		`.1.3.6.1.2.1.33.1.6.3.11`
alarmSiteMonitor50		`.1.3.6.1.2.1.33.1.6.3.110`
alarmSiteMonitor51		`.1.3.6.1.2.1.33.1.6.3.111`
alarmSiteMonitor52		`.1.3.6.1.2.1.33.1.6.3.112`
alarmSiteMonitor53		`.1.3.6.1.2.1.33.1.6.3.113`
alarmSiteMonitor54		`.1.3.6.1.2.1.33.1.6.3.114`
alarmSiteMonitor55		`.1.3.6.1.2.1.33.1.6.3.115`
alarmSiteMonitor56		`.1.3.6.1.2.1.33.1.6.3.116`
alarmSiteMonitor57		`.1.3.6.1.2.1.33.1.6.3.117`
alarmSiteMonitor58		`.1.3.6.1.2.1.33.1.6.3.118`
alarmSiteMonitor59		`.1.3.6.1.2.1.33.1.6.3.119`
upsAlarmUpsOffAsRequested		`.1.3.6.1.2.1.33.1.6.3.12`
alarmSiteMonitor60		`.1.3.6.1.2.1.33.1.6.3.120`
alarmSiteMonitor61		`.1.3.6.1.2.1.33.1.6.3.121`
alarmSiteMonitor62		`.1.3.6.1.2.1.33.1.6.3.122`
alarmSiteMonitor63		`.1.3.6.1.2.1.33.1.6.3.123`
alarmSiteMonitor64		`.1.3.6.1.2.1.33.1.6.3.124`
alarmSensorManager1Low		`.1.3.6.1.2.1.33.1.6.3.125`
alarmSensorManager2Low		`.1.3.6.1.2.1.33.1.6.3.126`
alarmSensorManager3Low		`.1.3.6.1.2.1.33.1.6.3.127`
alarmSensorManager4Low		`.1.3.6.1.2.1.33.1.6.3.128`
alarmSensorManager5Low		`.1.3.6.1.2.1.33.1.6.3.129`
upsAlarmChargerFailed		`.1.3.6.1.2.1.33.1.6.3.13`
alarmSensorManager6Low		`.1.3.6.1.2.1.33.1.6.3.130`
alarmSensorManager7Low		`.1.3.6.1.2.1.33.1.6.3.131`
alarmSensorManager8Low		`.1.3.6.1.2.1.33.1.6.3.132`
alarmSensorManager1High		`.1.3.6.1.2.1.33.1.6.3.133`
alarmSensorManager2High		`.1.3.6.1.2.1.33.1.6.3.134`
alarmSensorManager3High		`.1.3.6.1.2.1.33.1.6.3.135`
alarmSensorManager4High		`.1.3.6.1.2.1.33.1.6.3.136`
alarmSensorManager5High		`.1.3.6.1.2.1.33.1.6.3.137`
alarmSensorManager6High		`.1.3.6.1.2.1.33.1.6.3.138`
alarmSensorManager7High		`.1.3.6.1.2.1.33.1.6.3.139`
upsAlarmUpsOutputOff		`.1.3.6.1.2.1.33.1.6.3.14`
alarmSensorManager8High		`.1.3.6.1.2.1.33.1.6.3.140`
alarmUser1		`.1.3.6.1.2.1.33.1.6.3.141`
alarmUser2		`.1.3.6.1.2.1.33.1.6.3.142`
alarmUser3		`.1.3.6.1.2.1.33.1.6.3.143`
alarmUser4		`.1.3.6.1.2.1.33.1.6.3.144`
alarmUser5		`.1.3.6.1.2.1.33.1.6.3.145`
alarmUser6		`.1.3.6.1.2.1.33.1.6.3.146`
alarmUser7		`.1.3.6.1.2.1.33.1.6.3.147`
statusDischarging		`.1.3.6.1.2.1.33.1.6.3.148`
statusCharging		`.1.3.6.1.2.1.33.1.6.3.149`
upsAlarmUpsSystemOff		`.1.3.6.1.2.1.33.1.6.3.15`
alarmSensorManagerInput1		`.1.3.6.1.2.1.33.1.6.3.150`
alarmSensorManagerInput2		`.1.3.6.1.2.1.33.1.6.3.151`
alarmSensorManagerInput3		`.1.3.6.1.2.1.33.1.6.3.152`
alarmSensorManagerInput4		`.1.3.6.1.2.1.33.1.6.3.153`
alarmSensorManagerOutput1		`.1.3.6.1.2.1.33.1.6.3.154`
alarmSensorManagerOutput2		`.1.3.6.1.2.1.33.1.6.3.155`
alarmSensorManagerOutput3		`.1.3.6.1.2.1.33.1.6.3.156`
alarmSensorManagerOutput4		`.1.3.6.1.2.1.33.1.6.3.157`
alarmSensorManagerComLost		`.1.3.6.1.2.1.33.1.6.3.158`
alarmVuesWindalarm		`.1.3.6.1.2.1.33.1.6.3.159`
upsAlarmFanFailure		`.1.3.6.1.2.1.33.1.6.3.16`
alarmTransferswitchSourcesAsynchronous		`.1.3.6.1.2.1.33.1.6.3.160`
alarmTransferswitchStaticSwitchAFailure		`.1.3.6.1.2.1.33.1.6.3.161`
alarmTransferswitchStaticSwitchBFailure		`.1.3.6.1.2.1.33.1.6.3.162`
alarmTransferswitchOnStaticSwitchA		`.1.3.6.1.2.1.33.1.6.3.163`
alarmTransferswitchOnStaticSwitchB		`.1.3.6.1.2.1.33.1.6.3.164`
alarmTransferswitchOnManualBypassA		`.1.3.6.1.2.1.33.1.6.3.165`
alarmTransferswitchOnManualBypassB		`.1.3.6.1.2.1.33.1.6.3.166`
alarmTransferswitchSourceAFailure		`.1.3.6.1.2.1.33.1.6.3.167`
alarmTransferswitchSourceBFailure		`.1.3.6.1.2.1.33.1.6.3.168`
alarmTransferswitchGeneralFault		`.1.3.6.1.2.1.33.1.6.3.169`
upsAlarmFuseFailure		`.1.3.6.1.2.1.33.1.6.3.17`
alarmTransferswitchRedundancyLost		`.1.3.6.1.2.1.33.1.6.3.170`
alarmTransferswitchOutputOverload		`.1.3.6.1.2.1.33.1.6.3.171`
alarmBlackBoxReady		`.1.3.6.1.2.1.33.1.6.3.172`
upsAlarmInputAuxBad		`.1.3.6.1.2.1.33.1.6.3.173`
upsAlarmThresholdAlarm		`.1.3.6.1.2.1.33.1.6.3.174`
upsAlarmThresholdWarning		`.1.3.6.1.2.1.33.1.6.3.175`
upsAlarmTestFailed		`.1.3.6.1.2.1.33.1.6.3.176`
upsAlarmBatteryWeak		`.1.3.6.1.2.1.33.1.6.3.177`
upsAlarmGeneratorOn		`.1.3.6.1.2.1.33.1.6.3.178`
upsAlarmRedundancyLost		`.1.3.6.1.2.1.33.1.6.3.179`
upsAlarmGeneralFault		`.1.3.6.1.2.1.33.1.6.3.18`
upsAlarmBatteryTooOld		`.1.3.6.1.2.1.33.1.6.3.180`
upsAlarmDiagnosticTestFailed		`.1.3.6.1.2.1.33.1.6.3.19`
upsAlarmOnBattery		`.1.3.6.1.2.1.33.1.6.3.2`
upsAlarmCommunicationsLost		`.1.3.6.1.2.1.33.1.6.3.20`
upsAlarmAwaitingPower		`.1.3.6.1.2.1.33.1.6.3.21`
upsAlarmShutdownPending		`.1.3.6.1.2.1.33.1.6.3.22`
upsAlarmShutdownImminent		`.1.3.6.1.2.1.33.1.6.3.23`
upsAlarmTestInProgress		`.1.3.6.1.2.1.33.1.6.3.24`
alarmAUXInput1		`.1.3.6.1.2.1.33.1.6.3.25`
alarmAUXInput2		`.1.3.6.1.2.1.33.1.6.3.26`
alarmAUXInput3		`.1.3.6.1.2.1.33.1.6.3.27`
alarmAUXInput4		`.1.3.6.1.2.1.33.1.6.3.28`
alarmSiteManagerDigitalInput1		`.1.3.6.1.2.1.33.1.6.3.29`
upsAlarmLowBattery		`.1.3.6.1.2.1.33.1.6.3.3`
alarmSiteManagerDigitalInput2		`.1.3.6.1.2.1.33.1.6.3.30`
alarmSiteManagerDigitalInput3		`.1.3.6.1.2.1.33.1.6.3.31`
alarmSiteManagerDigitalInput4		`.1.3.6.1.2.1.33.1.6.3.32`
alarmSiteManagerDigitalInput5		`.1.3.6.1.2.1.33.1.6.3.33`
alarmSiteManagerDigitalInput6		`.1.3.6.1.2.1.33.1.6.3.34`
alarmSiteManagerDigitalInput7		`.1.3.6.1.2.1.33.1.6.3.35`
alarmSiteManagerDigitalInput8		`.1.3.6.1.2.1.33.1.6.3.36`
alarmSiteManagerAnalogInput1		`.1.3.6.1.2.1.33.1.6.3.37`
alarmSiteManagerAnalogInput2		`.1.3.6.1.2.1.33.1.6.3.38`
alarmSiteManagerAnalogInput3		`.1.3.6.1.2.1.33.1.6.3.39`
upsAlarmDepletedBattery		`.1.3.6.1.2.1.33.1.6.3.4`
alarmSiteManagerAnalogInput4		`.1.3.6.1.2.1.33.1.6.3.40`
alarmSiteManagerAnalogInput5		`.1.3.6.1.2.1.33.1.6.3.41`
alarmSiteManagerAnalogInput6		`.1.3.6.1.2.1.33.1.6.3.42`
alarmSiteManagerAnalogInput7		`.1.3.6.1.2.1.33.1.6.3.43`
alarmSiteManagerAnalogInput8		`.1.3.6.1.2.1.33.1.6.3.44`
alarmSiteManagerMarker1		`.1.3.6.1.2.1.33.1.6.3.45`
alarmSiteManagerMarker2		`.1.3.6.1.2.1.33.1.6.3.46`
alarmSiteManagerMarker3		`.1.3.6.1.2.1.33.1.6.3.47`
alarmSiteManagerMarker4		`.1.3.6.1.2.1.33.1.6.3.48`
alarmSiteManagerMarker5		`.1.3.6.1.2.1.33.1.6.3.49`
upsAlarmTempBad		`.1.3.6.1.2.1.33.1.6.3.5`
alarmSiteManagerMarker6		`.1.3.6.1.2.1.33.1.6.3.50`
alarmSiteManagerMarker7		`.1.3.6.1.2.1.33.1.6.3.51`
alarmSiteManagerMarker8		`.1.3.6.1.2.1.33.1.6.3.52`
alarmSiteManagerOutput1		`.1.3.6.1.2.1.33.1.6.3.53`
alarmSiteManagerOutput2		`.1.3.6.1.2.1.33.1.6.3.54`
alarmSiteManagerOutput3		`.1.3.6.1.2.1.33.1.6.3.55`
alarmSiteManagerOutput4		`.1.3.6.1.2.1.33.1.6.3.56`
alarmSiteManagerOutput5		`.1.3.6.1.2.1.33.1.6.3.57`
alarmSiteManagerOutput6		`.1.3.6.1.2.1.33.1.6.3.58`
alarmSiteManagerOutput7		`.1.3.6.1.2.1.33.1.6.3.59`
upsAlarmInputBad		`.1.3.6.1.2.1.33.1.6.3.6`
alarmSiteManagerOutput8		`.1.3.6.1.2.1.33.1.6.3.60`
alarmSiteMonitor1		`.1.3.6.1.2.1.33.1.6.3.61`
alarmSiteMonitor2		`.1.3.6.1.2.1.33.1.6.3.62`
alarmSiteMonitor3		`.1.3.6.1.2.1.33.1.6.3.63`
alarmSiteMonitor4		`.1.3.6.1.2.1.33.1.6.3.64`
alarmSiteMonitor5		`.1.3.6.1.2.1.33.1.6.3.65`
alarmSiteMonitor6		`.1.3.6.1.2.1.33.1.6.3.66`
alarmSiteMonitor7		`.1.3.6.1.2.1.33.1.6.3.67`
alarmSiteMonitor8		`.1.3.6.1.2.1.33.1.6.3.68`
alarmSiteMonitor9		`.1.3.6.1.2.1.33.1.6.3.69`
upsAlarmOutputBad		`.1.3.6.1.2.1.33.1.6.3.7`
alarmSiteMonitor10		`.1.3.6.1.2.1.33.1.6.3.70`
alarmSiteMonitor11		`.1.3.6.1.2.1.33.1.6.3.71`
alarmSiteMonitor12		`.1.3.6.1.2.1.33.1.6.3.72`
alarmSiteMonitor13		`.1.3.6.1.2.1.33.1.6.3.73`
alarmSiteMonitor14		`.1.3.6.1.2.1.33.1.6.3.74`
alarmSiteMonitor15		`.1.3.6.1.2.1.33.1.6.3.75`
alarmSiteMonitor16		`.1.3.6.1.2.1.33.1.6.3.76`
alarmSiteMonitor17		`.1.3.6.1.2.1.33.1.6.3.77`
alarmSiteMonitor18		`.1.3.6.1.2.1.33.1.6.3.78`
alarmSiteMonitor19		`.1.3.6.1.2.1.33.1.6.3.79`
upsAlarmOutputOverload		`.1.3.6.1.2.1.33.1.6.3.8`
alarmSiteMonitor20		`.1.3.6.1.2.1.33.1.6.3.80`
alarmSiteMonitor21		`.1.3.6.1.2.1.33.1.6.3.81`
alarmSiteMonitor22		`.1.3.6.1.2.1.33.1.6.3.82`
alarmSiteMonitor23		`.1.3.6.1.2.1.33.1.6.3.83`
alarmSiteMonitor24		`.1.3.6.1.2.1.33.1.6.3.84`
alarmSiteMonitor25		`.1.3.6.1.2.1.33.1.6.3.85`
alarmSiteMonitor26		`.1.3.6.1.2.1.33.1.6.3.86`
alarmSiteMonitor27		`.1.3.6.1.2.1.33.1.6.3.87`
alarmSiteMonitor28		`.1.3.6.1.2.1.33.1.6.3.88`
alarmSiteMonitor29		`.1.3.6.1.2.1.33.1.6.3.89`
upsAlarmOnBypass		`.1.3.6.1.2.1.33.1.6.3.9`
alarmSiteMonitor30		`.1.3.6.1.2.1.33.1.6.3.90`
alarmSiteMonitor31		`.1.3.6.1.2.1.33.1.6.3.91`
alarmSiteMonitor32		`.1.3.6.1.2.1.33.1.6.3.92`
alarmSiteMonitor33		`.1.3.6.1.2.1.33.1.6.3.93`
alarmSiteMonitor34		`.1.3.6.1.2.1.33.1.6.3.94`
alarmSiteMonitor35		`.1.3.6.1.2.1.33.1.6.3.95`
alarmSiteMonitor36		`.1.3.6.1.2.1.33.1.6.3.96`
alarmSiteMonitor37		`.1.3.6.1.2.1.33.1.6.3.97`
alarmSiteMonitor38		`.1.3.6.1.2.1.33.1.6.3.98`
alarmSiteMonitor39		`.1.3.6.1.2.1.33.1.6.3.99`
upsTest		`.1.3.6.1.2.1.33.1.7`
upsTestId r/w	ObjectIdentifier	`.1.3.6.1.2.1.33.1.7.1`
upsTestSpinLock r/w	SNMPv2-TCTestAndIncr	`.1.3.6.1.2.1.33.1.7.2`
upsTestResultsSummary	Enumeration	`.1.3.6.1.2.1.33.1.7.3`
upsTestResultsDetail	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.33.1.7.4`
upsTestStartTime	SNMPv2-TCTimeStamp	`.1.3.6.1.2.1.33.1.7.5`
upsTestElapsedTime	SNMPv2-TCTimeInterval	`.1.3.6.1.2.1.33.1.7.6`
upsWellKnownTests		`.1.3.6.1.2.1.33.1.7.7`
upsTestNoTestsInitiated		`.1.3.6.1.2.1.33.1.7.7.1`
upsTestAbortTestInProgress		`.1.3.6.1.2.1.33.1.7.7.2`
upsTestGeneralSystemsTest		`.1.3.6.1.2.1.33.1.7.7.3`
upsTestQuickBatteryTest		`.1.3.6.1.2.1.33.1.7.7.4`
upsTestDeepBatteryCalibration		`.1.3.6.1.2.1.33.1.7.7.5`
upsControl		`.1.3.6.1.2.1.33.1.8`
upsShutdownType r/w	Enumeration	`.1.3.6.1.2.1.33.1.8.1`
upsShutdownAfterDelay r/w	secondsInteger32	`.1.3.6.1.2.1.33.1.8.2`
upsStartupAfterDelay r/w	secondsInteger32	`.1.3.6.1.2.1.33.1.8.3`
upsRebootWithDuration r/w	secondsInteger32	`.1.3.6.1.2.1.33.1.8.4`
upsAutoRestart r/w	Enumeration	`.1.3.6.1.2.1.33.1.8.5`
upsConfig		`.1.3.6.1.2.1.33.1.9`
upsConfigInputVoltage r/w	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.1`
upsConfigHighVoltageTransferPoint r/w	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.10`
upsConfigInputFreq r/w	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.2`
upsConfigOutputVoltage r/w	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.3`
upsConfigOutputFreq r/w	0.1 HertzNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.4`
upsConfigOutputVA	Volt-AmpsNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.5`
upsConfigOutputPower	WattsNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.6`
upsConfigLowBattTime r/w	minutesNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.7`
upsConfigAudibleStatus r/w	Enumeration	`.1.3.6.1.2.1.33.1.9.8`
upsConfigLowVoltageTransferPoint r/w	RMS VoltsNonNegativeInteger	`.1.3.6.1.2.1.33.1.9.9`
sensorManConformance		`.1.3.6.1.2.1.33.10`
sensorManCompliances		`.1.3.6.1.2.1.33.10.1`
sensorManGroups		`.1.3.6.1.2.1.33.10.2`
sensorManSubsetGroups		`.1.3.6.1.2.1.33.10.2.1`
sensorManSubsetSensorsGroups		`.1.3.6.1.2.1.33.10.2.1.1`
sensorManSubsetInputsGroup		`.1.3.6.1.2.1.33.10.2.1.2`
sensorManSubsetOutputGroups		`.1.3.6.1.2.1.33.10.2.1.3`
transferSwitchConformance		`.1.3.6.1.2.1.33.11`
transferSwitchCompliances		`.1.3.6.1.2.1.33.11.1`
transferSwitchGroups		`.1.3.6.1.2.1.33.12`
transferSwitchSubsetGroups		`.1.3.6.1.2.1.33.12.1`
upsTraps		`.1.3.6.1.2.1.33.2`
upsConformance		`.1.3.6.1.2.1.33.3`
upsCompliances		`.1.3.6.1.2.1.33.3.1`
upsGroups		`.1.3.6.1.2.1.33.3.2`
upsSubsetGroups		`.1.3.6.1.2.1.33.3.2.1`
upsBasicGroups		`.1.3.6.1.2.1.33.3.2.2`
upsFullGroups		`.1.3.6.1.2.1.33.3.2.3`
upsModules		`.1.3.6.1.2.1.33.6`
upsNumModules	NonNegativeInteger	`.1.3.6.1.2.1.33.6.1`
upsModulesTable		`.1.3.6.1.2.1.33.6.2`
upsModulesEntry	upsModuleId	`.1.3.6.1.2.1.33.6.2.1`
upsModuleId	Integer32	`.1.3.6.1.2.1.33.6.2.1.1`
upsModuleStatus	Enumeration	`.1.3.6.1.2.1.33.6.2.1.2`
sitemanagerConformance		`.1.3.6.1.2.1.33.7`
sitemanagerCompliances		`.1.3.6.1.2.1.33.7.1`
sitemanagerGroups		`.1.3.6.1.2.1.33.7.2`
sitemanagerSubsetGroups		`.1.3.6.1.2.1.33.7.2.1`
siteMonitorGroups		`.1.3.6.1.2.1.33.8`
siteMonitorSubsetGroups		`.1.3.6.1.2.1.33.8.1`
auxConformance		`.1.3.6.1.2.1.33.9`
auxCompliances		`.1.3.6.1.2.1.33.9.1`
auxGroups		`.1.3.6.1.2.1.33.9.2`
auxSubsetGroups		`.1.3.6.1.2.1.33.9.2.1`

Dependencies (3) 3 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CS141-MIBgenerexselected
- SNMPv2-CONFrfcdefault fallback3 symbols
  - SNMPv2-SMIrfc3 symbols
- SNMPv2-SMIrfcdefault fallbackshared8 symbols
- SNMPv2-TCrfcdefault fallback6 symbols
  - SNMPv2-SMIrfcshared1 symbol

Dependency-first compile order

SNMPv2-SMIrfc
SNMPv2-CONFrfc
SNMPv2-TCrfc
CS141-MIBgenerexselected

Type Definitions (2)

NonNegativeInteger	Integer32	`range: 0..2147483647` Display format: `d` This data type is a non-negative value.
PositiveInteger	Integer32	`range: 1..2147483647` Display format: `d` This data type is a non-zero and non-negative value.

Conformance Groups (57)

upsSubsetIdentGroup	upsIdentManufacturer upsIdentModel upsIdentAgentSoftwareVersion upsIdentName upsIdentAttachedDevices upsSerialNumber upsLocation upsSystemContact upsSnmpAdapterSerialNr The upsSubsetIdentGroup defines objects which are common across all UPSs which meet subset compliance. Most devices which conform to the upsSubsetIdentGroup will provide access to these objects via a proxy agent. If the proxy agent is compatible with multiple UPS types, configuration of the proxy agent will require specifying some of these values, either individually, or as a group (perhaps through a table lookup mechanism based on the UPS model number).	`.1.3.6.1.2.1.33.3.2.1.1`
upsSubsetBatteryGroup	upsBatteryStatus upsSecondsOnBattery The upsSubsetBatteryGroup defines the objects that are common to battery groups of two-contact UPSs.	`.1.3.6.1.2.1.33.3.2.1.2`
upsSubsetInputGroup	upsInputLineBads The upsSubsetInputGroup defines the objects that are common to the Input groups of two-contact UPSs.	`.1.3.6.1.2.1.33.3.2.1.3`
upsSubsetOutputGroup	upsOutputSource The upsSubsetOutputGroup defines the objects that are common to the Output groups of two-contact UPSs.	`.1.3.6.1.2.1.33.3.2.1.4`
upsSubsetAlarmGroup	upsAlarmsPresent upsAlarmDescr upsAlarmTime upsAlarmId The upsSubsetAlarmGroup defines the objects that are common to the Alarm groups of two-contact UPSs.	`.1.3.6.1.2.1.33.3.2.1.6`
upsSubsetControlGroup	upsShutdownType upsShutdownAfterDelay upsAutoRestart The upsSubsetControlGroup defines the objects that are common to the Control groups of two-contact UPSs.	`.1.3.6.1.2.1.33.3.2.1.8`
upsSubsetConfigGroup	upsConfigInputVoltage upsConfigInputFreq upsConfigOutputVoltage upsConfigOutputFreq upsConfigOutputVA upsConfigOutputPower The upsSubsetConfigGroup defines the objects that are common to the Config groups of two-contact UPSs.	`.1.3.6.1.2.1.33.3.2.1.9`
upsBasicIdentGroup	upsIdentManufacturer upsIdentModel upsIdentUPSSoftwareVersion upsIdentAgentSoftwareVersion upsIdentName The upsBasicIdentGroup defines objects which are common to the Ident group of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.1`
upsBasicBatteryGroup	upsBatteryStatus upsSecondsOnBattery The upsBasicBatteryGroup defines the objects that are common to the battery groups of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.2`
upsBasicInputGroup	upsInputLineBads upsInputNumLines upsInputFrequency upsInputVoltage The upsBasicInputGroup defines the objects that are common to the Input groups of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.3`
upsBasicOutputGroup	upsOutputSource upsOutputFrequency upsOutputNumLines upsOutputVoltage The upsBasicOutputGroup defines the objects that are common to the Output groups of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.4`
upsBasicBypassGroup	upsBypassFrequency upsBypassNumLines upsBypassCurrent upsBypassPower The upsBasicBypassGroup defines the objects that are common to the Bypass groups of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.5`
upsBasicAlarmGroup	upsAlarmsPresent upsAlarmDescr upsAlarmTime The upsBasicAlarmGroup defines the objects that are common to the Alarm groups of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.6`
upsBasicTestGroup	upsTestId upsTestSpinLock upsTestResultsSummary upsTestResultsDetail upsTestStartTime upsTestElapsedTime The upsBasicTestGroup defines the objects that are common to the Test groups of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.7`
upsBasicControlGroup	upsShutdownType upsShutdownAfterDelay upsStartupAfterDelay upsRebootWithDuration upsAutoRestart The upsBasicControlGroup defines the objects that are common to the Control groups of compliant UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.8`
upsBasicConfigGroup	upsConfigInputVoltage upsConfigInputFreq upsConfigOutputVoltage upsConfigOutputFreq upsConfigOutputVA upsConfigOutputPower upsConfigLowBattTime upsConfigAudibleStatus upsConfigLowVoltageTransferPoint upsConfigHighVoltageTransferPoint The upsBasicConfigGroup defines the objects that are common to the Config groups of UPSs which support basic functions.	`.1.3.6.1.2.1.33.3.2.2.9`
upsFullIdentGroup	upsIdentManufacturer upsIdentModel upsIdentUPSSoftwareVersion upsIdentAgentSoftwareVersion upsIdentName upsIdentAttachedDevices The upsFullIdentGroup defines objects which are common to the Ident group of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.1`
upsFullBatteryGroup	upsBatteryStatus upsSecondsOnBattery upsEstimatedMinutesRemaining upsEstimatedChargeRemaining upsBatteryVoltage upsBatteryCurrent upsBatteryTemperature upsBatteryCondition upsBatteryInstallationDate upsBatteryPositiveVoltage upsBatteryNegativeVoltage upsBatteryPositiveCurrent upsBatteryNegativeCurrent The upsFullBatteryGroup defines the objects that are common to the battery groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.2`
upsFullInputGroup	upsInputLineBads upsInputNumLines upsGeneratorOn upsInputFrequency upsInputVoltage upsInputCurrent upsInputTruePower The upsFullInputGroup defines the objects that are common to the Input groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.3`
upsFullOutputGroup	upsOutputEnergyConsumption upsOutputTotalPower upsOutputSource upsOutputFrequency upsOutputNumLines upsOutputVoltage upsOutputCurrent upsOutputPower upsOutputPercentLoad upsOutputApparentPower The upsFullOutputGroup defines the objects that are common to the Output groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.4`
upsFullBypassGroup	upsBypassFrequency upsBypassNumLines upsBypassVoltage The upsFullBypassGroup defines the objects that are common to the Bypass groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.5`
upsFullAlarmGroup	upsAlarmsPresent upsAlarmDescr upsAlarmTime The upsFullAlarmGroup defines the objects that are common to the Alarm groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.6`
upsFullTestGroup	upsTestId upsTestSpinLock upsTestResultsSummary upsTestResultsDetail upsTestStartTime upsTestElapsedTime The upsFullTestGroup defines the objects that are common to the Test groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.7`
upsFullControlGroup	upsShutdownType upsShutdownAfterDelay upsStartupAfterDelay upsRebootWithDuration upsAutoRestart The upsFullControlGroup defines the objects that are common to the Control groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.8`
upsFullConfigGroup	upsConfigInputVoltage upsConfigInputFreq upsConfigOutputVoltage upsConfigOutputFreq upsConfigOutputVA upsConfigOutputPower upsConfigLowBattTime upsConfigAudibleStatus The upsFullConfigGroup defines the objects that are common to the Config groups of fully compliant UPSs.	`.1.3.6.1.2.1.33.3.2.3.9`
upsInputAuxGroup	upsInputAuxFrequency upsInputAuxVoltage upsInputAuxCurrent upsInputAuxTruePower upsInputAuxBads upsInputAuxNumLines The upsInputAuxGroup defines the UPS input Aux values.	`.1.3.6.1.2.1.33.3.2.3.10`
upsAdditionalValuesGroup	externalSensor The additional values.	`.1.3.6.1.2.1.33.3.2.3.11`
upsTrapGroup	upsTrapOnBattery upsTrapTestCompleted upsTrapAlarmEntryAdded upsTrapAlarmEntryRemoved The upsTrapGroup defines the UPS traps.	`.1.3.6.1.2.1.33.3.2.3.12`
upsModulesGroup	upsNumModules upsModuleStatus The upsInputAuxGroup defines the UPS modules values.	`.1.3.6.1.2.1.33.3.2.3.13`
sitemanagerSubsetRelaisGroup	relais1 relais2 relais3 relais4 relais5 relais6 relais7 relais8 The sitemanagerSubsetRelaisGroup defines the relais objects.	`.1.3.6.1.2.1.33.7.2.1.1`
sitemanagerSubsetDigitalGroup	digital1 digital2 digital3 digital4 digital5 digital6 digital7 digital8 The sitemanagerSubsetDigitalGroup defines the digital objects.	`.1.3.6.1.2.1.33.7.2.1.2`
sitemanagerSubsetAnalogGroup	analog1 analog1Min analog1Max analog2 analog2Min analog2Max analog3 analog3Min analog3Max analog4 analog4Min analog4Max analog5 analog5Min analog5Max analog6 analog6Min analog6Max analog7 analog7Min analog7Max analog8 analog8Min analog8Max The sitemanagerSubsetAnalogGroup defines the analog objects.	`.1.3.6.1.2.1.33.7.2.1.3`
sitemanagerSubsetmarkerGroup	marker1 marker2 marker3 marker4 marker5 marker6 marker7 marker8 The sitemanagerSubsetMarkerGroup defines the marker objects.	`.1.3.6.1.2.1.33.7.2.1.4`
siteMonitorSubsetDigitalGroup	siteMonitor1 siteMonitor2 siteMonitor3 siteMonitor4 siteMonitor5 siteMonitor6 siteMonitor7 siteMonitor8 siteMonitor9 siteMonitor10 siteMonitor11 siteMonitor12 siteMonitor13 siteMonitor14 siteMonitor15 siteMonitor16 siteMonitor17 siteMonitor18 siteMonitor19 siteMonitor20 siteMonitor21 siteMonitor22 siteMonitor23 siteMonitor24 siteMonitor25 siteMonitor26 siteMonitor27 siteMonitor28 siteMonitor29 siteMonitor30 siteMonitor31 siteMonitor32 siteMonitor33 siteMonitor34 siteMonitor35 siteMonitor36 siteMonitor37 siteMonitor38 siteMonitor39 siteMonitor40 siteMonitor41 siteMonitor42 siteMonitor43 siteMonitor44 siteMonitor45 siteMonitor46 siteMonitor47 siteMonitor48 siteMonitor49 siteMonitor50 siteMonitor51 siteMonitor52 siteMonitor53 siteMonitor54 siteMonitor55 siteMonitor56 siteMonitor57 siteMonitor58 siteMonitor59 siteMonitor60 siteMonitor61 siteMonitor62 siteMonitor63 siteMonitor64 The siteMonitorSubsetDigitalGroup defines the digital objects.	`.1.3.6.1.2.1.33.8.1.1`
auxSubsetPortGroups	auxPort1 auxPort2 auxPort3 auxPort4 The auxSubsetPortGroups defines the port objects.	`.1.3.6.1.2.1.33.9.2.1.1`
sensorManSubsetSensor1Group	sensorMan1Value sensorMan1Location sensorMan1Unit sensorMan1ThresholdLow sensorMan1ThresholdHigh sensorMan1Scaling sensorMan1Offset The sensorManSubsetSensor1Group defines the sensor 1 values.	`.1.3.6.1.2.1.33.10.2.1.1.1`
sensorManSubsetSensor2Group	sensorMan2Value sensorMan2Location sensorMan2Unit sensorMan2ThresholdLow sensorMan2ThresholdHigh sensorMan2Scaling sensorMan2Offset The sensorManSubsetSensor2Group defines the sensor 2 values.	`.1.3.6.1.2.1.33.10.2.1.1.2`
sensorManSubsetSensor3Group	sensorMan3Value sensorMan3Location sensorMan3Unit sensorMan3ThresholdLow sensorMan3ThresholdHigh sensorMan3Scaling sensorMan3Offset The sensorManSubsetSensor3Group defines the sensor 3 values.	`.1.3.6.1.2.1.33.10.2.1.1.3`
sensorManSubsetSensor4Group	sensorMan4Value sensorMan4Location sensorMan4Unit sensorMan4ThresholdLow sensorMan4ThresholdHigh sensorMan4Scaling sensorMan4Offset The sensorManSubsetSensor4Group defines the sensor 4 values.	`.1.3.6.1.2.1.33.10.2.1.1.4`
sensorManSubsetSensor5Group	sensorMan5Value sensorMan5Location sensorMan5Unit sensorMan5ThresholdLow sensorMan5ThresholdHigh sensorMan5Scaling sensorMan5Offset The sensorManSubsetSensor5Group defines the sensor 5 values.	`.1.3.6.1.2.1.33.10.2.1.1.5`
sensorManSubsetSensor6Group	sensorMan6Value sensorMan6Location sensorMan6Unit sensorMan6ThresholdLow sensorMan6ThresholdHigh sensorMan6Scaling sensorMan6Offset The sensorManSubsetSensor6Group defines the sensor 6 values.	`.1.3.6.1.2.1.33.10.2.1.1.6`
sensorManSubsetSensor7Group	sensorMan7Value sensorMan7Location sensorMan7Unit sensorMan7ThresholdLow sensorMan7ThresholdHigh sensorMan7Scaling sensorMan7Offset The sensorManSubsetSensor7Group defines the sensor 7 values.	`.1.3.6.1.2.1.33.10.2.1.1.7`
sensorManSubsetSensor8Group	sensorMan8Value sensorMan8Location sensorMan8Unit sensorMan8ThresholdLow sensorMan8ThresholdHigh sensorMan8Scaling sensorMan8Offset The sensorManSubsetSensor8Group defines the sensor 8 values.	`.1.3.6.1.2.1.33.10.2.1.1.8`
sensorManSubsetInput1Group	input1Value input1Location input1NCContact The sensorManSubsetInput1Group defines the sensor 1 input.	`.1.3.6.1.2.1.33.10.2.1.2.1`
sensorManSubsetInput2Group	input2Value input2Location input2NCContact The sensorManSubsetInput2Group defines the sensor 2 input.	`.1.3.6.1.2.1.33.10.2.1.2.2`
sensorManSubsetInput3Group	input3Value input3Location input3NCContact The sensorManSubsetInput3Group defines the sensor 3 input.	`.1.3.6.1.2.1.33.10.2.1.2.3`
sensorManSubsetInput4Group	input4Value input4Location input4NCContact The sensorManSubsetInput4Group defines the sensor 4 input.	`.1.3.6.1.2.1.33.10.2.1.2.4`
sensorManSubsetOutput1Group	output1Value output1Location output1NCContact The sensorManSubsetInput1Group defines the sensor 1 output.	`.1.3.6.1.2.1.33.10.2.1.3.1`
sensorManSubsetOutput2Group	output2Value output2Location output2NCContact The sensorManSubsetOutput2Group defines the sensor 2 output.	`.1.3.6.1.2.1.33.10.2.1.3.2`
sensorManSubsetOutput3Group	output3Value output3Location output3NCContact The sensorManSubsetOutput3Group defines the sensor 3 output.	`.1.3.6.1.2.1.33.10.2.1.3.3`
sensorManSubsetOutput4Group	output4Value output4Location output4NCContact The sensorManSubsetOutput4Group defines the sensor 4 output.	`.1.3.6.1.2.1.33.10.2.1.3.4`
transferSwitchSubsetConfigGroup	transferSwitchSource1On transferSwitchSource2On transferSwitchSource1ManualBypassOn transferSwitchSource2ManualBypassOn transferSwitchAutoTransfermode transferSwitchSourcesSynchron transferSwitchPreferedMains1 transferSwitchPreferedMains2 transferSwitchAutostartEnabled transferSwitchTemperature The transferSwitchSubsetConfigGroup defines the config values.	`.1.3.6.1.2.1.33.12.1.1`
transferSwitchSubsetOutputGroup	transferSwitchOutputFrequency transferSwitchOutputNumLines transferSwitchOutputVoltage transferSwitchOutputCurrent transferSwitchOutputPower transferSwitchOutputPercentLoad transferSwitchOutputApparentPower The transferSwitchSubsetConfigGroup defines the outputs values.	`.1.3.6.1.2.1.33.12.1.2`
transferSwitchSubsetSource1InputGroup	transferSwitchSource1InputNumLines transferSwitchSource1InputFrequency transferSwitchSource1InputVoltage The transferSwitchSubsetSource1InputGroup defines the source 1 inputs.	`.1.3.6.1.2.1.33.12.1.3`
transferSwitchSubsetSource2InputGroup	transferSwitchSource2InputNumLines transferSwitchSource2InputFrequency transferSwitchSource2InputVoltage The transferSwitchSubsetSource2InputGroup defines the source 2 inputs.	`.1.3.6.1.2.1.33.12.1.4`
transferSwitchSubsetSource1BypassGroup	transferSwitchSource1BypassFrequency transferSwitchSource1BypassNumLines transferSwitchSource1BypassVoltage transferSwitchSource1BypassCurrent The transferSwitchSubsetSource1BypassGroup defines the source 1 bypass values.	`.1.3.6.1.2.1.33.12.1.5`
transferSwitchSubsetSource2BypassGroup	transferSwitchSource2BypassFrequency transferSwitchSource2BypassNumLines transferSwitchSource2BypassVoltage transferSwitchSource2BypassCurrent The transferSwitchSubsetSource2BypassGroup defines the source 2 bypass values.	`.1.3.6.1.2.1.33.12.1.6`

Compliance Statements (14)

OID .1.3.6.1.2.1.33.3.1.1

The compliance statement for UPSs that only support
the two-contact communication protocol.

Required groups

mandatory	upsSubsetIdentGroup
mandatory	upsSubsetBatteryGroup
mandatory	upsSubsetInputGroup
mandatory	upsSubsetOutputGroup
mandatory	upsSubsetAlarmGroup
mandatory	upsSubsetControlGroup
mandatory	upsSubsetConfigGroup
mandatory	upsTrapGroup
mandatory	upsModulesGroup

Object refinements

Object	Access	Syntax	Description
upsBatteryStatus		Integer32	batteryNormal(2) batteryLow(3). Support of the values unknown(1) and batteryDepleted(4) is not required.
upsAlarmDescr			Support of all `well known' alarm types is not required. The well known alarm types which must be supported are: upsAlarmOnBattery, upsAlarmLowBattery, upsAlarmInputBad, upsAlarmUpsOutputOff, upsAlarmUpsSystemOff, and upsAlarmTestInProgress.
upsOutputSource		Integer32	normal(2) battery(4). Support of the values other(1), none(2), bypass(4), booster(6) and reducer(7) is not required.
upsShutdownType	readonly		Read-write access is not required, i.e., compliant systems need not support more than one shutdown type.
upsAutoRestart	readonly		Read-write access is not required, i.e., compliant systems need not support more than one restart type.
upsConfigInputVoltage	readonly		Read-write access is not required.
upsConfigInputFreq	readonly		Read-write access is not required.
upsConfigOutputVoltage	readonly		Read-write access is not required.
upsConfigOutputFreq	readonly		Read-write access is not required.

OID .1.3.6.1.2.1.33.3.1.2

The compliance statement for UPSs that support
full-featured functions, such as control.

Required groups

mandatory	upsBasicIdentGroup
mandatory	upsBasicBatteryGroup
mandatory	upsBasicInputGroup
mandatory	upsBasicOutputGroup
mandatory	upsBasicAlarmGroup
mandatory	upsBasicTestGroup
mandatory	upsBasicControlGroup
mandatory	upsBasicConfigGroup
optional	upsBasicBypassGroup	The upsBasicBypassGroup is only required for UPSs that have a Bypass present.

Object refinements

Object	Access	Syntax	Description
upsAlarmDescr			Support of all `well known' alarm types is not required. The well known alarm types which must be supported are: upsAlarmOnBattery, upsAlarmLowBattery, upsAlarmDepletedBattery, upsAlarmTempBad, upsAlarmInputBad, upsAlarmOutputOverload, upsAlarmOnBypass, upsAlarmBypassBad, upsAlarmOutputOffAsRequested, upsAlarmUpsOffAsRequested, upsAlarmUpsOutputOff, upsAlarmUpsSystemOff, upsAlarmGeneralFault, upsAlarmDiagnosticTestFailed, upsAlarmCommunicationsLost, upsAlarmShutdownPending, and upsAlarmTestInProgress.
upsTestId			Support of all `well known' test types is not required. If no tests are supported, then the only well known test type which must be supported is upsTestNoTestsInitiated.
upsOutputSource		Integer32	normal(2) battery(4) Support of the values other(1), none(2), bypass(4), booster(6) and reducer(7) is not required.
upsShutdownType	readonly		Read-write access is not required, i.e., compliant systems need not support more than one shutdown type.
upsAutoRestart	readonly		Read-write access is not required, i.e., compliant systems need not support more than one restart type.
upsConfigInputVoltage	readonly		Read-write access is not required.
upsConfigInputFreq	readonly		Read-write access is not required.
upsConfigOutputVoltage	readonly		Read-write access is not required.
upsConfigOutputFreq	readonly		Read-write access is not required.
upsConfigLowBattTime			Implementation of all possible values may be onerous for some systems. Consequently, not all possible values must be supported. However, at least two different manufacturer-selected values must be supported.

OID .1.3.6.1.2.1.33.3.1.3

The compliance statement for UPSs that support
advanced full-featured functions.

Required groups

mandatory	upsFullIdentGroup
mandatory	upsFullBatteryGroup
mandatory	upsFullInputGroup
mandatory	upsFullOutputGroup
mandatory	upsFullAlarmGroup
mandatory	upsFullTestGroup
mandatory	upsFullControlGroup
mandatory	upsFullConfigGroup
mandatory	upsInputAuxGroup
mandatory	upsAdditionalValuesGroup
optional	upsFullBypassGroup	The upsFullBypassGroup is only required for UPSs that have a Bypass present.

Object refinements

Object	Access	Description
upsAlarmDescr		Support of all `well known' alarm types is not required. The well known alarm types which must be supported are: upsAlarmBatteryBad, upsAlarmOnBattery, upsAlarmLowBattery, upsAlarmDepletedBattery, upsAlarmTempBad, upsAlarmInputBad, upsAlarmOnBypass, upsAlarmBypassBad, upsAlarmOutputOffAsRequested, upsAlarmUpsOffAsRequested, upsAlarmUpsOutputOff, upsAlarmUpsSystemOff, upsAlarmGeneralFault, upsAlarmDiagnosticTestFailed, upsAlarmCommunicationsLost, upsAlarmShutdownPending, and upsAlarmTestInProgress.
upsTestId		Support of all `well known' test types is not required. The well known test types which must be supported are: upsTestNoTestsInitiated, upsTestGeneralSystemsTest, and upsTestQuickBatteryTest.
upsOutputSource		normal(2) battery(4). Support of the values other(1), none(2), bypass(4), booster(6) and reducer(7) is not required.
upsShutdownType	readonly	Read-write access is not required, i.e., compliant systems need not support more than one shutdown type.
upsAutoRestart	readonly	Read-write access is not required, i.e., compliant systems need not support more than one restart type.
upsConfigInputVoltage	readonly	Read-write access is not required.
upsConfigInputFreq	readonly	Read-write access is not required.
upsConfigOutputVoltage	readonly	Read-write access is not required.
upsConfigOutputFreq	readonly	Read-write access is not required.
upsConfigLowBattTime		Implementation of all possible values may be onerous for some systems. Consequently, not all possible values must be supported. However, at least two different manufacturer-selected values must be supported.

OID .1.3.6.1.2.1.33.7.1.1

The compliance statement for SiteManager.

Required groups

mandatory	sitemanagerSubsetRelaisGroup
mandatory	sitemanagerSubsetDigitalGroup
mandatory	sitemanagerSubsetAnalogGroup
mandatory	sitemanagerSubsetmarkerGroup
mandatory	siteMonitorSubsetDigitalGroup

OID .1.3.6.1.2.1.33.9.1.1

The compliance statement for AUX.

Required groups

mandatory	auxSubsetPortGroups

OID .1.3.6.1.2.1.33.10.1.1

The compliance statement for SensorMan values.

Required groups

mandatory	sensorManSubsetSensor1Group
mandatory	sensorManSubsetSensor2Group
mandatory	sensorManSubsetSensor3Group
mandatory	sensorManSubsetSensor4Group
mandatory	sensorManSubsetSensor5Group
mandatory	sensorManSubsetSensor6Group
mandatory	sensorManSubsetSensor7Group
mandatory	sensorManSubsetSensor8Group

OID .1.3.6.1.2.1.33.10.1.2

The compliance statement for SensorMan inputs.

Required groups

mandatory	sensorManSubsetInput1Group
mandatory	sensorManSubsetInput2Group
mandatory	sensorManSubsetInput3Group
mandatory	sensorManSubsetInput4Group

OID .1.3.6.1.2.1.33.10.1.3

The compliance statement for SensorMan outputs.

Required groups

mandatory	sensorManSubsetOutput1Group
mandatory	sensorManSubsetOutput2Group
mandatory	sensorManSubsetOutput3Group
mandatory	sensorManSubsetOutput4Group

OID .1.3.6.1.2.1.33.11.1.1

The compliance statement for TransferSwitch config.

Required groups

mandatory	transferSwitchSubsetConfigGroup

OID .1.3.6.1.2.1.33.11.1.2

The compliance statement for TransferSwitch output.

Required groups

mandatory	transferSwitchSubsetOutputGroup

OID .1.3.6.1.2.1.33.11.1.3

The compliance statement for TransferSwitch Source1 Input.

Required groups

mandatory	transferSwitchSubsetSource1InputGroup

OID .1.3.6.1.2.1.33.11.1.4

The compliance statement for TransferSwitch Source2 Input.

Required groups

mandatory	transferSwitchSubsetSource2InputGroup

OID .1.3.6.1.2.1.33.11.1.5

The compliance statement for TransferSwitch Source1 Bypass.

Required groups

mandatory	transferSwitchSubsetSource1BypassGroup

OID .1.3.6.1.2.1.33.11.1.6

The compliance statement for TransferSwitch Source2 Bypass.

Required groups

mandatory	transferSwitchSubsetSource2BypassGroup

Notifications / Traps (4)

Name	OID	Description
upsTrapOnBattery upsEstimatedMinutesRemaining upsSecondsOnBattery upsConfigLowBattTime	`.1.3.6.1.2.1.33.2.1`	The UPS is operating on battery power. This trap is persistent and is resent at one minute intervals until the UPS either turns off or is no longer running on battery.
upsTrapTestCompleted upsTestId upsTestSpinLock upsTestResultsSummary upsTestResultsDetail upsTestStartTime upsTestElapsedTime	`.1.3.6.1.2.1.33.2.2`	This trap is sent upon completion of a UPS diagnostic test.
upsTrapAlarmEntryAdded upsAlarmId upsAlarmDescr	`.1.3.6.1.2.1.33.2.3`	This trap is sent each time an alarm is inserted into to the alarm table. It is sent on the insertion of all alarms except for upsAlarmOnBattery and upsAlarmTestInProgress.
upsTrapAlarmEntryRemoved upsAlarmId upsAlarmDescr	`.1.3.6.1.2.1.33.2.4`	This trap is sent each time an alarm is removed from the alarm table. It is sent on the removal of all alarms except for upsAlarmTestInProgress.

CS141-MIB

Imported Objects

Objects (597)

Dependency tree

Dependency-first compile order

Type Definitions (2)

Conformance Groups (57)

Compliance Statements (14)

upsSubsetCompliance

upsBasicCompliance

upsFullCompliance

sitemanagerSubsetCompliance

auxSubsetCompliance

sensorManSubsetSensorsCompliance

sensorManSubsetInputsCompliance

sensorManSubsetOutputsCompliance

transferSwitchSubsetConfigCompliance

transferSwitchSubsetOutputCompliance

transferSwitchSubsetSource1InputCompliance

transferSwitchSubsetSource2InputCompliance

transferSwitchSubsetSource1BypassCompliance

transferSwitchSubsetSource2BypassCompliance

Notifications / Traps (4)