alarmProfileTable

table

.1.3.6.1.4.1.42229.1.2.1.4.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk alarmProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::alarmProfileTable'

Copy

Alarm profile defines the severity profile of alarm and event.

alarmProfileEntry row .1.3.6.1.4.1.42229.1.2.1.4.1.1

Entry of alarmProfileTable

Indexes

alarmProfileId

Column	Syntax	OID
alarmProfileId alarm profile identifier which uniquely specify alarm profile. alarm profile 1 is supported firstly and applicable to all entities implicitly.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.42229.1.2.1.4.1.1.1

alarmProfileENTRTable

table

.1.3.6.1.4.1.42229.1.2.1.5.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk alarmProfileENTRTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::alarmProfileENTRTable'

Copy

The list includes alarm/event entries of an alarm-profile.

alarmProfileENTREntry row .1.3.6.1.4.1.42229.1.2.1.5.1.1

Entry of alarmProfileENTRTable

Indexes

alarmProfileId alarmProfileENTRConditionType alarmProfileENTRFmEntityType alarmProfileENTRTimePeriod

Column	Syntax	OID
alarmProfileENTRConditionType Identifies the current standing conditions which cause conditions and/or events.	CoriantFmtypesConditionType Type Values: 1 idp 2 rupDeg 3 rupFail 4 meaHwvm 5 mea 6 pwra 7 pwrb 8 rupMiss 9 sbanr 10 sdf 11 thermal 12 sdcardmiss 13 sdcardfail 14 mgmtrst 15 progflt 16 ntppu 17 linkdown 18 los 19 lol 20 lofOtu 21 lomOtu 22 timOtu 23 bdiOtu 24 bersdOtu 25 aisOtu 26 bersdOdu 27 lckOdu 28 ociOdu 29 aisOdu 30 bdiOdu 31 timOdu 32 plmOdu 33 loomfi 34 msim 35 loflom 36 csfOpu 37 losync 38 lf 39 rf 40 csfLosGfp 41 csfLosyncGfp 42 csfFdiGfp 43 csfRdiGfp 44 lofdGfp 45 plmGfp 46 lpbkfacility 47 lpbkfterm 48 contcom 49 latchOpen 50 lof 51 aisL 52 msAis 53 timR 54 rsTim 55 rfiL 56 msRfi 99 cabs 100 oog 101 connectFail 102 encryptFail 103 keyexFail 104 bdi 105 bdiO 106 autoshutoff 107 fibrconnMiss 108 bdiP 109 losMsa 110 protna 111 switchThres 112 losyncCd 113 updatePskFail 114 encTrafficSquelch 115 optpwrDiffHigh 116 ptFail 117 ptDeg 118 pskMismatch 119 voatc 120 spanDeg 121 loa 122 topoMism 123 fipsSelftestFail 124 losOpr 125 degOpr 126 horl 127 autoshutoffDis 128 olf 129 swMism 10001 tSe 10002 tDropevents 10003 tOctets 10004 tPkts 10005 tBroadcastpkts 10006 tMulticastpkts 10007 tCrcalignerrors 10008 tUndersizepkts 10009 tOversizepkts 10010 tFragments 10011 tJabbers 10012 tPkts64octets 10013 tPkts65to127octets 10014 tPkts128to255octets 10015 tPkts256to511octets 10016 tPkts512to1023octets 10017 tPkts1024to1518octets 10018 tUtilHt 10019 tBeFec 10020 tUbeFec 10021 tBerFecHt 10022 tEbOtu 10023 tEsOtu 10024 tSesOtu 10025 tUasOtu 10026 tEbOdu 10027 tEsOdu 10028 tSesOdu 10029 tUasOdu 10030 tDelayOduHt 10031 tDelayOduLt 10032 tDgdHt 10033 tCdLt 10034 tCdHt 10035 tOsnrLt 10036 tLoss 10037 tOprHt 10038 tOprLt 10039 tQfactorLt 10040 tOptHt 10041 tOptLt 10042 tPdlHt 10043 tOftHt 10044 tOftLt 10045 tOfrHt 10046 tOfrLt 10047 tCvS 10048 tEsS 10049 tSesS 10050 tUasS 10051 tSefs 10052 tBbeRs 10053 tEsRs 10054 tSesRs 10055 tUasRs 10056 tOfs 10057 tOprLaneHt 10058 tOprLaneLt 10059 tOprTotalHt 10060 tOprTotalLt 10061 tOptLaneHt 10062 tOptLaneLt 10063 tOptTotalHt 10064 tOptTotalLt 10065 tLossTx 10066 tLossRx 10067 tPtfs 10068 tOrlHt 10069 tCvPcs 10070 tEsPcs 10071 tSesPcs 10072 tUasPcs 10073 tCbeFec 10074 tFeb 10075 tIae 10076 tBiae 10077 tBe 10078 tPktserr 11001 init 11002 swupgCompld 11003 swupgFail 11004 swupgRollback 11005 upgCompld 11006 upgFail 11007 intrusion 11008 userlock 11009 swupgIp 11010 ztcFail 11011 ztcComplete 11012 dbactFail 11013 inactive 11014 restart 11015 fstoprot 11016 fstowkg 11017 lockout 11018 mantoprot 11019 mantowkg 11020 noreq 11021 sdonprot 11022 sdonwkg 11023 sfonprot 11024 sfonwkg 11025 wkswpr 11026 prswwk 11027 wtr 11028 dnr 11029 authnFailed 11030 loginFailed 11031 candidatePskMismatch 11032 updatePskCompld 11033 candidatePskAuthenticated 11034 updatePskReqRcv 11035 pulloutTriggered 11036 fipsSelftestPassed 11037 fwCrash 11038 powerArrayQuiteArea	.1.3.6.1.4.1.42229.1.2.1.5.1.1.1
alarmProfileENTRFmEntityType Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referr…	CoriantFmtypesEntityTypeFm Type Values: 1 t10gbe 2 t40gbe 3 t100gbe 4 ochOs 5 otu4 6 otuc2 7 otuc3 8 oduc2 9 oduc3 10 odu4 11 odu3 12 odu2e 13 odu2 14 shelf 15 slot 16 port 17 fan 18 chm1 19 chm2 20 bfm 21 mgteth 22 ntppeer 23 db 24 sw 25 log 26 security 27 psu 28 cfp2 29 qsfp 30 time 31 user 32 ztc 33 ppp 34 fc8g 35 fc16g 36 oduflex 37 otu2 38 otu2e 39 oc192 40 stm64 41 oms 42 gopt 43 paoscofp2 44 pabaofp2 45 pairofp2 46 palrofp2 47 paerofp2 48 bahofp2 50 subslot 51 occ2 52 omd96 53 amplifier 54 omd48S 55 omd48O 56 chm1g 57 tdcmofp2 58 bauofp2 59 paulrofp2 60 osc 61 ots 62 sfpplus 63 xtm2 64 omd8b1ofp2 65 omd8b2ofp2 66 opsofp2 67 ops 68 chm1lh 69 chm2lh 70 t10gwanSonet 71 t10gwanSdh 72 otdrofp2 73 ocmofp2 74 och 75 otuc6 76 oduc6 77 otuc5 78 oduc5 79 otuc4 80 oduc4 81 chm2t 82 opsptofp2 83 frcu 84 cad8ofp2 85 cad8eofp2 86 omd64 87 t400gbe 88 ws04sofp2 89 cad16aofp2 90 baxofp2 91 nmc 92 t1gbe 93 oc48 94 stm16 95 utm2 96 rd09sm 97 omd48e 99 otuc7 100 oduc7 101 otuc9 102 oduc9 103 otuc11 104 oduc11 105 odu0 106 odu1 107 dge2m2ofp2 108 pbmtpp 109 cfp2Dco 110 subport 111 sfp 112 ipsec	.1.3.6.1.4.1.42229.1.2.1.5.1.1.2
alarmProfileENTRTimePeriod Indicates the time-period increments during which PM data is collected.	CoriantTypesManagementTimePeriod Type Values: 0 notApplicable 1 t15min 2 t24h 4 all 5 t1min 6 t1h	.1.3.6.1.4.1.42229.1.2.1.5.1.1.3
alarmProfileENTRSeverityLevelSa Indicates the notification code (severity level) associated with the condition type of service affecting.	CoriantFmtypesSeverityLevel Type Values: 0 notApplicable 1 critical 2 major 3 minor 4 notAlarmed 5 notReported 6 cleared	.1.3.6.1.4.1.42229.1.2.1.5.1.1.4
alarmProfileENTRSeverityLevelNsa Indicates the notification code (severity level) associated with the condition type of non-service affecting.	CoriantFmtypesSeverityLevel Type Values: 0 notApplicable 1 critical 2 major 3 minor 4 notAlarmed 5 notReported 6 cleared	.1.3.6.1.4.1.42229.1.2.1.5.1.1.5

standingConditionTable

table

.1.3.6.1.4.1.42229.1.2.1.6.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk standingConditionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::standingConditionTable'

Copy

The list includes active standing alarms.

standingConditionEntry row .1.3.6.1.4.1.42229.1.2.1.6.1.1

Entry of standingConditionTable

Indexes

standingConditionFmEntity standingConditionConditionType standingConditionLocation standingConditionDirection standingConditionTimePeriod

Column	Syntax	OID
standingConditionFmEntity The management object instance which the alarm or condition is reported against.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.1.6.1.1.1
standingConditionConditionType Identifies the current standing conditions which cause alarms and/or events.	CoriantFmtypesConditionType Type Values: 1 idp 2 rupDeg 3 rupFail 4 meaHwvm 5 mea 6 pwra 7 pwrb 8 rupMiss 9 sbanr 10 sdf 11 thermal 12 sdcardmiss 13 sdcardfail 14 mgmtrst 15 progflt 16 ntppu 17 linkdown 18 los 19 lol 20 lofOtu 21 lomOtu 22 timOtu 23 bdiOtu 24 bersdOtu 25 aisOtu 26 bersdOdu 27 lckOdu 28 ociOdu 29 aisOdu 30 bdiOdu 31 timOdu 32 plmOdu 33 loomfi 34 msim 35 loflom 36 csfOpu 37 losync 38 lf 39 rf 40 csfLosGfp 41 csfLosyncGfp 42 csfFdiGfp 43 csfRdiGfp 44 lofdGfp 45 plmGfp 46 lpbkfacility 47 lpbkfterm 48 contcom 49 latchOpen 50 lof 51 aisL 52 msAis 53 timR 54 rsTim 55 rfiL 56 msRfi 99 cabs 100 oog 101 connectFail 102 encryptFail 103 keyexFail 104 bdi 105 bdiO 106 autoshutoff 107 fibrconnMiss 108 bdiP 109 losMsa 110 protna 111 switchThres 112 losyncCd 113 updatePskFail 114 encTrafficSquelch 115 optpwrDiffHigh 116 ptFail 117 ptDeg 118 pskMismatch 119 voatc 120 spanDeg 121 loa 122 topoMism 123 fipsSelftestFail 124 losOpr 125 degOpr 126 horl 127 autoshutoffDis 128 olf 129 swMism 10001 tSe 10002 tDropevents 10003 tOctets 10004 tPkts 10005 tBroadcastpkts 10006 tMulticastpkts 10007 tCrcalignerrors 10008 tUndersizepkts 10009 tOversizepkts 10010 tFragments 10011 tJabbers 10012 tPkts64octets 10013 tPkts65to127octets 10014 tPkts128to255octets 10015 tPkts256to511octets 10016 tPkts512to1023octets 10017 tPkts1024to1518octets 10018 tUtilHt 10019 tBeFec 10020 tUbeFec 10021 tBerFecHt 10022 tEbOtu 10023 tEsOtu 10024 tSesOtu 10025 tUasOtu 10026 tEbOdu 10027 tEsOdu 10028 tSesOdu 10029 tUasOdu 10030 tDelayOduHt 10031 tDelayOduLt 10032 tDgdHt 10033 tCdLt 10034 tCdHt 10035 tOsnrLt 10036 tLoss 10037 tOprHt 10038 tOprLt 10039 tQfactorLt 10040 tOptHt 10041 tOptLt 10042 tPdlHt 10043 tOftHt 10044 tOftLt 10045 tOfrHt 10046 tOfrLt 10047 tCvS 10048 tEsS 10049 tSesS 10050 tUasS 10051 tSefs 10052 tBbeRs 10053 tEsRs 10054 tSesRs 10055 tUasRs 10056 tOfs 10057 tOprLaneHt 10058 tOprLaneLt 10059 tOprTotalHt 10060 tOprTotalLt 10061 tOptLaneHt 10062 tOptLaneLt 10063 tOptTotalHt 10064 tOptTotalLt 10065 tLossTx 10066 tLossRx 10067 tPtfs 10068 tOrlHt 10069 tCvPcs 10070 tEsPcs 10071 tSesPcs 10072 tUasPcs 10073 tCbeFec 10074 tFeb 10075 tIae 10076 tBiae 10077 tBe 10078 tPktserr 11001 init 11002 swupgCompld 11003 swupgFail 11004 swupgRollback 11005 upgCompld 11006 upgFail 11007 intrusion 11008 userlock 11009 swupgIp 11010 ztcFail 11011 ztcComplete 11012 dbactFail 11013 inactive 11014 restart 11015 fstoprot 11016 fstowkg 11017 lockout 11018 mantoprot 11019 mantowkg 11020 noreq 11021 sdonprot 11022 sdonwkg 11023 sfonprot 11024 sfonwkg 11025 wkswpr 11026 prswwk 11027 wtr 11028 dnr 11029 authnFailed 11030 loginFailed 11031 candidatePskMismatch 11032 updatePskCompld 11033 candidatePskAuthenticated 11034 updatePskReqRcv 11035 pulloutTriggered 11036 fipsSelftestPassed 11037 fwCrash 11038 powerArrayQuiteArea	.1.3.6.1.4.1.42229.1.2.1.6.1.1.2
standingConditionLocation Indicates if the alarm or event location is near end or far end.	CoriantTypesManagementLocation Type Values: 1 nearEnd 2 farEnd 3 notApplicable	.1.3.6.1.4.1.42229.1.2.1.6.1.1.3
standingConditionDirection Specifies the direction of an event/occurrence in the system, Ingress, Egress, NA.	CoriantTypesManagementDirection Type Values: 0 notApplicable 1 ingress 2 egress	.1.3.6.1.4.1.42229.1.2.1.6.1.1.4
standingConditionTimePeriod Indicates the time-period increments during which PM data is collected.	CoriantTypesManagementTimePeriod Type Values: 0 notApplicable 1 t15min 2 t24h 4 all 5 t1min 6 t1h	.1.3.6.1.4.1.42229.1.2.1.6.1.1.5
standingConditionServiceAffect Indicates if an alarm is service affecting or non-service affecting. NSA indicates non-service affecting. SA indicates service affecting.	CoriantFmtypesServiceAffectFm Type Values: 1 sa 2 nsa	.1.3.6.1.4.1.42229.1.2.1.6.1.1.6
standingConditionSeverityLevel Indicates the notification code (severity level) associated with the alarm type of service affecting.	CoriantFmtypesSeverityLevel Type Values: 0 notApplicable 1 critical 2 major 3 minor 4 notAlarmed 5 notReported 6 cleared	.1.3.6.1.4.1.42229.1.2.1.6.1.1.7
standingConditionOccurrenceDateTime Indicates the occurrence date and time of the alarm by the month of the year, the day of the month, hour of the day, the minute of the hour, and the second of the minute.	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.1.6.1.1.8
standingConditionConditionDescription Describes the condition that caused the alarm.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.1.6.1.1.9
standingConditionFmEntityType Indicates the entity type the condition associated, which provides additional information for the object instance having the condition. entity type is not exactly same as MO. Entity type have smaller granularity referri…	CoriantFmtypesEntityTypeFm Type Values: 1 t10gbe 2 t40gbe 3 t100gbe 4 ochOs 5 otu4 6 otuc2 7 otuc3 8 oduc2 9 oduc3 10 odu4 11 odu3 12 odu2e 13 odu2 14 shelf 15 slot 16 port 17 fan 18 chm1 19 chm2 20 bfm 21 mgteth 22 ntppeer 23 db 24 sw 25 log 26 security 27 psu 28 cfp2 29 qsfp 30 time 31 user 32 ztc 33 ppp 34 fc8g 35 fc16g 36 oduflex 37 otu2 38 otu2e 39 oc192 40 stm64 41 oms 42 gopt 43 paoscofp2 44 pabaofp2 45 pairofp2 46 palrofp2 47 paerofp2 48 bahofp2 50 subslot 51 occ2 52 omd96 53 amplifier 54 omd48S 55 omd48O 56 chm1g 57 tdcmofp2 58 bauofp2 59 paulrofp2 60 osc 61 ots 62 sfpplus 63 xtm2 64 omd8b1ofp2 65 omd8b2ofp2 66 opsofp2 67 ops 68 chm1lh 69 chm2lh 70 t10gwanSonet 71 t10gwanSdh 72 otdrofp2 73 ocmofp2 74 och 75 otuc6 76 oduc6 77 otuc5 78 oduc5 79 otuc4 80 oduc4 81 chm2t 82 opsptofp2 83 frcu 84 cad8ofp2 85 cad8eofp2 86 omd64 87 t400gbe 88 ws04sofp2 89 cad16aofp2 90 baxofp2 91 nmc 92 t1gbe 93 oc48 94 stm16 95 utm2 96 rd09sm 97 omd48e 99 otuc7 100 oduc7 101 otuc9 102 oduc9 103 otuc11 104 oduc11 105 odu0 106 odu1 107 dge2m2ofp2 108 pbmtpp 109 cfp2Dco 110 subport 111 sfp 112 ipsec	.1.3.6.1.4.1.42229.1.2.1.6.1.1.10
standingConditionAlarmId A system assigned unique identified to the alarm.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.1.6.1.1.11

shelfPowerConsumptionTable

table

.1.3.6.1.4.1.42229.1.2.2.9.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk shelfPowerConsumptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::shelfPowerConsumptionTable'

Copy

NULL

shelfPowerConsumptionEntry row .1.3.6.1.4.1.42229.1.2.2.9.1.1

Entry of shelfPowerConsumptionTable

Indexes

shelfPowerConsumptionShelfEntity shelfPowerConsumptionMagic

Column	Syntax	OID
shelfPowerConsumptionShelfEntity NULL	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.2.9.1.1.1
shelfPowerConsumptionMagic NULL	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.2.9.1.1.2
shelfPowerConsumptionPowerConsumptionCurrent Current power consumption of the system.	CoriantTypesPower	.1.3.6.1.4.1.42229.1.2.2.9.1.1.3
shelfPowerConsumptionPowerConsumptionEstimatedMax Derived maximal power consumption around room temperature.	CoriantTypesPower	.1.3.6.1.4.1.42229.1.2.2.9.1.1.4

multishelfFileManagementTable

table

.1.3.6.1.4.1.42229.1.2.2.11.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk multishelfFileManagementTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::multishelfFileManagementTable'

Copy

multishelf-file-management YANG models

multishelfFileManagementEntry row .1.3.6.1.4.1.42229.1.2.2.11.1.1

Entry of multishelfFileManagementTable

Indexes

multishelfFileManagementShelfId

Column	Syntax	OID
multishelfFileManagementShelfId NULL	CoriantTypesShelfId Type Constraints: range: 1..65535	.1.3.6.1.4.1.42229.1.2.2.11.1.1.1

deleteFileTable

table

.1.3.6.1.4.1.42229.1.2.2.12.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk deleteFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::deleteFileTable'

Copy

NULL

deleteFileEntry row .1.3.6.1.4.1.42229.1.2.2.12.1.1

Entry of deleteFileTable

Indexes

multishelfFileManagementShelfId

Column	Syntax	OID
deleteFileFileName NULL	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.2.12.1.1.1
deleteFileResult NULL	Enumeration Enumerated Values: 0 successful 1 failed 2 unknown	.1.3.6.1.4.1.42229.1.2.2.12.1.1.2
deleteFileResultMsg NULL	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.2.12.1.1.3

showFileTable

table

.1.3.6.1.4.1.42229.1.2.2.13.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk showFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::showFileTable'

Copy

NULL

showFileEntry row .1.3.6.1.4.1.42229.1.2.2.13.1.1

Entry of showFileTable

Indexes

multishelfFileManagementShelfId

Column	Syntax	OID
showFileFileName NULL	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.2.13.1.1.1
showFileResult NULL	Enumeration Enumerated Values: 0 successful 1 failed 2 unknown	.1.3.6.1.4.1.42229.1.2.2.13.1.1.2
showFileResultMsg NULL	OctetString Constraints: range: 0-511	.1.3.6.1.4.1.42229.1.2.2.13.1.1.3

fileTransferTable

table

.1.3.6.1.4.1.42229.1.2.2.14.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk fileTransferTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::fileTransferTable'

Copy

NULL

fileTransferEntry row .1.3.6.1.4.1.42229.1.2.2.14.1.1

Entry of fileTransferTable

Indexes

multishelfFileManagementShelfId

Column	Syntax	OID
fileTransferAction NULL	Enumeration Enumerated Values: 1 upload 2 download	.1.3.6.1.4.1.42229.1.2.2.14.1.1.1
fileTransferLocalFilePath NULL	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.2.14.1.1.2
fileTransferRemoteFilePath NULL	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.2.14.1.1.3
fileTransferResult NULL	Enumeration Enumerated Values: 0 successful 1 failed 2 unknown	.1.3.6.1.4.1.42229.1.2.2.14.1.1.4
fileTransferResultMsg NULL	OctetString Constraints: range: 0-511	.1.3.6.1.4.1.42229.1.2.2.14.1.1.5
fileTransferExeResult NULL	Enumeration Enumerated Values: 0 successful 1 failed 2 unknown	.1.3.6.1.4.1.42229.1.2.2.14.1.1.6
fileTransferExeResultMsg NULL	OctetString Constraints: range: 0-511	.1.3.6.1.4.1.42229.1.2.2.14.1.1.7

multishelfSwManagementTable

table

.1.3.6.1.4.1.42229.1.2.2.15.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk multishelfSwManagementTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::multishelfSwManagementTable'

Copy

multishelf-sw-management YANG models

multishelfSwManagementEntry row .1.3.6.1.4.1.42229.1.2.2.15.1.1

Entry of multishelfSwManagementTable

Indexes

multishelfSwManagementShelfId

Column	Syntax	OID
multishelfSwManagementShelfId NULL	CoriantTypesShelfId Type Constraints: range: 1..65535	.1.3.6.1.4.1.42229.1.2.2.15.1.1.1

swStageNotificationTable

table

.1.3.6.1.4.1.42229.1.2.2.16.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk swStageNotificationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::swStageNotificationTable'

Copy

NULL

swStageNotificationEntry row .1.3.6.1.4.1.42229.1.2.2.16.1.1

Entry of swStageNotificationTable

Indexes

multishelfSwManagementShelfId

Column	Syntax	OID
swStageNotificationStatus Successful or Failed	Enumeration Enumerated Values: 1 successful 2 failed	.1.3.6.1.4.1.42229.1.2.2.16.1.1.1
swStageNotificationStatusMessage Gives a more detailed status	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.2.16.1.1.2
swStageNotificationStageState NULL	Enumeration Enumerated Values: 0 default 1 staging 2 staged	.1.3.6.1.4.1.42229.1.2.2.16.1.1.3

swActivateNotificationTable

table

.1.3.6.1.4.1.42229.1.2.2.17.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk swActivateNotificationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::swActivateNotificationTable'

Copy

NULL

swActivateNotificationEntry row .1.3.6.1.4.1.42229.1.2.2.17.1.1

Entry of swActivateNotificationTable

Indexes

multishelfSwManagementShelfId

Column	Syntax	OID
swActivateNotificationActivateNotificationType Successful or Failed	Enumeration Enumerated Values: 1 activate 2 commit 3 cancel	.1.3.6.1.4.1.42229.1.2.2.17.1.1.1
swActivateNotificationStatus Successful or Failed	Enumeration Enumerated Values: 1 successful 2 failed	.1.3.6.1.4.1.42229.1.2.2.17.1.1.2
swActivateNotificationStatusMessage Gives a more detailed status	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.2.17.1.1.3
swActivateNotificationActivateState NULL	Enumeration Enumerated Values: 0 default 1 beforeReset 2 afterReset	.1.3.6.1.4.1.42229.1.2.2.17.1.1.4
swActivateNotificationUpgradeResult NULL	Enumeration Enumerated Values: 0 default 1 successful 2 failed 3 rollback	.1.3.6.1.4.1.42229.1.2.2.17.1.1.5

multishelfDiscoveryTable

table

.1.3.6.1.4.1.42229.1.2.2.18.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk multishelfDiscoveryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::multishelfDiscoveryTable'

Copy

NULL

multishelfDiscoveryEntry row .1.3.6.1.4.1.42229.1.2.2.18.1.1

Entry of multishelfDiscoveryTable

Indexes

multishelfDiscoveryShelfSerialNumber

Column	Syntax	OID
multishelfDiscoveryShelfSerialNumber IP Address of device	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.2.18.1.1.1
multishelfDiscoveryShelfMacAddress The MAC address of the shelf	OctetString	.1.3.6.1.4.1.42229.1.2.2.18.1.1.2
multishelfDiscoveryShelfStatus NULL	Enumeration Enumerated Values: 0 offline 1 online 2 shelfidallocating 3 waitdbready 4 idle 5 swupgrade 6 keepsilent	.1.3.6.1.4.1.42229.1.2.2.18.1.1.3
multishelfDiscoveryShelfId Identifier of the shelf after assigned by the system.	CoriantTypesShelfId Type Constraints: range: 1..65535	.1.3.6.1.4.1.42229.1.2.2.18.1.1.4

shelfTable

table

.1.3.6.1.4.1.42229.1.2.3.1.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk shelfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::shelfTable'

Copy

NULL

shelfEntry row .1.3.6.1.4.1.42229.1.2.3.1.1.1

Entry of shelfTable

Indexes

shelfId

Column	Syntax	OID
shelfId Identifier of the shelf. It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf.	CoriantTypesShelfId Type Constraints: range: 1..65535	.1.3.6.1.4.1.42229.1.2.3.1.1.1.1
shelfLocation Name of the location of this particular shelf.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.1.1.1.2
shelfInletTemperature shelf inlet temperature	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.1.1.1.3
shelfOutletTemperature shelf outlet temperature	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.1.1.1.4
shelfAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.1.1.1.5
shelfOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.1.1.1.6
shelfAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.1.1.1.7
shelfAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.1.1.1.8
shelfType Type of the shelf.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.1.1.1.9
shelfSerialNumber Serial number of the shelf.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.1.1.1.13

slotTable

table

.1.3.6.1.4.1.42229.1.2.3.2.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk slotTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::slotTable'

Copy

NULL

slotEntry row .1.3.6.1.4.1.42229.1.2.3.2.1.1

Entry of slotTable

Indexes

shelfId slotId

Column	Syntax	OID
slotId Identifier of the slot. It shall be an integer number and assigned implicitly by the system.	CoriantTypesSlotId	.1.3.6.1.4.1.42229.1.2.3.2.1.1.1
slotActualCardType Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty	CoriantTypesEquipmentType Type Values: 0 empty 1 filled 2 reserved 3 unrecognized 4 notApplicable 11 fan 12 psu 13 chm1 14 chm2 15 bfm 16 xtm2 17 chm1g 18 chm1lh 19 chm2lh 20 utm2 21 qsfp 22 cfp2 23 sfpplus 24 sfp 25 cfp2Dco 100 occ2 101 omd96 102 paoscofp2 103 pabaofp2 104 pairofp2 105 palrofp2 106 paerofp2 107 bahofp2 109 omd48S 110 omd48O 111 tdcmofp2 112 bauofp2 113 paulrofp2 114 omd8b1ofp2 115 omd8b2ofp2 116 opsofp2 117 otdrofp2 118 ocmofp2 119 opsptofp2 120 chm2t 121 frcu 122 cad8ofp2 123 cad8eofp2 124 omd64 125 ws04sofp2 126 cad16aofp2 127 baxofp2 128 rd09sm 129 omd48e 130 dge2m2ofp2 131 pbmtpp 200 virSim	.1.3.6.1.4.1.42229.1.2.3.2.1.1.2
slotPossibleCardTypes Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.3.2.1.1.3
slotAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.2.1.1.4
slotOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.2.1.1.5
slotAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.2.1.1.6
slotAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.2.1.1.7

cardTable

table

.1.3.6.1.4.1.42229.1.2.3.3.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk cardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::cardTable'

Copy

Card is a container carried by a slot.

cardEntry row .1.3.6.1.4.1.42229.1.2.3.3.1.1

Entry of cardTable

Indexes

shelfId slotId

Column	Syntax	OID
cardRequiredType The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.	CoriantTypesCardType Type Values: 11 fan 12 psu 13 chm1 14 chm2 16 xtm2 17 chm1g 18 chm1lh 19 chm2lh 20 utm2 100 occ2 101 omd96 102 paoscofp2 103 pabaofp2 104 pairofp2 105 palrofp2 106 paerofp2 107 bahofp2 109 omd48S 110 omd48O 111 tdcmofp2 112 bauofp2 113 paulrofp2 114 omd8b1ofp2 115 omd8b2ofp2 116 opsofp2 117 otdrofp2 118 ocmofp2 119 opsptofp2 120 chm2t 121 frcu 122 cad8ofp2 123 cad8eofp2 124 omd64 125 ws04sofp2 126 cad16aofp2 127 baxofp2 128 rd09sm 129 omd48e 130 dge2m2ofp2 131 pbmtpp 200 virSim	.1.3.6.1.4.1.42229.1.2.3.3.1.1.1
cardEquipmentName The attribute indicates an additional field to identify the module.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.3.1.1.2
cardAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.3.1.1.3
cardOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.3.1.1.4
cardAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.3.1.1.5
cardAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.3.1.1.6
cardFanSpeedRate The fan speed of percentage. Conditions:../required-type = 'FAN'	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.3.3.1.1.7
cardSwitchingType The traffic switching type of card. Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') and (../required-type != 'FRCU') and (../required-type != 'VIR-SIM') default value :otn	Enumeration Enumerated Values: 0 otn 1 tdm 2 optical 3 packet 4 opticalRouter 5 amplifier 6 omd 7 cad 8 notApplicable 9 otnTransponder	.1.3.6.1.4.1.42229.1.2.3.3.1.1.8
cardTemperature Temperature at the monitoring point.	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.3.1.1.9
cardMode Specify the card mode, e.g. normal or regen. default value :normal	Enumeration Enumerated Values: 0 notApplicable 1 normal 2 regen 3 mixFunction 4 greyMuxponder	.1.3.6.1.4.1.42229.1.2.3.3.1.1.10

subslotTable

table

.1.3.6.1.4.1.42229.1.2.3.4.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk subslotTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::subslotTable'

Copy

NULL

subslotEntry row .1.3.6.1.4.1.42229.1.2.3.4.1.1

Entry of subslotTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
subslotId Identifier of the subslot.	CoriantTypesSlotId	.1.3.6.1.4.1.42229.1.2.3.4.1.1.1
subslotActualCardType Equipment type for each slot/subslot according to the actually equipping. Needs to be re-defined in the project specific model. default value :empty	CoriantTypesEquipmentType Type Values: 0 empty 1 filled 2 reserved 3 unrecognized 4 notApplicable 11 fan 12 psu 13 chm1 14 chm2 15 bfm 16 xtm2 17 chm1g 18 chm1lh 19 chm2lh 20 utm2 21 qsfp 22 cfp2 23 sfpplus 24 sfp 25 cfp2Dco 100 occ2 101 omd96 102 paoscofp2 103 pabaofp2 104 pairofp2 105 palrofp2 106 paerofp2 107 bahofp2 109 omd48S 110 omd48O 111 tdcmofp2 112 bauofp2 113 paulrofp2 114 omd8b1ofp2 115 omd8b2ofp2 116 opsofp2 117 otdrofp2 118 ocmofp2 119 opsptofp2 120 chm2t 121 frcu 122 cad8ofp2 123 cad8eofp2 124 omd64 125 ws04sofp2 126 cad16aofp2 127 baxofp2 128 rd09sm 129 omd48e 130 dge2m2ofp2 131 pbmtpp 200 virSim	.1.3.6.1.4.1.42229.1.2.3.4.1.1.2
subslotPossibleCardTypes Defined all the equipment types which can be installed on the slot/subslot. This is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.3.4.1.1.3
subslotAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.4.1.1.4
subslotOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.4.1.1.5
subslotAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.4.1.1.6
subslotAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.4.1.1.7

subcardTable

table

.1.3.6.1.4.1.42229.1.2.3.5.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk subcardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::subcardTable'

Copy

Subcard is a container carried by a subslot.

subcardEntry row .1.3.6.1.4.1.42229.1.2.3.5.1.1

Entry of subcardTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
subcardRequiredType The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.	CoriantTypesCardType Type Values: 11 fan 12 psu 13 chm1 14 chm2 16 xtm2 17 chm1g 18 chm1lh 19 chm2lh 20 utm2 100 occ2 101 omd96 102 paoscofp2 103 pabaofp2 104 pairofp2 105 palrofp2 106 paerofp2 107 bahofp2 109 omd48S 110 omd48O 111 tdcmofp2 112 bauofp2 113 paulrofp2 114 omd8b1ofp2 115 omd8b2ofp2 116 opsofp2 117 otdrofp2 118 ocmofp2 119 opsptofp2 120 chm2t 121 frcu 122 cad8ofp2 123 cad8eofp2 124 omd64 125 ws04sofp2 126 cad16aofp2 127 baxofp2 128 rd09sm 129 omd48e 130 dge2m2ofp2 131 pbmtpp 200 virSim	.1.3.6.1.4.1.42229.1.2.3.5.1.1.1
subcardEquipmentName The attribute indicates an additional field to identify the module.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.5.1.1.2
subcardAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.5.1.1.3
subcardOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.5.1.1.4
subcardAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.5.1.1.5
subcardAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.5.1.1.6
subcardTemperature Temperature at the monitoring point.	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.5.1.1.7
subcardSwitchingType The traffic switching type of card. Conditions:(../required-type != 'FAN') and (../required-type != 'PSU') and (../required-type != 'FRCU') and (../required-type != 'VIR-SIM') default value :otn	Enumeration Enumerated Values: 0 otn 1 tdm 2 optical 3 packet 4 opticalRouter 5 amplifier 6 omd 7 cad 8 notApplicable 9 otnTransponder	.1.3.6.1.4.1.42229.1.2.3.5.1.1.11

portTable

table

.1.3.6.1.4.1.42229.1.2.3.6.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk portTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::portTable'

Copy

NULL

portEntry row .1.3.6.1.4.1.42229.1.2.3.6.1.1

Entry of portTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
portId The identifier is defined to uniquely identify the port.	CoriantTypesPortId	.1.3.6.1.4.1.42229.1.2.3.6.1.1.1
portPossiblePluggableTypes Defined all the pluggable types which can be equipped on the port. Needs to be re-defined in the project specific model. This is a leaf list, encode by some leafs. Conditions:(../port-type != 'optical') and (../port-t…	OctetString	.1.3.6.1.4.1.42229.1.2.3.6.1.1.2
portActualPluggableType Pluggable type for each port according to the actually equipping. Needs to be re-defined in the project specific model. Conditions:(../port-type != 'optical') and (../port-type != 'ocm') and (../port-ty…	CoriantTypesEquipmentType Type Values: 0 empty 1 filled 2 reserved 3 unrecognized 4 notApplicable 11 fan 12 psu 13 chm1 14 chm2 15 bfm 16 xtm2 17 chm1g 18 chm1lh 19 chm2lh 20 utm2 21 qsfp 22 cfp2 23 sfpplus 24 sfp 25 cfp2Dco 100 occ2 101 omd96 102 paoscofp2 103 pabaofp2 104 pairofp2 105 palrofp2 106 paerofp2 107 bahofp2 109 omd48S 110 omd48O 111 tdcmofp2 112 bauofp2 113 paulrofp2 114 omd8b1ofp2 115 omd8b2ofp2 116 opsofp2 117 otdrofp2 118 ocmofp2 119 opsptofp2 120 chm2t 121 frcu 122 cad8ofp2 123 cad8eofp2 124 omd64 125 ws04sofp2 126 cad16aofp2 127 baxofp2 128 rd09sm 129 omd48e 130 dge2m2ofp2 131 pbmtpp 200 virSim	.1.3.6.1.4.1.42229.1.2.3.6.1.1.3
portRxOpticalPower Received optical power	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.6.1.1.4
portTxOpticalPower Transmitted optical power	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.6.1.1.5
portRxOpticalPowerSelectedChannel Optical power of the selected channel on coherent receiver, which will be different from the rx-optical-power when multiple channels input simultaneously.	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.6.1.1.6
portDirectionType Supported direction of the optical port.	CoriantTypesTypeOfDirection Type Values: 0 notApplicable 2 tx 3 rx 4 rxtx	.1.3.6.1.4.1.42229.1.2.3.6.1.1.15
portName The name of the port. default value :unspecified	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.3.6.1.1.16
portType The type of port. Needs to be provided upon Port creation default value :optical-nomon	Enumeration Enumerated Values: 1 client 2 line 3 clientSubport 4 optical 5 otdr 6 opticalNomon 7 ocm 8 osc 9 mgmtEth	.1.3.6.1.4.1.42229.1.2.3.6.1.1.17
portMode The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible va…	CoriantTypesPortMode Type Values: 0 notApplicable 1 t10gbe 2 t40gbe 3 t100gbe 4 subport 5 qpsk100g 6 t8qam300g 7 t16qam200g 8 fc16g 9 fc8g 10 otu4 12 otu2 13 otu2e 14 oc192 15 stm64 16 ochosOtu2 17 ochosOtu2e 18 t8qam200g 19 t10gwanSonet 20 t10gwanSdh 21 t64qam600g 22 t400gbe 23 spqpsk100g 24 spqpskQpsk100g 25 qpsk200g 26 sp16qam200g 27 t32qam200g 28 qpskSp16qam200g 29 t16qam300g 30 sp16qam300g 31 t32qam300g 32 t64qam300g 33 sp16qam16qam300g 34 t16qam400g 35 t32qam400g 36 t64qam400g 37 t16qam32qam400g 38 t32qam500g 39 t64qam500g 40 t32qam64qam500g 41 otu4Transparent 42 qpsk100gTransparent 43 sp16qam16qam200g 44 t32qam64qam600g 45 t1gbe 46 oc48 47 stm16 48 sp16qam300gC 49 qpskSp16qam300gC 50 t16qam32qam500gC 51 t16qam500gC 52 sp16qam500gC 53 qpskSp16qam500gC 54 t32qam64qam700gC 55 t16qam700gC 56 sp16qam16qam700gC 57 t32qam900gC 58 t16qam32qam900gC 59 t32qam64qam1100gC 60 spqpskQpsk200g 61 qpskSp16qam300g 62 sp16qam16qam400g 63 t16qam32qam500g	.1.3.6.1.4.1.42229.1.2.3.6.1.1.18
portAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.6.1.1.19
portOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.6.1.1.20
portAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.6.1.1.21
portAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.6.1.1.22
portServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.3.6.1.1.23
portConnectedTo Indicate neighbour port/facility entity to which the current port/facility is connected to.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.3.6.1.1.24
portArcConfig The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi	Enumeration Enumerated Values: 1 alm 2 nalmQi 3 nalm	.1.3.6.1.4.1.42229.1.2.3.6.1.1.25
portArcState The current mode of the Alarm Report Control (ARC). default value :nalm-qi	Enumeration Enumerated Values: 1 alm 2 nalmQi 3 nalm	.1.3.6.1.4.1.42229.1.2.3.6.1.1.26
portArcSubState Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr	Enumeration Enumerated Values: 0 notApplicable 1 nalmCd 2 nalmNr	.1.3.6.1.4.1.42229.1.2.3.6.1.1.27
portArcTimer The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440	Unsigned32 Constraints: range: 0-10080	.1.3.6.1.4.1.42229.1.2.3.6.1.1.28
portArcRemainingTime The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported. default value :00d-00h:00m:00s	OctetString	.1.3.6.1.4.1.42229.1.2.3.6.1.1.29
portExternalConnectivity Indicates the port is connected externally or not. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.3.6.1.1.30

subportTable

table

.1.3.6.1.4.1.42229.1.2.3.7.1 · 1 row entry · 19 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk subportTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::subportTable'

Copy

NULL

subportEntry row .1.3.6.1.4.1.42229.1.2.3.7.1.1

Entry of subportTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
subportId The identifier is defined to uniquely identify the subport.	CoriantTypesPortId	.1.3.6.1.4.1.42229.1.2.3.7.1.1.1
subportPortName The name of the port. default value :unspecified	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.3.7.1.1.2
subportPortType The type of port. Needs to be provided upon Port creation default value :optical-nomon	Enumeration Enumerated Values: 1 client 2 line 3 clientSubport 4 optical 5 otdr 6 opticalNomon 7 ocm 8 osc 9 mgmtEth	.1.3.6.1.4.1.42229.1.2.3.7.1.1.3
subportPortMode The working mode of port. For client side: CHM1: applicable to port 3 to 6; possible values are: 100GBE, not-applicable. Default is 100GBE when card created. CHM2: applicable to port 3 to 11; possible va…	CoriantTypesPortMode Type Values: 0 notApplicable 1 t10gbe 2 t40gbe 3 t100gbe 4 subport 5 qpsk100g 6 t8qam300g 7 t16qam200g 8 fc16g 9 fc8g 10 otu4 12 otu2 13 otu2e 14 oc192 15 stm64 16 ochosOtu2 17 ochosOtu2e 18 t8qam200g 19 t10gwanSonet 20 t10gwanSdh 21 t64qam600g 22 t400gbe 23 spqpsk100g 24 spqpskQpsk100g 25 qpsk200g 26 sp16qam200g 27 t32qam200g 28 qpskSp16qam200g 29 t16qam300g 30 sp16qam300g 31 t32qam300g 32 t64qam300g 33 sp16qam16qam300g 34 t16qam400g 35 t32qam400g 36 t64qam400g 37 t16qam32qam400g 38 t32qam500g 39 t64qam500g 40 t32qam64qam500g 41 otu4Transparent 42 qpsk100gTransparent 43 sp16qam16qam200g 44 t32qam64qam600g 45 t1gbe 46 oc48 47 stm16 48 sp16qam300gC 49 qpskSp16qam300gC 50 t16qam32qam500gC 51 t16qam500gC 52 sp16qam500gC 53 qpskSp16qam500gC 54 t32qam64qam700gC 55 t16qam700gC 56 sp16qam16qam700gC 57 t32qam900gC 58 t16qam32qam900gC 59 t32qam64qam1100gC 60 spqpskQpsk200g 61 qpskSp16qam300g 62 sp16qam16qam400g 63 t16qam32qam500g	.1.3.6.1.4.1.42229.1.2.3.7.1.1.4
subportAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.7.1.1.5
subportOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.7.1.1.6
subportAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.7.1.1.7
subportAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.7.1.1.8
subportServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.3.7.1.1.9
subportConnectedTo Indicate neighbour port/facility entity to which the current port/facility is connected to.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.3.7.1.1.10
subportArcConfig The configurable mode of the Alarm Report Control (ARC). default value :nalm-qi	Enumeration Enumerated Values: 1 alm 2 nalmQi 3 nalm	.1.3.6.1.4.1.42229.1.2.3.7.1.1.11
subportArcState The current mode of the Alarm Report Control (ARC). default value :nalm-qi	Enumeration Enumerated Values: 1 alm 2 nalmQi 3 nalm	.1.3.6.1.4.1.42229.1.2.3.7.1.1.12
subportArcSubState Additional information about the Alarm Report Control (ARC) when the main state is in the NALM-QI state default value :nalm-nr	Enumeration Enumerated Values: 0 notApplicable 1 nalmCd 2 nalmNr	.1.3.6.1.4.1.42229.1.2.3.7.1.1.13
subportArcTimer The holdoff timer value in minutes of the ARC. Range is 0 - 10080 minutes UNITS:minutes default value :1440	Unsigned32 Constraints: range: 0-10080	.1.3.6.1.4.1.42229.1.2.3.7.1.1.14
subportArcRemainingTime The remaining timer value (format: xxd-xxh:xxm:xxs) before the alarm is reported. default value :00d-00h:00m:00s	OctetString	.1.3.6.1.4.1.42229.1.2.3.7.1.1.15
subportRxOpticalPower Received optical power	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.7.1.1.16
subportTxOpticalPower Transmitted optical power	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.7.1.1.17
subportExternalConnectivity Indicates the port is connected externally or not. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.3.7.1.1.18
subportDirectionType Supported direction of the optical port.	CoriantTypesTypeOfDirection Type Values: 0 notApplicable 2 tx 3 rx 4 rxtx	.1.3.6.1.4.1.42229.1.2.3.7.1.1.19

pluggableTable

table

.1.3.6.1.4.1.42229.1.2.3.8.1 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pluggableTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pluggableTable'

Copy

Represents the Pluggable object

pluggableEntry row .1.3.6.1.4.1.42229.1.2.3.8.1.1

Entry of pluggableTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
pluggableRequiredType The attribute indicates the equipment type to identify the module. Needs to be re-defined in the project specific model.	CoriantTypesPluggableType Type Values: 20 nonPluggable 21 qsfp 22 cfp2 23 sfpplus 24 sfp 25 cfp2Dco	.1.3.6.1.4.1.42229.1.2.3.8.1.1.1
pluggableFormFactor Indicating the exact form factor of the pluggable. default value :Unrecognized	CoriantTypesPluggableFormFactor Type Values: 0 notApplicable 1 unrecognized 2 qsfpplus 3 qsfp28 4 cfp2Aco 5 sfpplus 6 sfp 7 xfp 8 qsfpDd 9 cfp2Dco	.1.3.6.1.4.1.42229.1.2.3.8.1.1.2
pluggableInterfaceType Indicating interface type of the pluggable. default value :	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.8.1.1.3
pluggableLaserSource The type of laser frequency. Only tx-lo-independent type support och-os rx-frequency working Conditions:../required-type = 'CFP2' default value :not-available	Enumeration Enumerated Values: 1 txLoShared 2 txLoIndependent 3 notAvailable	.1.3.6.1.4.1.42229.1.2.3.8.1.1.4
pluggableHwVersion The attribute Identifies the Hardware Version of the module that populates the slot.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.42229.1.2.3.8.1.1.5
pluggableVendor Vendor information.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.8.1.1.6
pluggableSerialNumber This is the value of serial number stored in EEPROM of the equipment.	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.3.8.1.1.7
pluggableFwVersion Current Firmware (FW) version on the equipment.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.42229.1.2.3.8.1.1.8
pluggablePartNumber Identifies the Part Number of the equipment.	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.3.8.1.1.9
pluggableClei Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintage…	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.3.8.1.1.10
pluggableEquipmentName The attribute indicates an additional field to identify the module.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.8.1.1.11
pluggableAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.8.1.1.12
pluggableOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.8.1.1.13
pluggableAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.8.1.1.14
pluggableAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.8.1.1.15
pluggableTemperature Temperature at the monitoring point.	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.8.1.1.16
pluggableVoltage The current voltage applied by the module. The current is expressed in V with up to two decimal precision. Just supply the instant value. UNITS:V	OctetString	.1.3.6.1.4.1.42229.1.2.3.8.1.1.17

amplifierTable

table

.1.3.6.1.4.1.42229.1.2.3.9.1 · 1 row entry · 30 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk amplifierTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::amplifierTable'

Copy

The list of optical amplifier on an equipment.

amplifierEntry row .1.3.6.1.4.1.42229.1.2.3.9.1.1

Entry of amplifierTable

Indexes

shelfId slotId subslotId amplifierName

Column	Syntax	OID
amplifierName User-defined name assigned to identify a specific amplifier in the device	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.3.9.1.1.1
amplifierSupportingInputPort Identifier of the supporting input port.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.3.9.1.1.2
amplifierSupportingOutputPort Identifier of the supporting output port.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.3.9.1.1.3
amplifierAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.9.1.1.4
amplifierOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.9.1.1.5
amplifierAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.9.1.1.6
amplifierAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.9.1.1.7
amplifierEnable Configuration for enable or disable the amplifier. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.3.9.1.1.8
amplifierInputLosShutdown Enable or disable the function of automatic shutdown per input LOS. default value :enabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.3.9.1.1.9
amplifierControlMode Control mode of the amplifier. default value :auto-max-pw	Enumeration Enumerated Values: 1 manual 2 auto 3 autoMaxPw	.1.3.6.1.4.1.42229.1.2.3.9.1.1.10
amplifierMode The operating mode of the amplifier default value :constant-gain	Enumeration Enumerated Values: 1 constantPower 2 constantGain	.1.3.6.1.4.1.42229.1.2.3.9.1.1.11
amplifierType Type of the amplifier. default value :variable-gain-EDFA	Enumeration Enumerated Values: 1 fixedGainEdfa 2 variableGainEdfa	.1.3.6.1.4.1.42229.1.2.3.9.1.1.12
amplifierTargetGain Setting gain to the amplifier for constant-gain mode in manual control mode.	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.9.1.1.13
amplifierOperatingGain Operating gain of the amplifier, which is the actually configured gain on the amplifier.	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.9.1.1.14
amplifierGainAdjustment The value is used for adjustment of gain when the amplifier in automatic control mode, the automatically caculated gain will include offset of this attribute. default value :0.0	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.9.1.1.15
amplifierOutputPowerMon Monitored aggregation signal output power. UNITS:dBm	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.9.1.1.18
amplifierOutputPowerMonWithAse Monitored aggregation total output power including both signal and ASE. UNITS:dBm	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.9.1.1.19
amplifierInputPowerMon Monitored aggregation input power. UNITS:dBm	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.9.1.1.20
amplifierOutputVoa Configurable optical attenuation at output of the amplifier. default value :0.0	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.9.1.1.21
amplifierPowerBeforeOutputVoa Monitored optical power after output VOA. UNITS:dBm	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.9.1.1.22
amplifierGainTilt Specify gain tilt of the amplifier. default value :0.0	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.9.1.1.23
amplifierTiltControlMode Specify gain tilt control modes. default value :manual	Enumeration Enumerated Values: 1 manual 2 auto 3 autoPlanned	.1.3.6.1.4.1.42229.1.2.3.9.1.1.24
amplifierActualGainTilt Actually setting of gain tilt on the amplifier. default value :0.0	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.9.1.1.25
amplifierPumpStatus The amplifier's pump working status, enable or disable default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.3.9.1.1.26
amplifierGainRangeControl The gain range working mode for multi gain range supported amplifier default value :auto	Enumeration Enumerated Values: 1 manual 2 auto	.1.3.6.1.4.1.42229.1.2.3.9.1.1.27
amplifierTargetGainRange The gain-range selected one for manual gain-range-mode default value :standard	AmplifierGainRangeType Type Values: 1 standard 2 low 3 high 4 notAvailable	.1.3.6.1.4.1.42229.1.2.3.9.1.1.28
amplifierWorkingGainRange The current working gain range default value :not-available	AmplifierGainRangeType Type Values: 1 standard 2 low 3 high 4 notAvailable	.1.3.6.1.4.1.42229.1.2.3.9.1.1.29
amplifierActualOutputVoa Working optical attenuation at output of the amplifier. default value :0.0	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.9.1.1.30
amplifierPartnerAmp The partner amplifier for in line amplifier working mode. default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.3.9.1.1.31
amplifierEgressAverageChannelPower Based upon the total max power across the 4.8 THz passband. Defined as optional for ODL support, but shall be considered as mandatory and provided by the controller when the control-mode is set to gainLoss for amplifier…	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.9.1.1.32

tdcTable

table

.1.3.6.1.4.1.42229.1.2.3.10.1 · 1 row entry · 17 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk tdcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::tdcTable'

Copy

The list of optical tdc on an equipment.

tdcEntry row .1.3.6.1.4.1.42229.1.2.3.10.1.1

Entry of tdcTable

Indexes

shelfId slotId subslotId tdcName

Column	Syntax	OID
tdcName User-defined name assigned to identify a specific tdc in the device	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.3.10.1.1.1
tdcSupportingInputPort Identifier of the supporting input port.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.3.10.1.1.2
tdcSupportingOutputPort Identifier of the supporting output port.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.3.10.1.1.3
tdcAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.10.1.1.4
tdcOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.10.1.1.5
tdcAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.10.1.1.6
tdcAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.10.1.1.7
tdcMode Control mode of the tunable dispersion compensation; Manual: CD value will be decided per configured CD value; Auto: system will automatically decide the CD value per measured chromatic dispersion in the span. …	Enumeration Enumerated Values: 1 manual 2 auto	.1.3.6.1.4.1.42229.1.2.3.10.1.1.8
tdcReferenceFrequency Indicating the reference wavelength of the TDC. UNITS:MHz	CoriantTypesFreq Type Constraints: range: 0 range: 191250000..196111250	.1.3.6.1.4.1.42229.1.2.3.10.1.1.9
tdcActualReferenceFrequency Indicating the actual reference wavelength of the TDC. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.10.1.1.10
tdcFrequencyRangeMin The minimum of supported wavelength. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.10.1.1.11
tdcFrequencyRangeMax The maximum of supported wavelength. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.10.1.1.12
tdcChromaticDispersion The setting value of Chromatic Dispersion. UNITS:ps/nm default value :0	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.3.10.1.1.13
tdcChromaticDispersionAdjustment The value will be used to adjust target chromatic dispersion by adding the value with auto decided dispersion in auto tdc mode. UNITS:ps/nm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.3.10.1.1.14
tdcActualChromaticDispersion The actual value of Chromatic Dispersion. UNITS:ps/nm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.3.10.1.1.15
tdcCdRangeMin The minimum of supported chromatic dispersion. UNITS:ps/nm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.3.10.1.1.16
tdcCdRangeMax The maximum of supported chromatic dispersion. UNITS:ps/nm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.3.10.1.1.17

inventoryTable

table

.1.3.6.1.4.1.42229.1.2.3.12.1 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inventoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inventoryTable'

Copy

NULL

inventoryEntry row .1.3.6.1.4.1.42229.1.2.3.12.1.1

Entry of inventoryTable

Indexes

inventoryEquipmentType inventoryShelfId inventorySlotId inventorySubslotId inventoryPortId

Column	Syntax	OID
inventoryEquipmentType The equipment type that the inventory data refers to	Enumeration Enumerated Values: 1 shelf 2 slot 3 card 4 port 5 pluggable 6 subslot 7 subcard	.1.3.6.1.4.1.42229.1.2.3.12.1.1.1
inventoryShelfId Identifier of the shelf.	CoriantTypesShelfId Type Constraints: range: 1..65535	.1.3.6.1.4.1.42229.1.2.3.12.1.1.2
inventorySlotId Identifier of the slot.	CoriantTypesSlotId	.1.3.6.1.4.1.42229.1.2.3.12.1.1.3
inventorySubslotId Identifier of the subslot.	CoriantTypesSlotId	.1.3.6.1.4.1.42229.1.2.3.12.1.1.4
inventoryPortId Identifier of the port.	CoriantTypesPortId	.1.3.6.1.4.1.42229.1.2.3.12.1.1.5
inventoryEquipmentVersion The attribute Identifies the Hardware Version of the module that populates the slot.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.42229.1.2.3.12.1.1.6
inventoryModuleType This is the value of module type stored in EEPROM of the equipment.	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.3.12.1.1.7
inventoryVendor Vendor information.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.12.1.1.8
inventorySerialNumber This is the value of serial number stored in EEPROM of the equipment.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.42229.1.2.3.12.1.1.9
inventoryFwVersion Current Firmware (FW) version on the equipment.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.42229.1.2.3.12.1.1.10
inventoryPartNumber Identifies the Part Number of the equipment.	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.3.12.1.1.11
inventoryClei Identifies the CLEI code number of the equipment. The CLEI code is a 10-character code that identifies communications equipment. It describes product type, features, source document, and associated drawings and vintages…	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.3.12.1.1.12
inventoryInterfaceType Indicating interface type of the pluggable. default value :	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.12.1.1.13
inventoryManufactureDate The equipment manufacture date get from equipment. format is mm/dd/yyyy. When there is no date information show nothing Conditions:(../equipment-type = 'shelf') or (../equipment-type = 'card') or (../equipment-type = …	OctetString	.1.3.6.1.4.1.42229.1.2.3.12.1.1.14
inventoryManufacturerNumber This is the value of manufacturer number stored in EEPROM of the equipment.	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.3.12.1.1.16

ledTable

table

.1.3.6.1.4.1.42229.1.2.3.14.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ledTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ledTable'

Copy

Attributes related with LED
Applicable to Shelf, FAN, PSU, CHM1, CHM2, CHM1G, OCC2 in DCI.

ledEntry row .1.3.6.1.4.1.42229.1.2.3.14.1.1

Entry of ledTable

Indexes

ledEquipmentType ledShelfId ledSlotId ledSubslotId ledName

Column	Syntax	OID
ledEquipmentType The attribute indicates the equipment type to identify the module. for example, if the card is CHM1, 'CHM1' shall be used. DCI supporting LEDs: CHM1, CHM2, SHELF, FAN	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.42229.1.2.3.14.1.1.1
ledShelfId Identifier of the shelf.	CoriantTypesShelfId Type Constraints: range: 1..65535	.1.3.6.1.4.1.42229.1.2.3.14.1.1.2
ledSlotId Identifier of the slot.	CoriantTypesSlotId	.1.3.6.1.4.1.42229.1.2.3.14.1.1.3
ledName The functional name of LED. DCI NE: location_led port(n)_led (CHM1: n = 1 to 6, CHM2 n = 1 to 12, e.g. Port12) active_led power_led fault_led status_led subslot(n)_led	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.42229.1.2.3.14.1.1.4
ledStatus Current LED status. DCI NE: For Location_LED: OFF, BLINK For others: red, red-blink,green,green-blink,amber,amber-blink,off,notAvailable	Enumeration Enumerated Values: 1 notAvailable 2 off 3 blink 4 red 5 redBlink 6 green 7 greenBlink 8 amber 9 amberBlink	.1.3.6.1.4.1.42229.1.2.3.14.1.1.5
ledSubslotId Identifier of the subslot.	CoriantTypesSubslotId	.1.3.6.1.4.1.42229.1.2.3.14.1.1.6

temperatureDetailsTable

table

.1.3.6.1.4.1.42229.1.2.3.15.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk temperatureDetailsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::temperatureDetailsTable'

Copy

The detailed information of temperature in each monitoring-point of current module

temperatureDetailsEntry row .1.3.6.1.4.1.42229.1.2.3.15.1.1

Entry of temperatureDetailsTable

Indexes

shelfId slotId temperatureDetailsMonitoringPoint

Column	Syntax	OID
temperatureDetailsMonitoringPoint The point of temperature monitoring. It could be the sensor or chip internal.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.3.15.1.1.1
temperatureDetailsTemperature Temperature at the monitoring point.	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.15.1.1.2
temperatureDetailsTemperatureRangeLow The lowest temperature threshold of this monitoring point in working mode.	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.15.1.1.3
temperatureDetailsTemperatureRangeHigh The highest temperature threshold of this monitoring point in working mode.	CoriantTypesTemperature	.1.3.6.1.4.1.42229.1.2.3.15.1.1.4

otdrTable

table

.1.3.6.1.4.1.42229.1.2.3.16.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otdrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otdrTable'

Copy

Container of OTDR.

otdrEntry row .1.3.6.1.4.1.42229.1.2.3.16.1.1

Entry of otdrTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
otdrState Indicating the current status of the OTDR. default value :not-available	Enumeration Enumerated Values: 0 notAvailable 1 idle 2 measuring 3 finished 4 fail	.1.3.6.1.4.1.42229.1.2.3.16.1.1.1
otdrMeasurementTime Indicating the time remaining in current measurement running. UNITS:second default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.16.1.1.2
otdrError Error message produced when the measurement ends with error.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.42229.1.2.3.16.1.1.3
otdrLaserStatus Indicating the current status of the OTDR laser. default value :not-available	Enumeration Enumerated Values: 0 notAvailable 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.3.16.1.1.4
otdrMeasurementPort 0 indicates that the card is not measuring any port; non-zero indicates the OTDR port number where a measurement is currently taking place. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.16.1.1.5

otdrPortTable

table

.1.3.6.1.4.1.42229.1.2.3.18.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otdrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otdrPortTable'

Copy

Containing attributes of OTDR port.

otdrPortEntry row .1.3.6.1.4.1.42229.1.2.3.18.1.1

Entry of otdrPortTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otdrPortOtdrRange OTDR measurement range. UNITS:km default value :auto	OtdrOtdrRange	.1.3.6.1.4.1.42229.1.2.3.18.1.1.1
otdrPortOtdrPulseWidth Indicates pulse width to be used in otdr measurement. UNITS:nano-second default value :auto	OtdrOtdrPulseWidth	.1.3.6.1.4.1.42229.1.2.3.18.1.1.2
otdrPortOtdrMeasurementSpeed Indicating OTDR measurement speed. default value :auto	Enumeration Enumerated Values: 1 fast 3 medium 4 slow 5 precision 6 auto 7 highPrecision	.1.3.6.1.4.1.42229.1.2.3.18.1.1.3
otdrPortOtdrIor Specifies the group index of refraction (IOR) of the fiber to be measured. default value :auto	OtdrOtdrIor	.1.3.6.1.4.1.42229.1.2.3.18.1.1.4
otdrPortOtdrFiberType Indicating fiber type to be measured. default value :auto	Enumeration Enumerated Values: 0 unknown 1 ssmf 2 leaf 3 twrs 4 twc 5 allwave 6 dsf 7 ls 8 puresilica 9 twreach 10 vistacor 11 teralight 12 drakall 13 twplus 14 twminus 15 pslc 16 auto	.1.3.6.1.4.1.42229.1.2.3.18.1.1.5
otdrPortOtdrLastMeasurement Indicates the last otdr measurement date and time on the port. default value :0000-01-01T00:00:00.00Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.3.18.1.1.6
otdrPortOtdrResolution Specifies the OTDR data sampling resolution. UNITS:meter default value :auto	OctetString	.1.3.6.1.4.1.42229.1.2.3.18.1.1.7
otdrPortLaunchingFiberLength The launching fiber length information for SOR to filter the launching fiber path data UNITS:km default value :0	OctetString	.1.3.6.1.4.1.42229.1.2.3.18.1.1.8

opsTable

table

.1.3.6.1.4.1.42229.1.2.3.20.1 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk opsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::opsTable'

Copy

The list of optical protection switch (ops) on an equipment.

opsEntry row .1.3.6.1.4.1.42229.1.2.3.20.1.1

Entry of opsTable

Indexes

shelfId slotId subslotId opsName

Column	Syntax	OID
opsName The name assigned to identify a specific ops in the device	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.3.20.1.1.1
opsWorkingEntity Identifier of the working port of the OPS.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.3.20.1.1.2
opsProtectionEntity Identifier of the protection port of the OPS	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.3.20.1.1.3
opsAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.3.20.1.1.4
opsOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.3.20.1.1.5
opsAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.3.20.1.1.6
opsAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.3.20.1.1.7
opsProtectionStatus Indicates the status of the protection switch.	Enumeration Enumerated Values: 0 notApplicable 1 manualSwitchToProtection 2 manualSwitchToWorking 3 forceSwitchToProtection 4 forceSwitchToWorking 5 lockoutOfProtection 6 signalFailureOnWorking 7 signalFailureOnProtection 8 signalDegradeOnWorking 9 signalDegradeOnProtection 10 doNotRevert 11 noRequest 12 waitToRestore	.1.3.6.1.4.1.42229.1.2.3.20.1.1.8
opsActivePath Indicating the active port of the protection switch. default value :unknown	Enumeration Enumerated Values: 1 working 2 protection 3 unknown	.1.3.6.1.4.1.42229.1.2.3.20.1.1.9
opsRevertive Revertive behavior of the aps. If True, then automatically revert after protection switch once the fault is restored. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.3.20.1.1.10
opsWaitToRestore Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately, after expiration of the timer, the working is restored and a norequest state is transmitted. UNITS:second de…	Unsigned32 Constraints: range: 0-3600	.1.3.6.1.4.1.42229.1.2.3.20.1.1.11
opsWorkingSwitchThreshold The switching threshold of the working port which indicates the optical power threshold of signal degrade. default value :-18.0	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.20.1.1.12
opsProtectionSwitchThreshold The switching threshold of the protection port which indicates the optical power threshold of signal degrade. default value :-18.0	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.20.1.1.13
opsWorkingLosThreshold The switching threshold of the working port, power level below it will lead to loss of signal. default value :-23.0	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.20.1.1.14
opsProtectionLosThreshold The switching threshold of the protection port, power level below it will lead to loss of signal. default value :-23.0	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.20.1.1.15
opsHoldoffTimer The hold off time of the protection switch. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-1000	.1.3.6.1.4.1.42229.1.2.3.20.1.1.16
opsWavelengthBand Specifies the band of the signal going through the optical protection switch unit. UNITS:nm default value :1550	Enumeration Enumerated Values: 1 t1550 2 t1310	.1.3.6.1.4.1.42229.1.2.3.20.1.1.17
opsFrequency The frequency of optical protection frequency, which will decide the pilot tone modulated on the channel. UNITS:MHz default value :0	CoriantTypesFreq Type Constraints: range: 0 range: 191250000..196111250	.1.3.6.1.4.1.42229.1.2.3.20.1.1.18
opsWorkingProtectionRelativeThreshold Specify the threshold of power difference between working path and protection path; Setting to value 0 to disable the power difference as switch criteria; Setting to non-zero value indicates the value of power differen…	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.20.1.1.19
opsRelativeThresholdHysteresis Specify relative threshold hysteresis for clearance of relative threshold crossing failure. default value :2.0	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.20.1.1.20
opsRelativeThresholdOffset Specify relative threshold offset for protection switch per power difference between working and protection, the offset is the value of (working power - protection power), the offset value will be excluded from power …	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.20.1.1.21

subportStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.3.25.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk subportStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::subportStatisticsTable'

Copy

NULL

subportStatisticsEntry row .1.3.6.1.4.1.42229.1.2.3.25.1.1

Entry of subportStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
subportStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.3.25.1.1.1

portStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.3.26.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk portStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::portStatisticsTable'

Copy

NULL

portStatisticsEntry row .1.3.6.1.4.1.42229.1.2.3.26.1.1

Entry of portStatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
portStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.3.26.1.1.1

subcardStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.3.27.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk subcardStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::subcardStatisticsTable'

Copy

NULL

subcardStatisticsEntry row .1.3.6.1.4.1.42229.1.2.3.27.1.1

Entry of subcardStatisticsTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
subcardStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.3.27.1.1.1

cardStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.3.28.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk cardStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::cardStatisticsTable'

Copy

NULL

cardStatisticsEntry row .1.3.6.1.4.1.42229.1.2.3.28.1.1

Entry of cardStatisticsTable

Indexes

shelfId slotId

Column	Syntax	OID
cardStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.3.28.1.1.1

shelfStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.3.29.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk shelfStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::shelfStatisticsTable'

Copy

NULL

shelfStatisticsEntry row .1.3.6.1.4.1.42229.1.2.3.29.1.1

Entry of shelfStatisticsTable

Indexes

shelfId

Column	Syntax	OID
shelfStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.3.29.1.1.1

ocmPortTable

table

.1.3.6.1.4.1.42229.1.2.3.30.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ocmPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ocmPortTable'

Copy

Containing attributes of OCM port.

ocmPortEntry row .1.3.6.1.4.1.42229.1.2.3.30.1.1

Entry of ocmPortTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
ocmPortEnable Enable or disable the function of ocm port measurement. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.3.30.1.1.1
ocmPortGridMode Indicates Grid type of the OMS. default value :fixed_50G_96ch	CoriantTypesGridType Type Values: 0 notApplicable 1 fixed50g96ch 2 fixed100g48ch 3 fixed75g64ch 4 flexible	.1.3.6.1.4.1.42229.1.2.3.30.1.1.2
ocmPortOpticalPowerOffset The offset to calibrate Optical power of monitored channels, resulted value = monitored value + offset.	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.3.30.1.1.4
ocmPortChannelBaudRate The baud rate selection for monitored optical channel default value :user-defined	Enumeration Enumerated Values: 1 low 2 high 3 userDefined	.1.3.6.1.4.1.42229.1.2.3.30.1.1.5
ocmPortPpa1dBBW The channel baud rate with 1dB bandwidth working for user-defined channel-baud-rate UNITS:GHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.30.1.1.6

monitoredChannelsTable

table

.1.3.6.1.4.1.42229.1.2.3.31.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk monitoredChannelsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::monitoredChannelsTable'

Copy

List of monitored channels

monitoredChannelsEntry row .1.3.6.1.4.1.42229.1.2.3.31.1.1

Entry of monitoredChannelsTable

Indexes

shelfId slotId subslotId portId monitoredChannelsFrequencyIndex

Column	Syntax	OID
monitoredChannelsFrequencyIndex Nominal center frequency as index with unit of MHz.	CoriantTypesFreq Type Constraints: range: 0 range: 191250000..196111250	.1.3.6.1.4.1.42229.1.2.3.31.1.1.1
monitoredChannelsMonitoredCenterFrequency Monitored channel center frequency.	CoriantTypesFreq Type Constraints: range: 0 range: 191250000..196111250	.1.3.6.1.4.1.42229.1.2.3.31.1.1.2
monitoredChannelsMonitoredOpticalPower Monitored channel optical power.	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.31.1.1.3
monitoredChannelsMonitoredWidth Monitored frequency width with unit MHz. default value :not-available	CoriantTypesFreqRoadm	.1.3.6.1.4.1.42229.1.2.3.31.1.1.4

qsfpSignalIntegrityTable

table

.1.3.6.1.4.1.42229.1.2.3.32.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk qsfpSignalIntegrityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::qsfpSignalIntegrityTable'

Copy

Container for QSFP or QSFPxx signal integrity parameters defined in SFF-8636 .

qsfpSignalIntegrityEntry row .1.3.6.1.4.1.42229.1.2.3.32.1.1

Entry of qsfpSignalIntegrityTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
qsfpSignalIntegrityTxInputEqFixedManualControlImpl Indicates implementation status of Tx side input fixed manual equalization control.	QsfpSignalIntegritySignalVal Type Values: 0 nA 1 true 2 false	.1.3.6.1.4.1.42229.1.2.3.32.1.1.1
qsfpSignalIntegrityRxOutputEqPrecursorControlImpl Indicates implementation status of Rx side output pre-cursor equalization control.	QsfpSignalIntegritySignalVal Type Values: 0 nA 1 true 2 false	.1.3.6.1.4.1.42229.1.2.3.32.1.1.2
qsfpSignalIntegrityRxOutputEqPostcursorControlImpl Indicates implementation status of Rx side output post-cursor equalization control.	QsfpSignalIntegritySignalVal Type Values: 0 nA 1 true 2 false	.1.3.6.1.4.1.42229.1.2.3.32.1.1.3
qsfpSignalIntegrityRxOutputAmplitudeControlImpl Indicates implementation status of Rx side output amplitude control.	QsfpSignalIntegritySignalVal Type Values: 0 nA 1 true 2 false	.1.3.6.1.4.1.42229.1.2.3.32.1.1.4

qsfpSignalIntegrityLaneTable

table

.1.3.6.1.4.1.42229.1.2.3.33.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk qsfpSignalIntegrityLaneTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::qsfpSignalIntegrityLaneTable'

Copy

List of qspf lane signal integrity.

qsfpSignalIntegrityLaneEntry row .1.3.6.1.4.1.42229.1.2.3.33.1.1

Entry of qsfpSignalIntegrityLaneTable

Indexes

shelfId slotId subslotId portId qsfpSignalIntegrityLaneLaneId

Column	Syntax	OID
qsfpSignalIntegrityLaneLaneId Id of pluggable lane.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.33.1.1.1
qsfpSignalIntegrityLaneTxInputEqFixedManualControl Fixed manual equalization value of Tx side input for the lane. UNITS:dB default value :n/a	QsfpSignalIntegrityControlVal	.1.3.6.1.4.1.42229.1.2.3.33.1.1.2
qsfpSignalIntegrityLaneTxInputEqAdaptiveControl Adaptive equalization control of Tx side input for Tx 1-4.	QsfpSignalIntegritySignalVal Type Values: 0 nA 1 true 2 false	.1.3.6.1.4.1.42229.1.2.3.33.1.1.3
qsfpSignalIntegrityLaneRxOutputEqPrecursorControl Rx side output pre-cursor equalization values for Rx 1-4. UNITS:dB default value :n/a	QsfpSignalIntegrityControlVal	.1.3.6.1.4.1.42229.1.2.3.33.1.1.4
qsfpSignalIntegrityLaneRxOutputEqPostcursorControl Rx side output post-cursor equalization values for Rx 1-4. UNITS:dB default value :n/a	QsfpSignalIntegrityControlVal	.1.3.6.1.4.1.42229.1.2.3.33.1.1.5
qsfpSignalIntegrityLaneRxOutputAmplitudeControl Rx side output amplitude values for Rx 1-4. default value :n/a	Enumeration Enumerated Values: 0 nA 1 t100400mv 2 t300600mv 3 t400800mv 4 t6001200mv 5 notDefined	.1.3.6.1.4.1.42229.1.2.3.33.1.1.6

opticalPowerLaneTable

table

.1.3.6.1.4.1.42229.1.2.3.34.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk opticalPowerLaneTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::opticalPowerLaneTable'

Copy

NULL

opticalPowerLaneEntry row .1.3.6.1.4.1.42229.1.2.3.34.1.1

Entry of opticalPowerLaneTable

Indexes

shelfId slotId subslotId portId opticalPowerLaneLaneId

Column	Syntax	OID
opticalPowerLaneLaneId The physical lane index for optical pluggable	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.34.1.1.1
opticalPowerLaneRxOpticalPower Received optical power	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.34.1.1.2
opticalPowerLaneTxOpticalPower Transmitted optical power	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.3.34.1.1.3

cpuStateTable

table

.1.3.6.1.4.1.42229.1.2.3.35.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk cpuStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::cpuStateTable'

Copy

The module with CPU's utilization states

cpuStateEntry row .1.3.6.1.4.1.42229.1.2.3.35.1.1

Entry of cpuStateTable

Indexes

shelfId slotId

Column	Syntax	OID
cpuStateCpuTotalUtilization The total CPUs' utilization	CoriantTypesPercentagePrecision2	.1.3.6.1.4.1.42229.1.2.3.35.1.1.1

perCoreUtilizationTable

table

.1.3.6.1.4.1.42229.1.2.3.36.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk perCoreUtilizationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::perCoreUtilizationTable'

Copy

Each CPU core's utilization

perCoreUtilizationEntry row .1.3.6.1.4.1.42229.1.2.3.36.1.1

Entry of perCoreUtilizationTable

Indexes

shelfId slotId perCoreUtilizationCoreIndex

Column	Syntax	OID
perCoreUtilizationCoreIndex The index of the CPU core	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.36.1.1.1
perCoreUtilizationUtilization The utilization of current CPU core	CoriantTypesPercentagePrecision2	.1.3.6.1.4.1.42229.1.2.3.36.1.1.2

memoryStateTable

table

.1.3.6.1.4.1.42229.1.2.3.37.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk memoryStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::memoryStateTable'

Copy

For module that have associated memory, these values
report information about available and utilized memory

memoryStateEntry row .1.3.6.1.4.1.42229.1.2.3.37.1.1

Entry of memoryStateTable

Indexes

shelfId slotId

Column	Syntax	OID
memoryStateAvailable The available memory physically installed, or logically allocated to the module. UNITS:bytes	OctetString	.1.3.6.1.4.1.42229.1.2.3.37.1.1.1
memoryStateUtilized The memory currently in use by processes running on the module, not considering reserved memory that is not available for use. UNITS:bytes	OctetString	.1.3.6.1.4.1.42229.1.2.3.37.1.1.2

channelStatesTable

table

.1.3.6.1.4.1.42229.1.2.3.38.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk channelStatesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::channelStatesTable'

Copy

NULL

channelStatesEntry row .1.3.6.1.4.1.42229.1.2.3.38.1.1

Entry of channelStatesTable

Indexes

shelfId slotId subslotId portId channelStatesChannelId

Column	Syntax	OID
channelStatesChannelId multi channel pluggable's channel id	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.38.1.1.1
channelStatesLaserBiasCurrent The current applied by the system to the transmit laser to achieve the output power. The current is expressed in mA with up to two decimal precision. Just supply the instant value UNITS:mA	OctetString	.1.3.6.1.4.1.42229.1.2.3.38.1.1.2

diagnosticAlarmThresholdsTable

table

.1.3.6.1.4.1.42229.1.2.3.39.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk diagnosticAlarmThresholdsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::diagnosticAlarmThresholdsTable'

Copy

NULL

diagnosticAlarmThresholdsEntry row .1.3.6.1.4.1.42229.1.2.3.39.1.1

Entry of diagnosticAlarmThresholdsTable

Indexes

shelfId slotId subslotId portId diagnosticAlarmThresholdsDiagnosticParameter

Column	Syntax	OID
diagnosticAlarmThresholdsDiagnosticParameter The diagnostic parameter for pluggable which support alarm by threshold	Enumeration Enumerated Values: 1 temperature 2 voltage 3 laserBias 4 laneRxPower 5 laneTxPower	.1.3.6.1.4.1.42229.1.2.3.39.1.1.1
diagnosticAlarmThresholdsParameterUnits NULL	Enumeration Enumerated Values: 1 celsius 2 v 3 ma 4 dbm	.1.3.6.1.4.1.42229.1.2.3.39.1.1.2
diagnosticAlarmThresholdsHighThreshold The high alarm threshold of this parameter	OctetString	.1.3.6.1.4.1.42229.1.2.3.39.1.1.3
diagnosticAlarmThresholdsLowThreshold The low alarm threshold of this parameter	OctetString	.1.3.6.1.4.1.42229.1.2.3.39.1.1.4

supportedGainRangeTable

table

.1.3.6.1.4.1.42229.1.2.3.40.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk supportedGainRangeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::supportedGainRangeTable'

Copy

NULL

supportedGainRangeEntry row .1.3.6.1.4.1.42229.1.2.3.40.1.1

Entry of supportedGainRangeTable

Indexes

shelfId slotId subslotId amplifierName supportedGainRangeRangeType

Column	Syntax	OID
supportedGainRangeRangeType The type of gain range for manually setting	AmplifierGainRangeType Type Values: 1 standard 2 low 3 high 4 notAvailable	.1.3.6.1.4.1.42229.1.2.3.40.1.1.1
supportedGainRangeGainRangeMin The minimum of settable gain for this range type	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.3.40.1.1.2
supportedGainRangeGainRangeMax The maxmum of settable gain for this range type	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.3.40.1.1.3

channelDataListTable

table

.1.3.6.1.4.1.42229.1.2.3.41.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk channelDataListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::channelDataListTable'

Copy

Per channel data for PCL restore.

channelDataListEntry row .1.3.6.1.4.1.42229.1.2.3.41.1.1

Entry of channelDataListTable

Indexes

shelfId slotId subslotId amplifierName channelDataListIndexId

Column	Syntax	OID
channelDataListIndexId Integer ID of the channel-data.	Unsigned32 Constraints: range: 0-135	.1.3.6.1.4.1.42229.1.2.3.41.1.1.1
channelDataListChannleId channle id. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.41.1.1.2
channelDataListChannlePower channle power. default value :0	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.3.41.1.1.3

tlmStatisticsdataTable

table

.1.3.6.1.4.1.42229.1.2.3.43.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk tlmStatisticsdataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::tlmStatisticsdataTable'

Copy

NULL

tlmStatisticsdataEntry row .1.3.6.1.4.1.42229.1.2.3.43.1.1

Entry of tlmStatisticsdataTable

Indexes

shelfId

Column	Syntax	OID
tlmStatisticsdataRefreshCounter count refreshed times. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.43.1.1.1
tlmStatisticsdataValidNum Number of valid data list. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.43.1.1.2

tlmStatisticsdataListTable

table

.1.3.6.1.4.1.42229.1.2.3.44.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk tlmStatisticsdataListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::tlmStatisticsdataListTable'

Copy

NULL

tlmStatisticsdataListEntry row .1.3.6.1.4.1.42229.1.2.3.44.1.1

Entry of tlmStatisticsdataListTable

Indexes

shelfId

Column	Syntax	OID
tlmStatisticsdataListValidNum Number of valid data list. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.3.44.1.1.1

eth10gTable

table

.1.3.6.1.4.1.42229.1.2.4.1.1.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth10gTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth10gTable'

Copy

Represents the 10GBE object.

eth10gEntry row .1.3.6.1.4.1.42229.1.2.4.1.1.1.1

Entry of eth10gTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth10gEthFecType The FEC working type of etyn port. default value :auto	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.1
eth10gEthFecTypeState The FEC working state of etyn port. default value :disabled	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.2
eth10gTransmitInterpacketgap Specifies the minimum transmit IPG value. default value :8	Unsigned32 Constraints: range: 8-12	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.3
eth10gGfpPayloadFcs Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value …	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.4
eth10gMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.5
eth10gAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.6
eth10gOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.7
eth10gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.8
eth10gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.9
eth10gClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.10
eth10gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.11
eth10gNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.12
eth10gAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.13
eth10gLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.14
eth10gLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.15
eth10gTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.16
eth10gTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.17
eth10gServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.18
eth10gLldpStatusIf Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and recei…	Enumeration Enumerated Values: 0 notApplicable 2 rxonly 3 txandrx 4 disabled	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.19
eth10gUpiValue The value of ODU2 upi in PREAMBLE mapping mode. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 g709 2 gsupp43	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.20
eth10gHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.21
eth10gManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.22

testSignalFacilityStatusTable

table

.1.3.6.1.4.1.42229.1.2.4.1.2.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk testSignalFacilityStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::testSignalFacilityStatusTable'

Copy

Test signal status for current facility.

testSignalFacilityStatusEntry row .1.3.6.1.4.1.42229.1.2.4.1.2.1.1

Entry of testSignalFacilityStatusTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
testSignalFacilityStatusPrbsSync The test result of PRBS Synchronization default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 inSync 2 outSync 3 errSync	.1.3.6.1.4.1.42229.1.2.4.1.2.1.1.1
testSignalFacilityStatusTestTimeDuration The time duration of signal test UNITS:seconds	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.2.1.1.2
testSignalFacilityStatusPrbsBitErrorCount The counting of bit error by PRBS Synchronization	IetfYangTypesGauge64	.1.3.6.1.4.1.42229.1.2.4.1.2.1.1.3

lldpRemoteSystemTable

table

.1.3.6.1.4.1.42229.1.2.4.1.3.1 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk lldpRemoteSystemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::lldpRemoteSystemTable'

Copy

List of LLDP neighbors.

lldpRemoteSystemEntry row .1.3.6.1.4.1.42229.1.2.4.1.3.1.1

Entry of lldpRemoteSystemTable

Indexes

shelfId slotId subslotId portId subportId lldpRemoteSystemLldpRemoteIndex

Column	Syntax	OID
lldpRemoteSystemLldpRemoteIndex This attribute represents an arbitrary local integer value used by this agent to identify a particular connection instance, unique only for the indicated remote system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.1
lldpRemoteSystemRemoteChassisIdSubtype This attribute describes the source of a chassis identifier. The enumeration 'chassisComponent(1)' represents a chassis identifier based on the value of entPhysicalAlias object (defined in IETF RFC 2737)…	Enumeration Enumerated Values: 1 chassiscomponent 2 interfacealias 3 portcomponent 4 macaddress 5 networkaddress 6 interfacename 7 local	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.2
lldpRemoteSystemRemoteChassisId This attribute describes the format of a chassis identifier string. Objects of this type are always used with an associated LldpChassisIdSubtype object, which identifies the format of the particular LldpChassisId objec…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.3
lldpRemoteSystemRemotePortIdSubtype This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instanc…	Enumeration Enumerated Values: 1 interfacealias 2 portcomponent 3 macaddress 4 networkaddress 5 interfacename 6 agentcircuitid 7 local	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.4
lldpRemoteSystemRemotePortId This attribute describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instanc…	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.5
lldpRemoteSystemRemotePortDesc The string value used to identify the description of the given port associated with the remote system.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.6
lldpRemoteSystemRemoteSysName The string value used to identify the system name of the remote system. sys-name: system name	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.7
lldpRemoteSystemRemoteSysDesc The string value used to identify the system description of the remote system. sys-desc: system description	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.8
lldpRemoteSystemRemoteSysCapSupported This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. Th…	LldpLldpSysCap Type Values: 0 other 1 repeater 2 bridge 3 wlanaccesspoint 4 router 5 telephone 6 docsiscabledevice 7 stationonly 8 cvlancomponent 9 svlancomponent 10 twoportmacrelay	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.9
lldpRemoteSystemRemoteSysCapEnabled This attribute describes the system capabilities. The bit 'other(0)' indicates that the system has capabilities other than those listed below. The bit 'repeater(1)' indicates that the system has repeater capability. Th…	LldpLldpSysCap Type Values: 0 other 1 repeater 2 bridge 3 wlanaccesspoint 4 router 5 telephone 6 docsiscabledevice 7 stationonly 8 cvlancomponent 9 svlancomponent 10 twoportmacrelay	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.10
lldpRemoteSystemManagementAddress The last reported remote management address	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.11
lldpRemoteSystemManagementAddressType The last reported remote management address type	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.3.1.1.12

remoteManAddressesTable

table

.1.3.6.1.4.1.42229.1.2.4.1.4.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk remoteManAddressesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::remoteManAddressesTable'

Copy

List of management addresses of LLDP neighbor. 
man:managment, remote management addresses

remoteManAddressesEntry row .1.3.6.1.4.1.42229.1.2.4.1.4.1.1

Entry of remoteManAddressesTable

Indexes

shelfId slotId subslotId portId subportId lldpRemoteSystemLldpRemoteIndex remoteManAddressesRemoteManAddrSubtype remoteManAddressesRemoteManAddr

Column	Syntax	OID
remoteManAddressesRemoteManAddrSubtype The type of management address identifier encoding used in the associated 'lldpLocManagmentAddr' object.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.4.1.1.1
remoteManAddressesRemoteManAddr The string value used to identify the management address component associated with the remote system. The purpose of this address is to contact the management entity. man: management addr: address	OctetString Constraints: range: 0-62	.1.3.6.1.4.1.42229.1.2.4.1.4.1.1.2
remoteManAddressesRemoteManAddrIfSubtype This attribute describes the basis of a particular type of interface associated with the management address. The enumeration 'unknown(1)' represents the case where the interface is not known. …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.4.1.1.3
remoteManAddressesRemoteManAddrIfId The integer value used to identify the interface number regarding the management address component associated with the remote system. man: management addr: address	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.4.1.1.4
remoteManAddressesRemoteManAddrOid The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent. man: management addr: address oid: object identifier	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.4.1.1.5

oduTable

table

.1.3.6.1.4.1.42229.1.2.4.1.5.1 · 1 row entry · 39 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oduTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oduTable'

Copy

NULL

oduEntry row .1.3.6.1.4.1.42229.1.2.4.1.5.1.1

Entry of oduTable

Indexes

shelfId slotId subslotId portId subportId odutypeL1 oduidL1 odutypeL2 oduidL2 odutypeL3 oduidL3 odutypeL4 oduidL4

Column	Syntax	OID
odutypeL1 Level 1 ODU type	CoriantTypesOduType Type Values: 0 unused 1 odu0 2 odu1 3 odu2 4 odu2e 5 odu3 6 odu3e 7 odu4 8 oduflex 9 oduc2 10 oduc3 11 oduc4 12 oduc5 13 oduc6 14 oduc7 16 oduc9 18 oduc11	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.1
oduidL1 Identifier of level 1 ODU	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.2
odutypeL2 Level 2 ODU type	CoriantTypesOduType Type Values: 0 unused 1 odu0 2 odu1 3 odu2 4 odu2e 5 odu3 6 odu3e 7 odu4 8 oduflex 9 oduc2 10 oduc3 11 oduc4 12 oduc5 13 oduc6 14 oduc7 16 oduc9 18 oduc11	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.3
oduidL2 Identifier of level 2 ODU	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.4
odutypeL3 Level 3 ODU type	CoriantTypesOduType Type Values: 0 unused 1 odu0 2 odu1 3 odu2 4 odu2e 5 odu3 6 odu3e 7 odu4 8 oduflex 9 oduc2 10 oduc3 11 oduc4 12 oduc5 13 oduc6 14 oduc7 16 oduc9 18 oduc11	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.5
oduidL3 Identifier of level 3 ODU	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.6
odutypeL4 Level 4 ODU type	CoriantTypesOduType Type Values: 0 unused 1 odu0 2 odu1 3 odu2 4 odu2e 5 odu3 6 odu3e 7 odu4 8 oduflex 9 oduc2 10 oduc3 11 oduc4 12 oduc5 13 oduc6 14 oduc7 16 oduc9 18 oduc11	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.7
oduidL4 Identifier of level 4 ODU	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.8
oduAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.9
oduOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.10
oduAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.11
oduAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.12
oduServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.13
oduTribSlot Tributary slots of ODU, range 1 to 80	CoriantTypesNumberList Type Constraints: range: 0..255	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.14
oduRxPayloadType Received payload-type of ODU	OctetString Constraints: range: 0-0 range: 4-4	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.15
oduTxPayloadType Transmitter payload-type of ODU	OctetString Constraints: range: 0-0 range: 4-4	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.16
oduNimEnable The enable switching of nim function default value :enabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.17
oduDelayMeasurementEnable The enable switching of delay-measurement function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.18
oduOpuConfigActual The actual opu configuration type default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 intact 2 client 3 mux	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.19
oduClientSignalType The ODUflex rate for special signal type default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 fc8g 2 fc16g	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.20
oduExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.21
oduExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.22
oduExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.23
oduTxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.24
oduTxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.25
oduTxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.26
oduTimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.27
oduTimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.28
oduRxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.29
oduRxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.30
oduRxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.31
oduDegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.32
oduDegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.33
oduTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.34
oduTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.35
oduTerminationMode Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminated	Enumeration Enumerated Values: 0 terminated 1 nonTerminated	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.36
oduType Describes the type of odu	CoriantTypesOduType Type Values: 0 unused 1 odu0 2 odu1 3 odu2 4 odu2e 5 odu3 6 odu3e 7 odu4 8 oduflex 9 oduc2 10 oduc3 11 oduc4 12 oduc5 13 oduc6 14 oduc7 16 oduc9 18 oduc11	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.37
oduManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.38
oduMsimConfig Specifies msim alarm reporting or not when msi value received not followed G.709 definition Conditions:../odu-type = 'ODU4' default value :enabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.40

oduEncryptionTable

table

.1.3.6.1.4.1.42229.1.2.4.1.6.1 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oduEncryptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oduEncryptionTable'

Copy

Encryption function for the ODU channel.

oduEncryptionEntry row .1.3.6.1.4.1.42229.1.2.4.1.6.1.1

Entry of oduEncryptionTable

Indexes

shelfId slotId subslotId portId subportId odutypeL1 oduidL1 odutypeL2 oduidL2 odutypeL3 oduidL3 odutypeL4 oduidL4

Column	Syntax	OID
oduEncryptionEncryptionEnable Setting AES-256 encryption on OTN default value :disabled	Enumeration Enumerated Values: 1 enabled 2 disabled 3 enabledNonRevertive	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.1
oduEncryptionBlockCipherMode Specifies the block cipher mode of operation.	Enumeration Enumerated Values: 1 ctr 2 gcm	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.2
oduEncryptionEncryptionInterval The encryption key rotation interval (in minutes) UNITS:minutes default value :30	Unsigned32 Constraints: range: 10-1440	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.3
oduEncryptionEncryptionTxStatus The encryption status at transmit side of the ODU, which reflects the status of both encryption data and communication sessions.	CoriantCommonOtnEncryStatusEnum Type Values: 0 notAvailable 1 handshake 2 keyInitializing 3 keyInSync 4 unreachable 5 mismatch 6 connectFailed 7 disabled 8 encryptFail 9 encryptNormal 10 authenticationFailed 11 trafficSquelched	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.4
oduEncryptionEncryptionRxStatus The encryption status at receive side of the ODU, which reflects the status of both encryption data and communication sessions.	CoriantCommonOtnEncryStatusEnum Type Values: 0 notAvailable 1 handshake 2 keyInitializing 3 keyInSync 4 unreachable 5 mismatch 6 connectFailed 7 disabled 8 encryptFail 9 encryptNormal 10 authenticationFailed 11 trafficSquelched	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.5
oduEncryptionOduKeySyncSession Indicate the associated session for the ODU channel to synchronize keys. default value :none	CoriantCommonOtnKeySyncSession	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.6
oduEncryptionEncryptionTxChannelId Specify channel identifier of the encrypted ODU, which shall be unique within the NE.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.7
oduEncryptionTimeToNextKey The time left to rotate the ODU encryption key. UNITS:seconds default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.8
oduEncryptionEncryptionTerminationDirection Indicates the encryption termination direction. default value :physical-port	Enumeration Enumerated Values: 1 physicalPort 2 crossConnection	.1.3.6.1.4.1.42229.1.2.4.1.6.1.1.9

testSignalStatusTable

table

.1.3.6.1.4.1.42229.1.2.4.1.7.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk testSignalStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::testSignalStatusTable'

Copy

Test signal status on ODU

testSignalStatusEntry row .1.3.6.1.4.1.42229.1.2.4.1.7.1.1

Entry of testSignalStatusTable

Indexes

shelfId slotId subslotId portId subportId odutypeL1 oduidL1 odutypeL2 oduidL2 odutypeL3 oduidL3 odutypeL4 oduidL4

Column	Syntax	OID
testSignalStatusPrbsSync The test result of PRBS Synchronization default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 inSync 2 outSync 3 errSync	.1.3.6.1.4.1.42229.1.2.4.1.7.1.1.1
testSignalStatusTestTimeDuration The time duration of signal test UNITS:seconds	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.7.1.1.2
testSignalStatusPrbsBitErrorCount The counting of bit error by PRBS Synchronization	IetfYangTypesGauge64	.1.3.6.1.4.1.42229.1.2.4.1.7.1.1.3

eth40gTable

table

.1.3.6.1.4.1.42229.1.2.4.1.8.1 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth40gTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth40gTable'

Copy

Represents the 40GBE object.

eth40gEntry row .1.3.6.1.4.1.42229.1.2.4.1.8.1.1

Entry of eth40gTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth40gEthFecType The FEC working type of etyn port. default value :auto	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.1
eth40gEthFecTypeState The FEC working state of etyn port. default value :disabled	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.2
eth40gTransmitInterpacketgap Specifies the minimum transmit IPG value. default value :8	Unsigned32 Constraints: range: 8-12	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.3
eth40gGfpPayloadFcs Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value …	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.4
eth40gMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.5
eth40gAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.6
eth40gOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7
eth40gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.8
eth40gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.9
eth40gClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.10
eth40gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.11
eth40gNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.12
eth40gAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.13
eth40gLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.14
eth40gLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.15
eth40gTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.16
eth40gTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.17
eth40gServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.18
eth40gLldpStatusIf Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and recei…	Enumeration Enumerated Values: 0 notApplicable 2 rxonly 3 txandrx 4 disabled	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.19
eth40gHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.20
eth40gManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.21

eth100gTable

table

.1.3.6.1.4.1.42229.1.2.4.1.9.1 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth100gTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth100gTable'

Copy

Represents the 100GBE object.

eth100gEntry row .1.3.6.1.4.1.42229.1.2.4.1.9.1.1

Entry of eth100gTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth100gEthFecType The FEC working type of etyn port. default value :auto	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.1
eth100gEthFecTypeState The FEC working state of etyn port. default value :disabled	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.2
eth100gTransmitInterpacketgap Specifies the minimum transmit IPG value. default value :8	Unsigned32 Constraints: range: 8-12	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.3
eth100gGfpPayloadFcs Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value …	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.4
eth100gMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.5
eth100gAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.6
eth100gOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.7
eth100gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.8
eth100gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.9
eth100gClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.10
eth100gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.11
eth100gNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.12
eth100gAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.13
eth100gLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.14
eth100gLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.15
eth100gTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.16
eth100gTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.17
eth100gServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.18
eth100gLldpStatusIf Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and recei…	Enumeration Enumerated Values: 0 notApplicable 2 rxonly 3 txandrx 4 disabled	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.19
eth100gHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.20
eth100gManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.9.1.1.21

otu4Table

table

.1.3.6.1.4.1.42229.1.2.4.1.10.1 · 1 row entry · 27 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otu4Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otu4Table'

Copy

Represents the otu4 object

otu4Entry row .1.3.6.1.4.1.42229.1.2.4.1.10.1.1

Entry of otu4Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otu4FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.1
otu4AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.2
otu4OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.3
otu4AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.4
otu4AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.5
otu4ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.6
otu4ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.7
otu4ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.8
otu4ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.9
otu4TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.10
otu4TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.11
otu4TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.12
otu4TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.13
otu4TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.14
otu4RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.15
otu4RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.16
otu4RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.17
otu4DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.18
otu4DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :128459	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.19
otu4LoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.20
otu4LoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.21
otu4ClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.22
otu4ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.23
otu4HoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.24
otu4NearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.25
otu4AlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.26
otu4ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.10.1.1.27

otu2Table

table

.1.3.6.1.4.1.42229.1.2.4.1.11.1 · 1 row entry · 27 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otu2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otu2Table'

Copy

Represents the otu2 object

otu2Entry row .1.3.6.1.4.1.42229.1.2.4.1.11.1.1

Entry of otu2Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otu2FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.1
otu2AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.2
otu2OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3
otu2AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.4
otu2AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.5
otu2ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.6
otu2ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.7
otu2ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.8
otu2ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.9
otu2TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.10
otu2TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.11
otu2TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.12
otu2TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.13
otu2TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.14
otu2RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.15
otu2RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.16
otu2RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.17
otu2DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.18
otu2DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :12304	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.19
otu2LoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.20
otu2LoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.21
otu2ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.22
otu2ClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.24
otu2ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.25
otu2HoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.26
otu2NearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.27
otu2AlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.28

otu2eTable

table

.1.3.6.1.4.1.42229.1.2.4.1.12.1 · 1 row entry · 27 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otu2eTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otu2eTable'

Copy

Represents the otu2e object

otu2eEntry row .1.3.6.1.4.1.42229.1.2.4.1.12.1.1

Entry of otu2eTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otu2eFecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.1
otu2eAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.2
otu2eOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.3
otu2eAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.4
otu2eAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.5
otu2eServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.6
otu2eExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.7
otu2eExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.8
otu2eExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.9
otu2eTxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.10
otu2eTxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.11
otu2eTxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.12
otu2eTimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.13
otu2eTimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.14
otu2eRxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.15
otu2eRxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.16
otu2eRxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.17
otu2eDegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.18
otu2eDegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :12748	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.19
otu2eLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.20
otu2eLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.21
otu2eManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.22
otu2eClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.24
otu2eClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.25
otu2eHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.26
otu2eNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.27
otu2eAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.12.1.1.28

fc8gTable

table

.1.3.6.1.4.1.42229.1.2.4.1.13.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk fc8gTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::fc8gTable'

Copy

Represents the FC8G object.

fc8gEntry row .1.3.6.1.4.1.42229.1.2.4.1.13.1.1

Entry of fc8gTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
fc8gMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.1
fc8gAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.2
fc8gOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.3
fc8gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.4
fc8gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.5
fc8gClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.6
fc8gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.7
fc8gNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.8
fc8gAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.9
fc8gLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.10
fc8gLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.11
fc8gTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.12
fc8gTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.13
fc8gServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.14
fc8gHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.15
fc8gManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.13.1.1.16

fc16gTable

table

.1.3.6.1.4.1.42229.1.2.4.1.14.1 · 1 row entry · 16 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk fc16gTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::fc16gTable'

Copy

Represents the FC16G object.

fc16gEntry row .1.3.6.1.4.1.42229.1.2.4.1.14.1.1

Entry of fc16gTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
fc16gMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.1
fc16gAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.2
fc16gOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.3
fc16gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.4
fc16gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.5
fc16gClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.6
fc16gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.7
fc16gNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.8
fc16gAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.9
fc16gLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.10
fc16gLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.11
fc16gTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.12
fc16gTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.13
fc16gServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.14
fc16gHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.15
fc16gManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.14.1.1.16

oc192Table

table

.1.3.6.1.4.1.42229.1.2.4.1.15.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oc192Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oc192Table'

Copy

Represents the OC192 object.

oc192Entry row .1.3.6.1.4.1.42229.1.2.4.1.15.1.1

Entry of oc192Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
oc192MappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.1
oc192AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.2
oc192OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.3
oc192AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.4
oc192AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.5
oc192ClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.6
oc192ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.7
oc192NearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.8
oc192AlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.9
oc192LoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.10
oc192LoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.11
oc192TestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.12
oc192TestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.13
oc192ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.14
oc192ExpTrc The expected trc(trail trace identification)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.15
oc192TxTrc The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.16
oc192RxTrc The received trc(trail trace identification)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.17
oc192TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.18
oc192TimMonitor The enable switching of tim defect monitor mode default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.19
oc192AisType NULL default value :Generic-AIS	Enumeration Enumerated Values: 0 genericAis 1 msAis 2 aisL	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.20
oc192HoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.21
oc192ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.15.1.1.22

stm64Table

table

.1.3.6.1.4.1.42229.1.2.4.1.16.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk stm64Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::stm64Table'

Copy

Represents the STM64 object.

stm64Entry row .1.3.6.1.4.1.42229.1.2.4.1.16.1.1

Entry of stm64Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
stm64MappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.1
stm64AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.2
stm64OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.3
stm64AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.4
stm64AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.5
stm64ClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.6
stm64ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.7
stm64NearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.8
stm64AlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.9
stm64LoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.10
stm64LoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.11
stm64TestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.12
stm64TestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.13
stm64ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.14
stm64ExpTrc The expected trc(trail trace identification)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.15
stm64TxTrc The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.16
stm64RxTrc The received trc(trail trace identification)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.17
stm64TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.18
stm64TimMonitor The enable switching of tim defect monitor mode default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.19
stm64AisType NULL default value :Generic-AIS	Enumeration Enumerated Values: 0 genericAis 1 msAis 2 aisL	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.20
stm64HoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.21
stm64ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.16.1.1.22

otuc2Table

table

.1.3.6.1.4.1.42229.1.2.4.1.17.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc2Table'

Copy

Represents the otuc2 object

otuc2Entry row .1.3.6.1.4.1.42229.1.2.4.1.17.1.1

Entry of otuc2Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otuc2FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.1
otuc2AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.2
otuc2OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.3
otuc2AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.4
otuc2AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.5
otuc2ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.6
otuc2ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.7
otuc2ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.8
otuc2ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.9
otuc2TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.10
otuc2TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.11
otuc2TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.12
otuc2TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.13
otuc2TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.14
otuc2RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.15
otuc2RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.16
otuc2RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.17
otuc2DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.18
otuc2DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :259085	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.19
otuc2ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.17.1.1.20

otuc3Table

table

.1.3.6.1.4.1.42229.1.2.4.1.18.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc3Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc3Table'

Copy

Represents the otuc3 object

otuc3Entry row .1.3.6.1.4.1.42229.1.2.4.1.18.1.1

Entry of otuc3Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otuc3FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.1
otuc3AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.2
otuc3OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.3
otuc3AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.4
otuc3AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.5
otuc3ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.6
otuc3ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.7
otuc3ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.8
otuc3ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.9
otuc3TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.10
otuc3TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.11
otuc3TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.12
otuc3TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.13
otuc3TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.14
otuc3RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.15
otuc3RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.16
otuc3RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.17
otuc3DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.18
otuc3DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :388627	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.19
otuc3ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.18.1.1.20

ochOsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.19.1 · 1 row entry · 37 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ochOsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ochOsTable'

Copy

Represents the och-os MO

ochOsEntry row .1.3.6.1.4.1.42229.1.2.4.1.19.1.1

Entry of ochOsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
ochOsModulationFormat Currently och-os modulation format	Enumeration Enumerated Values: 0 notApplicable 1 dpQpsk 2 dp16qam 3 dp8qam 6 nrz 7 dp64qam 8 dpSp16qam 9 dpQpskSp16qam 10 dpSp16qam16qam 11 dp16qam32qam 12 dp32qam64qam 15 dp32qam 17 dpSpqpsk 18 dpSpqpskQpsk	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.1
ochOsLineEncoding Currently line-encoding mode default value :non-differential	Enumeration Enumerated Values: 1 nonDifferential 2 differential	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.2
ochOsFrequency The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0	CoriantTypesFreq Type Constraints: range: 0 range: 191250000..196111250	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.3
ochOsActualFrequency The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0	CoriantTypesFreqGeneric	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.4
ochOsRxFrequency The rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0	CoriantTypesFreq Type Constraints: range: 0 range: 191250000..196111250	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.5
ochOsActualRxFrequency The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and Rx. Conditions:../../pos…	CoriantTypesFreqGeneric	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.6
ochOsLaserEnable The enable switching of output laser. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.7
ochOsRequiredTxOpticalPower This is to support adjustable optical power of Line side. default value :1.0	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.8
ochOsActualTxOpticalPower This is the actual transmitting optical power of Line side. default value :-99.0	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.9
ochOsFecType The FEC type of och-os default value :SDFEC25	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.10
ochOsRxAttenuation This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default value :0.0	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.11
ochOsTxFilterRollOff Transmitter filter roll off factor. default value :0.2	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.12
ochOsPreemphasis Preemphasis of transmitted signal. default value :enabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.13
ochOsPreemphasisValue Preemphasis of transmitted signal. default value :1.0	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.14
ochOsAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.15
ochOsOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.16
ochOsAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.17
ochOsAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.18
ochOsLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19
ochOsLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.20
ochOsServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.21
ochOsDGD Value of Differential Group Delay UNITS:ps	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.22
ochOsCD Value of Chromatic Dispersion UNITS:ps/nm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.23
ochOsOSNR Current value of OSNR. The result could be OSNR value with dB	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.24
ochOsQFactor Current value of Q-factor	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.25
ochOsPreFecBer Current value of PreFEC Bit Error Ratio. default value :-99.0	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.26
ochOsCdRangeLow low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.27
ochOsCdRangeHigh high value of chromatic dispersion search range. UNITS:ps/nm default value :45000	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.28
ochOsPropagateShutdown When the attribute value is set to yes, the transmit laser will be shutdown if the whole service of the direction has signal failure, the function mainly used in regeneration node to propagate signal failure as LOS. …	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29
ochOsFastSopMode Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.31
ochOsRateClass Carried OTN signal basic rate class	Enumeration Enumerated Values: 1 t10g 2 t11g 3 t100g 4 t150g 5 t200g 6 t300g 7 t400g 8 t500g 9 t600g 10 t250g 11 t350g 12 t450g 13 t550g	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.32
ochOsManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.33
ochOsBICHM The BICHM (bit interleaved coded hybrid modulation) incremental step in 1/128 bits/symbol added to base modulation bits/symbol for the hybrid modes modulation-format. 0: Base modulation format bits/symbol; 1: 1/128 bit…	Integer32 Constraints: range: 0-127	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.34
ochOsCdCompensationMode chromatic dispersion compensation value source mode default value :auto	Enumeration Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.35
ochOsCdCompensationValue manual chromatic dispersion compensation value UNITS:ps/nm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.36
ochOsPropagateShutdownHoldoffTimer The hold off time of propagate shutdown. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.37
ochOsSOPVector The RX SOP (State Of Polarization) Stokes Vector S1 S2 S3 S1: the degree of linearly polarized light aligned to horizontal (X) axis S2: the degree of linearly polarized light aligned to +45 degree axis S3: the degree of…	OctetString Constraints: range: 0-18	.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.38

wan10gSonetTable

table

.1.3.6.1.4.1.42229.1.2.4.1.30.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk wan10gSonetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::wan10gSonetTable'

Copy

Represents the 10GWAN_SONET object.

wan10gSonetEntry row .1.3.6.1.4.1.42229.1.2.4.1.30.1.1

Entry of wan10gSonetTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
wan10gSonetMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.1
wan10gSonetAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.2
wan10gSonetOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.3
wan10gSonetAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.4
wan10gSonetAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.5
wan10gSonetClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.6
wan10gSonetClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.7
wan10gSonetHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.8
wan10gSonetNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.9
wan10gSonetAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.10
wan10gSonetLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.11
wan10gSonetLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.12
wan10gSonetTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.13
wan10gSonetTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.14
wan10gSonetServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.15
wan10gSonetExpTrc The expected trc(trail trace identification)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.16
wan10gSonetTxTrc The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.17
wan10gSonetRxTrc The received trc(trail trace identification)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.18
wan10gSonetTimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.19
wan10gSonetTimMonitor The enable switching of tim defect monitor mode default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.20
wan10gSonetAisType NULL default value :Generic-AIS	Enumeration Enumerated Values: 0 genericAis 1 msAis 2 aisL	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.21
wan10gSonetManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.30.1.1.22

wan10gSdhTable

table

.1.3.6.1.4.1.42229.1.2.4.1.31.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk wan10gSdhTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::wan10gSdhTable'

Copy

Represents the 10GWAN_SDH object.

wan10gSdhEntry row .1.3.6.1.4.1.42229.1.2.4.1.31.1.1

Entry of wan10gSdhTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
wan10gSdhMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.1
wan10gSdhAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.2
wan10gSdhOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.3
wan10gSdhAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.4
wan10gSdhAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.5
wan10gSdhClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.6
wan10gSdhClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.7
wan10gSdhHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.8
wan10gSdhNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.9
wan10gSdhAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.10
wan10gSdhLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.11
wan10gSdhLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.12
wan10gSdhTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.13
wan10gSdhTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.14
wan10gSdhServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.15
wan10gSdhExpTrc The expected trc(trail trace identification)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.16
wan10gSdhTxTrc The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.17
wan10gSdhRxTrc The received trc(trail trace identification)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.18
wan10gSdhTimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.19
wan10gSdhTimMonitor The enable switching of tim defect monitor mode default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.20
wan10gSdhAisType NULL default value :Generic-AIS	Enumeration Enumerated Values: 0 genericAis 1 msAis 2 aisL	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.21
wan10gSdhManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.31.1.1.22

eth10gStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.32.1 · 1 row entry · 42 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth10gStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth10gStatisticsTable'

Copy

NULL

eth10gStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.32.1.1

Entry of eth10gStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth10gStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.1
eth10gStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.2
eth10gStatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.3
eth10gStatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.4
eth10gStatisticsEntryInSymbolErrors the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.5
eth10gStatisticsEntryInDropEvents the statistics counting for input signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.6
eth10gStatisticsEntryInOctets the statistics counting for input signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.7
eth10gStatisticsEntryInPackets the statistics counting for input signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.8
eth10gStatisticsEntryInBroadcastPackets the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.9
eth10gStatisticsEntryInMulticastPackets the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.10
eth10gStatisticsEntryInCrcAlignErrors the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.11
eth10gStatisticsEntryInUndersizePackets the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.12
eth10gStatisticsEntryInOversizePackets the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.13
eth10gStatisticsEntryInFragments the statistics counting for input fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.14
eth10gStatisticsEntryInJabbers the statistics counting for input jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.15
eth10gStatisticsEntryInPackets64octets the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.16
eth10gStatisticsEntryInPackets65to127octets the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.17
eth10gStatisticsEntryInPackets128to255octets the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.18
eth10gStatisticsEntryInPackets256to511octets the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.19
eth10gStatisticsEntryInPackets512to1023octets the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.20
eth10gStatisticsEntryInPackets1024to1518octets the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.21
eth10gStatisticsEntryOutSymbolErrors the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.22
eth10gStatisticsEntryOutDropEvents the statistics counting for output signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.23
eth10gStatisticsEntryOutOctets the statistics counting for output signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.24
eth10gStatisticsEntryOutPackets the statistics counting for output signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.25
eth10gStatisticsEntryOutBroadcastPackets the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.26
eth10gStatisticsEntryOutMulticastPackets the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.27
eth10gStatisticsEntryOutCrcAlignErrors the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.28
eth10gStatisticsEntryOutUndersizePackets the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.29
eth10gStatisticsEntryOutOversizePackets the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.30
eth10gStatisticsEntryOutFragments the statistics counting for output fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.31
eth10gStatisticsEntryOutJabbers the statistics counting for output jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.32
eth10gStatisticsEntryOutPackets64octets the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.33
eth10gStatisticsEntryOutPackets65to127octets the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.34
eth10gStatisticsEntryOutPackets128to255octets the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.35
eth10gStatisticsEntryOutPackets256to511octets the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.36
eth10gStatisticsEntryOutPackets512to1023octets the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.37
eth10gStatisticsEntryOutPackets1024to1518octets the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.38
eth10gStatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.39
eth10gStatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.40
eth10gStatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.41
eth10gStatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.32.1.1.42

oduStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.33.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oduStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oduStatisticsTable'

Copy

NULL

oduStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.33.1.1

Entry of oduStatisticsTable

Indexes

shelfId slotId subslotId portId subportId odutypeL1 oduidL1 odutypeL2 oduidL2 odutypeL3 oduidL3 odutypeL4 oduidL4

Column	Syntax	OID
oduStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.33.1.1.1
oduStatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.33.1.1.2
oduStatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.33.1.1.3
oduStatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.33.1.1.4
oduStatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.33.1.1.5
oduStatisticsEntryEncryptionFailRx Failed Encryption Frames of Receive side, corresponding to pm parameter Encryption-fail-rx UNITS:frames	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.33.1.1.6

eth40gStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.34.1 · 1 row entry · 42 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth40gStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth40gStatisticsTable'

Copy

NULL

eth40gStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.34.1.1

Entry of eth40gStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth40gStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.1
eth40gStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.2
eth40gStatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.3
eth40gStatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.4
eth40gStatisticsEntryInSymbolErrors the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.5
eth40gStatisticsEntryInDropEvents the statistics counting for input signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.6
eth40gStatisticsEntryInOctets the statistics counting for input signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.7
eth40gStatisticsEntryInPackets the statistics counting for input signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.8
eth40gStatisticsEntryInBroadcastPackets the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.9
eth40gStatisticsEntryInMulticastPackets the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.10
eth40gStatisticsEntryInCrcAlignErrors the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.11
eth40gStatisticsEntryInUndersizePackets the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.12
eth40gStatisticsEntryInOversizePackets the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.13
eth40gStatisticsEntryInFragments the statistics counting for input fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.14
eth40gStatisticsEntryInJabbers the statistics counting for input jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.15
eth40gStatisticsEntryInPackets64octets the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.16
eth40gStatisticsEntryInPackets65to127octets the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.17
eth40gStatisticsEntryInPackets128to255octets the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.18
eth40gStatisticsEntryInPackets256to511octets the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.19
eth40gStatisticsEntryInPackets512to1023octets the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.20
eth40gStatisticsEntryInPackets1024to1518octets the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.21
eth40gStatisticsEntryOutSymbolErrors the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.22
eth40gStatisticsEntryOutDropEvents the statistics counting for output signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.23
eth40gStatisticsEntryOutOctets the statistics counting for output signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.24
eth40gStatisticsEntryOutPackets the statistics counting for output signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.25
eth40gStatisticsEntryOutBroadcastPackets the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.26
eth40gStatisticsEntryOutMulticastPackets the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.27
eth40gStatisticsEntryOutCrcAlignErrors the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.28
eth40gStatisticsEntryOutUndersizePackets the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.29
eth40gStatisticsEntryOutOversizePackets the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.30
eth40gStatisticsEntryOutFragments the statistics counting for output fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.31
eth40gStatisticsEntryOutJabbers the statistics counting for output jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.32
eth40gStatisticsEntryOutPackets64octets the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.33
eth40gStatisticsEntryOutPackets65to127octets the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.34
eth40gStatisticsEntryOutPackets128to255octets the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.35
eth40gStatisticsEntryOutPackets256to511octets the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.36
eth40gStatisticsEntryOutPackets512to1023octets the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.37
eth40gStatisticsEntryOutPackets1024to1518octets the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.38
eth40gStatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.39
eth40gStatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.40
eth40gStatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.41
eth40gStatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.34.1.1.42

eth100gStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.35.1 · 1 row entry · 42 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth100gStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth100gStatisticsTable'

Copy

NULL

eth100gStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.35.1.1

Entry of eth100gStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth100gStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.1
eth100gStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.2
eth100gStatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.3
eth100gStatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.4
eth100gStatisticsEntryInSymbolErrors the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.5
eth100gStatisticsEntryInDropEvents the statistics counting for input signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.6
eth100gStatisticsEntryInOctets the statistics counting for input signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.7
eth100gStatisticsEntryInPackets the statistics counting for input signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.8
eth100gStatisticsEntryInBroadcastPackets the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.9
eth100gStatisticsEntryInMulticastPackets the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.10
eth100gStatisticsEntryInCrcAlignErrors the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.11
eth100gStatisticsEntryInUndersizePackets the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.12
eth100gStatisticsEntryInOversizePackets the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.13
eth100gStatisticsEntryInFragments the statistics counting for input fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.14
eth100gStatisticsEntryInJabbers the statistics counting for input jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.15
eth100gStatisticsEntryInPackets64octets the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.16
eth100gStatisticsEntryInPackets65to127octets the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.17
eth100gStatisticsEntryInPackets128to255octets the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.18
eth100gStatisticsEntryInPackets256to511octets the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.19
eth100gStatisticsEntryInPackets512to1023octets the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.20
eth100gStatisticsEntryInPackets1024to1518octets the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.21
eth100gStatisticsEntryOutSymbolErrors the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.22
eth100gStatisticsEntryOutDropEvents the statistics counting for output signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.23
eth100gStatisticsEntryOutOctets the statistics counting for output signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.24
eth100gStatisticsEntryOutPackets the statistics counting for output signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.25
eth100gStatisticsEntryOutBroadcastPackets the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.26
eth100gStatisticsEntryOutMulticastPackets the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.27
eth100gStatisticsEntryOutCrcAlignErrors the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.28
eth100gStatisticsEntryOutUndersizePackets the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.29
eth100gStatisticsEntryOutOversizePackets the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.30
eth100gStatisticsEntryOutFragments the statistics counting for output fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.31
eth100gStatisticsEntryOutJabbers the statistics counting for output jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.32
eth100gStatisticsEntryOutPackets64octets the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.33
eth100gStatisticsEntryOutPackets65to127octets the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.34
eth100gStatisticsEntryOutPackets128to255octets the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.35
eth100gStatisticsEntryOutPackets256to511octets the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.36
eth100gStatisticsEntryOutPackets512to1023octets the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.37
eth100gStatisticsEntryOutPackets1024to1518octets the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.38
eth100gStatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.39
eth100gStatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.40
eth100gStatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.41
eth100gStatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.35.1.1.42

otu4StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.36.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otu4StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otu4StatisticsTable'

Copy

NULL

otu4StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.36.1.1

Entry of otu4StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otu4StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.1
otu4StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.2
otu4StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.3
otu4StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.4
otu4StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.5
otu4StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.6
otu4StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.7
otu4StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.36.1.1.8

otu2StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.37.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otu2StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otu2StatisticsTable'

Copy

NULL

otu2StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.37.1.1

Entry of otu2StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otu2StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.1
otu2StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.2
otu2StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.3
otu2StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.4
otu2StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.5
otu2StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.6
otu2StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.7
otu2StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.37.1.1.8

otu2eStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.38.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otu2eStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otu2eStatisticsTable'

Copy

NULL

otu2eStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.38.1.1

Entry of otu2eStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otu2eStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.1
otu2eStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.2
otu2eStatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.3
otu2eStatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.4
otu2eStatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.5
otu2eStatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.6
otu2eStatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.7
otu2eStatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.38.1.1.8

oc192StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.39.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oc192StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oc192StatisticsTable'

Copy

NULL

oc192StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.39.1.1

Entry of oc192StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
oc192StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.39.1.1.1
oc192StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.39.1.1.2
oc192StatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.39.1.1.3
oc192StatisticsEntryInErroredSeconds the statistics seconds counting for RX errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.39.1.1.4
oc192StatisticsEntryInSeverelyErroredSeconds the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.39.1.1.5
oc192StatisticsEntryInUnavailableSeconds the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.39.1.1.6
oc192StatisticsEntryInSeverelyErroredFrameSecond the statistics seconds counting for ingress signal frame severely errored, corresponding to pm parameter SEFS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.39.1.1.7

stm64StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.40.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk stm64StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::stm64StatisticsTable'

Copy

NULL

stm64StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.40.1.1

Entry of stm64StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
stm64StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.40.1.1.1
stm64StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.40.1.1.2
stm64StatisticsEntryInBackgroundBlockError the statistics counting for ingress errored blocks, corresponding to pm parameter BBE UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.40.1.1.3
stm64StatisticsEntryInErroredSeconds the statistics seconds counting for RX errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.40.1.1.4
stm64StatisticsEntryInSeverelyErroredSeconds the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.40.1.1.5
stm64StatisticsEntryInUnavailableSeconds the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.40.1.1.6
stm64StatisticsEntryInOutOfFrameSeconds the statistics seconds counting for ingress signal lose of frame, corresponding to pm parameter OFS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.40.1.1.7

wan10gSonetStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.41.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk wan10gSonetStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::wan10gSonetStatisticsTable'

Copy

NULL

wan10gSonetStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.41.1.1

Entry of wan10gSonetStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
wan10gSonetStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.41.1.1.1
wan10gSonetStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.41.1.1.2
wan10gSonetStatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.41.1.1.3
wan10gSonetStatisticsEntryInErroredSeconds the statistics seconds counting for RX errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.41.1.1.4
wan10gSonetStatisticsEntryInSeverelyErroredSeconds the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.41.1.1.5
wan10gSonetStatisticsEntryInUnavailableSeconds the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.41.1.1.6
wan10gSonetStatisticsEntryInSeverelyErroredFrameSecond the statistics seconds counting for ingress signal frame severely errored, corresponding to pm parameter SEFS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.41.1.1.7

wan10gSdhStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.42.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk wan10gSdhStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::wan10gSdhStatisticsTable'

Copy

NULL

wan10gSdhStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.42.1.1

Entry of wan10gSdhStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
wan10gSdhStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.42.1.1.1
wan10gSdhStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.42.1.1.2
wan10gSdhStatisticsEntryInBackgroundBlockError the statistics counting for ingress errored blocks, corresponding to pm parameter BBE UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.42.1.1.3
wan10gSdhStatisticsEntryInErroredSeconds the statistics seconds counting for RX errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.42.1.1.4
wan10gSdhStatisticsEntryInSeverelyErroredSeconds the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.42.1.1.5
wan10gSdhStatisticsEntryInUnavailableSeconds the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.42.1.1.6
wan10gSdhStatisticsEntryInOutOfFrameSeconds the statistics seconds counting for ingress signal lose of frame, corresponding to pm parameter OFS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.42.1.1.7

fc8gStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.43.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk fc8gStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::fc8gStatisticsTable'

Copy

NULL

fc8gStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.43.1.1

Entry of fc8gStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
fc8gStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.43.1.1.1
fc8gStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.43.1.1.2
fc8gStatisticsEntryInSymbolErrors the statistics Times counting for signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.43.1.1.3

fc16gStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.44.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk fc16gStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::fc16gStatisticsTable'

Copy

NULL

fc16gStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.44.1.1

Entry of fc16gStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
fc16gStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.44.1.1.1
fc16gStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.44.1.1.2
fc16gStatisticsEntryInSymbolErrors the statistics Times counting for signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.44.1.1.3

otuc2StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.45.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc2StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc2StatisticsTable'

Copy

NULL

otuc2StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.45.1.1

Entry of otuc2StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otuc2StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.1
otuc2StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.2
otuc2StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.3
otuc2StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.4
otuc2StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.5
otuc2StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.6
otuc2StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.7
otuc2StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.45.1.1.8

otuc3StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.46.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc3StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc3StatisticsTable'

Copy

NULL

otuc3StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.46.1.1

Entry of otuc3StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otuc3StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.1
otuc3StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.2
otuc3StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.3
otuc3StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.4
otuc3StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.5
otuc3StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.6
otuc3StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.7
otuc3StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.46.1.1.8

ochOsStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.47.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ochOsStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ochOsStatisticsTable'

Copy

NULL

ochOsStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.47.1.1

Entry of ochOsStatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
ochOsStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.47.1.1.1
ochOsStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.47.1.1.2
ochOsStatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.47.1.1.3
ochOsStatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.47.1.1.4

otuc6Table

table

.1.3.6.1.4.1.42229.1.2.4.1.48.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc6Table'

Copy

Represents the otuc6 object

otuc6Entry row .1.3.6.1.4.1.42229.1.2.4.1.48.1.1

Entry of otuc6Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otuc6FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.1
otuc6AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.2
otuc6OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.3
otuc6AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.4
otuc6AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.5
otuc6ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.6
otuc6ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.7
otuc6ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.8
otuc6ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.9
otuc6TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.10
otuc6TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.11
otuc6TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.12
otuc6TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.13
otuc6TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.14
otuc6RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.15
otuc6RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.16
otuc6RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.17
otuc6DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.18
otuc6DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :777255	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.19
otuc6ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.48.1.1.20

otuc6StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.49.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc6StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc6StatisticsTable'

Copy

NULL

otuc6StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.49.1.1

Entry of otuc6StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
otuc6StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.1
otuc6StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.2
otuc6StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.3
otuc6StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.4
otuc6StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.5
otuc6StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.6
otuc6StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.7
otuc6StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.49.1.1.8

otuc4Table

table

.1.3.6.1.4.1.42229.1.2.4.1.50.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc4Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc4Table'

Copy

Represents the otuc6 object

otuc4Entry row .1.3.6.1.4.1.42229.1.2.4.1.50.1.1

Entry of otuc4Table

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc4FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.1
otuc4AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.2
otuc4OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.3
otuc4AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.4
otuc4AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.5
otuc4ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.6
otuc4ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.7
otuc4ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.8
otuc4ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.9
otuc4TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.10
otuc4TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.11
otuc4TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.12
otuc4TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.13
otuc4TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.14
otuc4RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.15
otuc4RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.16
otuc4RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.17
otuc4DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.18
otuc4DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :518170	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.19
otuc4ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.50.1.1.20

otuc4StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.51.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc4StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc4StatisticsTable'

Copy

NULL

otuc4StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.51.1.1

Entry of otuc4StatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc4StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.1
otuc4StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.2
otuc4StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.3
otuc4StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.4
otuc4StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.5
otuc4StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.6
otuc4StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.7
otuc4StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.51.1.1.8

otuc5Table

table

.1.3.6.1.4.1.42229.1.2.4.1.52.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc5Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc5Table'

Copy

Represents the otuc5 object

otuc5Entry row .1.3.6.1.4.1.42229.1.2.4.1.52.1.1

Entry of otuc5Table

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc5FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.1
otuc5AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.2
otuc5OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.3
otuc5AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.4
otuc5AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.5
otuc5ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.6
otuc5ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.7
otuc5ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.8
otuc5ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.9
otuc5TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.10
otuc5TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.11
otuc5TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.12
otuc5TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.13
otuc5TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.14
otuc5RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.15
otuc5RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.16
otuc5RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.17
otuc5DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.18
otuc5DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :647712	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.19
otuc5ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.52.1.1.20

otuc5StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.53.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc5StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc5StatisticsTable'

Copy

NULL

otuc5StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.53.1.1

Entry of otuc5StatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc5StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.1
otuc5StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.2
otuc5StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.3
otuc5StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.4
otuc5StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.5
otuc5StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.6
otuc5StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.7
otuc5StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.53.1.1.8

eth400gTable

table

.1.3.6.1.4.1.42229.1.2.4.1.54.1 · 1 row entry · 21 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth400gTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth400gTable'

Copy

Represents the 400GBE object.

eth400gEntry row .1.3.6.1.4.1.42229.1.2.4.1.54.1.1

Entry of eth400gTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth400gEthFecType The FEC working type of etyn port. default value :auto	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.1
eth400gEthFecTypeState The FEC working state of etyn port. default value :disabled	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.2
eth400gTransmitInterpacketgap Specifies the minimum transmit IPG value. default value :8	Unsigned32 Constraints: range: 8-12	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.3
eth400gGfpPayloadFcs Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value …	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.4
eth400gMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.5
eth400gAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.6
eth400gOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.7
eth400gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.8
eth400gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.9
eth400gClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.10
eth400gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.11
eth400gHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.12
eth400gNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.13
eth400gAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.14
eth400gLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.15
eth400gLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.16
eth400gTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.17
eth400gTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.18
eth400gServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.19
eth400gManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.20
eth400gLldpStatusIf Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and recei…	Enumeration Enumerated Values: 0 notApplicable 2 rxonly 3 txandrx 4 disabled	.1.3.6.1.4.1.42229.1.2.4.1.54.1.1.22

eth400gStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.55.1 · 1 row entry · 42 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth400gStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth400gStatisticsTable'

Copy

NULL

eth400gStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.55.1.1

Entry of eth400gStatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
eth400gStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.1
eth400gStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.2
eth400gStatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.3
eth400gStatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.4
eth400gStatisticsEntryInSymbolErrors the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.5
eth400gStatisticsEntryInDropEvents the statistics counting for input signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.6
eth400gStatisticsEntryInOctets the statistics counting for input signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.7
eth400gStatisticsEntryInPackets the statistics counting for input signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.8
eth400gStatisticsEntryInBroadcastPackets the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.9
eth400gStatisticsEntryInMulticastPackets the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.10
eth400gStatisticsEntryInCrcAlignErrors the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.11
eth400gStatisticsEntryInUndersizePackets the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.12
eth400gStatisticsEntryInOversizePackets the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.13
eth400gStatisticsEntryInFragments the statistics counting for input fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.14
eth400gStatisticsEntryInJabbers the statistics counting for input jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.15
eth400gStatisticsEntryInPackets64octets the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.16
eth400gStatisticsEntryInPackets65to127octets the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.17
eth400gStatisticsEntryInPackets128to255octets the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.18
eth400gStatisticsEntryInPackets256to511octets the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.19
eth400gStatisticsEntryInPackets512to1023octets the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.20
eth400gStatisticsEntryInPackets1024to1518octets the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.21
eth400gStatisticsEntryOutSymbolErrors the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.22
eth400gStatisticsEntryOutDropEvents the statistics counting for output signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.23
eth400gStatisticsEntryOutOctets the statistics counting for output signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.24
eth400gStatisticsEntryOutPackets the statistics counting for output signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.25
eth400gStatisticsEntryOutBroadcastPackets the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.26
eth400gStatisticsEntryOutMulticastPackets the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.27
eth400gStatisticsEntryOutCrcAlignErrors the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.28
eth400gStatisticsEntryOutUndersizePackets the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.29
eth400gStatisticsEntryOutOversizePackets the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.30
eth400gStatisticsEntryOutFragments the statistics counting for output fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.31
eth400gStatisticsEntryOutJabbers the statistics counting for output jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.32
eth400gStatisticsEntryOutPackets64octets the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.33
eth400gStatisticsEntryOutPackets65to127octets the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.34
eth400gStatisticsEntryOutPackets128to255octets the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.35
eth400gStatisticsEntryOutPackets256to511octets the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.36
eth400gStatisticsEntryOutPackets512to1023octets the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.37
eth400gStatisticsEntryOutPackets1024to1518octets the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.38
eth400gStatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.39
eth400gStatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.40
eth400gStatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.41
eth400gStatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.55.1.1.42

oc48Table

table

.1.3.6.1.4.1.42229.1.2.4.1.56.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oc48Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oc48Table'

Copy

Represents the OC48 object.

oc48Entry row .1.3.6.1.4.1.42229.1.2.4.1.56.1.1

Entry of oc48Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
oc48MappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.1
oc48AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.2
oc48OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.3
oc48AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.4
oc48AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.5
oc48ClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.6
oc48ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.7
oc48HoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.8
oc48NearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.9
oc48AlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.10
oc48LoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.11
oc48LoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.12
oc48TestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.13
oc48TestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.14
oc48ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.15
oc48ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.16
oc48ExpTrc The expected trc(trail trace identification)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.17
oc48TxTrc The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.18
oc48RxTrc The received trc(trail trace identification)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.19
oc48TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.20
oc48TimMonitor The enable switching of tim defect monitor mode default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.21
oc48AisType NULL default value :Generic-AIS	Enumeration Enumerated Values: 0 genericAis 1 msAis 2 aisL	.1.3.6.1.4.1.42229.1.2.4.1.56.1.1.22

oc48StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.57.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oc48StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oc48StatisticsTable'

Copy

NULL

oc48StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.57.1.1

Entry of oc48StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
oc48StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.57.1.1.1
oc48StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.57.1.1.2
oc48StatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.57.1.1.3
oc48StatisticsEntryInErroredSeconds the statistics seconds counting for RX errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.57.1.1.4
oc48StatisticsEntryInSeverelyErroredSeconds the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.57.1.1.5
oc48StatisticsEntryInUnavailableSeconds the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.57.1.1.6
oc48StatisticsEntryInSeverelyErroredFrameSecond the statistics seconds counting for ingress signal frame severely errored, corresponding to pm parameter SEFS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.57.1.1.7

stm16Table

table

.1.3.6.1.4.1.42229.1.2.4.1.58.1 · 1 row entry · 22 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk stm16Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::stm16Table'

Copy

Represents the STM16 object.

stm16Entry row .1.3.6.1.4.1.42229.1.2.4.1.58.1.1

Entry of stm16Table

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
stm16MappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.1
stm16AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.2
stm16OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.3
stm16AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.4
stm16AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.5
stm16ClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.6
stm16ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.7
stm16HoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.8
stm16NearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.9
stm16AlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.10
stm16LoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.11
stm16LoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.12
stm16TestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.13
stm16TestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.14
stm16ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.15
stm16ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.16
stm16ExpTrc The expected trc(trail trace identification)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.17
stm16TxTrc The transmitter trc(trail trace identification) Conditions:ancestor::card/switching-type = 'tdm'	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.18
stm16RxTrc The received trc(trail trace identification)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.19
stm16TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.20
stm16TimMonitor The enable switching of tim defect monitor mode default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.21
stm16AisType NULL default value :Generic-AIS	Enumeration Enumerated Values: 0 genericAis 1 msAis 2 aisL	.1.3.6.1.4.1.42229.1.2.4.1.58.1.1.22

stm16StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.59.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk stm16StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::stm16StatisticsTable'

Copy

NULL

stm16StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.59.1.1

Entry of stm16StatisticsTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
stm16StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.59.1.1.1
stm16StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.59.1.1.2
stm16StatisticsEntryInBackgroundBlockError the statistics counting for ingress errored blocks, corresponding to pm parameter BBE UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.59.1.1.3
stm16StatisticsEntryInErroredSeconds the statistics seconds counting for RX errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.59.1.1.4
stm16StatisticsEntryInSeverelyErroredSeconds the statistics seconds counting for RX severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.59.1.1.5
stm16StatisticsEntryInUnavailableSeconds the statistics seconds counting for RX unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.59.1.1.6
stm16StatisticsEntryInOutOfFrameSeconds the statistics seconds counting for ingress signal lose of frame, corresponding to pm parameter OFS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.59.1.1.7

otuc7Table

table

.1.3.6.1.4.1.42229.1.2.4.1.60.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc7Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc7Table'

Copy

Represents the otuc7 object

otuc7Entry row .1.3.6.1.4.1.42229.1.2.4.1.60.1.1

Entry of otuc7Table

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc7FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.1
otuc7AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.2
otuc7OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.3
otuc7AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.4
otuc7AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.5
otuc7ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.6
otuc7ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.7
otuc7ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.8
otuc7ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.9
otuc7TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.10
otuc7TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.11
otuc7TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.12
otuc7TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.13
otuc7TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.14
otuc7RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.15
otuc7RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.16
otuc7RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.17
otuc7ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.18
otuc7DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.19
otuc7DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :906797	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.60.1.1.20

otuc7StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.61.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc7StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc7StatisticsTable'

Copy

NULL

otuc7StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.61.1.1

Entry of otuc7StatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc7StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.1
otuc7StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.2
otuc7StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.3
otuc7StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.4
otuc7StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.5
otuc7StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.6
otuc7StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.7
otuc7StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.61.1.1.8

otuc9Table

table

.1.3.6.1.4.1.42229.1.2.4.1.62.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc9Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc9Table'

Copy

Represents the otuc9 object

otuc9Entry row .1.3.6.1.4.1.42229.1.2.4.1.62.1.1

Entry of otuc9Table

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc9FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.1
otuc9AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.2
otuc9OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.3
otuc9AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.4
otuc9AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.5
otuc9ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.6
otuc9ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.7
otuc9ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.8
otuc9ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.9
otuc9TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.10
otuc9TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.11
otuc9TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.12
otuc9TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.13
otuc9TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.14
otuc9RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.15
otuc9RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.16
otuc9RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.17
otuc9ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.18
otuc9DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.19
otuc9DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1165881	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.62.1.1.20

otuc9StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.63.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc9StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc9StatisticsTable'

Copy

NULL

otuc9StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.63.1.1

Entry of otuc9StatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc9StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.1
otuc9StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.2
otuc9StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.3
otuc9StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.4
otuc9StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.5
otuc9StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.6
otuc9StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.7
otuc9StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.63.1.1.8

otuc11Table

table

.1.3.6.1.4.1.42229.1.2.4.1.64.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc11Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc11Table'

Copy

Represents the otuc11 object

otuc11Entry row .1.3.6.1.4.1.42229.1.2.4.1.64.1.1

Entry of otuc11Table

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc11FecType The FEC type of client OTUk. Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport') default value :G709	CoriantTypesOtukFec Type Values: 1 sdfec15 2 sdfec25 3 g709 4 i4 5 i7 6 nofec 7 staircase7 8 sdfec15nd 9 sdfec27nd 10 sdfec15nd2 11 transparent 12 ufec7	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.1
otuc11AdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.2
otuc11OperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.3
otuc11AvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.4
otuc11AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.5
otuc11ServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.6
otuc11ExpSapi The expected sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.7
otuc11ExpDapi The expected dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.8
otuc11ExpOperator The expected operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.9
otuc11TxSapi The transmitter sapi(Source Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.10
otuc11TxDapi The transmitter dapi(Destination Access Point Identifier)	CoriantTypesTtiType15 Type Constraints: range: 0..15	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.11
otuc11TxOperator The transmitter operator TTI	CoriantTypesTtiType32 Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.12
otuc11TimDefectMode The tim defect selection mode default value :NONE	CoriantTypesTimMode Type Values: 0 none 1 sapi 2 dapi 3 oper 4 sapiDapi 5 sapiOper 6 dapiOper 7 sapiDapiOper	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.13
otuc11TimAct The enable switching of inserting AIS by tim function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.14
otuc11RxSapi The received sapi(Source Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.15
otuc11RxDapi The received dapi(Destination Access Point Identifier)	OctetString Constraints: range: 0-15	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.16
otuc11RxOperator The received operator TTI	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.17
otuc11ManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.18
otuc11DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. default va…	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.19
otuc11DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection. default value :1424967	Unsigned32 Constraints: range: 1-2590845	.1.3.6.1.4.1.42229.1.2.4.1.64.1.1.20

otuc11StatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.65.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otuc11StatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otuc11StatisticsTable'

Copy

NULL

otuc11StatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.65.1.1

Entry of otuc11StatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
otuc11StatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.1
otuc11StatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.2
otuc11StatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.3
otuc11StatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.4
otuc11StatisticsEntryErroredBlocks the statistics counting for errored blocks, corresponding to pm parameter EB UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.5
otuc11StatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.6
otuc11StatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.7
otuc11StatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.65.1.1.8

eth1gTable

table

.1.3.6.1.4.1.42229.1.2.4.1.66.1 · 1 row entry · 27 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth1gTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth1gTable'

Copy

NULL

eth1gEntry row .1.3.6.1.4.1.42229.1.2.4.1.66.1.1

Entry of eth1gTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
eth1gEthFecType The FEC working type of etyn port. default value :auto	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.1
eth1gEthFecTypeState The FEC working state of etyn port. default value :disabled	CoriantTypesEthFec Type Values: 1 enabled 2 disabled 3 auto	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.2
eth1gTransmitInterpacketgap Specifies the minimum transmit IPG value. default value :8	Unsigned32 Constraints: range: 8-12	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.3
eth1gGfpPayloadFcs Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed; Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used. default value …	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.4
eth1gMappingMode The mapping mode of client port packets into ODUk. default value :not-applicable	Enumeration Enumerated Values: 0 notApplicable 1 gmp 2 gfpF 3 t40gbmpOdu2e 4 preamble 5 bmpFixedstuff 6 bmp 7 amp 8 tttGmp	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.5
eth1gAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.6
eth1gOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.7
eth1gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.8
eth1gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.9
eth1gClientShutdown The switching of client-shutdown. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.10
eth1gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction. UNITS:milliseconds default value :0	Unsigned32 Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.11
eth1gHoldoffSignal Specify if specific signal will be sent out during hold off time which avoid downstream equipment consequent action in the duration. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.12
eth1gNearEndAls The switching of near end ALS. default value :no	CoriantTypesYesNo Type Values: 1 yes 2 no	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.13
eth1gAlsDegradeMode The switching of defect BERSD-ODU trig ALS default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.14
eth1gLoopbackEnable The enable switching of loopback function. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.15
eth1gLoopbackType The type mode of loopback function default value :none	Enumeration Enumerated Values: 0 none 1 terminal 2 facility	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.16
eth1gTestSignalType The type mode of test signal. default value :NONE	CoriantTypesTestSignalType Type Values: 0 none 1 prbs 3 idle	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.17
eth1gTestSignalEnable The enable switching of test signal function default value :NONE	CoriantTypesTestSignalConfig Type Values: 0 none 3 rxtx	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.18
eth1gServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.19
eth1gManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.20
eth1gLldpStatusIf Port level lldp control. Value of 'rxonly', then the LLDP agent will receive lldp, when lldp-status-ne is also enabled. Value of 'disabled', then LLDP agent will not filter and recei…	Enumeration Enumerated Values: 0 notApplicable 2 rxonly 3 txandrx 4 disabled	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.21
eth1gSpeed Set speed of the interface, unit mbps. This is for ETH facility. default value :1000	Unsigned32 Constraints: range: 10-10 range: 100-100 range: 1000-1000	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.22
eth1gDuplex Set duplex selections. default value :full	Enumeration Enumerated Values: 0 half 1 full	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.23
eth1gMtu Set Maximum Frame Size. default value :1500	Unsigned32 Constraints: range: 1280-1500	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.24
eth1gAutoNegotiation Set Auto Negotiation: Enabled/Disabled. default value :enabled	Enumeration Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.25
eth1gCurrSpeed speed (UNKNOWN/AUTO/10/100/1000/10000) corresponding to the interface	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.26
eth1gCurrDuplex duplex (HALF/FULL) corresponding to the interface	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.66.1.1.27

eth1gStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.1.67.1 · 1 row entry · 42 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk eth1gStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::eth1gStatisticsTable'

Copy

NULL

eth1gStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.1.67.1.1

Entry of eth1gStatisticsTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
eth1gStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.1
eth1gStatisticsEntryLossOfSignalSeconds the statistics seconds counting for signal loss, corresponding to pm parameter loss UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.2
eth1gStatisticsEntryBitErrorFec the statistics bits counting for error bit forward error correction, corresponding to pm parameter BE-FEC UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.3
eth1gStatisticsEntryUncorrectedBlockErrorFec the statistics blocks counting for uncorrected block error forward error correction, corresponding to pm parameter UBE-FEC UNITS:blocks	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.4
eth1gStatisticsEntryInSymbolErrors the statistics Times counting for input signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.5
eth1gStatisticsEntryInDropEvents the statistics counting for input signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.6
eth1gStatisticsEntryInOctets the statistics counting for input signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.7
eth1gStatisticsEntryInPackets the statistics counting for input signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.8
eth1gStatisticsEntryInBroadcastPackets the statistics counting for input broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.9
eth1gStatisticsEntryInMulticastPackets the statistics counting for input multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.10
eth1gStatisticsEntryInCrcAlignErrors the statistics counting for input CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.11
eth1gStatisticsEntryInUndersizePackets the statistics counting for input undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.12
eth1gStatisticsEntryInOversizePackets the statistics counting for input oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.13
eth1gStatisticsEntryInFragments the statistics counting for input fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.14
eth1gStatisticsEntryInJabbers the statistics counting for input jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.15
eth1gStatisticsEntryInPackets64octets the statistics counting for input 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.16
eth1gStatisticsEntryInPackets65to127octets the statistics counting for input 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.17
eth1gStatisticsEntryInPackets128to255octets the statistics counting for input 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.18
eth1gStatisticsEntryInPackets256to511octets the statistics counting for input 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.19
eth1gStatisticsEntryInPackets512to1023octets the statistics counting for input 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.20
eth1gStatisticsEntryInPackets1024to1518octets the statistics counting for input 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.21
eth1gStatisticsEntryOutSymbolErrors the statistics Times counting for output signal symbol errors, corresponding to pm parameter SE UNITS:Events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.22
eth1gStatisticsEntryOutDropEvents the statistics counting for output signal drop events, corresponding to pm parameter DropEvents UNITS:events	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.23
eth1gStatisticsEntryOutOctets the statistics counting for output signal octets, corresponding to pm parameter Octets UNITS:octets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.24
eth1gStatisticsEntryOutPackets the statistics counting for output signal packets, corresponding to pm parameter Pkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.25
eth1gStatisticsEntryOutBroadcastPackets the statistics counting for output broadcast packets, corresponding to pm parameter BroadcastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.26
eth1gStatisticsEntryOutMulticastPackets the statistics counting for output multicast packets, corresponding to pm parameter MulticastPkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.27
eth1gStatisticsEntryOutCrcAlignErrors the statistics counting for output CRC error packets, corresponding to pm parameter CRCAlignErrors UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.28
eth1gStatisticsEntryOutUndersizePackets the statistics counting for output undersize packets, corresponding to pm parameter UndersizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.29
eth1gStatisticsEntryOutOversizePackets the statistics counting for output oversize packets, corresponding to pm parameter OversizePkts UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.30
eth1gStatisticsEntryOutFragments the statistics counting for output fragment packets, corresponding to pm parameter Fragments UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.31
eth1gStatisticsEntryOutJabbers the statistics counting for output jabber packets, corresponding to pm parameter Jabbers UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.32
eth1gStatisticsEntryOutPackets64octets the statistics counting for output 64 octets packets, corresponding to pm parameter Pkts64Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.33
eth1gStatisticsEntryOutPackets65to127octets the statistics counting for output 65 to 127 octets packets, corresponding to pm parameter Pkts65to127Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.34
eth1gStatisticsEntryOutPackets128to255octets the statistics counting for output 128 to 255 octets packets, corresponding to pm parameter Pkts128to255Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.35
eth1gStatisticsEntryOutPackets256to511octets the statistics counting for output 256 to 511 octets packets, corresponding to pm parameter Pkts256to511Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.36
eth1gStatisticsEntryOutPackets512to1023octets the statistics counting for output 512 to 1023 octets packets, corresponding to pm parameter Pkts512to1023Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.37
eth1gStatisticsEntryOutPackets1024to1518octets the statistics counting for output 1024 to 1518 octets packets, corresponding to pm parameter Pkts1024to1518Octets UNITS:packets	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.38
eth1gStatisticsEntryInCodingViolation the statistics bits counting for ingress coding violation, corresponding to pm parameter CV UNITS:bits	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.39
eth1gStatisticsEntryErroredSeconds the statistics seconds counting for errored signal, corresponding to pm parameter ES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.40
eth1gStatisticsEntrySeverelyErroredSeconds the statistics seconds counting for severely errored signal, corresponding to pm parameter SES UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.41
eth1gStatisticsEntryUnavailableSeconds the statistics seconds counting for unavailable signal, corresponding to pm parameter UAS UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.1.67.1.1.42

cRSTable

table

.1.3.6.1.4.1.42229.1.2.4.3.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk cRSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::cRSTable'

Copy

Cross connection table.

cRSEntry row .1.3.6.1.4.1.42229.1.2.4.3.1.1

Entry of cRSTable

Indexes

cRSSrcTp cRSDstTp

Column	Syntax	OID
cRSSrcTp Source tp of cross connection.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.3.1.1.1
cRSDstTp Destination tp of cross connection.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.3.1.1.2
cRSServiceLabel Path/service name of cross-connection.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.3.1.1.3
cRSManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.3.1.1.4
cRSAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.3.1.1.5

fiberConnectionTable

table

.1.3.6.1.4.1.42229.1.2.4.4.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk fiberConnectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::fiberConnectionTable'

Copy

Fiber connection table which will be user managed and be explicitly provisioned by user. 
Fiber Connection indicates the physical fiber connection between physical ports or subports.

fiberConnectionEntry row .1.3.6.1.4.1.42229.1.2.4.4.1.1

Entry of fiberConnectionTable

Indexes

fiberConnectionSrcPort fiberConnectionDstPort

Column	Syntax	OID
fiberConnectionSrcPort Source port of fiber connection.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.4.1.1.1
fiberConnectionDstPort Destination port of fiber connection.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.4.1.1.2
fiberConnectionType Indicates fiber connection type. default value :two-way	Enumeration Enumerated Values: 1 twoWay 2 oneWay	.1.3.6.1.4.1.42229.1.2.4.4.1.1.3
fiberConnectionFiberLabel Label of fiber connection.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.4.4.1.1.4
fiberConnectionAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.4.1.1.5
fiberConnectionFixAttenuationDst external fixed attenuator's attenuation from src-port to dst-port	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.4.4.1.1.6
fiberConnectionFixAttenuationSrc external attenuator's attenuation from dst-port to src-port	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.4.4.1.1.7

otsTable

table

.1.3.6.1.4.1.42229.1.2.4.5.2.1 · 1 row entry · 23 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otsTable'

Copy

Represents the Optical Transmission Section (OTS) interface entity

otsEntry row .1.3.6.1.4.1.42229.1.2.4.5.2.1.1

Entry of otsTable

Indexes

otsName

Column	Syntax	OID
otsName The name is defined to uniquely identify the ots optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.1
otsAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.2
otsOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.3
otsAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.4
otsAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.5
otsSupportingRxPort Supporting Rx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.6
otsSupportingTxPort Supporting Tx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.7
otsMeasuredSpanLoss The measured span loss excluding offset.	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.8
otsFiberSpectralAttenuationTilt Specifies the Fiber Spectral Attenuation Tilt. UNITS:dB default value :unspecified	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.9
otsRamanTiltCoefficient Specifies the Fiber Spectral Attenuation Tilt. UNITS:dB/W default value :unspecified	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.10
otsFiberType Indicating fiber type of the OTS span. default value :SSMF	Enumeration Enumerated Values: 1 ssmf 2 leaf 3 twrs 4 twc 5 allwave 6 dsf 7 ls 8 puresilica 9 twreach 10 vistacor 11 teralight 12 drakall 13 twplus 14 twminus 15 pslc 16 oleaf 17 nzDsf 18 ull	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.11
otsExternalTxAttenuation External padding attenuation at transmitting direction. UNITS:dB	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.12
otsFiberLengthTx Specify the fiber length of transmitting direction. UNITS:km default value :auto	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.13
otsFiberLengthTxDerived Derived fiber length of transmitting direction. UNITS:km	CoriantTypesDecimalFract3	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.14
otsSpanDegradeEnable switching for span degrade shutdown function default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.15
otsSpanDegradeLoss The degrade threhsold for recieved span loss default value :28	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.16
otsSpanDegradeHysteresis The hysteresis of optical revocery threshold of recieved default value :2	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.17
otsSpanLossReceive Span loss on the receiver side. Set by the controller and used by device to set AMP gain.	CoriantTypesDBPrecision3	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.20
otsSpanLossTransmit Span loss on the transmitter side. Set by the controller and used by device to configure MSA compliant channel launch power	CoriantTypesDBPrecision3	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.21
otsIngressSpanLossAgingMargin Span-loss margin used to set optical amplifier gain and output-voa. Day one attenuation of the link, at initial commissioning may increase across wdm link life. span-loss-aging-margin defines the maximum additional loss…	CoriantTypesDBPrecision3	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.22
otsEolMaxLoadPIn End Of Life Total input power at maximum load used for amplifier control. Calculated during the design, this value shall be used by the amplifier device for the setting so that the reasonable margin is kept to reach thi…	CoriantTypesOpticalPowerPrecision2	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.23
otsServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.24
otsTargetPowerSetting Allows automatic configuration of target values for oxcon. default value :manual	Enumeration Enumerated Values: 0 manual 1 auto	.1.3.6.1.4.1.42229.1.2.4.5.2.1.1.25

omsTable

table

.1.3.6.1.4.1.42229.1.2.4.5.3.1 · 1 row entry · 15 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk omsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::omsTable'

Copy

Represents the optical multiplex section (OMS) interface MO

omsEntry row .1.3.6.1.4.1.42229.1.2.4.5.3.1.1

Entry of omsTable

Indexes

omsName

Column	Syntax	OID
omsName The name is defined to uniquely identify the oms optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.1
omsAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.2
omsOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.3
omsAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.4
omsAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.5
omsSupportingRxPort Supporting Rx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.6
omsSupportingTxPort Supporting Tx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.7
omsParentOtsInterface Supporting OTS interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.8
omsRxOpticalPower Received optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.9
omsTxOpticalPower Transmitted optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.10
omsGridMode Indicates Grid type of the OMS. default value :not-applicable	CoriantTypesGridType Type Values: 0 notApplicable 1 fixed50g96ch 2 fixed100g48ch 3 fixed75g64ch 4 flexible	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.11
omsInputChannelAttenuationControlMode Specify attenuation control mode of the channel which applicable to all channels of the oms. default value :auto	OpticalCommonAttControlMode Type Values: 0 notApplicable 1 auto 2 manual 3 gainloss 4 off 5 power	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.13
omsOutputChannelAttenuationControlMode Specify attenuation control mode of the channel which applicable to all channels of the oms. default value :auto	OpticalCommonAttControlMode Type Values: 0 notApplicable 1 auto 2 manual 3 gainloss 4 off 5 power	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.14
omsServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.15
omsWorkingMode The oms working mode for FOADM scenario Conditions:deref(../supporting-rx-port)/../switching-type = 'amplifier' default value :no-monitor	OpticalCommonChannelWorkingMode Type Values: 0 noMonitor 1 monitor 2 powerControl	.1.3.6.1.4.1.42229.1.2.4.5.3.1.1.16

oscTable

table

.1.3.6.1.4.1.42229.1.2.4.5.4.1 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oscTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oscTable'

Copy

Represents the Optical Supervision Channel (OSC) MO

oscEntry row .1.3.6.1.4.1.42229.1.2.4.5.4.1.1

Entry of oscTable

Indexes

oscName

Column	Syntax	OID
oscName The name is defined to uniquely identify the osc optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.1
oscAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.2
oscOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.3
oscAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.4
oscAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.5
oscSupportingRxPort Supporting Rx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.6
oscSupportingTxPort Supporting Tx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.7
oscParentOtsInterface Supporting OTS insterface. default value :unassigned	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.8
oscMode Indicating the current OSC mode. default value :155M52	Enumeration Enumerated Values: 0 notApplicable 1 t155m52 2 t1gbe	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.9
oscWavelength Indicates the wavelength band of the OSC channel. UNITS:nm default value :1510	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.10
oscDataCommunication Configuration for enable or disable data communication network support of the OSC. default value :enabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.11
oscRxOpticalPower Received optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.12
oscTxOpticalPower Transmitted optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.4.1.1.13

goptTable

table

.1.3.6.1.4.1.42229.1.2.4.5.5.1 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk goptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::goptTable'

Copy

Represents the Generic Optical Section Interface (GOPT) MO

goptEntry row .1.3.6.1.4.1.42229.1.2.4.5.5.1.1

Entry of goptTable

Indexes

goptName

Column	Syntax	OID
goptName The name is defined to uniquely identify the gopt optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.1
goptAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.2
goptOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.3
goptAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.4
goptAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.5
goptSupportingRxPort Supporting Rx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.6
goptSupportingTxPort Supporting Tx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.7
goptRxOpticalPower Received optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.8
goptTxOpticalPower Transmitted optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.5.1.1.9

omsStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.5.9.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk omsStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::omsStatisticsTable'

Copy

NULL

omsStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.5.9.1.1

Entry of omsStatisticsTable

Indexes

omsName

Column	Syntax	OID
omsStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.5.9.1.1.1

oscStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.5.10.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oscStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oscStatisticsTable'

Copy

NULL

oscStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.5.10.1.1

Entry of oscStatisticsTable

Indexes

oscName

Column	Syntax	OID
oscStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.5.10.1.1.1

goptStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.5.11.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk goptStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::goptStatisticsTable'

Copy

NULL

goptStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.5.11.1.1

Entry of goptStatisticsTable

Indexes

goptName

Column	Syntax	OID
goptStatisticsEntryProtectionSwitchDuration Protection Switch Duration, corresponding to pm parameter PSD UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.11.1.1.1
goptStatisticsEntryProtectionSwitchCount Protection Switch Count, corresponding to pm parameter PSC UNITS:times	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.11.1.1.2
goptStatisticsEntryLossTx Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.11.1.1.3
goptStatisticsEntryLossRx Loss of Signal Seconds of Receive side, corresponding to pm parameter LOSS-RX UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.11.1.1.4
goptStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.5.11.1.1.5

ochTable

table

.1.3.6.1.4.1.42229.1.2.4.5.12.1 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ochTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ochTable'

Copy

Represents the Optical Channel (OCH) MO

ochEntry row .1.3.6.1.4.1.42229.1.2.4.5.12.1.1

Entry of ochTable

Indexes

ochName

Column	Syntax	OID
ochName The name is defined to uniquely identify the och optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.1
ochAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.2
ochOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.3
ochAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.4
ochAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.5
ochSupportingRxPort Supporting Rx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.6
ochSupportingTxPort Supporting Tx port for the optical interface.	OpticalCommonSupportingPort	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.7
ochParentEntity Supporting OMS interface. default value :none	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.8
ochFrequency Frequency of the channel with unit MHz. UNITS:MHz	Unsigned32 Constraints: range: 0-0 range: 191300000-196125000	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.9
ochWavelength Wavelength of the channel with unit nm. UNITS:nm	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.10
ochRxOpticalPower Received optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.11
ochTxOpticalPower Transmitted optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.12
ochWorkingMode och power control function mode Conditions:name(deref(../parent-entity)) = 'oms' default value :no-monitor	OpticalCommonChannelWorkingMode Type Values: 0 noMonitor 1 monitor 2 powerControl	.1.3.6.1.4.1.42229.1.2.4.5.12.1.1.13

mcTable

table

.1.3.6.1.4.1.42229.1.2.4.5.13.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk mcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::mcTable'

Copy

Represents the  Media Channel (MC) MO

mcEntry row .1.3.6.1.4.1.42229.1.2.4.5.13.1.1

Entry of mcTable

Indexes

mcName

Column	Syntax	OID
mcName The name is defined to uniquely identify the mc optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.1
mcAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.2
mcOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.3
mcAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.4
mcAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.5
mcParentEntity Specify supporting parent entity.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.6
mcLowerFrequency Minimal frequency of the mc with unit MHz. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.7
mcUpperFrequency Max frequency of the mc with unit MHz. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.8
mcCenterFrequency Center frequency of the media channel (mc) with unit MHz. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.9
mcSlotWidth Slot width of the media channel (mc) with unit MHz. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.10
mcServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.5.13.1.1.11

nmcTable

table

.1.3.6.1.4.1.42229.1.2.4.5.14.1 · 1 row entry · 20 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk nmcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::nmcTable'

Copy

Represents the Network Media Channel (NMC) MO

nmcEntry row .1.3.6.1.4.1.42229.1.2.4.5.14.1.1

Entry of nmcTable

Indexes

nmcName

Column	Syntax	OID
nmcName The name is defined to uniquely identify the nmc optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.1
nmcAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.2
nmcOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.3
nmcAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.4
nmcAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.5
nmcParentEntity Specify supporting parent entity.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.6
nmcCenterFrequency Center frequency of the network media channel (nmc) with unit MHz. UNITS:MHz	Unsigned32 Constraints: range: 184600000-196150000	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.7
nmcWidth Network media channel frequency width with unit MHz. UNITS:MHz	Unsigned32 Constraints: range: 15000-100000	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.8
nmcActualCenterFrequency Actual center frequency of the network media channel (nmc) with unit MHz. default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.9
nmcActualWidth Actual network media channel frequency width with unit MHz. default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.10
nmcActualPsd Actual input power spectral density expressed in nanowatts per megahertz, nW/GHz. default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.11
nmcRxOpticalPower Received optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.12
nmcTxOpticalPower Transmitted optical power default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.13
nmcManagedBy Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. default value :user	Enumeration Enumerated Values: 1 system 2 user	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.14
nmcActualOutputPsd Actual output power spectral density expressed in nanowatts per megahertz, nW/GHz. default value :not-available	CoriantTypesActualPsd	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.15
nmcInputPsdMax the maximum valid input signal psd Conditions:../../../roadm-target-power-mode = 'psd' default value :not-available	NmcNmcPsd	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.16
nmcInputPsdMin the minimum valid input signal psd Conditions:../../../roadm-target-power-mode = 'psd' default value :not-available	NmcNmcPsd	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.17
nmcServiceLabel Path/service name of cross-connection related facility. default value :	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.18
nmcInputPowerMax the maximum valid input signal power Conditions:../../../roadm-target-power-mode = 'power' default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.19
nmcInputPowerMin the minimum valid input signal power Conditions:../../../roadm-target-power-mode = 'power' default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.14.1.1.20

nmcInputTable

table

.1.3.6.1.4.1.42229.1.2.4.5.16.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk nmcInputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::nmcInputTable'

Copy

NULL

nmcInputEntry row .1.3.6.1.4.1.42229.1.2.4.5.16.1.1

Entry of nmcInputTable

Indexes

nmcName

Column	Syntax	OID
nmcInputInputChannelAttenuationControlMode Specify attenuation control mode of the channel. default value :not-applicable	OpticalCommonAttControlMode Type Values: 0 notApplicable 1 auto 2 manual 3 gainloss 4 off 5 power	.1.3.6.1.4.1.42229.1.2.4.5.16.1.1.1
nmcInputActualAttenuation Actually setting attenuation. UNITS:dB default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.16.1.1.2
nmcInputTargetAttenuation Actually setting attenuation. UNITS:dB default value :max	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.16.1.1.3

nmcOutputTable

table

.1.3.6.1.4.1.42229.1.2.4.5.17.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk nmcOutputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::nmcOutputTable'

Copy

NULL

nmcOutputEntry row .1.3.6.1.4.1.42229.1.2.4.5.17.1.1

Entry of nmcOutputTable

Indexes

nmcName

Column	Syntax	OID
nmcOutputOutputChannelAttenuationControlMode Specify attenuation control mode of the channel. default value :not-applicable	OpticalCommonAttControlMode Type Values: 0 notApplicable 1 auto 2 manual 3 gainloss 4 off 5 power	.1.3.6.1.4.1.42229.1.2.4.5.17.1.1.1
nmcOutputActualAttenuation Actually setting attenuation. UNITS:dB default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.17.1.1.2
nmcOutputTargetAttenuation Actually setting attenuation. UNITS:dB default value :max	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.17.1.1.3

nmcStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.5.18.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk nmcStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::nmcStatisticsTable'

Copy

NULL

nmcStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.5.18.1.1

Entry of nmcStatisticsTable

Indexes

nmcName

Column	Syntax	OID
nmcStatisticsEntryLossTx Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.18.1.1.1
nmcStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.5.18.1.1.2

otsStatisticsTable

table

.1.3.6.1.4.1.42229.1.2.4.5.19.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk otsStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::otsStatisticsTable'

Copy

NULL

otsStatisticsEntry row .1.3.6.1.4.1.42229.1.2.4.5.19.1.1

Entry of otsStatisticsTable

Indexes

otsName

Column	Syntax	OID
otsStatisticsEntryLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.4.5.19.1.1.1

ochInputTable

table

.1.3.6.1.4.1.42229.1.2.4.5.21.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ochInputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ochInputTable'

Copy

NULL

ochInputEntry row .1.3.6.1.4.1.42229.1.2.4.5.21.1.1

Entry of ochInputTable

Indexes

ochName

Column	Syntax	OID
ochInputInputChannelAttenuationControlMode Specify attenuation control mode of the channel. default value :not-applicable	OpticalCommonAttControlMode Type Values: 0 notApplicable 1 auto 2 manual 3 gainloss 4 off 5 power	.1.3.6.1.4.1.42229.1.2.4.5.21.1.1.1
ochInputActualAttenuation Actually setting attenuation. UNITS:dB default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.21.1.1.2
ochInputTargetAttenuation Actually setting attenuation. UNITS:dB default value :6	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.21.1.1.3

ochOutputTable

table

.1.3.6.1.4.1.42229.1.2.4.5.22.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ochOutputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ochOutputTable'

Copy

NULL

ochOutputEntry row .1.3.6.1.4.1.42229.1.2.4.5.22.1.1

Entry of ochOutputTable

Indexes

ochName

Column	Syntax	OID
ochOutputOutputChannelAttenuationControlMode Specify attenuation control mode of the channel. default value :not-applicable	OpticalCommonAttControlMode Type Values: 0 notApplicable 1 auto 2 manual 3 gainloss 4 off 5 power	.1.3.6.1.4.1.42229.1.2.4.5.22.1.1.1
ochOutputActualAttenuation Actually setting attenuation. UNITS:dB default value :not-available	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.22.1.1.2
ochOutputTargetAttenuation Actually setting attenuation. UNITS:dB default value :6	OctetString	.1.3.6.1.4.1.42229.1.2.4.5.22.1.1.3

oCRSTable

table

.1.3.6.1.4.1.42229.1.2.4.7.1 · 1 row entry · 9 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oCRSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oCRSTable'

Copy

Cross connection table.

oCRSEntry row .1.3.6.1.4.1.42229.1.2.4.7.1.1

Entry of oCRSTable

Indexes

oCRSSrcIf oCRSDstIf

Column	Syntax	OID
oCRSSrcIf Source tp of cross connection.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.7.1.1.1
oCRSDstIf Destination tp of optical cross connection.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.7.1.1.2
oCRSOpticalConnectionType Indicates the cross connection type. default value :one-way	Enumeration Enumerated Values: 1 twoWay 2 oneWay	.1.3.6.1.4.1.42229.1.2.4.7.1.1.3
oCRSTargetPsdDst Destination interface power spectral density expressed in nanowatts per megahertz, nW/GHz. These units allow the value to often be greater than 1.0. It also avoids dealing with zero values for 0dBm. For example, a 40…	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.4.7.1.1.4
oCRSTargetPsdSrc Source interface power spectral density expressed in nanowatts per gigahertz, nW/GHz. These units allow the value to often be greater than 1.0. It also avoids dealing with zero values for 0dBm. For example, a 40GHz w…	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.4.7.1.1.5
oCRSServiceLabel Path/service name of cross-connection.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.4.7.1.1.6
oCRSAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.4.7.1.1.7
oCRSTargetOutputPowerDst The destination interface target power Conditions:../../roadm-target-power-mode = 'power'	CoriantTypesOpticalPowerPrecision2	.1.3.6.1.4.1.42229.1.2.4.7.1.1.8
oCRSTargetOutputPowerSrc The source interface target power Conditions:../../roadm-target-power-mode = 'power'	CoriantTypesOpticalPowerPrecision2	.1.3.6.1.4.1.42229.1.2.4.7.1.1.9

internalLinkTable

table

.1.3.6.1.4.1.42229.1.2.4.8.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk internalLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::internalLinkTable'

Copy

NULL

internalLinkEntry row .1.3.6.1.4.1.42229.1.2.4.8.1.1

Entry of internalLinkTable

Indexes

internalLinkName internalLinkSrcPort internalLinkDstPort

Column	Syntax	OID
internalLinkName NULL	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.42229.1.2.4.8.1.1.1
internalLinkSrcPort NULL	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.8.1.1.2
internalLinkDstPort NULL	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.8.1.1.3

degreeTable

table

.1.3.6.1.4.1.42229.1.2.4.9.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk degreeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::degreeTable'

Copy

NULL

degreeEntry row .1.3.6.1.4.1.42229.1.2.4.9.1.1

Entry of degreeTable

Indexes

degreeNumber

Column	Syntax	OID
degreeNumber NULL	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.9.1.1.1
degreeMaxChannels maximum number of DWDM channels	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.9.1.1.2
degreeGroupStatus The group status for ROADM	Bits Enumerated Values: 0 none 1 failed 2 moduleMismatch 3 topoFailed 4 topoMismatch 5 notPresent 6 autoLaserShutdown 7 idle 8 busy 9 initializing 10 unknown	.1.3.6.1.4.1.42229.1.2.4.9.1.1.3

modulesTable

table

.1.3.6.1.4.1.42229.1.2.4.10.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk modulesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::modulesTable'

Copy

list for Cards associated with a degree

modulesEntry row .1.3.6.1.4.1.42229.1.2.4.10.1.1

Entry of modulesTable

Indexes

degreeNumber sharedRiskGroupSrgNumber modulesIndex

Column	Syntax	OID
modulesIndex NULL	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.10.1.1.1
modulesSupportedCard NULL	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.10.1.1.2

connectionPortsTable

table

.1.3.6.1.4.1.42229.1.2.4.11.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk connectionPortsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::connectionPortsTable'

Copy

Port associated with degree: One if bi-directional; two if uni-directional

connectionPortsEntry row .1.3.6.1.4.1.42229.1.2.4.11.1.1

Entry of connectionPortsTable

Indexes

degreeNumber connectionPortsIndex

Column	Syntax	OID
connectionPortsIndex NULL	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.11.1.1.1
connectionPortsSupportedPort NULL	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.11.1.1.2

associatedOtdrPortTable

table

.1.3.6.1.4.1.42229.1.2.4.12.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk associatedOtdrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::associatedOtdrPortTable'

Copy

otdr port associated with degree.

associatedOtdrPortEntry row .1.3.6.1.4.1.42229.1.2.4.12.1.1

Entry of associatedOtdrPortTable

Indexes

degreeNumber

Column	Syntax	OID
associatedOtdrPortSupportedPort NULL	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.4.12.1.1.1

mcCapabilitiesTable

table

.1.3.6.1.4.1.42229.1.2.4.13.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk mcCapabilitiesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::mcCapabilitiesTable'

Copy

Capabilities of the media channel on a degree or SRG.  This is used to validate mc-ttp provisioning on degrees and SRGs.

mcCapabilitiesEntry row .1.3.6.1.4.1.42229.1.2.4.13.1.1

Entry of mcCapabilitiesTable

Indexes

degreeNumber sharedRiskGroupSrgNumber

Column	Syntax	OID
mcCapabilitiesSlotWidthGranularity Width of a slot measured in MHz. default value :50000	CoriantTypesFreqRoadm	.1.3.6.1.4.1.42229.1.2.4.13.1.1.1
mcCapabilitiesCenterFreqGranularity Granularity of allowed center frequencies. The base frequency for this computation is 193100000 MHz (G.694.1) default value :50000	CoriantTypesFreqRoadm	.1.3.6.1.4.1.42229.1.2.4.13.1.1.2
mcCapabilitiesMinSlots Minimum number of slots permitted to be joined together to form a media channel. Must be less than or equal to the max-slots default value :1	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.13.1.1.3
mcCapabilitiesMaxSlots Maximum number of slots permitted to be joined together to form a media channel. Must be greater than or equal to the min-slots default value :1	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.13.1.1.4

sharedRiskGroupTable

table

.1.3.6.1.4.1.42229.1.2.4.14.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk sharedRiskGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::sharedRiskGroupTable'

Copy

NULL

sharedRiskGroupEntry row .1.3.6.1.4.1.42229.1.2.4.14.1.1

Entry of sharedRiskGroupTable

Indexes

sharedRiskGroupSrgNumber

Column	Syntax	OID
sharedRiskGroupMaxAddDropPorts The max number of ports available for a given srg	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.14.1.1.1
sharedRiskGroupCurrentProvisionedAddDropPorts The number of ports currently provisioned for a given srg.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.14.1.1.2
sharedRiskGroupSrgNumber NULL	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.4.14.1.1.3
sharedRiskGroupWavelengthDuplication Whether the SRG can handle duplicate wavelengths and if so to what extent. default value :one-per-srg	Enumeration Enumerated Values: 1 onePerSrg 2 onePerDegree	.1.3.6.1.4.1.42229.1.2.4.14.1.1.4
sharedRiskGroupGridCapability The srg grid capability selected by request default value :colorless	Enumeration Enumerated Values: 1 colorless 2 colored	.1.3.6.1.4.1.42229.1.2.4.14.1.1.5
sharedRiskGroupGroupStatus The group status for ROADM	Bits Enumerated Values: 0 none 1 failed 2 moduleMismatch 3 topoFailed 4 topoMismatch 5 notPresent 6 autoLaserShutdown 7 idle 8 busy 9 initializing 10 unknown	.1.3.6.1.4.1.42229.1.2.4.14.1.1.6

pmPointTable

table

.1.3.6.1.4.1.42229.1.2.5.2.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pmPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pmPointTable'

Copy

The list of performance monitoring points associated with the monitored management object.

pmPointEntry row .1.3.6.1.4.1.42229.1.2.5.2.1.1

Entry of pmPointTable

Indexes

pmPointPmEntity pmPointPmpType pmPointPmTimePeriod

Column	Syntax	OID
pmPointPmEntity Specifies the management object instance the performance monitoring data are collected for.	CoriantPmtypesPmInstance	.1.3.6.1.4.1.42229.1.2.5.2.1.1.1
pmPointPmpType Specifies the type of performance monitoring point.	CoriantPmtypesPmpType Type Values: 0 notApplicable 1 oduNendEgress 2 oduNendIngress 3 otuNendIngress 4 delayMeasurementOdu 5 coherentOpticalInterface 6 opticalPower 7 loss 8 ethernetNendIngress 9 ethernetNendEgress 10 fec 11 fcNendIngress 12 sonetSNendIngress 13 sdhRsNendIngress 14 sonetSNendEgress 15 sdhRsNendEgress 16 shelfTemperature 17 equipmentTemperature 18 opticalPowerLane 19 protectionSwitch 20 lossTxrx 21 opticalPowerIngress 22 opticalPowerEgress 23 oduEncryption 24 pilotTone 25 lossTx 26 returnLoss 27 pcsNendIngress 28 macNendIngress 29 macNendEgress 30 ethernetErrorIngress 31 ethernetErrorEgress 100 all	.1.3.6.1.4.1.42229.1.2.5.2.1.1.2
pmPointPmTimePeriod Specifies the time-period increments during which PM data are collected.	CoriantTypesManagementTimePeriod Type Values: 0 notApplicable 1 t15min 2 t24h 4 all 5 t1min 6 t1h	.1.3.6.1.4.1.42229.1.2.5.2.1.1.3
pmPointSupervisionSwitch Enable/disable counting for all performance monitoring parameters of the given PMP. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.5.2.1.1.4
pmPointThresholdingSwitch Enable/disable the TCA processing and reporting for all performance monitoring parameters of the given PM point. default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.5.2.1.1.5
pmPointHistoryRecording Enable/disable the history data storage for all performance monitoring parameters of the given PM point. default value :enabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.5.2.1.1.6

pmDataCurrentTable

table

.1.3.6.1.4.1.42229.1.2.5.3.2 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pmDataCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pmDataCurrentTable'

Copy

Defines the get-pm output of record performance data for current time

pmDataCurrentEntry row .1.3.6.1.4.1.42229.1.2.5.3.2.1

Entry of pmDataCurrentTable

Indexes

pmPointPmEntity pmPointPmpType pmPointPmTimePeriod pmDataCurrentPmParameter

Column	Syntax	OID
pmDataCurrentMonitoringDateTime Monitoring data and time'	OctetString	.1.3.6.1.4.1.42229.1.2.5.3.2.1.1
pmDataCurrentPmParameter Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.	CoriantPmtypesPmParameter Type Values: 0 all 1 eb 2 es 3 ses 4 uas 5 delay 6 delayMax 7 delayMin 8 dgd 9 dgdMax 10 dgdMin 11 cd 12 cdMax 13 cdMin 14 osnr 15 osnrMax 16 osnrMin 17 qFactor 18 qFactorMax 19 qFactorMin 20 opr 21 oprMax 22 oprMin 23 loss 24 se 25 dropevents 26 octets 27 pkts 28 broadcastpkts 29 multicastpkts 30 crcalignerrors 31 undersizepkts 32 oversizepkts 33 fragments 34 jabbers 35 pkts64octets 36 pkts65to127octets 37 pkts128to255octets 38 pkts256to511octets 39 pkts512to1023octets 40 pkts1024to1518octets 41 utilization 42 utilizationMax 43 utilizationMin 44 beFec 45 ubeFec 46 berFec 47 berFecMax 48 berFecMin 49 opt 50 optMax 51 optMin 52 pdl 53 pdlMax 54 pdlMin 55 oft 56 oftMax 57 oftMin 58 ofr 59 ofrMax 60 ofrMin 61 bbe 65 ofs 66 cv 67 sefs 68 oprLaneHigh 69 oprLaneHighMax 70 oprLaneHighMin 71 oprLaneLow 72 oprLaneLowMax 73 oprLaneLowMin 74 oprTotal 75 oprTotalMax 76 oprTotalMin 77 optLaneHigh 78 optLaneHighMax 79 optLaneHighMin 80 optLaneLow 81 optLaneLowMax 82 optLaneLowMin 83 optTotal 84 optTotalMax 85 optTotalMin 86 tmodule 87 tinlet 88 toutlet 89 tmoduleMax 90 tmoduleMin 91 tinletMax 92 tinletMin 93 toutletMax 94 toutletMin 95 berPostFec 96 berPostFecMax 97 berPostFecMin 98 psd 99 psc 100 lossTx 101 lossRx 102 encryptionFailRx 103 ptfs 104 orl 105 orlMax 106 orlMin 107 orlAvg 108 delayAvg 109 dgdAvg 110 cdAvg 111 osnrAvg 112 qFactorAvg 113 oprAvg 114 optAvg 115 berFecAvg 116 berPostFecAvg 117 pdlAvg 118 oftAvg 119 ofrAvg 120 oprLaneHighAvg 121 oprLaneLowAvg 122 oprTotalAvg 123 optLaneHighAvg 124 optLaneLowAvg 125 optTotalAvg 126 tmoduleAvg 127 tinletAvg 128 toutletAvg 129 utilizationAvg 130 delayFrame 131 delayFrameMax 132 delayFrameMin 133 delayFrameAvg 134 cbeFec 135 feb 136 iae 137 biae 138 be 139 pktserr 140 bber 141 bberMax 142 bberMin 143 bberAvg 144 sesr 145 sesrMax 146 sesrMin 147 sesrAvg 148 sop 149 sopMax 150 sopMin 151 sopAvg	.1.3.6.1.4.1.42229.1.2.5.3.2.1.2
pmDataCurrentPmValue PM counter or gauge value of the PM parameter.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.42229.1.2.5.3.2.1.3
pmDataCurrentPmUnit Unit of PM value.	CoriantCommonpmUnitOfValue Type Values: 0 notApplicable 1 dbm 2 microseconds 3 ps 4 psNm 5 db 6 seconds 7 packets 8 events 9 octets 10 bits 11 bitsS 12 blocks 13 times 14 percentage 15 bitRatio 16 mhz 17 celsius 18 frames 19 radsS	.1.3.6.1.4.1.42229.1.2.5.3.2.1.4
pmDataCurrentValidity Indicates whether or not a performance monitoring value is valid.	CoriantPmtypesValidityType Type Values: 1 complete 2 partial 3 notAvailable	.1.3.6.1.4.1.42229.1.2.5.3.2.1.5

pmDataLatestHistoryTable

table

.1.3.6.1.4.1.42229.1.2.5.3.3 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pmDataLatestHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pmDataLatestHistoryTable'

Copy

Defines the get-pm output of record performance data for latest history time

pmDataLatestHistoryEntry row .1.3.6.1.4.1.42229.1.2.5.3.3.1

Entry of pmDataLatestHistoryTable

Indexes

pmPointPmEntity pmPointPmpType pmPointPmTimePeriod pmDataLatestHistoryPmParameter

Column	Syntax	OID
pmDataLatestHistoryMonitoringDateTime Monitoring data and time'	OctetString	.1.3.6.1.4.1.42229.1.2.5.3.3.1.1
pmDataLatestHistoryPmParameter Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.	CoriantPmtypesPmParameter Type Values: 0 all 1 eb 2 es 3 ses 4 uas 5 delay 6 delayMax 7 delayMin 8 dgd 9 dgdMax 10 dgdMin 11 cd 12 cdMax 13 cdMin 14 osnr 15 osnrMax 16 osnrMin 17 qFactor 18 qFactorMax 19 qFactorMin 20 opr 21 oprMax 22 oprMin 23 loss 24 se 25 dropevents 26 octets 27 pkts 28 broadcastpkts 29 multicastpkts 30 crcalignerrors 31 undersizepkts 32 oversizepkts 33 fragments 34 jabbers 35 pkts64octets 36 pkts65to127octets 37 pkts128to255octets 38 pkts256to511octets 39 pkts512to1023octets 40 pkts1024to1518octets 41 utilization 42 utilizationMax 43 utilizationMin 44 beFec 45 ubeFec 46 berFec 47 berFecMax 48 berFecMin 49 opt 50 optMax 51 optMin 52 pdl 53 pdlMax 54 pdlMin 55 oft 56 oftMax 57 oftMin 58 ofr 59 ofrMax 60 ofrMin 61 bbe 65 ofs 66 cv 67 sefs 68 oprLaneHigh 69 oprLaneHighMax 70 oprLaneHighMin 71 oprLaneLow 72 oprLaneLowMax 73 oprLaneLowMin 74 oprTotal 75 oprTotalMax 76 oprTotalMin 77 optLaneHigh 78 optLaneHighMax 79 optLaneHighMin 80 optLaneLow 81 optLaneLowMax 82 optLaneLowMin 83 optTotal 84 optTotalMax 85 optTotalMin 86 tmodule 87 tinlet 88 toutlet 89 tmoduleMax 90 tmoduleMin 91 tinletMax 92 tinletMin 93 toutletMax 94 toutletMin 95 berPostFec 96 berPostFecMax 97 berPostFecMin 98 psd 99 psc 100 lossTx 101 lossRx 102 encryptionFailRx 103 ptfs 104 orl 105 orlMax 106 orlMin 107 orlAvg 108 delayAvg 109 dgdAvg 110 cdAvg 111 osnrAvg 112 qFactorAvg 113 oprAvg 114 optAvg 115 berFecAvg 116 berPostFecAvg 117 pdlAvg 118 oftAvg 119 ofrAvg 120 oprLaneHighAvg 121 oprLaneLowAvg 122 oprTotalAvg 123 optLaneHighAvg 124 optLaneLowAvg 125 optTotalAvg 126 tmoduleAvg 127 tinletAvg 128 toutletAvg 129 utilizationAvg 130 delayFrame 131 delayFrameMax 132 delayFrameMin 133 delayFrameAvg 134 cbeFec 135 feb 136 iae 137 biae 138 be 139 pktserr 140 bber 141 bberMax 142 bberMin 143 bberAvg 144 sesr 145 sesrMax 146 sesrMin 147 sesrAvg 148 sop 149 sopMax 150 sopMin 151 sopAvg	.1.3.6.1.4.1.42229.1.2.5.3.3.1.2
pmDataLatestHistoryPmValue PM counter or gauge value of the PM parameter.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.42229.1.2.5.3.3.1.3
pmDataLatestHistoryPmUnit Unit of PM value.	CoriantCommonpmUnitOfValue Type Values: 0 notApplicable 1 dbm 2 microseconds 3 ps 4 psNm 5 db 6 seconds 7 packets 8 events 9 octets 10 bits 11 bitsS 12 blocks 13 times 14 percentage 15 bitRatio 16 mhz 17 celsius 18 frames 19 radsS	.1.3.6.1.4.1.42229.1.2.5.3.3.1.4
pmDataLatestHistoryValidity Indicates whether or not a performance monitoring value is valid.	CoriantPmtypesValidityType Type Values: 1 complete 2 partial 3 notAvailable	.1.3.6.1.4.1.42229.1.2.5.3.3.1.5

pmDataHistoryTable

table

.1.3.6.1.4.1.42229.1.2.5.3.4 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pmDataHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pmDataHistoryTable'

Copy

Defines the get-pm output of record performance data for history

pmDataHistoryEntry row .1.3.6.1.4.1.42229.1.2.5.3.4.1

Entry of pmDataHistoryTable

Indexes

pmPointPmEntity pmPointPmpType pmPointPmTimePeriod pmDataHistoryRecordIndex pmDataHistoryPmParameter

Column	Syntax	OID
pmDataHistoryRecordIndex Index of PM data records.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.5.3.4.1.1
pmDataHistoryMonitoringDateTime Monitoring data and time'	OctetString	.1.3.6.1.4.1.42229.1.2.5.3.4.1.2
pmDataHistoryPmParameter Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.	CoriantPmtypesPmParameter Type Values: 0 all 1 eb 2 es 3 ses 4 uas 5 delay 6 delayMax 7 delayMin 8 dgd 9 dgdMax 10 dgdMin 11 cd 12 cdMax 13 cdMin 14 osnr 15 osnrMax 16 osnrMin 17 qFactor 18 qFactorMax 19 qFactorMin 20 opr 21 oprMax 22 oprMin 23 loss 24 se 25 dropevents 26 octets 27 pkts 28 broadcastpkts 29 multicastpkts 30 crcalignerrors 31 undersizepkts 32 oversizepkts 33 fragments 34 jabbers 35 pkts64octets 36 pkts65to127octets 37 pkts128to255octets 38 pkts256to511octets 39 pkts512to1023octets 40 pkts1024to1518octets 41 utilization 42 utilizationMax 43 utilizationMin 44 beFec 45 ubeFec 46 berFec 47 berFecMax 48 berFecMin 49 opt 50 optMax 51 optMin 52 pdl 53 pdlMax 54 pdlMin 55 oft 56 oftMax 57 oftMin 58 ofr 59 ofrMax 60 ofrMin 61 bbe 65 ofs 66 cv 67 sefs 68 oprLaneHigh 69 oprLaneHighMax 70 oprLaneHighMin 71 oprLaneLow 72 oprLaneLowMax 73 oprLaneLowMin 74 oprTotal 75 oprTotalMax 76 oprTotalMin 77 optLaneHigh 78 optLaneHighMax 79 optLaneHighMin 80 optLaneLow 81 optLaneLowMax 82 optLaneLowMin 83 optTotal 84 optTotalMax 85 optTotalMin 86 tmodule 87 tinlet 88 toutlet 89 tmoduleMax 90 tmoduleMin 91 tinletMax 92 tinletMin 93 toutletMax 94 toutletMin 95 berPostFec 96 berPostFecMax 97 berPostFecMin 98 psd 99 psc 100 lossTx 101 lossRx 102 encryptionFailRx 103 ptfs 104 orl 105 orlMax 106 orlMin 107 orlAvg 108 delayAvg 109 dgdAvg 110 cdAvg 111 osnrAvg 112 qFactorAvg 113 oprAvg 114 optAvg 115 berFecAvg 116 berPostFecAvg 117 pdlAvg 118 oftAvg 119 ofrAvg 120 oprLaneHighAvg 121 oprLaneLowAvg 122 oprTotalAvg 123 optLaneHighAvg 124 optLaneLowAvg 125 optTotalAvg 126 tmoduleAvg 127 tinletAvg 128 toutletAvg 129 utilizationAvg 130 delayFrame 131 delayFrameMax 132 delayFrameMin 133 delayFrameAvg 134 cbeFec 135 feb 136 iae 137 biae 138 be 139 pktserr 140 bber 141 bberMax 142 bberMin 143 bberAvg 144 sesr 145 sesrMax 146 sesrMin 147 sesrAvg 148 sop 149 sopMax 150 sopMin 151 sopAvg	.1.3.6.1.4.1.42229.1.2.5.3.4.1.3
pmDataHistoryPmValue PM counter or gauge value of the PM parameter.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.42229.1.2.5.3.4.1.4
pmDataHistoryPmUnit Unit of PM value.	CoriantCommonpmUnitOfValue Type Values: 0 notApplicable 1 dbm 2 microseconds 3 ps 4 psNm 5 db 6 seconds 7 packets 8 events 9 octets 10 bits 11 bitsS 12 blocks 13 times 14 percentage 15 bitRatio 16 mhz 17 celsius 18 frames 19 radsS	.1.3.6.1.4.1.42229.1.2.5.3.4.1.5
pmDataHistoryValidity Indicates whether or not a performance monitoring value is valid.	CoriantPmtypesValidityType Type Values: 1 complete 2 partial 3 notAvailable	.1.3.6.1.4.1.42229.1.2.5.3.4.1.6

pmThresholdsValueTable

table

.1.3.6.1.4.1.42229.1.2.5.4.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pmThresholdsValueTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pmThresholdsValueTable'

Copy

The list of entries of performance monitoring threshold value.

pmThresholdsValueEntry row .1.3.6.1.4.1.42229.1.2.5.4.1.1

Entry of pmThresholdsValueTable

Indexes

pmPointPmEntity pmPointPmpType pmPointPmTimePeriod pmThresholdsValuePmParameter

Column	Syntax	OID
pmThresholdsValuePmParameter Performance Monitoring parameter, which could be a counter or gauge parameter, the later support current, max and min values.	CoriantPmtypesPmParameter Type Values: 0 all 1 eb 2 es 3 ses 4 uas 5 delay 6 delayMax 7 delayMin 8 dgd 9 dgdMax 10 dgdMin 11 cd 12 cdMax 13 cdMin 14 osnr 15 osnrMax 16 osnrMin 17 qFactor 18 qFactorMax 19 qFactorMin 20 opr 21 oprMax 22 oprMin 23 loss 24 se 25 dropevents 26 octets 27 pkts 28 broadcastpkts 29 multicastpkts 30 crcalignerrors 31 undersizepkts 32 oversizepkts 33 fragments 34 jabbers 35 pkts64octets 36 pkts65to127octets 37 pkts128to255octets 38 pkts256to511octets 39 pkts512to1023octets 40 pkts1024to1518octets 41 utilization 42 utilizationMax 43 utilizationMin 44 beFec 45 ubeFec 46 berFec 47 berFecMax 48 berFecMin 49 opt 50 optMax 51 optMin 52 pdl 53 pdlMax 54 pdlMin 55 oft 56 oftMax 57 oftMin 58 ofr 59 ofrMax 60 ofrMin 61 bbe 65 ofs 66 cv 67 sefs 68 oprLaneHigh 69 oprLaneHighMax 70 oprLaneHighMin 71 oprLaneLow 72 oprLaneLowMax 73 oprLaneLowMin 74 oprTotal 75 oprTotalMax 76 oprTotalMin 77 optLaneHigh 78 optLaneHighMax 79 optLaneHighMin 80 optLaneLow 81 optLaneLowMax 82 optLaneLowMin 83 optTotal 84 optTotalMax 85 optTotalMin 86 tmodule 87 tinlet 88 toutlet 89 tmoduleMax 90 tmoduleMin 91 tinletMax 92 tinletMin 93 toutletMax 94 toutletMin 95 berPostFec 96 berPostFecMax 97 berPostFecMin 98 psd 99 psc 100 lossTx 101 lossRx 102 encryptionFailRx 103 ptfs 104 orl 105 orlMax 106 orlMin 107 orlAvg 108 delayAvg 109 dgdAvg 110 cdAvg 111 osnrAvg 112 qFactorAvg 113 oprAvg 114 optAvg 115 berFecAvg 116 berPostFecAvg 117 pdlAvg 118 oftAvg 119 ofrAvg 120 oprLaneHighAvg 121 oprLaneLowAvg 122 oprTotalAvg 123 optLaneHighAvg 124 optLaneLowAvg 125 optTotalAvg 126 tmoduleAvg 127 tinletAvg 128 toutletAvg 129 utilizationAvg 130 delayFrame 131 delayFrameMax 132 delayFrameMin 133 delayFrameAvg 134 cbeFec 135 feb 136 iae 137 biae 138 be 139 pktserr 140 bber 141 bberMax 142 bberMin 143 bberAvg 144 sesr 145 sesrMax 146 sesrMin 147 sesrAvg 148 sop 149 sopMax 150 sopMin 151 sopAvg	.1.3.6.1.4.1.42229.1.2.5.4.1.1.1
pmThresholdsValuePmHighThreshold Specifies the desired high threshold value of the selected performance monitoring parameter.	CoriantCommonpmThresholdValue Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.5.4.1.1.2
pmThresholdsValuePmLowThreshold Specifies the desired low threshold value of the selected performance monitoring parameter.	CoriantCommonpmThresholdValue Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.5.4.1.1.3
pmThresholdsValuePmUnit The unit of the performance monitoring value.	CoriantCommonpmUnitOfValue Type Values: 0 notApplicable 1 dbm 2 microseconds 3 ps 4 psNm 5 db 6 seconds 7 packets 8 events 9 octets 10 bits 11 bitsS 12 blocks 13 times 14 percentage 15 bitRatio 16 mhz 17 celsius 18 frames 19 radsS	.1.3.6.1.4.1.42229.1.2.5.4.1.1.4

interfaceTable

table

.1.3.6.1.4.1.42229.1.2.6.2.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk interfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::interfaceTable'

Copy

The list of configured interfaces on the device.

interfaceEntry row .1.3.6.1.4.1.42229.1.2.6.2.1.1

Entry of interfaceTable

Indexes

interfaceIfName

Column	Syntax	OID
interfaceIfName The name of the interface.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.2.1.1.1
interfaceIfDescription A textual description of the interface.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.6.2.1.1.2
interfaceIfType The type of the interface. Refer to http://www.iana.org/assignments/smi-numbers	Enumeration Enumerated Values: 0 other 1 ethernetcsmacd 2 ppp 3 softwareloopback 4 lapd 5 oscx	.1.3.6.1.4.1.42229.1.2.6.2.1.1.3
interfaceAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.6.2.1.1.4
interfaceOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.6.2.1.1.5
interfaceAvailStatus Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' ' per yang definition. …	Bits Enumerated Values: 0 none 1 failed 2 mismatch 3 lowerLayerDown 4 notPresent 5 shutdown 6 degraded 7 idle 8 busy 9 hibernation 10 inTest 11 loopback 12 softwareUpgrade 13 initializing 14 unknown 15 incomplete 16 laserSafetyShutoff 17 measuring 18 firmwareLoading 19 connected 20 communicationFailed	.1.3.6.1.4.1.42229.1.2.6.2.1.1.6
interfaceAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.6.2.1.1.7

ethernetTable

table

.1.3.6.1.4.1.42229.1.2.6.3.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ethernetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ethernetTable'

Copy

The Ethernet attributes of an Ethernet interface.

ethernetEntry row .1.3.6.1.4.1.42229.1.2.6.3.1.1

Entry of ethernetTable

Indexes

interfaceIfName

Column	Syntax	OID
ethernetAutoNegotiation Auto negotiation mode. default value :enabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.6.3.1.1.1
ethernetDuplexMode Duplex Mode; only valid if auto negotiation is disabled. default value :full	CoriantTypesDuplexMode Type Values: 0 na 1 full 2 half	.1.3.6.1.4.1.42229.1.2.6.3.1.1.2
ethernetOperationalDuplexMode Operational duplex mode. default value :NA	CoriantTypesDuplexMode Type Values: 0 na 1 full 2 half	.1.3.6.1.4.1.42229.1.2.6.3.1.1.3
ethernetRate Required Ethernet Rate; only valid if auto negotiation is disabled. default value :max-rate	CoriantTypesEthernetRate Type Values: 0 na 1 t10 2 t100 3 t1000 4 maxRate	.1.3.6.1.4.1.42229.1.2.6.3.1.1.4
ethernetOperationalEthernetRate Operation ethernet rate. default value :NA	CoriantTypesEthernetRate Type Values: 0 na 1 t10 2 t100 3 t1000 4 maxRate	.1.3.6.1.4.1.42229.1.2.6.3.1.1.5
ethernetFlowControl Specifies the type of flow control to be supported. default value :tx-rx	CoriantTypesFlowControl Type Values: 0 na 1 off 2 txRx 3 tx 4 rx	.1.3.6.1.4.1.42229.1.2.6.3.1.1.6
ethernetOperationalFlowControl Operational flow control. default value :NA	CoriantTypesFlowControl Type Values: 0 na 1 off 2 txRx 3 tx 4 rx	.1.3.6.1.4.1.42229.1.2.6.3.1.1.7
ethernetMacAddress MAC Address of the port. default value :00:00:00:00:00:00	IetfYangTypesMacAddress	.1.3.6.1.4.1.42229.1.2.6.3.1.1.8
ethernetAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.6.3.1.1.9
ethernetEthResourceRef Reference of the lower layer resource associated with this interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.3.1.1.10

pppTable

table

.1.3.6.1.4.1.42229.1.2.6.4.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pppTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pppTable'

Copy

NULL

pppEntry row .1.3.6.1.4.1.42229.1.2.6.4.1.1

Entry of pppTable

Indexes

interfaceIfName

Column	Syntax	OID
pppType Specifies the link type associated with the ppp.	Enumeration Enumerated Values: 1 gcc0	.1.3.6.1.4.1.42229.1.2.6.4.1.1.1
pppPfRef Reference of the ppp profile.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.4.1.1.2
pppResourceRef Reference of the lower layer resource associated with this interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.4.1.1.3
pppAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.6.4.1.1.4
pppPeerIpAddress The IP address on the peer node. default value :0.0.0.0	IetfInetTypesIpv4AddressNoZone	.1.3.6.1.4.1.42229.1.2.6.4.1.1.5

ipv4Table

table

.1.3.6.1.4.1.42229.1.2.6.5.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ipv4Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ipv4Table'

Copy

Parameters for the IPv4 address family.

ipv4Entry row .1.3.6.1.4.1.42229.1.2.6.5.1.1

Entry of ipv4Table

Indexes

interfaceIfName

Column	Syntax	OID
ipv4Forwarding Controls IPv4 packet forwarding of datagrams received by, but not addressed to, this interface. IPv4 routers forward datagrams. IPv4 hosts do not (except those source-routed via the host). …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.5.1.1.1
ipv4Mtu The size, in octets, of the largest IPv4 packet that the interface will send and receive. The server may restrict the allowed values for this leaf, depending on the interface's type. …	Unsigned32 Constraints: range: 68-65535	.1.3.6.1.4.1.42229.1.2.6.5.1.1.2
ipv4AddressAssignmentMethod IPv4 address assignment method. default value :static	Enumeration Enumerated Values: 1 static 2 dhcp	.1.3.6.1.4.1.42229.1.2.6.5.1.1.3
ipv4ProxyArp Proxy ARP switch on an ethernetCsmacd interface. Conditions:../../if-type = 'ethernetCsmacd' default value :false	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.5.1.1.4

ipAddressTable

table

.1.3.6.1.4.1.42229.1.2.6.6.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ipAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ipAddressTable'

Copy

The IP address on the interface.

ipAddressEntry row .1.3.6.1.4.1.42229.1.2.6.6.1.1

Entry of ipAddressTable

Indexes

interfaceIfName

Column	Syntax	OID
ipAddressIp The IP address on the interface.	IetfInetTypesIpv4AddressNoZone	.1.3.6.1.4.1.42229.1.2.6.6.1.1.1
ipAddressOrigin The origin of this address. default value :static	Enumeration Enumerated Values: 1 other 2 static 3 dhcp 4 linkLayer 5 random	.1.3.6.1.4.1.42229.1.2.6.6.1.1.2
ipAddressPrefixLength The length of the subnet prefix.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.6.1.1.3

ipUnnumberedTable

table

.1.3.6.1.4.1.42229.1.2.6.7.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ipUnnumberedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ipUnnumberedTable'

Copy

The IP unnumbered configurations.

ipUnnumberedEntry row .1.3.6.1.4.1.42229.1.2.6.7.1.1

Entry of ipUnnumberedTable

Indexes

interfaceIfName

Column	Syntax	OID
ipUnnumberedUnnumEnabled Indicates that the interface is unnumbered. By default the interface is numbered, i.e., expected to have an IP address configuration. default value :false	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.7.1.1.1
ipUnnumberedParentInterface Reference of the parent interface of the unnumbered interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.7.1.1.2

routingProtocolTable

table

.1.3.6.1.4.1.42229.1.2.6.9.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk routingProtocolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::routingProtocolTable'

Copy

Routing protocol instance.

routingProtocolEntry row .1.3.6.1.4.1.42229.1.2.6.9.1.1

Entry of routingProtocolTable

Indexes

routingProtocolRtpType routingProtocolRtpName

Column	Syntax	OID
routingProtocolRtpType The type of the routing protocol instance.	CoriantTypesRtpType Type Values: 1 direct 2 static 3 ospfv2 4 ebgp	.1.3.6.1.4.1.42229.1.2.6.9.1.1.1
routingProtocolRtpName The name of the routing protocol instance. For system-controlled instances this name is persistent, i.e., it SHOULD NOT change across reboots.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.9.1.1.2
routingProtocolDescription Textual description of the routing protocol instance.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.9.1.1.3

staticRouteTable

table

.1.3.6.1.4.1.42229.1.2.6.10.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk staticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::staticRouteTable'

Copy

A list of static routes.

staticRouteEntry row .1.3.6.1.4.1.42229.1.2.6.10.1.1

Entry of staticRouteTable

Indexes

routingProtocolRtpType routingProtocolRtpName staticRouteDestinationPrefix

Column	Syntax	OID
staticRouteDestinationPrefix IP destination prefix.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.10.1.1.1
staticRouteDescription Textual description of the static route.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.10.1.1.2
staticRouteAdvertised When set to YES, the static route is advertised in the routing protocol. For OSPF, the static route will be advertised as an AS external route, if OSPF is configured as an ASBR. default…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.10.1.1.3

ospfTable

table

.1.3.6.1.4.1.42229.1.2.6.12.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ospfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ospfTable'

Copy

OSPF protocol.

ospfEntry row .1.3.6.1.4.1.42229.1.2.6.12.1.1

Entry of ospfTable

Indexes

routingProtocolRtpType routingProtocolRtpName

Column	Syntax	OID
ospfRouterId OSPF Router ID.	IetfYangTypesDottedQuad	.1.3.6.1.4.1.42229.1.2.6.12.1.1.1
ospfDescription Textual description of the OSPF instance.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.12.1.1.2
ospfAsbr OSPF Autonomous System Boundary Router. default value :true	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.12.1.1.3
ospfAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.6.12.1.1.4
ospfOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.6.12.1.1.5
ospfAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.6.12.1.1.6

ospfAreaTable

table

.1.3.6.1.4.1.42229.1.2.6.13.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ospfAreaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ospfAreaTable'

Copy

Configuration of ospf area.

ospfAreaEntry row .1.3.6.1.4.1.42229.1.2.6.13.1.1

Entry of ospfAreaTable

Indexes

routingProtocolRtpType routingProtocolRtpName ospfAreaId

Column	Syntax	OID
ospfAreaId OSPF Router Area ID.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.13.1.1.1
ospfAreaAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.6.13.1.1.2
ospfAreaOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.6.13.1.1.3
ospfAreaAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.6.13.1.1.4
ospfAreaType OSPF Router Area Type. default value :normal	Enumeration Enumerated Values: 1 normal 2 stub	.1.3.6.1.4.1.42229.1.2.6.13.1.1.5

ospfInterfaceTable

table

.1.3.6.1.4.1.42229.1.2.6.14.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ospfInterfaceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ospfInterfaceTable'

Copy

Configuration of interface in an ospf area.

ospfInterfaceEntry row .1.3.6.1.4.1.42229.1.2.6.14.1.1

Entry of ospfInterfaceTable

Indexes

routingProtocolRtpType routingProtocolRtpName ospfAreaId ospfInterfaceOspfIfName

Column	Syntax	OID
ospfInterfaceOspfIfName Reference of the interface in OSPF area.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.14.1.1.1
ospfInterfaceOspfLinkpf Reference of the ospf link profile associated with the interface.	OctetString	.1.3.6.1.4.1.42229.1.2.6.14.1.1.2
ospfInterfaceOspfCost OSPF link cost.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.42229.1.2.6.14.1.1.3
ospfInterfaceOspfIfRouting Specifies if Routing is enabled and if so, if Routing is passive or active. ACTIVE - This link is advertised and routing messages are transported over this link. PASSIVE - This link is advertised, routing messages are n…	Enumeration Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.42229.1.2.6.14.1.1.4
ospfInterfaceOspfNetworkType OSPF Interface Network Types.	Enumeration Enumerated Values: 1 broadcast 2 pointToPoint 3 pointToMultipoint	.1.3.6.1.4.1.42229.1.2.6.14.1.1.5
ospfInterfaceDrPriority The local system's priority to become the designated router default value :1	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.14.1.1.6

ospfAdjacencyTable

table

.1.3.6.1.4.1.42229.1.2.6.15.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ospfAdjacencyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ospfAdjacencyTable'

Copy

attributes of OSPF adjacency.

ospfAdjacencyEntry row .1.3.6.1.4.1.42229.1.2.6.15.1.1

Entry of ospfAdjacencyTable

Indexes

routingProtocolRtpType routingProtocolRtpName ospfAreaId ospfInterfaceOspfIfName ospfAdjacencyOspfNeighborAddress

Column	Syntax	OID
ospfAdjacencyOspfNeighborAddress neighbor IP address of the OSPF adjacency.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.15.1.1.1
ospfAdjacencyNeighborRouterId OSPF neighbor Router ID.	IetfYangTypesDottedQuad	.1.3.6.1.4.1.42229.1.2.6.15.1.1.2
ospfAdjacencyOspfAdjStatus OSPF adjacency status.	Enumeration Enumerated Values: 1 down 2 init 3 attempt 4 twoWay 5 exstart 6 exchange 7 loading 8 full	.1.3.6.1.4.1.42229.1.2.6.15.1.1.3

ribTable

table

.1.3.6.1.4.1.42229.1.2.6.16.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ribTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ribTable'

Copy

Each entry represents a RIB identified by the 'name'
key. All routes in a RIB MUST belong to the same address
family. 
                      
For each routing instance, an implementation SHOULD
provide one system-controlled default RIB for each
supported address family.

ribEntry row .1.3.6.1.4.1.42229.1.2.6.16.1.1

Entry of ribTable

Indexes

ribName

Column	Syntax	OID
ribName The name of the RIB.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.16.1.1.1
ribAddressFamily Address family.	Enumeration Enumerated Values: 1 ipv4 2 ipv4Unicast 3 ipv6	.1.3.6.1.4.1.42229.1.2.6.16.1.1.2
ribDefaultRib This flag has the value of 'true' if and only if the RIB is the default RIB for the given address family. A default RIB always receives direct routes. By default it also receives routes f…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.16.1.1.3
ribDescription Textual description of the RIB.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.16.1.1.4

routeTable

table

.1.3.6.1.4.1.42229.1.2.6.17.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk routeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::routeTable'

Copy

A list of static routes.

routeEntry row .1.3.6.1.4.1.42229.1.2.6.17.1.1

Entry of routeTable

Indexes

ribName routeSourceProtocol routeDestinationPrefix

Column	Syntax	OID
routeSourceProtocol Type of the routing protocol from which the route originated.	CoriantTypesSourceProtocol Type Values: 1 direct 2 static 3 ospfv2 4 bgp 5 ipcp	.1.3.6.1.4.1.42229.1.2.6.17.1.1.1
routeDestinationPrefix IP destination prefix.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.17.1.1.2
routeDescription Textual description of the route.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.17.1.1.3
routePreference This route attribute, also known as administrative distance, allows for selecting the preferred route among routes with the same destination prefix. A smaller value means a more preferred route.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.17.1.1.4
routeActive Indicates that the route is preferred among all routes in the same RIB that have the same destination prefix.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.17.1.1.5

pppProfileTable

table

.1.3.6.1.4.1.42229.1.2.6.18.1.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pppProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pppProfileTable'

Copy

Profile for the point-to-point interface.

pppProfileEntry row .1.3.6.1.4.1.42229.1.2.6.18.1.1.1

Entry of pppProfileTable

Indexes

pppProfilePppPfName

Column	Syntax	OID
pppProfilePppPfName The name of the point-to-point protocol profile.	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.42229.1.2.6.18.1.1.1.1
pppProfilePppFcsLength Specifies whether the frame check sequence is a 16-bit or 32-bit value. default value :16	Enumeration Enumerated Values: 16 t16 32 t32	.1.3.6.1.4.1.42229.1.2.6.18.1.1.1.2
pppProfilePppMru Specifies the maximum number of octets in the Information and Padding fields. UNITS:octets default value :1500	Unsigned32 Constraints: range: 64-1500	.1.3.6.1.4.1.42229.1.2.6.18.1.1.1.3
pppProfilePppRestartTimer Specifies the restart timer of the PPP protocol in seconds. UNITS:seconds default value :3	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.42229.1.2.6.18.1.1.1.4
pppProfilePppMaxFailure Specifies the maximum failure value of the PPP protocol profile. default value :5	Unsigned32 Constraints: range: 2-10	.1.3.6.1.4.1.42229.1.2.6.18.1.1.1.5

ospfLinkProfileTable

table

.1.3.6.1.4.1.42229.1.2.6.18.2.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ospfLinkProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ospfLinkProfileTable'

Copy

Profile for the OSPF protocol link.

ospfLinkProfileEntry row .1.3.6.1.4.1.42229.1.2.6.18.2.1.1

Entry of ospfLinkProfileTable

Indexes

ospfLinkProfileOspfLinkpfName

Column	Syntax	OID
ospfLinkProfileOspfLinkpfName The name of the OSPF protocol link profile.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.18.2.1.1.1
ospfLinkProfileHelloInterval Specifies the Hello Interval in seconds. UNITS:seconds default value :10	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.42229.1.2.6.18.2.1.1.2
ospfLinkProfileRouterDeadInterval Specifies the Router Dead Interval in seconds. UNITS:seconds default value :40	Unsigned32 Constraints: range: 4-1024	.1.3.6.1.4.1.42229.1.2.6.18.2.1.1.3
ospfLinkProfileRetransmissionInterval Specifies the Retransmission Interval in seconds. UNITS:seconds default value :5	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.42229.1.2.6.18.2.1.1.4

oscxTable

table

.1.3.6.1.4.1.42229.1.2.6.19.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oscxTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oscxTable'

Copy

OSCX (Optical Supervisory Channel Extended) interface

oscxEntry row .1.3.6.1.4.1.42229.1.2.6.19.1.1

Entry of oscxTable

Indexes

interfaceIfName

Column	Syntax	OID
oscxChannel Specifies the OSCX channel within the Optical Supervisory Channel.	Enumeration Enumerated Values: 1 t1 2 t2	.1.3.6.1.4.1.42229.1.2.6.19.1.1.1
oscxResourceRef Reference of the lower layer resource associated with this interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.19.1.1.2
oscxAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.6.19.1.1.3

ipv6Table

table

.1.3.6.1.4.1.42229.1.2.6.20.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ipv6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ipv6Table'

Copy

Parameters for the IPv6 address family.

ipv6Entry row .1.3.6.1.4.1.42229.1.2.6.20.1.1

Entry of ipv6Table

Indexes

interfaceIfName

Column	Syntax	OID
ipv6Enabled Controls whether IPv6 is enabled or disabled on this interface. When IPv6 is enabled, this interface is connected to an IPv6 stack, and the interface can send and receive IPv6 packets. …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.20.1.1.1
ipv6Forwarding Controls IPv6 packet forwarding of datagrams received by, but not addressed to, this interface. IPv6 routers forward datagrams. IPv6 hosts do not (except those source-routed via the host). …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.20.1.1.2
ipv6Mtu The size, in octets, of the largest IPv6 packet that the interface will send and receive. The server may restrict the allowed values for this leaf, depending on the interface's type. …	Unsigned32 Constraints: range: 1280-4294967295	.1.3.6.1.4.1.42229.1.2.6.20.1.1.3
ipv6AddressAssignmentMethod IPv6 address assignment method. default value :autoconfig	Enumeration Enumerated Values: 1 static 2 autoconfig	.1.3.6.1.4.1.42229.1.2.6.20.1.1.4

ipv6AddressTable

table

.1.3.6.1.4.1.42229.1.2.6.21.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ipv6AddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ipv6AddressTable'

Copy

The IP address on the interface.
index=1 ipv6 address,
index=2 ipv6 link-local address, read-only

ipv6AddressEntry row .1.3.6.1.4.1.42229.1.2.6.21.1.1

Entry of ipv6AddressTable

Indexes

interfaceIfName ipv6AddressIndex

Column	Syntax	OID
ipv6AddressIndex an uint16 index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.21.1.1.1
ipv6AddressIp The IP address on the interface.	IetfInetTypesIpv6AddressNoZone	.1.3.6.1.4.1.42229.1.2.6.21.1.1.2
ipv6AddressOrigin The origin of this address. default value :static	Enumeration Enumerated Values: 1 other 2 static 3 dhcp 4 linkLayer 5 random	.1.3.6.1.4.1.42229.1.2.6.21.1.1.3
ipv6AddressPrefixLength The length of the subnet prefix.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.21.1.1.4

staticRouteNextHopTable

table

.1.3.6.1.4.1.42229.1.2.6.22.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk staticRouteNextHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::staticRouteNextHopTable'

Copy

Configuration of static next-hop.

staticRouteNextHopEntry row .1.3.6.1.4.1.42229.1.2.6.22.1.1

Entry of staticRouteNextHopTable

Indexes

routingProtocolRtpType routingProtocolRtpName staticRouteDestinationPrefix staticRouteNextHopEntryIndex

Column	Syntax	OID
staticRouteNextHopEntryIndex An user-specified identifier utilised to uniquely reference the next-hop entry in the next-hop list. The value of this index has no semantic meaning other than for referencing the entry.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.22.1.1.1
staticRouteNextHopEntryOutgoingInterface Reference of the outgoing interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.22.1.1.2
staticRouteNextHopEntryNextHopAddress IP address of the next-hop.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.22.1.1.3
staticRouteNextHopEntryMetric metric of the next-hop. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.22.1.1.4

routeNextHopTable

table

.1.3.6.1.4.1.42229.1.2.6.23.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk routeNextHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::routeNextHopTable'

Copy

Configuration of next-hop.

routeNextHopEntry row .1.3.6.1.4.1.42229.1.2.6.23.1.1

Entry of routeNextHopTable

Indexes

ribName routeSourceProtocol routeDestinationPrefix

Column	Syntax	OID
routeNextHopEntryOutgoingInterface Reference of the outgoing interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.23.1.1.1
routeNextHopEntryNextHopAddress IPv4 address of the next-hop.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.23.1.1.2
routeNextHopEntrySourceAddress source address of packet out chosen by kernel if the source address has not been chosen by applcation.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.23.1.1.3

bgpTable

table

.1.3.6.1.4.1.42229.1.2.6.24.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk bgpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::bgpTable'

Copy

Top-level configuration for the BGP router

bgpEntry row .1.3.6.1.4.1.42229.1.2.6.24.1.1

Entry of bgpTable

Indexes

routingProtocolRtpType routingProtocolRtpName

Column	Syntax	OID
bgpAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.6.24.1.1.1
bgpOperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.6.24.1.1.2
bgpAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.6.24.1.1.3
bgpAs Local autonomous system number of the router. Uses the 32-bit as-number type from the model in RFC 6991.	IetfInetTypesAsNumber	.1.3.6.1.4.1.42229.1.2.6.24.1.1.4
bgpRouterId Router id of the router - an unsigned 32-bit integer expressed in dotted quad notation.	IetfYangTypesDottedQuad	.1.3.6.1.4.1.42229.1.2.6.24.1.1.5

bgpNeighborTimersTable

table

.1.3.6.1.4.1.42229.1.2.6.24.2.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk bgpNeighborTimersTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::bgpNeighborTimersTable'

Copy

Timers related to a BGP neighbor

bgpNeighborTimersEntry row .1.3.6.1.4.1.42229.1.2.6.24.2.1.1

Entry of bgpNeighborTimersTable

Indexes

routingProtocolRtpType routingProtocolRtpName bgpNeighborNeighborAddress

Column	Syntax	OID
bgpNeighborTimersConnectRetry Time interval in seconds between attempts to establish a session with the peer. UNITS:seconds default value :30	OctetString	.1.3.6.1.4.1.42229.1.2.6.24.2.1.1.1
bgpNeighborTimersHoldTime Time interval in seconds that a BGP session will be considered active in the absence of keepalive or other messages from the peer. The hold-time is typically set to 3x the keepalive-interval. UNITS:sec…	OctetString	.1.3.6.1.4.1.42229.1.2.6.24.2.1.1.2
bgpNeighborTimersKeepaliveInterval Time interval in seconds between transmission of keepalive messages to the neighbor. Typically set to 1/3 the hold-time. UNITS:seconds default value :30	OctetString	.1.3.6.1.4.1.42229.1.2.6.24.2.1.1.3
bgpNeighborTimersMinimumAdvertisementInterval Minimum time which must elapse between subsequent UPDATE messages relating to a common set of NLRI being transmitted to a peer. This timer is referred to as MinRouteAdvertisementIntervalTimer by RFC 4721 and serves to r…	OctetString	.1.3.6.1.4.1.42229.1.2.6.24.2.1.1.4
bgpNeighborTimersNegotiatedHoldTime The negotiated hold-time for the BGP session UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.6.24.2.1.1.5

bgpNeighborTransportTable

table

.1.3.6.1.4.1.42229.1.2.6.24.3.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk bgpNeighborTransportTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::bgpNeighborTransportTable'

Copy

Transport session parameters for the BGP neighbor

bgpNeighborTransportEntry row .1.3.6.1.4.1.42229.1.2.6.24.3.1.1

Entry of bgpNeighborTransportTable

Indexes

routingProtocolRtpType routingProtocolRtpName bgpNeighborNeighborAddress

Column	Syntax	OID
bgpNeighborTransportLocalAddress Set the local IP (either IPv4 or IPv6) address to use for the session when sending BGP update messages. This may be expressed as either an IP address or reference to the name of an interface.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.24.3.1.1.1
bgpNeighborTransportLocalPort Local TCP port being used for the TCP session supporting the BGP session	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.24.3.1.1.2
bgpNeighborTransportRemoteAddress Remote address to which the BGP session has been established	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.24.3.1.1.3
bgpNeighborTransportRemotePort Remote port being used by the peer for the TCP session supporting the BGP session	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.24.3.1.1.4

bgpNeighborTable

table

.1.3.6.1.4.1.42229.1.2.6.25.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk bgpNeighborTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::bgpNeighborTable'

Copy

List of BGP neighbors configured on the local system,
uniquely identified by peer IPv[46] address

bgpNeighborEntry row .1.3.6.1.4.1.42229.1.2.6.25.1.1

Entry of bgpNeighborTable

Indexes

routingProtocolRtpType routingProtocolRtpName bgpNeighborNeighborAddress

Column	Syntax	OID
bgpNeighborNeighborAddress Address of the BGP peer, either in IPv4 or IPv6	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.25.1.1.1
bgpNeighborEnabled Whether the BGP peer is enabled. In cases where the enabled leaf is set to false, the local system should not initiate connections to the neighbor, and should not respond to TCP connections attempts from the neighbor. I…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.25.1.1.2
bgpNeighborPeerAs AS number of the peer.	IetfInetTypesAsNumber	.1.3.6.1.4.1.42229.1.2.6.25.1.1.3
bgpNeighborDescription An optional textual description (intended primarily for use with a peer or group	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.6.25.1.1.4
bgpNeighborSessionState Operational state of the BGP peer default value :IDLE	Enumeration Enumerated Values: 1 idle 2 connect 3 active 4 opensent 5 openconfirm 6 established	.1.3.6.1.4.1.42229.1.2.6.25.1.1.5
bgpNeighborEstablishedTransitions Number of transitions to the Established state for the neighbor session. This value is analogous to the bgpPeerFsmEstablishedTransitions object from the standard BGP-4 MIB	IetfYangTypesCounter64	.1.3.6.1.4.1.42229.1.2.6.25.1.1.6
bgpNeighborSupportedCapabilities BGP capabilities negotiated as supported with the peerThis is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.6.25.1.1.7

hmoRouteTable

table

.1.3.6.1.4.1.42229.1.2.6.26.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoRouteTable'

Copy

A list of routes from static/ospfv2/bgp.

hmoRouteEntry row .1.3.6.1.4.1.42229.1.2.6.26.1.1

Entry of hmoRouteTable

Indexes

ribName hmoRouteSourceProtocol hmoRouteDestinationPrefix

Column	Syntax	OID
hmoRouteSourceProtocol Type of the routing protocol from which the route originated.	CoriantTypesSourceProtocol Type Values: 1 direct 2 static 3 ospfv2 4 bgp 5 ipcp	.1.3.6.1.4.1.42229.1.2.6.26.1.1.1
hmoRouteDestinationPrefix IP destination prefix.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.26.1.1.2

hmoRouteNextHopTable

table

.1.3.6.1.4.1.42229.1.2.6.27.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoRouteNextHopTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoRouteNextHopTable'

Copy

Configuration of next-hop.

hmoRouteNextHopEntry row .1.3.6.1.4.1.42229.1.2.6.27.1.1

Entry of hmoRouteNextHopTable

Indexes

ribName hmoRouteSourceProtocol hmoRouteDestinationPrefix

Column	Syntax	OID
hmoRouteNextHopEntryOutgoingInterface Reference of the outgoing interface.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.27.1.1.1
hmoRouteNextHopEntryNextHopAddress IPv4 address of the next-hop.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.27.1.1.2
hmoRouteNextHopEntrySourceAddress source address of packet out chosen by kernel if the source address has not been chosen by applcation.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.27.1.1.3

neighborsTable

table

.1.3.6.1.4.1.42229.1.2.6.28.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk neighborsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::neighborsTable'

Copy

NULL

neighborsEntry row .1.3.6.1.4.1.42229.1.2.6.28.1.1

Entry of neighborsTable

Indexes

neighborsAddressFamily

Column	Syntax	OID
neighborsAddressFamily The address-family of the neighbor.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.28.1.1.1

neighborTable

table

.1.3.6.1.4.1.42229.1.2.6.29.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk neighborTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::neighborTable'

Copy

A list of mappings from IP addresses to link-layer addresses.

neighborEntry row .1.3.6.1.4.1.42229.1.2.6.29.1.1

Entry of neighborTable

Indexes

neighborsAddressFamily neighborIp

Column	Syntax	OID
neighborIp The IP address of the neighbor node.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.29.1.1.1
neighborLinkLayerAddress The link-layer address of the neighbor node.	IetfYangTypesPhysAddress	.1.3.6.1.4.1.42229.1.2.6.29.1.1.2
neighborOrigin The origin of this neighbor entry.	Enumeration Enumerated Values: 0 other 1 static 2 dynamic	.1.3.6.1.4.1.42229.1.2.6.29.1.1.3
neighborOutgoingInterface Interface to the neighbor node.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.29.1.1.4
neighborVlanDevName The VLAN device name.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.42229.1.2.6.29.1.1.5

padENTRTable

table

.1.3.6.1.4.1.42229.1.2.6.32.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk padENTRTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::padENTRTable'

Copy

Peer Authorization Database (PAD) entry.

padENTREntry row .1.3.6.1.4.1.42229.1.2.6.32.1.1

Entry of padENTRTable

Indexes

padENTRName

Column	Syntax	OID
padENTRName PAD unique name to identify this entry.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.32.1.1.1

peerAuthenticationTable

table

.1.3.6.1.4.1.42229.1.2.6.33.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk peerAuthenticationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::peerAuthenticationTable'

Copy

This container allows the Security
Controller to configure the
authentication method (pre-shared key,
eap, digitial-signature, null) that
will use a particular peer and the
credentials, which will depend on the
selected authentication method.

peerAuthenticationEntry row .1.3.6.1.4.1.42229.1.2.6.33.1.1

Entry of peerAuthenticationTable

Indexes

padENTRName

Column	Syntax	OID
peerAuthenticationAuthMethod Type of authentication method. default value :pre-shared	Enumeration Enumerated Values: 0 preShared	.1.3.6.1.4.1.42229.1.2.6.33.1.1.1

preSharedTable

table

.1.3.6.1.4.1.42229.1.2.6.34.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk preSharedTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::preSharedTable'

Copy

Shared secret value for PSK.

preSharedEntry row .1.3.6.1.4.1.42229.1.2.6.34.1.1

Entry of preSharedTable

Indexes

padENTRName

Column	Syntax	OID
preSharedSecret Pre-shared secret value.	IetfYangTypesHexString	.1.3.6.1.4.1.42229.1.2.6.34.1.1.1

connENTRTable

table

.1.3.6.1.4.1.42229.1.2.6.35.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk connENTRTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::connENTRTable'

Copy

IKE peer connection information. This list
contains the IKE connection for this peer
with other peers. This will be translated in
real time by IKE Security Associations
established with these nodes.

connENTREntry row .1.3.6.1.4.1.42229.1.2.6.35.1.1

Entry of connENTRTable

Indexes

connENTRName

Column	Syntax	OID
connENTRName Identifier for this connection entry.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.35.1.1.1
connENTRIkeVersion IKE version. Only version 2 is supported so far. default value :ikev2	Enumeration Enumerated Values: 2 ikev2	.1.3.6.1.4.1.42229.1.2.6.35.1.1.2
connENTRAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.6.35.1.1.3
connENTROperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.6.35.1.1.4
connENTRAuthalg Authentication algorithm for establishing the IKE SA.This is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.6.35.1.1.5
connENTREncalg Encryption algorithm for the IKE SAs.This is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.6.35.1.1.6
connENTRDhGroup Group number for Diffie-Hellman Exponentiation used during IKE_SA_INIT for the IKE SA key exchange. default value :14	IpsecDhGroup Type Constraints: range: 14..21	.1.3.6.1.4.1.42229.1.2.6.35.1.1.7
connENTRLocalAddress local address.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.35.1.1.8
connENTRLocalPadEntryRef Local peer authentication information. This node points to a specific entry in the PAD where the authorization information about this particular local peer is stored. It MUST match a pad-entry-name.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.35.1.1.9
connENTRRemoteAddress remote address.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.6.35.1.1.10
connENTRRemotePadEntryRef Remote peer authentication information. This node points to a specific entry in the PAD where the authorization information about this particular remote peer is stored. It MUST match a pad-entry-name.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.6.35.1.1.11

ikeSaLifetimeTable

table

.1.3.6.1.4.1.42229.1.2.6.36.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ikeSaLifetimeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ikeSaLifetimeTable'

Copy

IKE SA lifetime soft. Two lifetime values
can be configured: either rekey time of the
IKE SA or reauth time of the IKE SA. When
the rekey lifetime expires a rekey of the
IKE SA starts. When reauth lifetime
expires a IKE SA reauthentication starts.

ikeSaLifetimeEntry row .1.3.6.1.4.1.42229.1.2.6.36.1.1

Entry of ikeSaLifetimeTable

Indexes

connENTRName

Column	Syntax	OID
ikeSaLifetimeRekeyTime Time in seconds between each IKE SA rekey.The value 0 means infinite. default value :86400	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.36.1.1.1
ikeSaLifetimeReauthTime Time in seconds between each IKE SA reauthentication. The value 0 means infinite. default value :86400	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.36.1.1.2

spdENTRTable

table

.1.3.6.1.4.1.42229.1.2.6.40.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk spdENTRTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::spdENTRTable'

Copy

List of entries which will constitute
the representation of the SPD. Since we
have IKE in this case, it is only
required to send a IPsec policy from
this NE where 'local' is this NE and
'remote' the other NE. The IKE
implementation will install IPsec
policies in the NE in both
directions (inbound and outbound) and
their corresponding IPsec SAs based on
the information in this SPD entry.

spdENTREntry row .1.3.6.1.4.1.42229.1.2.6.40.1.1

Entry of spdENTRTable

Indexes

connENTRName spdENTRSpdEntryName

Column	Syntax	OID
spdENTRAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.6.40.1.1.3
spdENTROperStatus The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operational state. It provides a simple mechanism…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.6.40.1.1.4
spdENTRSpdEntryName SPD entry unique name to identify the IPsec policy.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.40.1.1.5

trafficSelectorTable

table

.1.3.6.1.4.1.42229.1.2.6.42.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk trafficSelectorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::trafficSelectorTable'

Copy

Packets are selected for
processing actions based on the IP and inner
protocol header information, selectors,
matched against entries in the SPD.

trafficSelectorEntry row .1.3.6.1.4.1.42229.1.2.6.42.1.1

Entry of trafficSelectorTable

Indexes

connENTRName spdENTRSpdEntryName

Column	Syntax	OID
trafficSelectorLocalSubnet Local IP address subnet.	IetfInetTypesIpPrefix	.1.3.6.1.4.1.42229.1.2.6.42.1.1.1
trafficSelectorRemoteSubnet Remote IP address subnet.	IetfInetTypesIpPrefix	.1.3.6.1.4.1.42229.1.2.6.42.1.1.2
trafficSelectorInnerProtocol Inner Protocol that is going to be protected with IPsec. default value :any	IpsecIpsecInnerProtocol	.1.3.6.1.4.1.42229.1.2.6.42.1.1.3

localPortsTable

table

.1.3.6.1.4.1.42229.1.2.6.43.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk localPortsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::localPortsTable'

Copy

List of local ports. When the inner
protocol is ICMP this 16 bit value represents
code and type.

localPortsEntry row .1.3.6.1.4.1.42229.1.2.6.43.1.1

Entry of localPortsTable

Indexes

connENTRName spdENTRSpdEntryName localPortsStart localPortsEnd

Column	Syntax	OID
localPortsStart Start port number.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.43.1.1.1
localPortsEnd End port number.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.43.1.1.2

remotePortsTable

table

.1.3.6.1.4.1.42229.1.2.6.44.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk remotePortsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::remotePortsTable'

Copy

List of remote ports. When the upper layer
protocol is ICMP this 16 bit value represents
code and type.

remotePortsEntry row .1.3.6.1.4.1.42229.1.2.6.44.1.1

Entry of remotePortsTable

Indexes

connENTRName spdENTRSpdEntryName remotePortsStart remotePortsEnd

Column	Syntax	OID
remotePortsStart Start port number.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.44.1.1.1
remotePortsEnd End port number.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.44.1.1.2

processingInfoTable

table

.1.3.6.1.4.1.42229.1.2.6.45.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk processingInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::processingInfoTable'

Copy

SPD processing. If the required processing
action is protect, it contains the required
information to process the packet.

processingInfoEntry row .1.3.6.1.4.1.42229.1.2.6.45.1.1

Entry of processingInfoTable

Indexes

connENTRName spdENTRSpdEntryName

Column	Syntax	OID
processingInfoAction If bypass or discard, container ipsec-sa-cfg is empty. default value :protect	Enumeration Enumerated Values: 0 protect 1 bypass 2 discard	.1.3.6.1.4.1.42229.1.2.6.45.1.1.1

ipsecSaCfgTable

table

.1.3.6.1.4.1.42229.1.2.6.46.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ipsecSaCfgTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ipsecSaCfgTable'

Copy

IPsec SA configuration included in the SPD
entry.

ipsecSaCfgEntry row .1.3.6.1.4.1.42229.1.2.6.46.1.1

Entry of ipsecSaCfgTable

Indexes

connENTRName spdENTRSpdEntryName

Column	Syntax	OID
ipsecSaCfgMode IPsec SA has to be processed in transport or tunnel mode. default value :transport	Enumeration Enumerated Values: 0 transport 1 tunnel	.1.3.6.1.4.1.42229.1.2.6.46.1.1.1
ipsecSaCfgProtocolParameters Security protocol of the IPsec SA: Only ESP is supported but it could be extended in the future. default value :esp	Enumeration Enumerated Values: 0 esp	.1.3.6.1.4.1.42229.1.2.6.46.1.1.2

espAlgorithmsTable

table

.1.3.6.1.4.1.42229.1.2.6.47.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk espAlgorithmsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::espAlgorithmsTable'

Copy

Configuration of Encapsulating
Security Payload (ESP) parameters and
algorithms.

espAlgorithmsEntry row .1.3.6.1.4.1.42229.1.2.6.47.1.1

Entry of espAlgorithmsTable

Indexes

connENTRName spdENTRSpdEntryName

Column	Syntax	OID
espAlgorithmsIntegrity Configuration of ESP authentication based on the specified integrity algorithm. With AEAD algorithms, the integrity node is not used.This is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.6.47.1.1.1
espAlgorithmsEncryption Configuration of ESP encryption algorithms.This is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.6.47.1.1.2

childSaInfoTable

table

.1.3.6.1.4.1.42229.1.2.6.48.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk childSaInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::childSaInfoTable'

Copy

Specific information for IPsec SAs
SAs. It includes PFS group and IPsec SAs
rekey lifetimes.

childSaInfoEntry row .1.3.6.1.4.1.42229.1.2.6.48.1.1

Entry of childSaInfoTable

Indexes

connENTRName

Column	Syntax	OID
childSaInfoPfsGroups perfect forward secrecy group numbers.This is a leaf list, encode by some leafs.	OctetString	.1.3.6.1.4.1.42229.1.2.6.48.1.1.1

childSaLifetimeTable

table

.1.3.6.1.4.1.42229.1.2.6.49.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk childSaLifetimeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::childSaLifetimeTable'

Copy

IPsec SA lifetime soft.

childSaLifetimeEntry row .1.3.6.1.4.1.42229.1.2.6.49.1.1

Entry of childSaLifetimeTable

Indexes

connENTRName

Column	Syntax	OID
childSaLifetimeTime Time in seconds since the IPsec SA was added. For example, if this value is 180 seconds it means the IPsec SA expires in 180 seconds since it was added. The value 0 implies infinite. def…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.49.1.1.1
childSaLifetimeBytes If the IPsec SA processes the number of bytes expressed in this leaf, the IPsec SA expires and should be rekeyed. The value 0 implies infinite. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.49.1.1.2

ikeStateTable

table

.1.3.6.1.4.1.42229.1.2.6.51.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ikeStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ikeStateTable'

Copy

IKE state data for a particular
connection.

ikeStateEntry row .1.3.6.1.4.1.42229.1.2.6.51.1.1

Entry of ikeStateTable

Indexes

connENTRName

Column	Syntax	OID
ikeStateInitiator It is acting as initiator for this connection.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.6.51.1.1.1
ikeStateInitiatorIkesaSpi Initiator's IKE SA SPI.	OctetString	.1.3.6.1.4.1.42229.1.2.6.51.1.1.2
ikeStateResponderIkesaSpi Responder's IKE SA SPI.	OctetString	.1.3.6.1.4.1.42229.1.2.6.51.1.1.3
ikeStateEstablished Seconds since this IKE SA has been established.	OctetString	.1.3.6.1.4.1.42229.1.2.6.51.1.1.4
ikeStateCurrentRekeyTime Seconds before IKE SA must be rekeyed.	OctetString	.1.3.6.1.4.1.42229.1.2.6.51.1.1.5
ikeStateCurrentReauthTime Seconds before IKE SA must be re-authenticated.	OctetString	.1.3.6.1.4.1.42229.1.2.6.51.1.1.6

aclTable

table

.1.3.6.1.4.1.42229.1.2.6.52.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aclTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aclTable'

Copy

An ACL is an ordered list of ACEs.  Each ACE has a
list of match criteria and a list of actions.

aclEntry row .1.3.6.1.4.1.42229.1.2.6.52.1.1

Entry of aclTable

Indexes

aclName

Column	Syntax	OID
aclName The name of the access list.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.52.1.1.1
aclType Type of ACL. Indicates the primary intended type of match criteria (e.g., Ethernet, IPv4, IPv6, mixed, etc.) used in the list instance.	Enumeration Enumerated Values: 0 ipv4AclType 1 ipv6AclType	.1.3.6.1.4.1.42229.1.2.6.52.1.1.2

aceTable

table

.1.3.6.1.4.1.42229.1.2.6.53.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aceTable'

Copy

List of ACEs.

aceEntry row .1.3.6.1.4.1.42229.1.2.6.53.1.1

Entry of aceTable

Indexes

aclName aceSequenceId

Column	Syntax	OID
aceSequenceId Sequence number that establishes the relative order of the ACE within an ACL	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.42229.1.2.6.53.1.1.2
aceLabel A unique name identifying this ACE.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.6.53.1.1.3
aceForwardingAction Specifies the forwarding action per ace entry.	Enumeration Enumerated Values: 0 accept 1 drop	.1.3.6.1.4.1.42229.1.2.6.53.1.1.4

aclSetTable

table

.1.3.6.1.4.1.42229.1.2.6.58.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aclSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aclSetTable'

Copy

List of ACLs on local service.

aclSetEntry row .1.3.6.1.4.1.42229.1.2.6.58.1.1

Entry of aclSetTable

Indexes

aclLocalServiceService aclSetName

Column	Syntax	OID
aclSetName Reference to the ACL name applied on the local network services.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.6.58.1.1.1

aclIpv4Table

table

.1.3.6.1.4.1.42229.1.2.6.59.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aclIpv4Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aclIpv4Table'

Copy

Rule set that matches IPv4 headers.

aclIpv4Entry row .1.3.6.1.4.1.42229.1.2.6.59.1.1

Entry of aclIpv4Table

Indexes

aclName aceSequenceId

Column	Syntax	OID
aclIpv4SourceIpv4Network Source IPv4 address prefix.	IetfInetTypesIpv4Prefix	.1.3.6.1.4.1.42229.1.2.6.59.1.1.1
aclIpv4Protocol Internet Protocol number. Refers to the protocol of the payload.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.59.1.1.2

aclIpv6Table

table

.1.3.6.1.4.1.42229.1.2.6.60.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aclIpv6Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aclIpv6Table'

Copy

Rule set that matches IPv6 headers.

aclIpv6Entry row .1.3.6.1.4.1.42229.1.2.6.60.1.1

Entry of aclIpv6Table

Indexes

aclName aceSequenceId

Column	Syntax	OID
aclIpv6SourceIpv6Network Source IPv6 address prefix.	IetfInetTypesIpv6Prefix	.1.3.6.1.4.1.42229.1.2.6.60.1.1.1
aclIpv6Protocol Internet Protocol number. Refers to the protocol of the payload. In IPv6, this field is known as 'next-header', and if extension headers are present, the protocol is present in the 'upper-layer' header.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.6.60.1.1.2

aclTcpTable

table

.1.3.6.1.4.1.42229.1.2.6.61.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aclTcpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aclTcpTable'

Copy

Rule set that matches TCP headers.

aclTcpEntry row .1.3.6.1.4.1.42229.1.2.6.61.1.1

Entry of aclTcpTable

Indexes

aclName aceSequenceId

Column	Syntax	OID
aclTcpDestinationLowerPort Lower boundary for a port.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.61.1.1.1
aclTcpDestinationUpperPort Upper boundary for a port.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.61.1.1.2

aclUdpTable

table

.1.3.6.1.4.1.42229.1.2.6.62.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aclUdpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aclUdpTable'

Copy

Rule set that matches UDP headers.

aclUdpEntry row .1.3.6.1.4.1.42229.1.2.6.62.1.1

Entry of aclUdpTable

Indexes

aclName aceSequenceId

Column	Syntax	OID
aclUdpDestinationLowerPort Lower boundary for a port.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.62.1.1.1
aclUdpDestinationUpperPort Upper boundary for a port.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.6.62.1.1.2

aclLocalServiceTable

table

.1.3.6.1.4.1.42229.1.2.6.63.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aclLocalServiceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aclLocalServiceTable'

Copy

The ACL attachment point of all the local network services.

aclLocalServiceEntry row .1.3.6.1.4.1.42229.1.2.6.63.1.1

Entry of aclLocalServiceTable

Indexes

aclLocalServiceService

Column	Syntax	OID
aclLocalServiceService NULL	Enumeration Enumerated Values: 0 all 1 ssh 2 cli 3 snmp 4 netconf 5 restconf 6 webgui 7 grpc	.1.3.6.1.4.1.42229.1.2.6.63.1.1.1

userTable

table

.1.3.6.1.4.1.42229.1.2.7.2.1 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk userTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::userTable'

Copy

NULL

userEntry row .1.3.6.1.4.1.42229.1.2.7.2.1.1

Entry of userTable

Indexes

userName

Column	Syntax	OID
userName User name.	CoriantTypesUserName Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.7.2.1.1.1
userPassword The password of the user.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.7.2.1.1.2
userClass The access class for the user. default value :supervision	Enumeration Enumerated Values: 0 cryptoOfficer 1 administration 2 configuration 3 operation 4 supervision	.1.3.6.1.4.1.42229.1.2.7.2.1.1.3
userMaxInvalidLogin This attribute is the maximum number of consecutive and invalid login attempts before an account is suspended (lockedout). Conditions:../user-aaa-type = 'local' default value :3	Unsigned32 Constraints: range: 0-9	.1.3.6.1.4.1.42229.1.2.7.2.1.1.4
userSuspensionTime This attribute is the duration of UID suspension following consecutive invalid login attempts. Setting the value to 0 disables this attribute. Conditions:../user-aaa-type = 'local' UNITS:seconds default value :60	Unsigned32 Constraints: range: 0-300	.1.3.6.1.4.1.42229.1.2.7.2.1.1.5
userTimeout This attribute is the Session Time Out Interval. If there are no messages between the user and the NE over the Time Out interval, the session is logged off. Setting the value to 0 disables this attribute (meaning the se…	Unsigned32 Constraints: range: 0-300	.1.3.6.1.4.1.42229.1.2.7.2.1.1.6
userPasswordAgingInterval This attribute is the Password Aging Interval. Setting the value to 0 disables this attribute. Conditions:../user-aaa-type = 'local' UNITS:days default value :0	Unsigned32 Constraints: range: 0-365	.1.3.6.1.4.1.42229.1.2.7.2.1.1.7
userPasswordExpirationDate This attribute shows the password expiration date. Conditions:../user-aaa-type = 'local'	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.7.2.1.1.8
userAdminStatus The attribute allows administrators to modify the user administration status. default value :enabled	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.7.2.1.1.9
userStatus This attribute shows the user status. User with status 'enabled' will have access to the system. User with status 'disabled' not have access to the system. User with status 'password-aged' will have access to the system…	Enumeration Enumerated Values: 1 enabled 2 disabled 3 passwordAged 4 lockout	.1.3.6.1.4.1.42229.1.2.7.2.1.1.10
userMaxSessions This attribute specifies the maximum number of sessions allowed for this user. default value :6	Unsigned32 Constraints: range: 1-20	.1.3.6.1.4.1.42229.1.2.7.2.1.1.11
userLastLoginDate The last login date/time of the user. default value :1970-01-01T00:00:00Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.7.2.1.1.12
userAaaType Indicates the authentication method of the user. default value :local	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.42229.1.2.7.2.1.1.13

sessionTable

table

.1.3.6.1.4.1.42229.1.2.7.3.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk sessionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::sessionTable'

Copy

NULL

sessionEntry row .1.3.6.1.4.1.42229.1.2.7.3.1.1

Entry of sessionTable

Indexes

sessionId

Column	Syntax	OID
sessionId Specifies a unique identifier of the current session. It indicates the IP address and transport layer port number associated with this session. If the session is initiated from the serial port, the value is 'NA'.	CoriantTypesSessionId Type Constraints: range: 0..45	.1.3.6.1.4.1.42229.1.2.7.3.1.1.1
sessionUser Points to a user instance. Conditions:../session-mode = 'server'	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.7.3.1.1.2
sessionType Session type.	Enumeration Enumerated Values: 1 cli 2 snmp 3 netconf 4 restconf 5 webgui 6 gnmi	.1.3.6.1.4.1.42229.1.2.7.3.1.1.3
sessionProtocol Indicates which protocol has been used to establish the session.	Enumeration Enumerated Values: 1 telnet 2 telnetRaw 3 serial 4 ssh 5 sshRaw 6 https 7 http	.1.3.6.1.4.1.42229.1.2.7.3.1.1.4
sessionCreatedTime The timestamp the user has created this session.	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.7.3.1.1.5
sessionMode the device role in session connection default value :server	Enumeration Enumerated Values: 1 server 2 client	.1.3.6.1.4.1.42229.1.2.7.3.1.1.6

aaaServerTable

table

.1.3.6.1.4.1.42229.1.2.7.4.1 · 1 row entry · 13 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk aaaServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::aaaServerTable'

Copy

NULL

aaaServerEntry row .1.3.6.1.4.1.42229.1.2.7.4.1.1

Entry of aaaServerTable

Indexes

aaaServerServerName

Column	Syntax	OID
aaaServerServerName specify the name of aaa server.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.42229.1.2.7.4.1.1.1
aaaServerServerPriority This is used to sort the servers in the order of precedence.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.42229.1.2.7.4.1.1.2
aaaServerProtocolSupported specify the protocol used for AAA.	Enumeration Enumerated Values: 1 tacacsplus 2 radius	.1.3.6.1.4.1.42229.1.2.7.4.1.1.3
aaaServerServerIp The IP address of AAA server.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.7.4.1.1.4
aaaServerServerPort AAA server port number. Conditions:../protocol-supported = 'TACACSPLUS' default value :49	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.7.4.1.1.5
aaaServerSharedSecret The shared secret of the aaa server. The shared secret will be displayed as *. default value :sharedkey	OctetString Constraints: range: 0-100	.1.3.6.1.4.1.42229.1.2.7.4.1.1.6
aaaServerRoleSupported specify the role of the server for AAA. default value :authentication authorization accounting	Bits Enumerated Values: 0 authentication 1 authorization 2 accounting	.1.3.6.1.4.1.42229.1.2.7.4.1.1.7
aaaServerAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.7.4.1.1.8
aaaServerTimeOut Specifies the response timeout of Access-Request messages sent to a AAA server in seconds. UNITS:seconds default value :5	Unsigned32 Constraints: range: 1-60	.1.3.6.1.4.1.42229.1.2.7.4.1.1.9
aaaServerRetry Specifies the number of attempted Access-Request messages to a single AAA server before failing authentication. default value :3	Unsigned32 Constraints: range: 0-10	.1.3.6.1.4.1.42229.1.2.7.4.1.1.10
aaaServerServerPortAuthentication AAA server authentication port number. Conditions:../protocol-supported = 'RADIUS' default value :1812	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.7.4.1.1.11
aaaServerServerPortAccounting AAA server accounting port number. Conditions:../protocol-supported = 'RADIUS' default value :1813	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.7.4.1.1.12
aaaServerSourceIp Source IP address used for RADIUS communications. Conditions:../protocol-supported = 'RADIUS' default value :auto	OctetString	.1.3.6.1.4.1.42229.1.2.7.4.1.1.13

keySyncSessionTable

table

.1.3.6.1.4.1.42229.1.2.7.5.1 · 1 row entry · 12 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk keySyncSessionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::keySyncSessionTable'

Copy

TLS session to synchronize ODU encryption key.

keySyncSessionEntry row .1.3.6.1.4.1.42229.1.2.7.5.1.1

Entry of keySyncSessionTable

Indexes

keySyncSessionId

Column	Syntax	OID
keySyncSessionId Specifies a unique identifier of the key synchronization session.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.42229.1.2.7.5.1.1.1
keySyncSessionAdminStatus The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the r…	Enumeration Enumerated Values: 1 up 2 down 3 upNoAlm	.1.3.6.1.4.1.42229.1.2.7.5.1.1.2
keySyncSessionSessionStatus Indicating the status of key sync session.	Enumeration Enumerated Values: 0 unknown 1 disabled 2 connecting 3 incomplete 4 connected 5 unreachable 6 failedAuth 7 failed	.1.3.6.1.4.1.42229.1.2.7.5.1.1.4
keySyncSessionRemoteIp The IP address of remote session server.	IetfInetTypesIpv4Address	.1.3.6.1.4.1.42229.1.2.7.5.1.1.5
keySyncSessionRemotePort The port number of remote session server. default value :8443	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.7.5.1.1.6
keySyncSessionLocalIp The source IP address of a manual session.	IetfInetTypesIpv4Address	.1.3.6.1.4.1.42229.1.2.7.5.1.1.7
keySyncSessionLocalPort The source port number of a manual session.	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.7.5.1.1.8
keySyncSessionSourceAddressFrom specifies the interface of the source IP address of the outgoing packets. Conditions:../key-sync-session-type = 'manual' default value :auto	KeySyncSessionInterfaceRef	.1.3.6.1.4.1.42229.1.2.7.5.1.1.9
keySyncSessionConnectedTime The timestamp the user has created this session.	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.7.5.1.1.10
keySyncSessionType Indicating the type of key sync session, 'manual' is for the session user configured, and 'auto' is for the session automatically created by system. default value :manual	Enumeration Enumerated Values: 1 auto 2 manual	.1.3.6.1.4.1.42229.1.2.7.5.1.1.11
keySyncSessionAuthType Indicating the authentication type of the key sync session. default value :proprietary-psk	Enumeration Enumerated Values: 1 tlsCertificate 2 proprietaryPsk	.1.3.6.1.4.1.42229.1.2.7.5.1.1.12
keySyncSessionLocalCertificate Previously installed certificate that authenticates the NE. default value :none	KeySyncSessionCertificateRef	.1.3.6.1.4.1.42229.1.2.7.5.1.1.13

pskMapTable

table

.1.3.6.1.4.1.42229.1.2.7.7.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pskMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pskMapTable'

Copy

NULL

pskMapEntry row .1.3.6.1.4.1.42229.1.2.7.7.1.1

Entry of pskMapTable

Indexes

pskMapPskIdentity

Column	Syntax	OID
pskMapPskIdentity The PSK identity encoded as a UTF-8 string. For details how certain common PSK identity formats can be encoded in UTF-8, see section 5.1. of RFC 4279.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.7.7.1.1.1
pskMapKey The key associated with the PSK identity	IetfYangTypesHexString	.1.3.6.1.4.1.42229.1.2.7.7.1.1.2
pskMapPskStatus Status of the psk-map. psk-map can be updated only if psk-status is in init or sync status; the previous psk-map updating can be cancelled only if psk-satus is updating; psk-map cannot be updated and previous psk-map up…	Enumeration Enumerated Values: 1 init 2 sync 3 fail 4 authenticate	.1.3.6.1.4.1.42229.1.2.7.7.1.1.4
pskMapPskInfo The label of the psk-map. default value :	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.7.7.1.1.5
pskMapWarningTimer Warning Time before psk-map updating completes. UNITS:minutes default value :5	Unsigned32 Constraints: range: 1-240	.1.3.6.1.4.1.42229.1.2.7.7.1.1.6
pskMapCriticalTimer Critical time before psk-map updating completes. UNITS:minutes default value :30	Unsigned32 Constraints: range: 1-480	.1.3.6.1.4.1.42229.1.2.7.7.1.1.7
pskMapTrafficOffTimer Traffic off time before psk-map updating completes. UNITS:minutes default value :1440	Unsigned32 Constraints: range: 1-1440	.1.3.6.1.4.1.42229.1.2.7.7.1.1.8
pskMapEffectiveTimestamp Indicates the Time of new psk starts to take effect.	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.7.7.1.1.9

keyTable

table

.1.3.6.1.4.1.42229.1.2.7.9.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk keyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::keyTable'

Copy

A key maintained by the keystore.

keyEntry row .1.3.6.1.4.1.42229.1.2.7.9.1.1

Entry of keyTable

Indexes

keyName

Column	Syntax	OID
keyName An arbitrary name for the key.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.7.9.1.1.1
keyAlgorithmIdentifier Identifies which algorithm is to be used with the key. This value determines how the 'private-key' and 'public-key' fields are interpreted.	Enumeration Enumerated Values: 1 rsa1024 2 rsa2048 3 rsa3072 4 rsa4096 5 rsa7680 6 rsa15360 7 secp192r1 8 secp256r1 9 secp384r1 10 secp521r1	.1.3.6.1.4.1.42229.1.2.7.9.1.1.2
keyPublicKey A binary string that contains the value of the public key. The interpretation of the content is defined in the registration of the key algorithm. For example, a DSA key is an INTEGER, an RSA key is represented as RSA…	OctetString Constraints: range: 0-3000	.1.3.6.1.4.1.42229.1.2.7.9.1.1.3

certificateTable

table

.1.3.6.1.4.1.42229.1.2.7.10.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk certificateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::certificateTable'

Copy

A certificate for this private key.

certificateEntry row .1.3.6.1.4.1.42229.1.2.7.10.1.1

Entry of certificateTable

Indexes

keyName certificateName

Column	Syntax	OID
certificateName An arbitrary name for the certificate. The name must be a unique across all keys, not just within this key.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.7.10.1.1.1
certificateVersion version of the certificate. default value :x509v1	Enumeration Enumerated Values: 1 x509v1 2 x509v2 3 x509v3	.1.3.6.1.4.1.42229.1.2.7.10.1.1.2
certificateSerialNumber serial number of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.10.1.1.3
certificateSignatureAlgorithm signature algorithm of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.10.1.1.4
certificateIssuer issuer of the certificate.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.7.10.1.1.5
certificateValidFrom valid-from date and time of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.10.1.1.6
certificateValidTo valid-to date and time of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.10.1.1.7
certificateSubject subject of the certificate.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.7.10.1.1.8
certificatePublicKeyAlgorithm public-key-algorithm of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.10.1.1.9
certificateSubjectAltName Subject Alternative Names of the certificate.	OctetString Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.7.10.1.1.10

trustedCertificateGroupTable

table

.1.3.6.1.4.1.42229.1.2.7.11.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk trustedCertificateGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::trustedCertificateGroupTable'

Copy

A list of trusted certificates.  
These certificates can be used by a server to authenticate clients, or by clients to authenticate servers.  
The certificates may be endpoint specific or for certificate authorities, to authenticate many clients at once.  
Each list of certificates SHOULD be specific to a purpose, as the list as a whole may be referenced by other modules.
For instance, a NETCONF server model might point to a list of certificates to use when authenticating client certificates.

trustedCertificateGroupEntry row .1.3.6.1.4.1.42229.1.2.7.11.1.1

Entry of trustedCertificateGroupTable

Indexes

trustedCertificateGroupName

Column	Syntax	OID
trustedCertificateGroupName An arbitrary name for this list of trusted certificates.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.7.11.1.1.1

trustedCertificateTable

table

.1.3.6.1.4.1.42229.1.2.7.12.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk trustedCertificateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::trustedCertificateTable'

Copy

A trusted certificate for a specific use.  
Note, this 'certificate' is a list in order to encode any associated intermediate certificates.

trustedCertificateEntry row .1.3.6.1.4.1.42229.1.2.7.12.1.1

Entry of trustedCertificateTable

Indexes

trustedCertificateGroupName trustedCertificateName

Column	Syntax	OID
trustedCertificateName An arbitrary name for this trusted certificate. Must be unique across all lists of trusted certificates (not just this list) so that a leafref to it from another module can resolve to unique values.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.7.12.1.1.1
trustedCertificateVersion version of the certificate. default value :x509v1	Enumeration Enumerated Values: 1 x509v1 2 x509v2 3 x509v3	.1.3.6.1.4.1.42229.1.2.7.12.1.1.2
trustedCertificateSerialNumber serial number of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.12.1.1.3
trustedCertificateSignatureAlgorithm signature algorithm of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.12.1.1.4
trustedCertificateIssuer issuer of the certificate.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.7.12.1.1.5
trustedCertificateValidFrom valid-from date and time of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.12.1.1.6
trustedCertificateValidTo valid-to date and time of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.12.1.1.7
trustedCertificateSubject subject of the certificate.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.7.12.1.1.8
trustedCertificatePublicKeyAlgorithm public-key-algorithm of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.12.1.1.9
trustedCertificateSubjectAltName Subject Alternative Names of the certificate.	OctetString Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.7.12.1.1.10

authorizedKeyTable

table

.1.3.6.1.4.1.42229.1.2.7.14.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk authorizedKeyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::authorizedKeyTable'

Copy

NULL

authorizedKeyEntry row .1.3.6.1.4.1.42229.1.2.7.14.1.1

Entry of authorizedKeyTable

Indexes

userName authorizedKeyName

Column	Syntax	OID
authorizedKeyName name of authorized key.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.7.14.1.1.1
authorizedKeyPublicKey one of the authorized public keys of the user.	OctetString Constraints: range: 0-3000	.1.3.6.1.4.1.42229.1.2.7.14.1.1.2

certificateChainTable

table

.1.3.6.1.4.1.42229.1.2.7.15.1 · 1 row entry · 10 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk certificateChainTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::certificateChainTable'

Copy

certificate chain.

certificateChainEntry row .1.3.6.1.4.1.42229.1.2.7.15.1.1

Entry of certificateChainTable

Indexes

keyName certificateName certificateChainLevel

Column	Syntax	OID
certificateChainLevel certificate chain level.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.7.15.1.1.1
certificateChainVersion version of the certificate. default value :x509v1	Enumeration Enumerated Values: 1 x509v1 2 x509v2 3 x509v3	.1.3.6.1.4.1.42229.1.2.7.15.1.1.2
certificateChainSerialNumber serial number of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.15.1.1.3
certificateChainSignatureAlgorithm signature algorithm of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.15.1.1.4
certificateChainIssuer issuer of the certificate.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.7.15.1.1.5
certificateChainValidFrom valid-from date and time of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.15.1.1.6
certificateChainValidTo valid-to date and time of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.15.1.1.7
certificateChainSubject subject of the certificate.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.42229.1.2.7.15.1.1.8
certificateChainPublicKeyAlgorithm public-key-algorithm of the certificate.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.7.15.1.1.9
certificateChainSubjectAltName Subject Alternative Names of the certificate.	OctetString Constraints: range: 0-2000	.1.3.6.1.4.1.42229.1.2.7.15.1.1.10

snmpv3Table

table

.1.3.6.1.4.1.42229.1.2.8.1.1.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk snmpv3Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::snmpv3Table'

Copy

SNMPv3 configuration for user

snmpv3Entry row .1.3.6.1.4.1.42229.1.2.8.1.1.1.1

Entry of snmpv3Table

Indexes

userName

Column	Syntax	OID
snmpv3UserSecLevel Specifies the SNMPv3 user security level. default value :no-auth-no-priv	Enumeration Enumerated Values: 1 authPriv 2 authNoPriv 3 noAuthNoPriv	.1.3.6.1.4.1.42229.1.2.8.1.1.1.1.1
snmpv3AuthProtocol Specifies the authentication protocol that the SNMPv3 user being created will use. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv') default value :SHA	Enumeration Enumerated Values: 1 md5 2 sha	.1.3.6.1.4.1.42229.1.2.8.1.1.1.1.2
snmpv3AuthPassphrase Specifies the SNMPv3 authentication pass phrase. Conditions:(../user-sec-level = 'auth-priv') or (../user-sec-level = 'auth-no-priv')	OctetString Constraints: range: 0-0 range: 8-64	.1.3.6.1.4.1.42229.1.2.8.1.1.1.1.3
snmpv3PrivProtocol Specifies the privacy protocol that the SNMPv3 user being created will use. Conditions:../user-sec-level = 'auth-priv' default value :AES	Enumeration Enumerated Values: 1 des 2 aes	.1.3.6.1.4.1.42229.1.2.8.1.1.1.1.4
snmpv3PrivPassphrase Specifies the SNMPv3 privacy pass phrase. Conditions:../user-sec-level = 'auth-priv'	OctetString Constraints: range: 0-0 range: 8-64	.1.3.6.1.4.1.42229.1.2.8.1.1.1.1.5

snmpCommunityTable

table

.1.3.6.1.4.1.42229.1.2.8.1.3.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk snmpCommunityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::snmpCommunityTable'

Copy

List of SNMP Community Strings. Please note that the trap-community-string is located in the snmp-target MO.

snmpCommunityEntry row .1.3.6.1.4.1.42229.1.2.8.1.3.1.1

Entry of snmpCommunityTable

Indexes

snmpCommunityCommunityString

Column	Syntax	OID
snmpCommunityCommunityString Community String.	CoriantTypesSnmpString Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.8.1.3.1.1.1
snmpCommunityCommunityStringAccess snmp access right of this community string. default value :read-only	Enumeration Enumerated Values: 1 readOnly	.1.3.6.1.4.1.42229.1.2.8.1.3.1.1.2

snmpTargetTable

table

.1.3.6.1.4.1.42229.1.2.8.1.4.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk snmpTargetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::snmpTargetTable'

Copy

List of SNMP targets (trap listeners)

snmpTargetEntry row .1.3.6.1.4.1.42229.1.2.8.1.4.1.1

Entry of snmpTargetTable

Indexes

snmpTargetTargetName

Column	Syntax	OID
snmpTargetSnmpVersion snmp version. default value :v2c	Enumeration Enumerated Values: 2 v2c 3 v3	.1.3.6.1.4.1.42229.1.2.8.1.4.1.1.1
snmpTargetSnmpv3User Indicate the snmpv3 user. Conditions:../snmp-version = 'v3'	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.8.1.4.1.1.2
snmpTargetTargetName Identifies the SNMP target	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.42229.1.2.8.1.4.1.1.3
snmpTargetTargetIp IP address of the SNMP target	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.8.1.4.1.1.4
snmpTargetTargetPort UDP port number. default value :162	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.8.1.4.1.1.5
snmpTargetTargetTransport Type of transport for the SNMP target default value :udp	Enumeration Enumerated Values: 1 udp	.1.3.6.1.4.1.42229.1.2.8.1.4.1.1.6
snmpTargetTrapCommunityString Community string used for SNMP traps Conditions:../snmp-version = 'v2c' default value :groove	CoriantTypesSnmpString Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.8.1.4.1.1.7

cliConfigTable

table

.1.3.6.1.4.1.42229.1.2.8.2.1.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk cliConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::cliConfigTable'

Copy

NULL

cliConfigEntry row .1.3.6.1.4.1.42229.1.2.8.2.1.1.1

Entry of cliConfigTable

Indexes

sessionId

Column	Syntax	OID
cliConfigCliLines Number of rows to be used for display. This value is automatically discovered when possible default value :40	Unsigned32 Constraints: range: 10-1000	.1.3.6.1.4.1.42229.1.2.8.2.1.1.1.1
cliConfigCliColumns Number of columns to be used for display. This value is automatically discovered when possible default value :140	Unsigned32 Constraints: range: 80-4000	.1.3.6.1.4.1.42229.1.2.8.2.1.1.1.2
cliConfigMaxHistorySize Command history maximum size for the current session default value :500	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.8.2.1.1.1.3
cliConfigInteractiveMode This determines if the CLI shall issue interactive prompt (e.g. for prompting additional information, or for confirmation of user initiated actions). Enabled = CLI will prompt user (default) Disabled = CLI will suppr…	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.8.2.1.1.1.4

cliAliasTable

table

.1.3.6.1.4.1.42229.1.2.8.4.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk cliAliasTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::cliAliasTable'

Copy

List of aliases used in CLI. 
Can only be accessed via 'alias/unalias' CLI commands.

cliAliasEntry row .1.3.6.1.4.1.42229.1.2.8.4.1.1

Entry of cliAliasTable

Indexes

cliAliasName

Column	Syntax	OID
cliAliasName Name of the alias	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.42229.1.2.8.4.1.1.1
cliAliasValue Value of the alias	OctetString Constraints: range: 1-1024	.1.3.6.1.4.1.42229.1.2.8.4.1.1.2

cliScriptTable

table

.1.3.6.1.4.1.42229.1.2.8.5.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk cliScriptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::cliScriptTable'

Copy

List of available CLI scripts. 
Scripts can be executed with the 'run' command

cliScriptEntry row .1.3.6.1.4.1.42229.1.2.8.5.1.1

Entry of cliScriptTable

Indexes

cliScriptScriptName

Column	Syntax	OID
cliScriptScriptName File name of the CLI script	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.8.5.1.1.1
cliScriptDescription Description of the CLI script	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.42229.1.2.8.5.1.1.2

softwareloadTable

table

.1.3.6.1.4.1.42229.1.2.9.2.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk softwareloadTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::softwareloadTable'

Copy

The list of the software loads in the system.

softwareloadEntry row .1.3.6.1.4.1.42229.1.2.9.2.1.1

Entry of softwareloadTable

Indexes

softwareloadSwloadId

Column	Syntax	OID
softwareloadSwloadId software load identifier which is uniquely identify specific software load.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.42229.1.2.9.2.1.1.1
softwareloadSwloadState Indicates the state of the software load.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.42229.1.2.9.2.1.1.2
softwareloadSwloadVersion Indicates the software version of the software load.	CoriantFileSwTypesSwVersion Type Constraints: range: 0..20	.1.3.6.1.4.1.42229.1.2.9.2.1.1.3
softwareloadSwloadVendor Vendor information of the software load.	CoriantFileSwTypesSwloadVendor Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.9.2.1.1.4
softwareloadSwloadProduct Indicates the network element family this software belongs to.	CoriantFileSwTypesSwloadProduct Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.9.2.1.1.5
softwareloadSwloadLabel The label of the software load including summary information.	OctetString Constraints: range: 0-1024	.1.3.6.1.4.1.42229.1.2.9.2.1.1.6

databaseTable

table

.1.3.6.1.4.1.42229.1.2.9.3.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk databaseTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::databaseTable'

Copy

The list of the databases in the system.

databaseEntry row .1.3.6.1.4.1.42229.1.2.9.3.1.1

Entry of databaseTable

Indexes

softwareloadSwloadId databaseId

Column	Syntax	OID
databaseId database identifier which is uniquely identify specific database.	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.42229.1.2.9.3.1.1.1
databaseState Indicates the state of the database.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.42229.1.2.9.3.1.1.2
databaseVersion Indicates the database version.	CoriantFileSwTypesSwVersion Type Constraints: range: 0..20	.1.3.6.1.4.1.42229.1.2.9.3.1.1.3
databaseVendor Vendor information of the database.	CoriantFileSwTypesSwloadVendor Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.9.3.1.1.4
databaseProduct Indicates the network element family this database belongs to.	CoriantFileSwTypesSwloadProduct Type Constraints: range: 0..32	.1.3.6.1.4.1.42229.1.2.9.3.1.1.5
databaseBackupTime Indicates the database last backup time. default value :	OctetString	.1.3.6.1.4.1.42229.1.2.9.3.1.1.6

fwVersionMapTable

table

.1.3.6.1.4.1.42229.1.2.9.4.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk fwVersionMapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::fwVersionMapTable'

Copy

The firmware information of the upgradable devices included in the software load.

fwVersionMapEntry row .1.3.6.1.4.1.42229.1.2.9.4.1.1

Entry of fwVersionMapTable

Indexes

softwareloadSwloadId fwVersionMapDeviceName

Column	Syntax	OID
fwVersionMapDeviceName Indicates the name of the device.	CoriantFileSwTypesDeviceName Type Constraints: range: 0..64	.1.3.6.1.4.1.42229.1.2.9.4.1.1.1
fwVersionMapDeviceFwVersion Indicates the version of the firmware.	CoriantFileSwTypesDeviceFwVersion Type Constraints: range: 0..64	.1.3.6.1.4.1.42229.1.2.9.4.1.1.2

currentFwVersionTable

table

.1.3.6.1.4.1.42229.1.2.9.5.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk currentFwVersionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::currentFwVersionTable'

Copy

The firmware information of the upgradable devices included in the software load.

currentFwVersionEntry row .1.3.6.1.4.1.42229.1.2.9.5.1.1

Entry of currentFwVersionTable

Indexes

currentFwVersionEquipmentEntity currentFwVersionDeviceName

Column	Syntax	OID
currentFwVersionEquipmentEntity Indicates the entity of the equipment carrying the device.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.9.5.1.1.1
currentFwVersionFwEquipmentType Indicates the type of the equipment carrying the device.	CoriantTypesEquipmentType Type Values: 0 empty 1 filled 2 reserved 3 unrecognized 4 notApplicable 11 fan 12 psu 13 chm1 14 chm2 15 bfm 16 xtm2 17 chm1g 18 chm1lh 19 chm2lh 20 utm2 21 qsfp 22 cfp2 23 sfpplus 24 sfp 25 cfp2Dco 100 occ2 101 omd96 102 paoscofp2 103 pabaofp2 104 pairofp2 105 palrofp2 106 paerofp2 107 bahofp2 109 omd48S 110 omd48O 111 tdcmofp2 112 bauofp2 113 paulrofp2 114 omd8b1ofp2 115 omd8b2ofp2 116 opsofp2 117 otdrofp2 118 ocmofp2 119 opsptofp2 120 chm2t 121 frcu 122 cad8ofp2 123 cad8eofp2 124 omd64 125 ws04sofp2 126 cad16aofp2 127 baxofp2 128 rd09sm 129 omd48e 130 dge2m2ofp2 131 pbmtpp 200 virSim	.1.3.6.1.4.1.42229.1.2.9.5.1.1.2
currentFwVersionDeviceName Indicates the name of the device.	CoriantFileSwTypesDeviceName Type Constraints: range: 0..64	.1.3.6.1.4.1.42229.1.2.9.5.1.1.3
currentFwVersionDeviceFwVersion Indicates the version of the firmware.	CoriantFileSwTypesDeviceFwVersion Type Constraints: range: 0..64	.1.3.6.1.4.1.42229.1.2.9.5.1.1.4
currentFwVersionFwState Indicates firmware state of the device. Current: indicates the loaded firmware is the version of current software load. Not-current: indicates the loaded firmware is not the version of current software load. …	Enumeration Enumerated Values: 0 notAvailable 1 current 2 notCurrent	.1.3.6.1.4.1.42229.1.2.9.5.1.1.5
currentFwVersionSystemFwVersion Indicates the version of the firmware in system appication.	CoriantFileSwTypesDeviceFwVersion Type Constraints: range: 0..64	.1.3.6.1.4.1.42229.1.2.9.5.1.1.6

rollbackPointTable

table

.1.3.6.1.4.1.42229.1.2.9.6.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rollbackPointTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rollbackPointTable'

Copy

Represents a rollback point stored in the system. 
A rollback point represents the system configuration of a specific point in time, that the user may create with the 
'create-rollback-point' command, visualize with the 'diff' command' and rollback to with the 'rollback' command.
The system is able to store up to 10 rollback-points, rolling over old instances as new ones are created.
The incremental IDs of 1..10 are automatically generated by the system whenever the rollback-point is created.
Rollback points can be deleted as any normal object.
A special 'backup' rollback-point can also be created with ID 0; unlike normal rollback-points, this instance will
be kept even after activation with the 'rollback' RPC.

rollbackPointEntry row .1.3.6.1.4.1.42229.1.2.9.6.1.1

Entry of rollbackPointTable

Indexes

rollbackPointId

Column	Syntax	OID
rollbackPointId Integer ID of the rollback-point. Generated dynamically whenever a rollback-point is created, with range 1 to 100	Unsigned32 Constraints: range: 0-10	.1.3.6.1.4.1.42229.1.2.9.6.1.1.1
rollbackPointCreationTime Timestamp when this rollback-point was created	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.9.6.1.1.2
rollbackPointCreationTrigger Describes the author user-name of this rollback-point	CoriantTypesUserName Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.9.6.1.1.3
rollbackPointDescription User defined description of this rollback-point	OctetString Constraints: range: 0-200	.1.3.6.1.4.1.42229.1.2.9.6.1.1.4
rollbackPointType The type of the rollback-point default value :normal	Enumeration Enumerated Values: 1 normal 2 backup	.1.3.6.1.4.1.42229.1.2.9.6.1.1.5

logServerTable

table

.1.3.6.1.4.1.42229.1.2.9.8.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk logServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::logServerTable'

Copy

Grouping the configuration parameters for log forwarding.

logServerEntry row .1.3.6.1.4.1.42229.1.2.9.8.1.1

Entry of logServerTable

Indexes

logServerName

Column	Syntax	OID
logServerName The name for the endpoint to forwarding logs to.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.9.8.1.1.1
logServerIpAddress The leaf uniquely specifies the ipv4 address of the remote host.	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.9.8.1.1.2
logServerTransport It is the transport protocol used when forwarding logs. default value :udp	Enumeration Enumerated Values: 1 tcp 2 udp	.1.3.6.1.4.1.42229.1.2.9.8.1.1.3
logServerPort This leaf specifies the port number used to deliver messages to the remote server. default value :514	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.9.8.1.1.4
logServerDestinationFacilityType Switching of the function destination-facility default value :disabled	CoriantTypesEnableSwitch Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.42229.1.2.9.8.1.1.5
logServerDestinationFacility This leaf specifies the facility used in messages delivered to the remote server. default value :23	OctetString	.1.3.6.1.4.1.42229.1.2.9.8.1.1.6

logFacilityTable

table

.1.3.6.1.4.1.42229.1.2.9.10.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk logFacilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::logFacilityTable'

Copy

NULL

logFacilityEntry row .1.3.6.1.4.1.42229.1.2.9.10.1.1

Entry of logFacilityTable

Indexes

logServerName logFacilityLogSelectorFacility

Column	Syntax	OID
logFacilityLogSelectorFacility The leaf uniquely identifies a syslog facility for forwarding.	Enumeration Enumerated Values: 1 security 2 alarm 3 event 4 configuration 5 cryptoConfiguration 6 cryptoSecurity 7 cryptoEvent 8 cryptoAlarm	.1.3.6.1.4.1.42229.1.2.9.10.1.1.1
logFacilityLogSelectorSeverity The system log selected severity level for forwarding default value :debug	Enumeration Enumerated Values: 0 emergency 1 alert 2 critical 3 error 4 warning 5 notice 6 informational 7 debug	.1.3.6.1.4.1.42229.1.2.9.10.1.1.2
logFacilityCompareOp This leaf describes the option to specify how the severity comparison is performed. default value :equals-or-higher	Enumeration Enumerated Values: 1 equalsOrHigher 2 equals 3 notEquals	.1.3.6.1.4.1.42229.1.2.9.10.1.1.3
logFacilityEnabled The current operational state of the facility. default value :true	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.9.10.1.1.4

ntpAssociationTable

table

.1.3.6.1.4.1.42229.1.2.10.3.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ntpAssociationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ntpAssociationTable'

Copy

NULL

ntpAssociationEntry row .1.3.6.1.4.1.42229.1.2.10.3.1.1

Entry of ntpAssociationTable

Indexes

ntpAssociationSource

Column	Syntax	OID
ntpAssociationSource Indicates the ntp-association-source.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.10.3.1.1.1
ntpAssociationType Indicates the ntp association type. default value :ntp-server	Enumeration Enumerated Values: 1 ntpServer 2 ntpPeer	.1.3.6.1.4.1.42229.1.2.10.3.1.1.2
ntpAssociationPreferredNtpAssociation Indicates if this is preferred.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.10.3.1.1.3
ntpAssociationNtpAdminState The administrative state specifies the permission to use or prohibition against using the resource. default value :up	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.42229.1.2.10.3.1.1.4

ntpAssociationStatusTable

table

.1.3.6.1.4.1.42229.1.2.10.4.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ntpAssociationStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ntpAssociationStatusTable'

Copy

NULL

ntpAssociationStatusEntry row .1.3.6.1.4.1.42229.1.2.10.4.1.1

Entry of ntpAssociationStatusTable

Indexes

ntpAssociationSource

Column	Syntax	OID
ntpAssociationStatusNtpAssociationRefid Reference clock type or address for the peer.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.42229.1.2.10.4.1.1.1
ntpAssociationStatusNtpStratum This attribute indicates the stratum of local clock. A value of 0, indicates that Stratum in Unspecified.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.10.4.1.1.2
ntpAssociationStatusNtpPollingInterval NTP polling interval. This is an integer number indicating the HOST polling interval between transmitted messages, in seconds. UNITS:seconds	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.10.4.1.1.3
ntpAssociationStatusNtpPrecision This is an unsigned floating-point number indicating the precision of the various clocks, in milliseconds. UNITS:milliseconds	OctetString	.1.3.6.1.4.1.42229.1.2.10.4.1.1.4
ntpAssociationStatusNtpAssociationOffset Indicates the offset between the local clock and the superior reference clock. UNITS:milliseconds	OctetString	.1.3.6.1.4.1.42229.1.2.10.4.1.1.5
ntpAssociationStatusNtpAssociationReach Indicates the reachability of the configured server or peer.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.10.4.1.1.6
ntpAssociationStatusNtpAssociationDelay Indicates the delay between the local clock and the superior reference clock, in milliseconds. UNITS:milliseconds	OctetString	.1.3.6.1.4.1.42229.1.2.10.4.1.1.7
ntpAssociationStatusNtpAssociationDispersion Indicates the dispersion between the local clock and the peer clock, in milliseconds. UNITS:milliseconds	OctetString	.1.3.6.1.4.1.42229.1.2.10.4.1.1.8

bitErrorRatePreFecTable

table

.1.3.6.1.4.1.42229.1.2.13.1.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk bitErrorRatePreFecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::bitErrorRatePreFecTable'

Copy

statistics value: average, minimum, maximum and instant value for bit error rate before fec, corresponding to pm parameter BER-FEC

bitErrorRatePreFecEntry row .1.3.6.1.4.1.42229.1.2.13.1.1.1

Entry of bitErrorRatePreFecTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
bitErrorRatePreFecInstant the instant value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.1.1.1.1
bitErrorRatePreFecAvg the average value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.1.1.1.2
bitErrorRatePreFecMin the minimum value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.1.1.1.3
bitErrorRatePreFecMax the maximum value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.1.1.1.4

bitErrorRatePostFecTable

table

.1.3.6.1.4.1.42229.1.2.13.2.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk bitErrorRatePostFecTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::bitErrorRatePostFecTable'

Copy

statistics value: average, minimum, maximum and instant value for bit error rate post fec, corresponding to pm parameter BER-POST-FEC

bitErrorRatePostFecEntry row .1.3.6.1.4.1.42229.1.2.13.2.1.1

Entry of bitErrorRatePostFecTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
bitErrorRatePostFecInstant the instant value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.2.1.1.1
bitErrorRatePostFecAvg the average value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.2.1.1.2
bitErrorRatePostFecMin the minimum value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.2.1.1.3
bitErrorRatePostFecMax the maximum value of statistics counter UNITS:bit-ratio	OctetString	.1.3.6.1.4.1.42229.1.2.13.2.1.1.4

inUtilizationTable

table

.1.3.6.1.4.1.42229.1.2.13.3.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inUtilizationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inUtilizationTable'

Copy

statistics value: average, minimum, maximum and instant value for RX utilization, corresponding to pm parameter Utilization

inUtilizationEntry row .1.3.6.1.4.1.42229.1.2.13.3.1.1

Entry of inUtilizationTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
inUtilizationInstant the instant value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.3.1.1.1
inUtilizationAvg the average value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.3.1.1.2
inUtilizationMin the minimum value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.3.1.1.3
inUtilizationMax the maximum value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.3.1.1.4

outUtilizationTable

table

.1.3.6.1.4.1.42229.1.2.13.4.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk outUtilizationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::outUtilizationTable'

Copy

statistics value: average, minimum, maximum and instant value for TX utilization, corresponding to pm parameter Utilization

outUtilizationEntry row .1.3.6.1.4.1.42229.1.2.13.4.1.1

Entry of outUtilizationTable

Indexes

shelfId slotId subslotId portId subportId

Column	Syntax	OID
outUtilizationInstant the instant value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.4.1.1.1
outUtilizationAvg the average value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.4.1.1.2
outUtilizationMin the minimum value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.4.1.1.3
outUtilizationMax the maximum value of statistics counter	CoriantTypesPercentage Type Constraints: range: 0..100	.1.3.6.1.4.1.42229.1.2.13.4.1.1.4

oduDelayTable

table

.1.3.6.1.4.1.42229.1.2.13.23.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk oduDelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::oduDelayTable'

Copy

statistics value: average, minimum, maximum and instant value for measured odu signal delay, corresponding to pm parameter DELAY

oduDelayEntry row .1.3.6.1.4.1.42229.1.2.13.23.1.1

Entry of oduDelayTable

Indexes

shelfId slotId subslotId portId subportId odutypeL1 oduidL1 odutypeL2 oduidL2 odutypeL3 oduidL3 odutypeL4 oduidL4

Column	Syntax	OID
oduDelayInstant the instant value of statistics counter UNITS:microseconds	OctetString	.1.3.6.1.4.1.42229.1.2.13.23.1.1.1
oduDelayAvg the average value of statistics counter UNITS:microseconds	OctetString	.1.3.6.1.4.1.42229.1.2.13.23.1.1.2
oduDelayMin the minimum value of statistics counter UNITS:microseconds	OctetString	.1.3.6.1.4.1.42229.1.2.13.23.1.1.3
oduDelayMax the maximum value of statistics counter UNITS:microseconds	OctetString	.1.3.6.1.4.1.42229.1.2.13.23.1.1.4

inOpticalPowerTable

table

.1.3.6.1.4.1.42229.1.2.13.24.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inOpticalPowerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inOpticalPowerTable'

Copy

statistics value: average, minimum, maximum and instant value for RX optical power, corresponding to pm parameter OPT

inOpticalPowerEntry row .1.3.6.1.4.1.42229.1.2.13.24.1.1

Entry of inOpticalPowerTable

Indexes

shelfId slotId subslotId portId subportId otsName omsName oscName goptName nmcName

Column	Syntax	OID
inOpticalPowerInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.24.1.1.1
inOpticalPowerAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.24.1.1.2
inOpticalPowerMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.24.1.1.3
inOpticalPowerMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.24.1.1.4

outOpticalPowerTable

table

.1.3.6.1.4.1.42229.1.2.13.25.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk outOpticalPowerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::outOpticalPowerTable'

Copy

statistics value: average, minimum, maximum and instant value for TX optical power, corresponding to pm parameter OPR

outOpticalPowerEntry row .1.3.6.1.4.1.42229.1.2.13.25.1.1

Entry of outOpticalPowerTable

Indexes

shelfId slotId subslotId portId subportId otsName omsName oscName goptName nmcName

Column	Syntax	OID
outOpticalPowerInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.25.1.1.1
outOpticalPowerAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.25.1.1.2
outOpticalPowerMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.25.1.1.3
outOpticalPowerMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.25.1.1.4

differentialGroupDelayTable

table

.1.3.6.1.4.1.42229.1.2.13.26.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk differentialGroupDelayTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::differentialGroupDelayTable'

Copy

statistics value: average, minimum, maximum and instant value for differential group delay, corresponding to pm parameter DGD

differentialGroupDelayEntry row .1.3.6.1.4.1.42229.1.2.13.26.1.1

Entry of differentialGroupDelayTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
differentialGroupDelayInstant the instant value of statistics counter UNITS:ps	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.26.1.1.1
differentialGroupDelayAvg the average value of statistics counter UNITS:ps	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.26.1.1.2
differentialGroupDelayMin the minimum value of statistics counter UNITS:ps	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.26.1.1.3
differentialGroupDelayMax the maximum value of statistics counter UNITS:ps	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.26.1.1.4

chromaticDispersionTable

table

.1.3.6.1.4.1.42229.1.2.13.27.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk chromaticDispersionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::chromaticDispersionTable'

Copy

statistics value: average, minimum, maximum and instant value for chromatic dispersion, corresponding to pm parameter CD

chromaticDispersionEntry row .1.3.6.1.4.1.42229.1.2.13.27.1.1

Entry of chromaticDispersionTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
chromaticDispersionInstant the instant value of statistics counter UNITS:ps/nm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.13.27.1.1.1
chromaticDispersionAvg the average value of statistics counter UNITS:ps/pm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.13.27.1.1.2
chromaticDispersionMin the minimum value of statistics counter UNITS:ps/pm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.13.27.1.1.3
chromaticDispersionMax the maximum value of statistics counter UNITS:ps/pm	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.13.27.1.1.4

osnrTable

table

.1.3.6.1.4.1.42229.1.2.13.28.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk osnrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::osnrTable'

Copy

statistics value: average, minimum, maximum and instant value for osnr, corresponding to pm parameter OSNR

osnrEntry row .1.3.6.1.4.1.42229.1.2.13.28.1.1

Entry of osnrTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
osnrInstant the instant value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.28.1.1.1
osnrAvg the average value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.28.1.1.2
osnrMin the minimum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.28.1.1.3
osnrMax the maximum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.28.1.1.4

qFactorTable

table

.1.3.6.1.4.1.42229.1.2.13.29.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk qFactorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::qFactorTable'

Copy

statistics value: average, minimum, maximum and instant value for q-factor, corresponding to pm parameter Q-factor

qFactorEntry row .1.3.6.1.4.1.42229.1.2.13.29.1.1

Entry of qFactorTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
qFactorInstant the instant value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.29.1.1.1
qFactorAvg the average value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.29.1.1.2
qFactorMin the minimum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.29.1.1.3
qFactorMax the maximum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.29.1.1.4

polarizationDependentLossTable

table

.1.3.6.1.4.1.42229.1.2.13.30.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk polarizationDependentLossTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::polarizationDependentLossTable'

Copy

statistics value: average, minimum, maximum and instant value for polarization dependent loss, corresponding to pm parameter PDL

polarizationDependentLossEntry row .1.3.6.1.4.1.42229.1.2.13.30.1.1

Entry of polarizationDependentLossTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
polarizationDependentLossInstant the instant value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.30.1.1.1
polarizationDependentLossAvg the average value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.30.1.1.2
polarizationDependentLossMin the minimum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.30.1.1.3
polarizationDependentLossMax the maximum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.30.1.1.4

inOpticalFrequencyTable

table

.1.3.6.1.4.1.42229.1.2.13.31.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inOpticalFrequencyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inOpticalFrequencyTable'

Copy

statistics value: average, minimum, maximum and instant value for RX optical frequency, corresponding to pm parameter OFT

inOpticalFrequencyEntry row .1.3.6.1.4.1.42229.1.2.13.31.1.1

Entry of inOpticalFrequencyTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
inOpticalFrequencyInstant the instant value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.31.1.1.1
inOpticalFrequencyAvg the average value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.31.1.1.2
inOpticalFrequencyMin the minimum value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.31.1.1.3
inOpticalFrequencyMax the maximum value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.31.1.1.4

outOpticalFrequencyTable

table

.1.3.6.1.4.1.42229.1.2.13.32.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk outOpticalFrequencyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::outOpticalFrequencyTable'

Copy

statistics value: average, minimum, maximum and instant value for TX optical frequency, corresponding to pm parameter OFR

outOpticalFrequencyEntry row .1.3.6.1.4.1.42229.1.2.13.32.1.1

Entry of outOpticalFrequencyTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
outOpticalFrequencyInstant the instant value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.32.1.1.1
outOpticalFrequencyAvg the average value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.32.1.1.2
outOpticalFrequencyMin the minimum value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.32.1.1.3
outOpticalFrequencyMax the maximum value of statistics counter UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.32.1.1.4

inOpticalPowerLaneHighTable

table

.1.3.6.1.4.1.42229.1.2.13.33.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inOpticalPowerLaneHighTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inOpticalPowerLaneHighTable'

Copy

statistics value: average, minimum, maximum and instant value for highest value of RX lane optical power, corresponding to pm parameter OPR-lane-high

inOpticalPowerLaneHighEntry row .1.3.6.1.4.1.42229.1.2.13.33.1.1

Entry of inOpticalPowerLaneHighTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
inOpticalPowerLaneHighInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.33.1.1.1
inOpticalPowerLaneHighAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.33.1.1.2
inOpticalPowerLaneHighMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.33.1.1.3
inOpticalPowerLaneHighMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.33.1.1.4

inOpticalPowerLaneLowTable

table

.1.3.6.1.4.1.42229.1.2.13.34.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inOpticalPowerLaneLowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inOpticalPowerLaneLowTable'

Copy

statistics value: average, minimum, maximum and instant value for lowest value of RX lane optical power, corresponding to pm parameter OPR-lane-low

inOpticalPowerLaneLowEntry row .1.3.6.1.4.1.42229.1.2.13.34.1.1

Entry of inOpticalPowerLaneLowTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
inOpticalPowerLaneLowInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.34.1.1.1
inOpticalPowerLaneLowAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.34.1.1.2
inOpticalPowerLaneLowMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.34.1.1.3
inOpticalPowerLaneLowMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.34.1.1.4

inOpticalPowerLaneTotalTable

table

.1.3.6.1.4.1.42229.1.2.13.35.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inOpticalPowerLaneTotalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inOpticalPowerLaneTotalTable'

Copy

statistics value: average, minimum, maximum and instant value for total value of RX lane optical power, corresponding to pm parameter OPR-lane-total

inOpticalPowerLaneTotalEntry row .1.3.6.1.4.1.42229.1.2.13.35.1.1

Entry of inOpticalPowerLaneTotalTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
inOpticalPowerLaneTotalInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.35.1.1.1
inOpticalPowerLaneTotalAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.35.1.1.2
inOpticalPowerLaneTotalMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.35.1.1.3
inOpticalPowerLaneTotalMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.35.1.1.4

outOpticalPowerLaneHighTable

table

.1.3.6.1.4.1.42229.1.2.13.36.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk outOpticalPowerLaneHighTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::outOpticalPowerLaneHighTable'

Copy

statistics value: average, minimum, maximum and instant value for highest value of TX lane optical power, corresponding to pm parameter OPR-lane-high

outOpticalPowerLaneHighEntry row .1.3.6.1.4.1.42229.1.2.13.36.1.1

Entry of outOpticalPowerLaneHighTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
outOpticalPowerLaneHighInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.36.1.1.1
outOpticalPowerLaneHighAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.36.1.1.2
outOpticalPowerLaneHighMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.36.1.1.3
outOpticalPowerLaneHighMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.36.1.1.4

outOpticalPowerLaneLowTable

table

.1.3.6.1.4.1.42229.1.2.13.37.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk outOpticalPowerLaneLowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::outOpticalPowerLaneLowTable'

Copy

statistics value: average, minimum, maximum and instant value for lowest value of TX lane optical power, corresponding to pm parameter OPR-lane-low

outOpticalPowerLaneLowEntry row .1.3.6.1.4.1.42229.1.2.13.37.1.1

Entry of outOpticalPowerLaneLowTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
outOpticalPowerLaneLowInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.37.1.1.1
outOpticalPowerLaneLowAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.37.1.1.2
outOpticalPowerLaneLowMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.37.1.1.3
outOpticalPowerLaneLowMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.37.1.1.4

outOpticalPowerLaneTotalTable

table

.1.3.6.1.4.1.42229.1.2.13.38.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk outOpticalPowerLaneTotalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::outOpticalPowerLaneTotalTable'

Copy

statistics value: average, minimum, maximum and instant value for total value of TX lane optical power, corresponding to pm parameter OPR-lane-total

outOpticalPowerLaneTotalEntry row .1.3.6.1.4.1.42229.1.2.13.38.1.1

Entry of outOpticalPowerLaneTotalTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
outOpticalPowerLaneTotalInstant the instant value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.38.1.1.1
outOpticalPowerLaneTotalAvg the average value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.38.1.1.2
outOpticalPowerLaneTotalMin the minimum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.38.1.1.3
outOpticalPowerLaneTotalMax the maximum value of statistics counter	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.13.38.1.1.4

moduleTemperatureTable

table

.1.3.6.1.4.1.42229.1.2.13.39.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk moduleTemperatureTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::moduleTemperatureTable'

Copy

statistics value: average, minimum, maximum and instant value for module temperature, corresponding to pm parameter T-module

moduleTemperatureEntry row .1.3.6.1.4.1.42229.1.2.13.39.1.1

Entry of moduleTemperatureTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
moduleTemperatureInstant the instant value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.39.1.1.1
moduleTemperatureAvg the average value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.39.1.1.2
moduleTemperatureMin the minimum value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.39.1.1.3
moduleTemperatureMax the maximum value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.39.1.1.4

inletTemperatureTable

table

.1.3.6.1.4.1.42229.1.2.13.40.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk inletTemperatureTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::inletTemperatureTable'

Copy

statistics value: average, minimum, maximum and instant value for inlet temperature, corresponding to pm parameter T-inlet

inletTemperatureEntry row .1.3.6.1.4.1.42229.1.2.13.40.1.1

Entry of inletTemperatureTable

Indexes

shelfId

Column	Syntax	OID
inletTemperatureInstant the instant value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.40.1.1.1
inletTemperatureAvg the average value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.40.1.1.2
inletTemperatureMin the minimum value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.40.1.1.3
inletTemperatureMax the maximum value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.40.1.1.4

outletTemperatureTable

table

.1.3.6.1.4.1.42229.1.2.13.41.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk outletTemperatureTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::outletTemperatureTable'

Copy

statistics value: average, minimum, maximum and instant value for outlet temperature, corresponding to pm parameter T-outlet

outletTemperatureEntry row .1.3.6.1.4.1.42229.1.2.13.41.1.1

Entry of outletTemperatureTable

Indexes

shelfId

Column	Syntax	OID
outletTemperatureInstant the instant value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.41.1.1.1
outletTemperatureAvg the average value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.41.1.1.2
outletTemperatureMin the minimum value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.41.1.1.3
outletTemperatureMax the maximum value of statistics counter	CoriantTypesTemperaturePrecision3	.1.3.6.1.4.1.42229.1.2.13.41.1.1.4

opticalReturnLossTable

table

.1.3.6.1.4.1.42229.1.2.13.42.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk opticalReturnLossTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::opticalReturnLossTable'

Copy

statistics value: average, minimum, maximum and instant value for return loss, corresponding to pm parameter ORL

opticalReturnLossEntry row .1.3.6.1.4.1.42229.1.2.13.42.1.1

Entry of opticalReturnLossTable

Indexes

omsName

Column	Syntax	OID
opticalReturnLossInstant the instant value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.42.1.1.1
opticalReturnLossAvg the average value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.42.1.1.2
opticalReturnLossMin the minimum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.42.1.1.3
opticalReturnLossMax the maximum value of statistics counter	CoriantTypesDBPrecision1	.1.3.6.1.4.1.42229.1.2.13.42.1.1.4

sopChangeRateTable

table

.1.3.6.1.4.1.42229.1.2.13.43.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk sopChangeRateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::sopChangeRateTable'

Copy

statistics value: average, minimum, maximum and instant value for SOP change rate, corresponding to pm parameter SOP

sopChangeRateEntry row .1.3.6.1.4.1.42229.1.2.13.43.1.1

Entry of sopChangeRateTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
sopChangeRateInstant the instant value of statistics counter UNITS:rads/s	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.43.1.1.1
sopChangeRateAvg the average value of statistics counter UNITS:rads/s	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.43.1.1.2
sopChangeRateMin the minimum value of statistics counter UNITS:rads/s	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.43.1.1.3
sopChangeRateMax the maximum value of statistics counter UNITS:rads/s	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.13.43.1.1.4

rawDataTable

table

.1.3.6.1.4.1.42229.1.2.15.1.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rawDataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rawDataTable'

Copy

Contains ocm raw measure data.

rawDataEntry row .1.3.6.1.4.1.42229.1.2.15.1.1.1

Entry of rawDataTable

Indexes

shelfId slotId subslotId portId

Column	Syntax	OID
rawDataRefreshCounter count the ocm-raw-data refreshed times. default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.15.1.1.1.1
rawDataValidNum Number of valid ocm-raw-data list. Example, if this values is 10, means only the key index-id 0..9 is valid. default value :0	Unsigned32 Constraints: range: 0-136	.1.3.6.1.4.1.42229.1.2.15.1.1.1.2

rawDataListTable

table

.1.3.6.1.4.1.42229.1.2.15.2.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rawDataListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rawDataListTable'

Copy

Kinds of raw measure data reported from ocm.

rawDataListEntry row .1.3.6.1.4.1.42229.1.2.15.2.1.1

Entry of rawDataListTable

Indexes

shelfId slotId subslotId portId rawDataListIndexId

Column	Syntax	OID
rawDataListIndexId Integer ID of the ocm-raw-data.	Unsigned32 Constraints: range: 0-135	.1.3.6.1.4.1.42229.1.2.15.2.1.1.1
rawDataListOchId Use target frequency as och id, the id is defined to uniquely identify the och optical interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.15.2.1.1.2
rawDataListNmcId The id is defined to uniquely identify the nmc optical interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.15.2.1.1.3
rawDataListActualOpticalPower Actual optical power.	CoriantTypesOpticalPower	.1.3.6.1.4.1.42229.1.2.15.2.1.1.4
rawDataListChannelFrequency channel center frequency. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.15.2.1.1.5
rawDataListActualChannelFrequency Actual channel center frequency. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.15.2.1.1.6
rawDataListActualChannelWidth Actual channel width with unit MHz. UNITS:MHz	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.15.2.1.1.7
rawDataListActualChannelRange Actual channel range.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.15.2.1.1.8
rawDataListActualChannelOsnr Actual channel Optical Signal Noise Ratio.	CoriantTypesOpticalDB	.1.3.6.1.4.1.42229.1.2.15.2.1.1.9
rawDataListHighPowerAttenuation the attenuation value for nmc high power UNITS:dB default value :99	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.15.2.1.1.10
rawDataListHighPowerStatus nmc high power state default value :99	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.42229.1.2.15.2.1.1.11

wssActualVoaTable

table

.1.3.6.1.4.1.42229.1.2.16.2.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk wssActualVoaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::wssActualVoaTable'

Copy

NULL

wssActualVoaEntry row .1.3.6.1.4.1.42229.1.2.16.2.1.1

Entry of wssActualVoaTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
wssActualVoaTriggerCounter used to trigger callback default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.16.2.1.1.1
wssActualVoaNmcTotalNumber used to record the total number of nmcs whose voa change default value :0	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.16.2.1.1.2
wssActualVoaDirectionType the direction of voa configure for nmc default value :not-available	Enumeration Enumerated Values: 0 notAvailable 1 input 2 output 3 bidirection	.1.3.6.1.4.1.42229.1.2.16.2.1.1.3

nmcActualVoaTable

table

.1.3.6.1.4.1.42229.1.2.16.3.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk nmcActualVoaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::nmcActualVoaTable'

Copy

Kinds of nmc voa reported from wss.

nmcActualVoaEntry row .1.3.6.1.4.1.42229.1.2.16.3.1.1

Entry of nmcActualVoaTable

Indexes

shelfId slotId subslotId nmcTargetVoaNmcTmpId

Column	Syntax	OID
nmcActualVoaNmcTmpId NULL	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.16.3.1.1.1
nmcActualVoaNmcId	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.16.3.1.1.2
nmcActualVoaInputAttenuation the voa value for nmc input direction UNITS:dB default value :0.0	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.16.3.1.1.3
nmcActualVoaOutputAttenuation the voa value for nmc output direction UNITS:dB default value :0.0	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.16.3.1.1.4

wssTargetVoaTable

table

.1.3.6.1.4.1.42229.1.2.16.4.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk wssTargetVoaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::wssTargetVoaTable'

Copy

NULL

wssTargetVoaEntry row .1.3.6.1.4.1.42229.1.2.16.4.1.1

Entry of wssTargetVoaTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
wssTargetVoaTriggerCounter used to trigger callback default value :0	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.16.4.1.1.1
wssTargetVoaNmcTotalNumber used to record the total number of nmcs whose voa change default value :0	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.42229.1.2.16.4.1.1.2
wssTargetVoaDirectionType the direction of voa configure for nmc default value :not-available	Enumeration Enumerated Values: 0 notAvailable 1 input 2 output 3 bidirection	.1.3.6.1.4.1.42229.1.2.16.4.1.1.3

nmcTargetVoaTable

table

.1.3.6.1.4.1.42229.1.2.16.5.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk nmcTargetVoaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::nmcTargetVoaTable'

Copy

Kinds of nmc voa reported from wss.

nmcTargetVoaEntry row .1.3.6.1.4.1.42229.1.2.16.5.1.1

Entry of nmcTargetVoaTable

Indexes

shelfId slotId subslotId nmcTargetVoaNmcTmpId

Column	Syntax	OID
nmcTargetVoaNmcTmpId NULL	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.16.5.1.1.1
nmcTargetVoaNmcId	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.16.5.1.1.2
nmcTargetVoaInputAttenuation the voa value for nmc input direction UNITS:dB default value :0.0	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.16.5.1.1.3
nmcTargetVoaOutputAttenuation the voa value for nmc output direction UNITS:dB default value :0.0	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.16.5.1.1.4

nmcReferenceTable

table

.1.3.6.1.4.1.42229.1.2.16.6.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk nmcReferenceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::nmcReferenceTable'

Copy

Represents the Network Media Channel (NMC) MO

nmcReferenceEntry row .1.3.6.1.4.1.42229.1.2.16.6.1.1

Entry of nmcReferenceTable

Indexes

nmcReferenceId

Column	Syntax	OID
nmcReferenceId NULL	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.16.6.1.1.1
nmcReferenceOcmNmcSourceRefId Record the nbi nmc ref id in the ocm nmc which used to mapping to NBI NMC.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.16.6.1.1.2

ochReferenceTable

table

.1.3.6.1.4.1.42229.1.2.16.7.1 · 1 row entry · 6 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk ochReferenceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::ochReferenceTable'

Copy

Represents the Optical Channel (OCH) MO

ochReferenceEntry row .1.3.6.1.4.1.42229.1.2.16.7.1.1

Entry of ochReferenceTable

Indexes

ochReferenceOchName

Column	Syntax	OID
ochReferenceOchName The name is defined to uniquely identify the och optical interface.	CoriantTypesNameIdentifier Type Constraints: range: 1..32	.1.3.6.1.4.1.42229.1.2.16.7.1.1.1
ochReferenceOchFrequency Frequency of the channel with unit MHz. UNITS:MHz	Unsigned32 Constraints: range: 0-0 range: 191300000-196125000	.1.3.6.1.4.1.42229.1.2.16.7.1.1.2
ochReferenceOchWidth Wavelength of the channel with unit nm. UNITS:nm	OctetString	.1.3.6.1.4.1.42229.1.2.16.7.1.1.3
ochReferenceMaxAttenuation the voa value for nmc input direction UNITS:dB default value :0.0	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.16.7.1.1.4
ochReferenceTargetAttenuation the voa value for nmc input direction UNITS:dB default value :0.0	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.16.7.1.1.5
ochReferenceActualAttenuation the voa value for nmc input direction UNITS:dB default value :0.0	CoriantTypesDecimalFract2	.1.3.6.1.4.1.42229.1.2.16.7.1.1.6

sensorGroupTable

table

.1.3.6.1.4.1.42229.1.2.19.3.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk sensorGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::sensorGroupTable'

Copy

List of telemetry sensory groups on the local
system, where a sensor grouping represents a resuable
grouping of multiple paths and exclude filters.

sensorGroupEntry row .1.3.6.1.4.1.42229.1.2.19.3.1.1

Entry of sensorGroupTable

Indexes

sensorGroupId

Column	Syntax	OID
sensorGroupId Name or identifier for the sensor group itself. Will be referenced by other configuration specifying a sensor group	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.19.3.1.1.1

sensorPathTable

table

.1.3.6.1.4.1.42229.1.2.19.5.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk sensorPathTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::sensorPathTable'

Copy

List of paths in the model which together
comprise a sensor grouping. Filters for each path
to exclude items are also provided.

sensorPathEntry row .1.3.6.1.4.1.42229.1.2.19.5.1.1

Entry of sensorPathTable

Indexes

sensorGroupId sensorPathIndex

Column	Syntax	OID
sensorPathIndex index for sensor-path	OctetString Constraints: range: 1-320	.1.3.6.1.4.1.42229.1.2.19.5.1.1.1
sensorPathModelPath Path to a section of operational state of interest (the sensor).	OctetString	.1.3.6.1.4.1.42229.1.2.19.5.1.1.2
sensorPathExcludeFilter Filter to exclude certain values out of the state values	OctetString	.1.3.6.1.4.1.42229.1.2.19.5.1.1.3

destinationGroupTable

table

.1.3.6.1.4.1.42229.1.2.19.7.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk destinationGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::destinationGroupTable'

Copy

List of destination-groups. Destination groups allow the
reuse of common telemetry destinations across the
telemetry configuration. An operator references a
set of destinations via the configurable
destination-group-identifier.
A destination group may contain one or more telemetry
destinations

destinationGroupEntry row .1.3.6.1.4.1.42229.1.2.19.7.1.1

Entry of destinationGroupTable

Indexes

destinationGroupGroupId

Column	Syntax	OID
destinationGroupGroupId Unique identifier for the destination group	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.19.7.1.1.1

destinationTable

table

.1.3.6.1.4.1.42229.1.2.19.9.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk destinationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::destinationTable'

Copy

List of telemetry stream destinations

destinationEntry row .1.3.6.1.4.1.42229.1.2.19.9.1.1

Entry of destinationTable

Indexes

destinationGroupGroupId destinationAddress destinationPort

Column	Syntax	OID
destinationAddress IP address of the telemetry stream destination	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.19.9.1.1.1
destinationPort Protocol (udp or tcp) port number for the telemetry stream destination	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.19.9.1.1.2

dialOutSubscriptionTable

table

.1.3.6.1.4.1.42229.1.2.19.12.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk dialOutSubscriptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::dialOutSubscriptionTable'

Copy

List of telemetry subscriptions. A telemetry
subscription consists of a set of collection
destinations, stream attributes, and associated paths to
state information in the model (sensor data)

dialOutSubscriptionEntry row .1.3.6.1.4.1.42229.1.2.19.12.1.1

Entry of dialOutSubscriptionTable

Indexes

dialOutSubscriptionSubscriptionName

Column	Syntax	OID
dialOutSubscriptionStartStreamingTime The time of the subscription first streaming data packet send out. If the time is default value the packet will send immediately after subscription setting completed. If the time is passed the packet will send out at t…	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.19.12.1.1.1
dialOutSubscriptionStreamingDataModel The stream out data based on selected model default value :Device-model	Enumeration Enumerated Values: 1 auto 2 deviceModel 3 openconfig 4 openroadm	.1.3.6.1.4.1.42229.1.2.19.12.1.1.2
dialOutSubscriptionSubscriptionName User configured identifier of the telemetry subscription. This value is used primarily for subscriptions configured locally on the network element.	OctetString Constraints: range: 1-128	.1.3.6.1.4.1.42229.1.2.19.12.1.1.3
dialOutSubscriptionSubscriptionId System generated identifer of the telemetry subscription.	OctetString	.1.3.6.1.4.1.42229.1.2.19.12.1.1.4
dialOutSubscriptionLocalSourceAddress The IP address which will be the source of packets from the device to a telemetry collector destination. default value :auto	OctetString	.1.3.6.1.4.1.42229.1.2.19.12.1.1.5
dialOutSubscriptionOriginatedQosMarking DSCP marking of packets generated by the telemetry subsystem on the network device. default value :0	IetfInetTypesDscp Type Constraints: range: 0..63	.1.3.6.1.4.1.42229.1.2.19.12.1.1.6
dialOutSubscriptionProtocol Selection of the transport protocol for the telemetry stream. default value :GRPC	Enumeration Enumerated Values: 1 ssh 2 grpc 3 jsonRpc 4 websocketRpc	.1.3.6.1.4.1.42229.1.2.19.12.1.1.7
dialOutSubscriptionEncoding Selection of the specific encoding or RPC framework for telemetry messages to and from the network element. default value :JSON_IETF	Enumeration Enumerated Values: 1 xml 2 jsonIetf 3 proto3	.1.3.6.1.4.1.42229.1.2.19.12.1.1.8

sensorProfileTable

table

.1.3.6.1.4.1.42229.1.2.19.14.1 · 1 row entry · 4 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk sensorProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::sensorProfileTable'

Copy

List of telemetry sensor groups used
in the subscription

sensorProfileEntry row .1.3.6.1.4.1.42229.1.2.19.14.1.1

Entry of sensorProfileTable

Indexes

dialOutSubscriptionSubscriptionName

Column	Syntax	OID
sensorProfileSensorGroup Reference to the sensor group which is used in the profile	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.19.14.1.1.1
sensorProfileSampleInterval Time in milliseconds between the device's sample of a telemetry data source. For example, setting this to 2000 would require the local device to collect the telemetry data every 2000 milliseconds. There can be latency o…	OctetString	.1.3.6.1.4.1.42229.1.2.19.14.1.1.2
sensorProfileHeartbeatInterval Maximum time interval in milliseconds that may pass between updates from a device to a telemetry collector. If this interval expires, but there is no updated data to send (such as if suppress_updates has been configured…	OctetString	.1.3.6.1.4.1.42229.1.2.19.14.1.1.3
sensorProfileSuppressRedundant Boolean flag to control suppression of redundant telemetry updates to the collector platform. If this flag is set to TRUE, then the collector will only send an update at the configured interval if a subscribed data valu…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.19.14.1.1.4

destinationProfileTable

table

.1.3.6.1.4.1.42229.1.2.19.16.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk destinationProfileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::destinationProfileTable'

Copy

Identifier of the previously defined destination
group

destinationProfileEntry row .1.3.6.1.4.1.42229.1.2.19.16.1.1

Entry of destinationProfileTable

Indexes

dialOutSubscriptionSubscriptionName destinationProfileGroupId

Column	Syntax	OID
destinationProfileGroupId The destination group id references a reusable group of destination addresses and ports for the telemetry stream.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.19.16.1.1.1

dialInSubscriptionTable

table

.1.3.6.1.4.1.42229.1.2.19.18.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk dialInSubscriptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::dialInSubscriptionTable'

Copy

List representation of telemetry subscriptions that
are configured via an inline RPC, otherwise known
as dynamic telemetry subscriptions.

dialInSubscriptionEntry row .1.3.6.1.4.1.42229.1.2.19.18.1.1

Entry of dialInSubscriptionTable

Indexes

dialInSubscriptionSubscriptionId

Column	Syntax	OID
dialInSubscriptionSubscriptionId Reference to the identifier of the subscription itself. The id will be the handle to refer to the subscription once created	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.42229.1.2.19.18.1.1.1

stateDialInSubscriptionTable

table

.1.3.6.1.4.1.42229.1.2.19.19.1 · 1 row entry · 8 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk stateDialInSubscriptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::stateDialInSubscriptionTable'

Copy

State information relating to dynamic telemetry
subscriptions.

stateDialInSubscriptionEntry row .1.3.6.1.4.1.42229.1.2.19.19.1.1

Entry of stateDialInSubscriptionTable

Indexes

dialInSubscriptionSubscriptionId

Column	Syntax	OID
stateDialInSubscriptionSubscriptionId System generated identifer of the telemetry subscription.	OctetString	.1.3.6.1.4.1.42229.1.2.19.19.1.1.1
stateDialInSubscriptionDestinationAddress IP address of the telemetry stream destination	IetfInetTypesIpAddress	.1.3.6.1.4.1.42229.1.2.19.19.1.1.2
stateDialInSubscriptionDestinationPort Protocol (udp or tcp) port number for the telemetry stream destination	IetfInetTypesPortNumber Type Constraints: range: 0..65535	.1.3.6.1.4.1.42229.1.2.19.19.1.1.3
stateDialInSubscriptionSampleInterval Time in milliseconds between the device's sample of a telemetry data source. For example, setting this to 2000 would require the local device to collect the telemetry data every 2000 milliseconds. There can be latency o…	OctetString	.1.3.6.1.4.1.42229.1.2.19.19.1.1.4
stateDialInSubscriptionHeartbeatInterval Maximum time interval in milliseconds that may pass between updates from a device to a telemetry collector. If this interval expires, but there is no updated data to send (such as if suppress_updates has been configured…	OctetString	.1.3.6.1.4.1.42229.1.2.19.19.1.1.5
stateDialInSubscriptionSuppressRedundant Boolean flag to control suppression of redundant telemetry updates to the collector platform. If this flag is set to TRUE, then the collector will only send an update at the configured interval if a subscribed data valu…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.19.19.1.1.6
stateDialInSubscriptionProtocol Selection of the transport protocol for the telemetry stream. default value :GRPC	Enumeration Enumerated Values: 1 ssh 2 grpc 3 jsonRpc 4 websocketRpc	.1.3.6.1.4.1.42229.1.2.19.19.1.1.7
stateDialInSubscriptionEncoding Selection of the specific encoding or RPC framework for telemetry messages to and from the network element. default value :JSON_IETF	Enumeration Enumerated Values: 1 xml 2 jsonIetf 3 proto3	.1.3.6.1.4.1.42229.1.2.19.19.1.1.8

dialInSensorPathTable

table

.1.3.6.1.4.1.42229.1.2.19.21.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk dialInSensorPathTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::dialInSensorPathTable'

Copy

List of paths in the model which together
comprise a sensor grouping. Filters for each path
to exclude items are also provided.

dialInSensorPathEntry row .1.3.6.1.4.1.42229.1.2.19.21.1.1

Entry of dialInSensorPathTable

Indexes

dialInSubscriptionSubscriptionId dialInSensorPathPath

Column	Syntax	OID
dialInSensorPathPath Reference to the path of interest	OctetString Constraints: range: 0-320	.1.3.6.1.4.1.42229.1.2.19.21.1.1.1

pathStateTable

table

.1.3.6.1.4.1.42229.1.2.19.22.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk pathStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::pathStateTable'

Copy

State information for a dynamic subscription
paths of interest

pathStateEntry row .1.3.6.1.4.1.42229.1.2.19.22.1.1

Entry of pathStateTable

Indexes

dialInSubscriptionSubscriptionId dialInSensorPathPath

Column	Syntax	OID
pathStateModelPath Path to a section of operational state of interest (the sensor).	OctetString	.1.3.6.1.4.1.42229.1.2.19.22.1.1.1
pathStateExcludeFilter Filter to exclude certain values out of the state values	OctetString	.1.3.6.1.4.1.42229.1.2.19.22.1.1.2

rstpBridgeInstanceTable

table

.1.3.6.1.4.1.42229.1.2.20.2.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rstpBridgeInstanceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rstpBridgeInstanceTable'

Copy

rstp bridge instance, max instance = 4

rstpBridgeInstanceEntry row .1.3.6.1.4.1.42229.1.2.20.2.1.1

Entry of rstpBridgeInstanceTable

Indexes

rstpBridgeInstanceBridgeName

Column	Syntax	OID
rstpBridgeInstanceBridgeName unique name of the bridge	OctetString Constraints: range: 1-255	.1.3.6.1.4.1.42229.1.2.20.2.1.1.1

rstpConfigTable

table

.1.3.6.1.4.1.42229.1.2.20.3.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rstpConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rstpConfigTable'

Copy

Collection of rstp configuration attributes

rstpConfigEntry row .1.3.6.1.4.1.42229.1.2.20.3.1.1

Entry of rstpConfigTable

Indexes

rstpBridgeInstanceBridgeName

Column	Syntax	OID
rstpConfigBridgePriority Bridge Priority Value default value :32768	Unsigned32 Constraints: range: 0-61440	.1.3.6.1.4.1.42229.1.2.20.3.1.1.1
rstpConfigShutdown Bridge admin state default value :false	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.20.3.1.1.2
rstpConfigHoldTime The time interval during which no more than two BPDUs transmitted by this node in seconds - not used in rstp mode (in seconds) default value :2	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.42229.1.2.20.3.1.1.3
rstpConfigHelloTime The time between the transmission of BPDU's by this node on any port, when role is root (in seconds) default value :2	Unsigned32 Constraints: range: 1-2	.1.3.6.1.4.1.42229.1.2.20.3.1.1.4
rstpConfigMaxAge The value that all bridges use for MaxAge when this bridge is acting as the root default value :20	Unsigned32 Constraints: range: 6-40	.1.3.6.1.4.1.42229.1.2.20.3.1.1.5
rstpConfigForwardDelay The port on the Switch spends this time in the listening state while moving from the blocking state to the forwarding state (in seconds) default value :15	Unsigned32 Constraints: range: 4-30	.1.3.6.1.4.1.42229.1.2.20.3.1.1.6
rstpConfigTransmitHoldCount Maximum BPDU transmission rate default value :2	Unsigned32 Constraints: range: 1-10	.1.3.6.1.4.1.42229.1.2.20.3.1.1.7

rstpBridgePortTBLTable

table

.1.3.6.1.4.1.42229.1.2.20.4.1 · 1 row entry · 3 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rstpBridgePortTBLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rstpBridgePortTBLTable'

Copy

Table contains port-specific information for rstp config

rstpBridgePortTBLEntry row .1.3.6.1.4.1.42229.1.2.20.4.1.1

Entry of rstpBridgePortTBLTable

Indexes

rstpBridgeInstanceBridgeName rstpBridgePortTBLIfname

Column	Syntax	OID
rstpBridgePortTBLIfname Interface name of the port	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.20.4.1.1.1
rstpBridgePortTBLCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port also default value :20000	Unsigned32 Constraints: range: 2000-200000	.1.3.6.1.4.1.42229.1.2.20.4.1.1.2
rstpBridgePortTBLPriority The value of the priority field default value :128	Unsigned32 Constraints: range: 0-240	.1.3.6.1.4.1.42229.1.2.20.4.1.1.3

rstpBridgeAttrTable

table

.1.3.6.1.4.1.42229.1.2.20.6.1 · 1 row entry · 11 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rstpBridgeAttrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rstpBridgeAttrTable'

Copy

Collection of operational rstp bridge attributes

rstpBridgeAttrEntry row .1.3.6.1.4.1.42229.1.2.20.6.1.1

Entry of rstpBridgeAttrTable

Indexes

rstpBridgeInstanceBridgeName

Column	Syntax	OID
rstpBridgeAttrRootBridgePort Port id of the root port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.1
rstpBridgeAttrRootPathCost The cost of the path to the root as seen from this bridge	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.2
rstpBridgeAttrRootBridgePriority Root Bridge Priority Value	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.3
rstpBridgeAttrRootBridgeId Root Bridge identifier	RstpBridgeIdType Type Constraints: range: 1..255	.1.3.6.1.4.1.42229.1.2.20.6.1.1.4
rstpBridgeAttrRootHoldTime The time interval during which no more than two BPDUs transmitted by this node in seconds at root node (in seconds) UNITS:seconds	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.5
rstpBridgeAttrRootHelloTime The time between the transmission of BPDU's used at root node (in seconds)	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.6
rstpBridgeAttrRootMaxAge The value that all bridges use for MaxAge used at root node UNITS:seconds	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.7
rstpBridgeAttrRootForwardDelay The time in seconds spent on the listening state used at root node (in seconds) UNITS:seconds	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.8
rstpBridgeAttrBridgeId Bridge identifier of the bridge	RstpBridgeIdType Type Constraints: range: 1..255	.1.3.6.1.4.1.42229.1.2.20.6.1.1.9
rstpBridgeAttrTopoChangeCount The total number of topology changes	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.10
rstpBridgeAttrTimeSinceTopoChange Time since last topology changes occurred (in seconds)	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.6.1.1.11

rstpBridgePortStateTBLTable

table

.1.3.6.1.4.1.42229.1.2.20.8.1 · 1 row entry · 7 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk rstpBridgePortStateTBLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::rstpBridgePortStateTBLTable'

Copy

This table contains port-specific information for rstp state attributes

rstpBridgePortStateTBLEntry row .1.3.6.1.4.1.42229.1.2.20.8.1.1

Entry of rstpBridgePortStateTBLTable

Indexes

rstpBridgeInstanceBridgeName rstpBridgePortStateTBLIfname

Column	Syntax	OID
rstpBridgePortStateTBLIfname Interface name of the port	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.42229.1.2.20.8.1.1.1
rstpBridgePortStateTBLBridgePortState The port's current state default value :unknown	Enumeration Enumerated Values: 1 discarding 2 blocked 3 learning 4 forwarding 5 unknown	.1.3.6.1.4.1.42229.1.2.20.8.1.1.2
rstpBridgePortStateTBLBridgePortRole The role payed by this port in the bridge default value :unknown	Enumeration Enumerated Values: 1 designated 2 root 3 alternate 4 disabled 5 backup 6 unknown	.1.3.6.1.4.1.42229.1.2.20.8.1.1.3
rstpBridgePortStateTBLBridgePortId Unique port id of this port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.8.1.1.4
rstpBridgePortStateTBLOperEdgeBridgePort The operational value of the Edge Port parameter	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.42229.1.2.20.8.1.1.5
rstpBridgePortStateTBLDesignatedBridgePort Port id of the designated port	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.42229.1.2.20.8.1.1.6
rstpBridgePortStateTBLDesignatedBridgeid The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment	RstpBridgeIdType Type Constraints: range: 1..255	.1.3.6.1.4.1.42229.1.2.20.8.1.1.7

hmoStatisticsSubcardTable

table

.1.3.6.1.4.1.42229.1.2.21.1.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsSubcardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsSubcardTable'

Copy

NULL

hmoStatisticsSubcardEntry row .1.3.6.1.4.1.42229.1.2.21.1.1.1

Entry of hmoStatisticsSubcardTable

Indexes

shelfId slotId subslotId

Column	Syntax	OID
hmoStatisticsSubcardLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.1.1.1.1

hmoStatisticsCardTable

table

.1.3.6.1.4.1.42229.1.2.21.2.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsCardTable'

Copy

NULL

hmoStatisticsCardEntry row .1.3.6.1.4.1.42229.1.2.21.2.1.1

Entry of hmoStatisticsCardTable

Indexes

shelfId slotId

Column	Syntax	OID
hmoStatisticsCardLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.2.1.1.1

hmoStatisticsShelfTable

table

.1.3.6.1.4.1.42229.1.2.21.3.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsShelfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsShelfTable'

Copy

NULL

hmoStatisticsShelfEntry row .1.3.6.1.4.1.42229.1.2.21.3.1.1

Entry of hmoStatisticsShelfTable

Indexes

shelfId

Column	Syntax	OID
hmoStatisticsShelfLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.3.1.1.1

hmoStatisticsOtsTable

table

.1.3.6.1.4.1.42229.1.2.21.4.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsOtsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsOtsTable'

Copy

NULL

hmoStatisticsOtsEntry row .1.3.6.1.4.1.42229.1.2.21.4.1.1

Entry of hmoStatisticsOtsTable

Indexes

otsName

Column	Syntax	OID
hmoStatisticsOtsLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.4.1.1.1

hmoStatisticsOmsTable

table

.1.3.6.1.4.1.42229.1.2.21.5.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsOmsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsOmsTable'

Copy

NULL

hmoStatisticsOmsEntry row .1.3.6.1.4.1.42229.1.2.21.5.1.1

Entry of hmoStatisticsOmsTable

Indexes

omsName

Column	Syntax	OID
hmoStatisticsOmsLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.5.1.1.1

hmoStatisticsOscTable

table

.1.3.6.1.4.1.42229.1.2.21.6.1 · 1 row entry · 1 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsOscTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsOscTable'

Copy

NULL

hmoStatisticsOscEntry row .1.3.6.1.4.1.42229.1.2.21.6.1.1

Entry of hmoStatisticsOscTable

Indexes

oscName

Column	Syntax	OID
hmoStatisticsOscLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.6.1.1.1

hmoStatisticsGoptTable

table

.1.3.6.1.4.1.42229.1.2.21.7.1 · 1 row entry · 5 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsGoptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsGoptTable'

Copy

NULL

hmoStatisticsGoptEntry row .1.3.6.1.4.1.42229.1.2.21.7.1.1

Entry of hmoStatisticsGoptTable

Indexes

goptName

Column	Syntax	OID
hmoStatisticsGoptLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.7.1.1.1
hmoStatisticsGoptProtectionSwitchDuration Protection Switch Duration, corresponding to pm parameter PSD UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.21.7.1.1.2
hmoStatisticsGoptProtectionSwitchCount Protection Switch Count, corresponding to pm parameter PSC UNITS:times	OctetString	.1.3.6.1.4.1.42229.1.2.21.7.1.1.3
hmoStatisticsGoptLossTx Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.21.7.1.1.4
hmoStatisticsGoptLossRx Loss of Signal Seconds of Receive side, corresponding to pm parameter LOSS-RX UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.21.7.1.1.5

hmoStatisticsNmcTable

table

.1.3.6.1.4.1.42229.1.2.21.8.1 · 1 row entry · 2 columns

Open in standard view Walk table

Uses the coriant variant from /opt/observium/mibs/coriant.

Command help

Walk hmoStatisticsNmcTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CORIANT-GROOVE-MIB' -M '/opt/observium/mibs/coriant:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CORIANT-GROOVE-MIB::hmoStatisticsNmcTable'

Copy

NULL

hmoStatisticsNmcEntry row .1.3.6.1.4.1.42229.1.2.21.8.1.1

Entry of hmoStatisticsNmcTable

Indexes

nmcName

Column	Syntax	OID
hmoStatisticsNmcLastClear The start time of statistics monitor default value :0000-01-01T00:00:00.000Z	IetfYangTypesDateAndTime	.1.3.6.1.4.1.42229.1.2.21.8.1.1.1
hmoStatisticsNmcLossTx Loss of Signal Seconds of Transmit side, corresponding to pm parameter LOSS-TX UNITS:seconds	OctetString	.1.3.6.1.4.1.42229.1.2.21.8.1.1.2