CM-SYSTEM-MIB Table View

A list of entries corresponding to the access control
IP network addresses. Agent provides upto 10 access control
IP network addresses to be configured.  Access is only
'permitted' from these IP network addresses.

aclEntry row .1.3.6.1.4.1.2544.1.12.2.1.4.2.1

An entry containing information applicable to a particular
Access Control IP Network Address that can be configured.

Indexes

aclEntryIndex

Column	Syntax	OID
aclEntryIndex An arbitrary integer index value used to uniquely identify an ACL entry within an ACL. The manager may not assume any particular semantics or meaning to this index, except that it identifies a logical row in the table.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.1
aclEntryFilterAction Whether the network IP address specified by aclEntryNetworkAddress and aclEntryNetworkMask has permission to access the system. Currently, only 'permit' is supported.	CmAclFilterAction Type Values: 1 permit 2 deny	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.2
aclEntryNetworkAddress The network IP address of the entry that will be permitted to access the system.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.3
aclEntryNetworkMask The network IP mask of the entry that will be permitted to access the system.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.4
aclEntryEnabled This enables/disables the entity specified by aclEntryNetworkAddress and aclEntryNetworkMask to access the system.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.5
aclEntryIpVersion This object describe the ip version.	CM-COMMON-MIBIpVersionr/w Type Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.6
aclEntryNetworkIpv6Addr This object describe the ipv6 adress.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.7
aclEntryPrefixLength This object describe the ipv6 Prefix length.	Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2544.1.12.2.1.4.2.1.8

This table lists information about thns.

databaseEntry row .1.3.6.1.4.1.2544.1.12.2.1.6.3.1

A conceptual row in the databaseTable.

Indexes

databaseIndex

Column	Syntax	OID
databaseIndex An arbitrary integer index value used to uniquely identify an entry within the databaseTable.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.2544.1.12.2.1.6.3.1.1
databaseType The type of database partition.	CmVersionType Type Values: 1 active 2 standby 3 staging	.1.3.6.1.4.1.2544.1.12.2.1.6.3.1.2
databaseVersion The database version string.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.2.1.6.3.1.3

This table lists information about the software installed
in the active and standby partitions.

softwareEntry row .1.3.6.1.4.1.2544.1.12.2.1.7.4.1

A conceptual row in the softwareTable.

Indexes

softwareIndex

Column	Syntax	OID
softwareIndex An arbitrary integer index value used to uniquely identify an entry within the softwareTable.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.2544.1.12.2.1.7.4.1.1
softwareType The type of software partition.	CmVersionType Type Values: 1 active 2 standby 3 staging	.1.3.6.1.4.1.2544.1.12.2.1.7.4.1.2
softwareVersion The software version string.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2544.1.12.2.1.7.4.1.3

This table allows configuration of the remote syslog hosts.

sysLogServerEntry row .1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1

A conceptual row in the sysLogServerTable.

Indexes

sysLogServerIndex

Column	Syntax	OID
sysLogServerIndex An integer index value used to uniquely identify an entry within the sysLogServerTable.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.1
sysLogIpAddress IP address of the remote syslog server. Value of 0.0.0.0 indicates the sys log server is not configured.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.2
sysLogPort Optional port address of the remote log server. If not specified, the default port for the standard syslog utility (UDP Port 514) will be used.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.3
sysLogIpVersion This object describe the ip version.	CM-COMMON-MIBIpVersionr/w Type Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.4
sysLogIpv6Addr This object describe the ipv6 address.	IPV6-TCIpv6Addressr/w Type Constraints: range: 16	.1.3.6.1.4.1.2544.1.12.2.1.9.1.1.1.5

This table is an extension of the standard snmpTargetAddrTable(SNMP-TARGET-MIB).
This table is used to manage the SNMP Dying Gasp support.

f3SnmpTargetAddrExtEntry row .1.3.6.1.4.1.2544.1.12.2.1.11.1.1

A conceptual row in the f3SnmpTargetAddrExtTable.

Indexes

SNMP-TARGET-MIBsnmpTargetAddrName

Column	Syntax	OID
f3SnmpTargetAddrExtDyingGaspPort When SNMP Dying Gasp is enabled at Card level, this attribute provides information on the interface (physical port) through which this Target Address is reachable (using Layer 3 ping, trace route).	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.2.1.11.1.1.1
f3SnmpTargetAddrExtDyingGaspEnabled When SNMP Dying Gasp is enabled at Card level, this attribute specifies whether this Target Address entry should be used in the SNMP Dying Gasp TRAP PDU or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.2.1.11.1.1.2
f3SnmpTargetAddrExtDyingGaspActive When SNMP Dying Gasp is enabled at Card level, in case of multiple target addresses resolving to the same interface (port), this flag indicates which target address is used for the SNMP TRAP PDU.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.2.1.11.1.1.3
f3SnmpTargetAddrExtBulkTrapsEnabled Provides ability to enable/disable the Snmp Bulk Traps on the Target Address.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.2.1.11.1.1.4

This table lists information about the configuration files that
are resident on the node.

f3ConfigFileEntry row .1.3.6.1.4.1.2544.1.12.2.1.14.5.1

A conceptual row in the f3ConfigFileTable.

Indexes

f3ConfigFileIndex

Column	Syntax	OID
f3ConfigFileIndex An arbitrary integer index value used to uniquely identify an entry within the f3ConfigFileTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.2.1.14.5.1.1
f3ConfigFileName Name of the configuration file.	OctetString Constraints: range: 0-255	.1.3.6.1.4.1.2544.1.12.2.1.14.5.1.2
f3ConfigFileDescription User description of the configuration file.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.2544.1.12.2.1.14.5.1.3

This table allows ability to manage enabling/disabling system features.

f3SystemFeatureEntry row .1.3.6.1.4.1.2544.1.12.2.1.15.1.1

A conceptual row in the f3SystemFeatureTable.

Indexes

f3SystemFeatureIndex

Column	Syntax	OID
f3SystemFeatureIndex An arbitrary integer index value used to uniquely identify an entry within the f3SystemFeatureTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.2.1.15.1.1.1
f3SystemFeatureName This object provides the name of the system feature.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.2544.1.12.2.1.15.1.1.2
f3SystemFeatureEnabled This object allows system feature control. If a specific feature is disabled, the relevant operations to use that feature are denied.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.2.1.15.1.1.3

This extension table adds a row status to allow user add/delete/edit the LLDP 
Destination Address which is defined to Read-Only in the standard MIB.

f3SystemLldpV2DestAddressADVAExtEntry row .1.3.6.1.4.1.2544.1.12.2.1.16.1.1

A conceptual row in the f3SystemLldpV2DestAddressADVAExtTable.

Indexes

f3SystemLldpV2DestAddressADVAExtIndex

Column	Syntax	OID
f3SystemLldpV2DestAddressADVAExtIndex An arbitrary integer index value used to uniquely identify an entry within the f3SystemLldpV2DestAddressADVAExtTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2544.1.12.2.1.16.1.1.1
f3SystemLldpV2ADVAExtDestMacAddress This attribute description the standard MIB about LLDP Destination Mac Address.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2544.1.12.2.1.16.1.1.2
f3SystemLldpV2DestAddressADVAExtRowStatus The status of this row. The f3SystemLldpV2DestAddressADVAExtRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.2.1.16.1.1.3

This extension table adds a row status to allow user add/delete/edit the LLDP 
Destination Address for one port.

f3SystemLldpV2PortConfigADVAExtEntry row .1.3.6.1.4.1.2544.1.12.2.1.16.2.1

A conceptual row in the f3SystemLldpV2PortConfigADVAExtTable.

Indexes

f3SystemLldpV2PortConfigADVAExtIfIndex f3SystemLldpV2PortConfigADVAExtDestAddressIndex

Column	Syntax	OID
f3SystemLldpV2PortConfigADVAExtIfIndex The interface index value used to identify the port associated with this entry. Its value is an index into the interfaces MIB. The value of this object is used as an index to the f3SystemLldpV2PortConfigA…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2544.1.12.2.1.16.2.1.1
f3SystemLldpV2PortConfigADVAExtDestAddressIndex The index value used to identify the destination MAC address associated with this entry. Its value identifies the row in the lldpV2DestAddressTable where the MAC address can be found. The value of this ob…	LLDP-V2-TC-MIBLldpV2DestAddressTableIndex Type Constraints: range: 1..4096	.1.3.6.1.4.1.2544.1.12.2.1.16.2.1.2
f3SystemLldpV2PortConfigADVAExtAdminStatus The administratively desired status of the local LLDP agent. If the associated f3SystemLldpV2PortConfigADVAExtAdminStatus object is set to a value of 'txOnly(1)', then LLDP agent transmits LLDPframes on t…	Enumerationr/w Enumerated Values: 1 txOnly 2 rxOnly 3 txAndRx 4 disabled	.1.3.6.1.4.1.2544.1.12.2.1.16.2.1.3
f3SystemLldpV2PortConfigADVAExtNotificationEnable The f3SystemLldpV2PortConfigADVAExtNotificationEnable controls, on a per agent basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) m…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.2.1.16.2.1.4
f3SystemLldpV2PortConfigADVAExtTLVsTxEnable The f3SystemLldpV2PortConfigADVAExtTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap correspon…	Bitsr/w Enumerated Values: 0 portDesc 1 sysName 2 sysDesc 3 sysCap	.1.3.6.1.4.1.2544.1.12.2.1.16.2.1.5
f3SystemLldpV2PortConfigADVAExtStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.2.1.16.2.1.6
f3SystemLldpV2PortConfigADVAExtRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.2.1.16.2.1.7

This extension table adds a row status to allow user add/delete/edit the LLDP 
Destination Address for one port.

f3SystemLldpV2ManAddrConfigTxPortsADVAExtEntry row .1.3.6.1.4.1.2544.1.12.2.1.16.3.1

A conceptual row in the f3SystemLldpV2ManAddrConfigTxPortsADVAExtTable.

Indexes

f3SystemLldpV2PortConfigADVAExtIfIndex f3SystemLldpV2PortConfigADVAExtDestAddressIndex f3SystemLldpV2ManAddrConfigTxPortsADVAExtRefInterface

Column	Syntax	OID
f3SystemLldpV2ManAddrConfigTxPortsADVAExtRefInterface This object describe the Tx Port is on what interface, its value should be management tunnel or one dcn or none.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.2544.1.12.2.1.16.3.1.1
f3SystemLldpV2ManAddrConfigTxPortsADVAExtEnable This object describe the interface on Tx Ports whether enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2544.1.12.2.1.16.3.1.2
f3SystemLldpV2ManAddrConfigTxPortsADVAExtStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2544.1.12.2.1.16.3.1.3
f3SystemLldpV2ManAddrConfigTxPortsADVAExtRowStatus The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2544.1.12.2.1.16.3.1.4

This table is an extension of the standard lldpV2RemTable (LLDP-V2-MIB).
This table adds remote TTL attribute support

f3LldpV2RemExtEntry row .1.3.6.1.4.1.2544.1.12.2.1.20.1.1

A conceptual row in the f3LldpV2RemExtTable.

Indexes

No indexes recorded

Column	Syntax	OID
f3LldpV2RemTTL Integer value which indicates the number of seconds that the recipient LLDP agent is to regard the information associated with particular MSAP identifier to be valid	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2544.1.12.2.1.20.1.1.1