CM-GATEWAY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
80

cmGwWanDnsServerTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1.12 · 1 row entry · 4 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwWanDnsServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwWanDnsServerTable' 
When cmGwWanDhcpcAdminStatus is set to enabled, this contains 
the IP addresses used for the WAN DNS hosts 
obtained via the DHCP option 6 during the WAN interface
configuration process.  A maximum of three entries is supported .
          
When cmGwWanDhcpcAdminStatus is set to disabled, this contains 
the IP addresses set by the GUI or NMS. A maximum of three entries are 
supported by GUI and NMS.
cmGwWanDnsServerEntry row .1.3.6.1.4.1.1166.1.19.52.1.1.12.1
List of WAN DNS Hosts.
Indexes
Column Syntax OID
cmGwWanAddrDnsServerOrder
The order of preference for Internet DNS servers, as listed in
DHCP option 6 (Domain Server) or entered by a user through the
GUI/NMS. Any time valid IP address information is recieved within
DHCP Option 6, as part o…
Enumeration
Enumerated Values:
1primary
2secondary
3tertiary
 .1.3.6.1.4.1.1166.1.19.52.1.1.12.1.1
cmGwWanAddrDnsIpType
This parameter indicates the IP address type of a DNS server.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.52.1.1.12.1.2
cmGwWanAddrDnsIp
This parameter indicates the IP address of a DNS server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.1.12.1.3
cmGwWanAddrDnsRowStatus
The RowStatus interlock for creation and deletion.

When cmGwWanDhcpcAdminStatus is enabled, this object is read-only.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.1.12.1.4

cmGwLanAddrTable

table
.1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1 · 1 row entry · 8 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwLanAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwLanAddrTable' 
This table is a list of LAN-side realm parameters.
cmGwLanAddrEntry row .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1
List of general parameters for DHCP mappings.
Indexes
Column Syntax OID
cmGwLanAddrIpType
The address type assigned on the LAN side for the DHCP Address
Table.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.1
cmGwLanAddrIp
The address assigned on the LAN side for the DHCP Address
Table.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.2
cmGwLanAddrClientID
The client ID as indicated in Option 61 of the DHCP Discover.
There is a one-to-one relationship between the Client ID and
the assigned LAN address. This parameter is entered by the DHCP server
when it grants a lease…
CmGwLanClientIdr/w
Type Constraints:
range: 1..80
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.3
cmGwLanAddrLeaseCreateTime
This value is only set when the cmGwLanAddrTable
entry is created and the entry does not already exist. In
other words, this value is not overwritten at lease renewal
time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.4
cmGwLanAddrLeaseExpireTime
This is the time that the LAN side lease expires. When
the lease expires this entry will be deleted from the table.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.5
cmGwLanAddrMethod
The method that created this Address Entry and the status of the
lease. staticInactive(1) indicates that configuration through the NMS/GUI
established this row (entry) and the IP has not yet been reserved or the lease…
Enumeration
Enumerated Values:
1staticInactive
2staticActive
3dynamicInactive
4dynamicActive
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.6
cmGwLanAddrHostName
This is the Host Name of the LAN IP address, based on DCHP option 12.
OctetStringr/w
Constraints:
range: 0-80
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.7
cmGwLanAddrRowStatus
The RowStatus interlock for creation and deletion.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.2.1.3.1.1.8

cmGwNatMappingTable

table
.1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1 · 1 row entry · 10 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwNatMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwNatMappingTable' 
This table contains IP address and port translation information
for all address translation mappings.
cmGwNatMappingEntry row .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1
List of IP address translation and port translation mappings.
Indexes
Column Syntax OID
cmGwNatMappingIndex
The Index into the Mapping Table.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.1
cmGwNatMappingWanAddrType
The IP address type assigned on the WAN side. IP version
4 is typically used.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.2
cmGwNatMappingWanAddr
The IP address assigned on the WAN side. IP version 4
is typically used.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.3
cmGwNatMappingWanPort
The TCP/UDP port number on the WAN side.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.4
cmGwNatMappingLanAddrType
The IP address type assigned on the LAN side.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.5
cmGwNatMappingLanAddr
The IP address assigned on the LAN side.
This parameter is entered by the DHCP server when it grants a lease to a
LAN IP Device on the LAN side and creates a row in this table.
Alternatively, this parameter can be cre…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.6
cmGwNatMappingLanPort
The TCP/UDP port number on the LAN side.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.7
cmGwNatMappingMethod
Indicates how this mapping was created. Static means that it was provisioned, and dynamic
means that it was handled by the gateway itself.
Enumeration
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.8
cmGwNatMappingProtocol
The protocol for this mapping.
Enumeration
Enumerated Values:
1other
2icmp
3udp
4tcp
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.9
cmGwNatMappingRowStatus
The RowStatus interlock for the creation and deletion of a cmGwNatMappingTable entry.
Changing the value of the IP address or port number columns of the Gateway NAT Mapping
Table may have an effect on active traffic, so…
SNMPv2-TCRowStatus
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.1.1.10

cmGwNatPassthroughTable

table
.1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwNatPassthroughTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwNatPassthroughTable' 
This table contains MAC addresses for LAN-IP Devices which are configured
as passthrough mode.
cmGwNatPassthroughEntry row .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1
List of hardware addresses for LAN IP Devices which are configured as passthrough mode.
Indexes
Column Syntax OID
cmGwNatPassthroughIndex
The index into the passthrough table.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.1
cmGwNatPassthroughMACAddr
MAC Address of LAN-IP Device to be configured as passthrough mode.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.2
cmGwNatPassthroughDMZEnable
When this value is set to true, traffic for this device will not be firewalled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.3
cmGwNatPassthroughRowStatus
The RowStatus interlock for the creation and deletion
of a cmGwNatPassthroughTable entry. There are no
restrictions on setting the read-create column of this table
(i.e., cmGwNatPassthroughMACAddr ) when the status
of c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.3.1.2.2.1.4

cmGwDevEventTable

table
.1.3.6.1.4.1.1166.1.19.52.1.4.1.2 · 1 row entry · 7 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwDevEventTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwDevEventTable' 
Contains a log of network and device events that may be
of interest in fault isolation and troubleshooting.
cmGwDevEventEntry row .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1
Describes a network or device event that may be of
interest in fault isolation and troubleshooting. Multiple
sequential identical events are represented by
incrementing cmGwDevEvCounts and setting
cmGwDevEvLastTime to t…
Indexes
Column Syntax OID
cmGwDevEvIndex
Provides relative ordering of the objects in the event
log. This object will always increase except when
(a) the log is reset via cmGwDevEvControl,
(b) the device reboots and does not implement non-volatile
storage for …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.1
cmGwDevEvFirstTime
The time that this entry was created.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.2
cmGwDevEvLastTime
If multiple events are reported via the same entry, the
time that the last event for this entry occurred,
otherwise this should have the same value as
cmGwDevEvFirstTime.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.3
cmGwDevEvCounts
The number of consecutive event instances reported by
this entry. This starts at 1 with the creation of this
row and increments by 1 for each subsequent duplicate
event.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.4
cmGwDevEvLevel
The priority level of this event as defined by the
vendor. These are ordered from most serious (emergency)
to least serious (debug).
Enumeration
Enumerated Values:
1emergency
2alert
3critical
4error
5warning
6notice
7information
8debug
 .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.5
cmGwDevEvId
For this product, uniquely identifies the type of event
that is reported by this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.6
cmGwDevEvText
Provides a human-readable description of the event,
including all relevant context (interface numbers,
etc.).
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.4.1.2.1.7

cmGwAlgTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1000.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwAlgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwAlgTable' 
Table of ALGs (Port Triggers) supported by this device.
This table currently supports up to 47 configureable entries.
          
The first 15 entries are predefined and only cmGwAlgEnable field can be modified
by NMS/GUI. 
                                     
The rest of additional 32 entries along with writable field objects are user configureable.
cmGwAlgEntry row .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1
Each entry specifies parameters about an ALG (Port Trigger) .
Indexes
Column Syntax OID
cmGwAlgIndex
The index for this ALG (Port Trigger).
Unsigned32
Constraints:
range: 1-47
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.1
cmGwAlgName
Unique name for this ALG (Port Trigger).
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.2
cmGwAlgProtocol
Protocol type for this ALG (Port Trigger).
Enumerationr/w
Enumerated Values:
1tcp
2udp
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.3
cmGwAlgPortFrom
Start port for this ALG (Port Trigger).
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.4
cmGwAlgPortTo
End port for this ALG (Port Trigger).
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.5
cmGwAlgSessionChaining
Control session chaining for this ALG (Port Trigger).
Enumerationr/w
Enumerated Values:
1disabled
2tcp
3tcpAndUdp
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.6
cmGwAlgSessionInterval
Control session interval in seconds for this ALG (Port Trigger).
secondsUnsigned32r/w
Constraints:
range: 0-30000
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.7
cmGwAlgAddressReplacement
Controls the type of address replacement to be performed for this ALG (Port Trigger).
Enumerationr/w
Enumerated Values:
1disabled
2tcp
3udp
4tcpAndUdp
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.8
cmGwAlgMultipleHostEnable
Set to true to only allow new Port Trigger session initiated from/to the same remote host.
Set to false to allow new session initated from/to different remote hosts.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.9
cmGwAlgEnable
Set to true to enable this Alg (Port Trigger).
Set to false to disable this Alg (Port Trigger).
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.10
cmGwAlgStatus
Controls the creation and modification of Port Trigger entries in this table.
To change any ALG(Port Trigger) MIB objects will require cmGwAlgStatus to set to
'not-in-service' and reset back to 'active' in order to pop…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.1000.1.2.1.11

cmGwVirtualServerTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1001.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwVirtualServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwVirtualServerTable' 
Table of virtual server (Port Forwarding) entry supported by this device.
This table currently supports 32 configureable entries.
cmGwVirtualServerEntry row .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1
Each entry specifies parameters about a virtual server (Port Forwarding).
Note: For products that support USB applications, the first entry in this table is
reserved for internal use and may not be replaced, modified, …
Indexes
Column Syntax OID
cmGwVirtualServerIndex
The Index into the virtual server (Port Forwarding) Table.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.1
cmGwVirtualServerName
The server name for this virtual server (Port Forwarding) entry.
The server name can be empty string.
OctetStringr/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.2
cmGwVirtualServerType
Indicates how cmGwVirtualServerPort1 and cmGwVirtualServerPort2 used.
wanPortRange(1) means that cmGwVirtualServerPort1 is the starting WAN port range
and cmGwVirtualServerPort2 is the ending WAN port range.
Enumerationr/w
Enumerated Values:
1wanPortRange
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.3
cmGwVirtualServerPort1
The TCP/UDP port number 1.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.4
cmGwVirtualServerPort2
The TCP/UDP port number 2.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.5
cmGwVirtualServerLanAddrType
The IP address type assigned on the LAN side.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.6
cmGwVirtualServerLanAddr
The IP address assigned on the LAN side.
The first 3 octets default value should be the LAN Private IP Address (192.168.0)
and 0 for the last octet.

The last octet has to be changed to some value within …
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.7
cmGwVirtualServerEnable
Set to true to enable this virtual server (Port Forwarding) entry.
Set to false to disable this virtual server (Port Forwarding) entry.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.8
cmGwVirtualServerRowStatus
The RowStatus interlock for the creation and deletion of a cmGwVirtualServerTable entry.
The SNMP entity will prevent modification of this table's columns when the cmGwVirtualServerRowStatus
object is in the active sta…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.9
cmGwVirtualServerProtocol
Protocol type for this virtual server (Port Forwarding) entry.
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.1166.1.19.52.1.1001.1.2.1.10

cmGwAlgPredefinedTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1002.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwAlgPredefinedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwAlgPredefinedTable' 
Table of predefined ALGs supported by this device.
Note: This table contains predefined entries for true NAT ALGs (Application Level
Gateways) for protocols that embed the host IP address inside the protocol data of 
the IP packet. The cmGwPortTriggeTable that is also in this MIB handles NAT Port Triggers, 
not the types of ALGs supported by this table. This table only allows for the 
enabling/disabling of the predefined ALGs. It does not allow for the creation of 
new ALGs.
cmGwAlgPredefinedEntry row .1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1
Each entry specifies parameters about a predefined ALG.
Indexes
Column Syntax OID
cmGwAlgPredefinedIndex
The index for this predefined ALG.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1.1
cmGwAlgPredefinedName
Unique name for this predefined ALG.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1.2
cmGwAlgPredefinedEnable
Set to true to enable this predefined ALG.
Set to false to disable this predefined ALG.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.1002.1.1.1.3

cmGwPortTriggerTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1004.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwPortTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwPortTriggerTable' 
Table of Port Triggers supported by this device.
cmGwPortTriggerEntry row .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1
Each entry specifies parameters for a Port Trigger.
Indexes
Column Syntax OID
cmGwPortTriggerIndex
The index for this Port Trigger.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.1
cmGwPortTriggerStartPortTriggerRange
Start port of Trigger Range for this Port Trigger. Trigger Range defines the range of ports
that will act as a trigger to open the ports set by Target Range.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.2
cmGwPortTriggerEndPortTriggerRange
End port of Trigger Range for this Port Trigger. Trigger Range defines the range of ports
that will act as a trigger to open the ports set by Target Range.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.3
cmGwPortTriggerStartPortTargetRange
Start port of Target Range for this Port Trigger. When the gateway detects outgoing data on
a specific port number set in the Trigger Range(cmGwPortTriggerStartPortTriggerRange - cmGwPortTriggerEndPortTriggerRange),
th…
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.4
cmGwPortTriggerEndPortTargetRange
End port of Target Range for this Port Trigger. When the gateway detects outgoing data on a
specific port number set in the Trigger Range(cmGwPortTriggerStartPortTriggerRange - cmGwPortTriggerEndPortTriggerRange),
the …
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.5
cmGwPortTriggerProtocol
Protocol type for this Port Trigger.
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.6
cmGwPortTriggerEnable
Set to true to enable this Port Trigger.
Set to false to disable this Port Trigger.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.7
cmGwPortTriggerRowStatus
The RowStatus interlock for the creation and deletion of a cmGwPortTriggerTable entry.
The SNMP entity will prevent modification of this table's columns when cmGwPortTriggerRowStatus
object is in the active state.
To c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.1004.1.2.1.8

cmGwFiltersIpFilterTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwFiltersIpFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwFiltersIpFilterTable' 
Table of IP address filters used to block internet traffic to specific network devices
on the LAN.
cmGwFiltersIpFilterEntry row .1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1
Each entry specifies parameters for an IP address filter.
Indexes
Column Syntax OID
cmGwFiltersIpFilterIndex
The index for this IP address filter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.1
cmGwFiltersIpFilterAddressType
The IP address type assigned on the LAN side.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.2
cmGwFiltersIpFilterStartAddress
The Start IP address for this IP address filter. This address must be within the range of
LAN side IP addresses.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.3
cmGwFiltersIpFilterEndAddress
The End IP address for this IP filter. This address must be within the range of
LAN side IP addresses.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.4
cmGwFiltersIpFilterEnable
Set to true to enable this IP Filter.
Set to false to disable this IP Filter.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.5
cmGwFiltersIpFilterRowStatus
The RowStatus interlock for the creation and deletion of a cmGwFiltersIpFilterTable entry.
The SNMP entity will prevent modification of this table's columns when cmGwFiltersIpFilterRowStatus
object is in the active sta…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.1.2.1.6

cmGwFiltersMacFilterTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwFiltersMacFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwFiltersMacFilterTable' 
Table of MAC address filters used to block internet traffic to specific network devices
on the LAN.
cmGwFiltersMacFilterEntry row .1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1
Each entry specifies MAC address of the network device to be blocked from internet access.
Indexes
Column Syntax OID
cmGwFiltersMacFilterIndex
The index for this MAC address filter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1.1
cmGwFiltersMacFilterMacAddress
MAC address of the network device to be blocked from internet access.
SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1.2
cmGwFiltersMacFilterRowStatus
There are no restrictions on setting the read-create columns of this table
when the status of cmGwMacFilterRowStatus is 'active'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.2.2.1.3

cmGwFiltersPortFilterTable

table
.1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2 · 1 row entry · 6 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk cmGwFiltersPortFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CM-GATEWAY-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CM-GATEWAY-MIB::cmGwFiltersPortFilterTable' 
Table of Port filters used to block specific internet services to all devices on the LAN. 
These are outbound Port Filters that prevent LAN devices from sending outgoing traffic 
to the WAN on specified port numbers.
cmGwFiltersPortFilterEntry row .1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1
Each entry specifies parameters about a Port filtering rule.
Indexes
Column Syntax OID
cmGwFiltersPortFilterIndex
The index for this Port Filter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.1
cmGwFiltersPortFilterStartPort
Start Port Number for this Port Filter.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.2
cmGwFiltersPortFilterEndPort
End Port Number for this Port Filter.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.3
cmGwFiltersPortFilterProtocol
Protocol type for this Port Filter.
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.4
cmGwFiltersPortFilterEnable
Set to true to enable this Port Filter.
Set to false to disable this Port Filter.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.5
cmGwFiltersPortFilterRowStatus
The RowStatus interlock for the creation and deletion of a cmGwFiltersPortFilterTable entry.
The SNMP entity will prevent modification of this table's columns when cmGwFiltersPortFilterRowStatus
object is in the active…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.1166.1.19.52.1.1005.1.3.2.1.6