CISCOSB-TRUNK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
23

rlDot3adAggBalanceTable

table
.1.3.6.1.4.1.9.6.1.101.65.2 · 1 row entry · 4 columns
Open in standard view 
An entry of this table specifies a balancing criterion used
for the corresponding dot3adAggIndex.
rlDot3adAggBalanceEntry entry .1.3.6.1.4.1.9.6.1.101.65.2.1
A list of information for each dot3adAggIndex.
Indexes
IEEE8023-LAG-MIBdot3adAggIndex rlDot3adAggBalanceForwardType
Column Syntax OID
rlDot3adAggBalanceForwardType
A Forwarding type: Bridging or Routing.
Enumeration
Enumerated Values:
1bridging
2routing
 .1.3.6.1.4.1.9.6.1.101.65.2.1.1
rlDot3adAggBalanceLayer
A Network Layer Number, may have the following values: 2, 3 or 4.
The default value is:
Bridging: 2
Routing: 3.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.65.2.1.2
rlDot3adAggBalanceUsedAddresses
Specifies the Network Layer addresses used for Balancing of
unicast frames.
The function sets the criterion (by layer and used address in it).
Enumerationr/w
Enumerated Values:
0notApplied
1dstAddr
2srcAddr
3dstAndSrcAddr
4vlanId
5ethType
 .1.3.6.1.4.1.9.6.1.101.65.2.1.3
rlDot3adAggBalanceBroadcastType
Specifies a balancing criterion used for L2 broadcast and unknown
frames:
common:
a link allocated for broadcast and unknown frames is used
for unicast frames too
dedicated:
a link allocated f…
Enumerationr/w
Enumerated Values:
0common
1dedicated
 .1.3.6.1.4.1.9.6.1.101.65.2.1.4

rlDot3adAggCreationTable

table
.1.3.6.1.4.1.9.6.1.101.65.6 · 1 row entry · 2 columns
Open in standard view 
An entry of this table is for creation of an aggregator
for the corresponding dot3adAggIndex, when the value of the
rlDot3adAggCreationSupport is diffrent from notSupported.
rlDot3adAggCreationEntry entry .1.3.6.1.4.1.9.6.1.101.65.6.1
An information for each dot3adAggIndex.
Indexes
IEEE8023-LAG-MIBdot3adAggIndex
Column Syntax OID
rlDot3adAggCreationTrunk
The aggregator can aggregate ports in manual configuration.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.65.6.1.1
rlDot3adAggCreationLacp
The aggregator can aggregate ports by lacp.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.65.6.1.2

rlDot3adAggPortLacpTable

table
.1.3.6.1.4.1.9.6.1.101.65.8 · 1 row entry · 12 columns
Open in standard view 
An entry of this table specifies lacp protocol state and
statistics for the corresponding dot3adAggPortIndex.
rlDot3adAggPortLacpEntry entry .1.3.6.1.4.1.9.6.1.101.65.8.1
A list of information for each dot3adAggPortIndex.
Indexes
IEEE8023-LAG-MIBdot3adAggPortIndex
Column Syntax OID
rlDot3adAggPortLacpPdusRx
The number of valid LACPDUs received on this
Aggregation Port. This value is read-only.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.65.8.1.1
rlDot3adAggPortLacpPDUsTx
The number of LACPDUs transmitted on this
Aggregation Port. This value is read-only.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.65.8.1.2
rlDot3adAggPortLacpRxState
This attribute holds the value 'current' if the Receive
state machine for the Aggregation Port is in the
CURRENT state, 'expired' if the Receive state machine
is in the EXPIRED state, 'defaulted' if the Receive state
ma…
Enumeration
Enumerated Values:
1current
2expired
3defaulted
4initialize
5portDisabled
6lacpDisabled
 .1.3.6.1.4.1.9.6.1.101.65.8.1.3
rlDot3adAggPortLacpMuxState
This attribute holds the value 'detached' if the Mux
state machine for the Aggregation Port is
in the DETACHED state, 'waiting' if the Mux state machine
is in the WAITING state, 'attached' if the Mux state
machine for t…
Enumeration
Enumerated Values:
1detached
2waiting
3attached
4collecting
5distributing
6collectingDistributing
 .1.3.6.1.4.1.9.6.1.101.65.8.1.4
rlDot3adAggPortLacpPeriodicState
This attribute holds the value 'noPeriodic' if the Periodic
state machine for the Aggregation Port is
in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine
is in the FAST_PERIODIC state, 'slowPeriodic' if th…
Enumeration
Enumerated Values:
1noPeriodic
2fastPeriodic
3slowPeriodic
4periodicTx
 .1.3.6.1.4.1.9.6.1.101.65.8.1.5
rlDot3adAggPortLacpSelected
This attribute holds the value 'unselected' if the Selected variable
for the Aggregation Port is set to UNSELECTED, 'selected' if the
Selected variable for the Aggregation Port is set to SELECTED,
or 'waiting' if the Se…
Enumeration
Enumerated Values:
1unselected
2selected
3waiting
 .1.3.6.1.4.1.9.6.1.101.65.8.1.6
rlDot3adAggPortLacpReady
A read-only Boolean value indicating whether the
Aggregation Port is in the WAITING state in the Mux state machine
and its wait_while_timer has expired ('TRUE').
otherwise, its valus is 'FALSE'.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.65.8.1.7
rlDot3adAggPortLacpPortMoved
A read-only Boolean value indicating whether the
Partner_Oper_System or Partner_Oper_Port_Number in use by the
Aggregation Port has been changed in an incoming LACPDU ('TRUE').
otherwise, its valus is 'FALSE'.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.65.8.1.8
rlDot3adAggPortLacpNNT
A read-only Boolean value indicating whether there is a new protocol
information that should be transmitted on the link, or that the Partner
needs to be reminded of the old information.
otherwise, its valus is 'FALSE'.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.65.8.1.9
rlDot3adAggPortLacpPeriodicTxTimer
The amount of time in seconds remaining before the Periodeic Tx timer
will expire.
This value is read-only.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.65.8.1.10
rlDot3adAggPortLacpCurrentWhileTimer
The amount of time in seconds remaining before the Current While timer
will expire.
This value is read-only.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.65.8.1.11
rlDot3adAggPortLacpWaitWhileTimer
The amount of time in seconds remaining before the Wait While timer
will expire.
This value is read-only.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.6.1.101.65.8.1.12

rlDot3adAggLacpMembershipRestrictionsTable

table
.1.3.6.1.4.1.9.6.1.101.65.10 · 1 row entry · 5 columns
Open in standard view 
An entry of this table specifies membership restrictions
for ports that lacp is enbaled on them, and try to attach to
the corresponding dot3adAggIndex.
rlDot3adAggLacpMembershipRestrictionsEntry entry .1.3.6.1.4.1.9.6.1.101.65.10.1
A list of information for each dot3adAggIndex.
Indexes
IEEE8023-LAG-MIBdot3adAggIndex
Column Syntax OID
rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey
This variable specifies the administrative key
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.6.1.101.65.10.1.1
rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode
This variable specifies the required speed of the LACP aggregator
in bits per second.
A value of 10 is returned for 10G.
A value of 0 is returned if the value of the variable
hasn't been set.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.65.10.1.2
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId
This variable specifies the administrative MAC Address
of the remote LACP aggregator.
A null mac address is returned if the value of the variable
hasn't been set.
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.9.6.1.101.65.10.1.3
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority
This variable specifies the administrative System Priority
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.6.1.101.65.10.1.4
rlDot3adAggLacpMembershipRestrictionsIndividualAggregator
This variable specifies if the lacp aggregator represents an
Aggregate ('FALSE') or an Individual link ('TRUE').
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.6.1.101.65.10.1.5