CISCOSB-OPC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
23

rlOpcCapturePointTable

table
.1.3.6.1.4.1.9.6.1.101.248.1 · 1 row entry · 14 columns
Open in standard view
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlOpcCapturePointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSB-OPC-MIB' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSB-OPC-MIB::rlOpcCapturePointTable' 
Table with Capture point configuration entries
rlOpcCapturePointEntry row .1.3.6.1.4.1.9.6.1.101.248.1.1
The table, listing the Capture Point entries
Indexes
No indexes recorded
Column Syntax OID
rlOpcName
Name of the Capture Point. Key to the table
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.248.1.1.1
rlOpcBufferType
Capture point Buffer Type
Enumerationr/w .1.3.6.1.4.1.9.6.1.101.248.1.1.2
rlOpcBufferSize
Capture point buffer size in MB
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.248.1.1.3
rlOpcBufferUsed
The size within the buffer that is actually used.
The size will be indicated in increments of 128 KB
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.248.1.1.4
rlOpcBufferPacketNum
Number of captured packets in the buffer
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.248.1.1.5
rlOpcBufferPacketsDropped
Number of packets dropped
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.248.1.1.6
rlOpcBufferPacketsPerSecond
Packet capture rate. Number of packets being
captured per second. Zero if capture point is not active
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.6.1.101.248.1.1.7
rlOpcFilterType
Type of packet capture filter to be applied for capture point
Enumerationr/w .1.3.6.1.4.1.9.6.1.101.248.1.1.8
rlOpcFilterAclName
ACL as capture filter. Set only if rlOpcFilterType is match_access_list
ACL must already exist. Length of the string is same as rlQosAclName MIB
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.248.1.1.9
rlOpcLimitDuration
Limit capture by duration, zero if no limit is set
secondsUnsigned32r/w .1.3.6.1.4.1.9.6.1.101.248.1.1.10
rlOpcLimitNumOfPackets
Limit capture by number of packets, zero if no limit is set
Unsigned32r/w .1.3.6.1.4.1.9.6.1.101.248.1.1.11
rlOpcLimitMaxPacketLen
Limit capture by maximum packet length, zero if no limit is set
Unsigned32r/w .1.3.6.1.4.1.9.6.1.101.248.1.1.12
rlOpcState
Operating state of the capture point
Enumeration .1.3.6.1.4.1.9.6.1.101.248.1.1.13
rlOpcCapturePointRowStatus
The status of the entry. It's used to add/delete the entries
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.6.1.101.248.1.1.14

rlOpcInterfaceTable

table
.1.3.6.1.4.1.9.6.1.101.248.2 · 1 row entry · 4 columns
Open in standard view
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlOpcInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSB-OPC-MIB' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSB-OPC-MIB::rlOpcInterfaceTable' 
Table with capture filter for the capture point
rlOpcInterfaceEntry row .1.3.6.1.4.1.9.6.1.101.248.2.1
The table, listing the Capture Point buffer entries
Indexes
No indexes recorded
Column Syntax OID
rlOpcInterfaceCaptureName
Name of the Capture Point. Key to the table
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.248.2.1.1
rlOpcInterfaceIfIndex
IfIndex of the capture point filter source
Control plane ifindex is 2147483646
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.9.6.1.101.248.2.1.2
rlOpcInterfaceCaptureDirection
Capture direction, indicates which direction of traffic to capture on the interface
Enumerationr/w .1.3.6.1.4.1.9.6.1.101.248.2.1.3
rlOpcInterfaceRowStatus
The status of the entry. It's used to add/delete the entries
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.6.1.101.248.2.1.4

rlOpcActionTable

table
.1.3.6.1.4.1.9.6.1.101.248.3 · 1 row entry · 5 columns
Open in standard view
Uses the ciscosb variant from /opt/observium/mibs/ciscosb.
Command help
Walk rlOpcActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCOSB-OPC-MIB' -M '/opt/observium/mibs/ciscosb:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCOSB-OPC-MIB::rlOpcActionTable' 
Table with capture point action
rlOpcActionEntry row .1.3.6.1.4.1.9.6.1.101.248.3.1
The table, listing the Capture Point buffer entries
Indexes
No indexes recorded
Column Syntax OID
rlOpcActionCaptureName
Name of the Capture Point. Key to the table
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.248.3.1.1
rlOpcExportDestLocationType
Capture export file destination
Enumerationr/w .1.3.6.1.4.1.9.6.1.101.248.3.1.2
rlOpcExportFileName
The name of the export file
OctetStringr/w .1.3.6.1.4.1.9.6.1.101.248.3.1.3
rlOpcAction
Start, stop a capture or export it to a pcap file
Enumerationr/w .1.3.6.1.4.1.9.6.1.101.248.3.1.4
rlOpcActionRowStatus
The status of the entry. It's used to add/delete the entries
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.6.1.101.248.3.1.5