CISCO-WIRELESS-P2MP-RF-METRICS-MIB
This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface specification.
- Source file
CISCO-WIRELESS-P2MP-RF-METRICS-MIB- Last revised
- Identity
ciscoWirelessRfMetricsMIB- Base OID
1.3.6.1.4.1.9.9.180
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-WIRELESS-TC-MIB | CwrCollectionAction CwrCollectionStatus CwrFixedPointPrecision CwrFixedPointScale CwrFixedPointValue CwrThreshLimitType CwrUpdateTime P2mpRadioSignalAttribute P2mpSnapshotAttribute |
| IF-MIB | ifIndex OwnerString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | MacAddress RowStatus TimeInterval TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WIRELESS-P2MP-RF-METRICS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WIRELESS-P2MP-RF-METRICS-MIB::ciscoWirelessRfMetricsMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WIRELESS-P2MP-RF-METRICS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WIRELESS-P2MP-RF-METRICS-MIB::ciscoWirelessRfMetricsMIB'
Objects (94)
Showing 94 of 94 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.180 |
||
.1.3.6.1.4.1.9.9.180.1 |
||
.1.3.6.1.4.1.9.9.180.1.1 |
||
.1.3.6.1.4.1.9.9.180.1.1.1 |
||
.1.3.6.1.4.1.9.9.180.1.1.1.1 |
||
|
|
.1.3.6.1.4.1.9.9.180.1.1.1.10 |
|
|
|
.1.3.6.1.4.1.9.9.180.1.1.1.11 |
|
|
|
.1.3.6.1.4.1.9.9.180.1.1.1.12 |
|
.1.3.6.1.4.1.9.9.180.1.1.1.13 |
||
.1.3.6.1.4.1.9.9.180.1.1.1.14 |
||
.1.3.6.1.4.1.9.9.180.1.1.1.2 |
||
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.180.1.1.1.3 |
.1.3.6.1.4.1.9.9.180.1.1.1.4 |
||
.1.3.6.1.4.1.9.9.180.1.1.1.5 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.180.1.1.1.6 |
|
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.1.1.1.7 |
|
|
.1.3.6.1.4.1.9.9.180.1.1.1.8 |
|
|
|
.1.3.6.1.4.1.9.9.180.1.1.1.9 |
|
.1.3.6.1.4.1.9.9.180.1.2 |
||
.1.3.6.1.4.1.9.9.180.1.2.1 |
||
.1.3.6.1.4.1.9.9.180.1.2.1.1 |
||
.1.3.6.1.4.1.9.9.180.1.2.1.2 |
||
.1.3.6.1.4.1.9.9.180.1.2.1.3 |
||
.1.3.6.1.4.1.9.9.180.1.2.1.4 |
||
.1.3.6.1.4.1.9.9.180.1.3 |
||
.1.3.6.1.4.1.9.9.180.1.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.180.1.3.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.1.3.1.2 |
|
.1.3.6.1.4.1.9.9.180.2 |
||
.1.3.6.1.4.1.9.9.180.2.1 |
||
.1.3.6.1.4.1.9.9.180.2.1.1 |
||
.1.3.6.1.4.1.9.9.180.2.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.9.9.180.2.1.1.10 |
|
|
|
.1.3.6.1.4.1.9.9.180.2.1.1.11 |
|
.1.3.6.1.4.1.9.9.180.2.1.1.12 |
||
|
|
.1.3.6.1.4.1.9.9.180.2.1.1.13 |
|
.1.3.6.1.4.1.9.9.180.2.1.1.2 |
||
.1.3.6.1.4.1.9.9.180.2.1.1.3 |
||
|
|
.1.3.6.1.4.1.9.9.180.2.1.1.4 |
|
|
number of data valuesInteger32
|
.1.3.6.1.4.1.9.9.180.2.1.1.5 |
|
.1.3.6.1.4.1.9.9.180.2.1.1.6 |
||
.1.3.6.1.4.1.9.9.180.2.1.1.7 |
||
|
millisecondsInteger32
|
.1.3.6.1.4.1.9.9.180.2.1.1.8 |
|
|
|
.1.3.6.1.4.1.9.9.180.2.1.1.9 |
|
.1.3.6.1.4.1.9.9.180.2.2 |
||
.1.3.6.1.4.1.9.9.180.2.2.1 |
||
.1.3.6.1.4.1.9.9.180.2.2.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.180.2.2.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.2.2.1.3 |
|
.1.3.6.1.4.1.9.9.180.2.3 |
||
.1.3.6.1.4.1.9.9.180.2.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.180.2.3.1.1 |
|
.1.3.6.1.4.1.9.9.180.2.3.1.2 |
||
.1.3.6.1.4.1.9.9.180.3 |
||
.1.3.6.1.4.1.9.9.180.3.1 |
||
.1.3.6.1.4.1.9.9.180.3.1.1 |
||
.1.3.6.1.4.1.9.9.180.3.1.1.1 |
||
.1.3.6.1.4.1.9.9.180.3.1.1.2 |
||
.1.3.6.1.4.1.9.9.180.3.1.1.3 |
||
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.3.1.1.4 |
.1.3.6.1.4.1.9.9.180.3.1.1.5 |
||
.1.3.6.1.4.1.9.9.180.3.1.1.6 |
||
.1.3.6.1.4.1.9.9.180.3.1.1.7 |
||
.1.3.6.1.4.1.9.9.180.3.2 |
||
.1.3.6.1.4.1.9.9.180.3.2.0 |
||
.1.3.6.1.4.1.9.9.180.4 |
||
.1.3.6.1.4.1.9.9.180.4.1 |
||
.1.3.6.1.4.1.9.9.180.4.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.1.1.1 |
|
|
|
.1.3.6.1.4.1.9.9.180.4.1.1.2 |
|
.1.3.6.1.4.1.9.9.180.4.1.1.3 |
||
.1.3.6.1.4.1.9.9.180.4.1.1.4 |
||
.1.3.6.1.4.1.9.9.180.4.1.1.5 |
||
.1.3.6.1.4.1.9.9.180.4.1.1.6 |
||
.1.3.6.1.4.1.9.9.180.4.1.1.7 |
||
.1.3.6.1.4.1.9.9.180.4.1.1.8 |
||
.1.3.6.1.4.1.9.9.180.4.2 |
||
.1.3.6.1.4.1.9.9.180.4.2.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.2 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.4 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.5 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.6 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.7 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.8 |
|
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.2.1.9 |
|
.1.3.6.1.4.1.9.9.180.4.3 |
||
.1.3.6.1.4.1.9.9.180.4.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.9.9.180.4.3.1.1 |
|
.1.3.6.1.4.1.9.9.180.4.3.1.2 |
||
.1.3.6.1.4.1.9.9.180.4.3.1.3 |
||
.1.3.6.1.4.1.9.9.180.5 |
||
.1.3.6.1.4.1.9.9.180.5.1 |
||
.1.3.6.1.4.1.9.9.180.5.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- CISCO-WIRELESS-TC-MIBcisco
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CISCO-WIRELESS-P2MP-RF-METRICS-MIBciscoselected
Conformance Groups (4)
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.180.5.1.1The compliance statement for devices that are Point to
MultiPoint wireless interfaces.
MultiPoint wireless interfaces.
Required groups
| mandatory | p2mpComplianceHistogramGroup | |
| optional | p2mpComplianceThresholdGroup |
This group is mandatory for a system that supports the radio head end feature. It is optional at the Subscriber Unit. |
| optional | p2mpComplianceTimelineGroup |
This group is optional at the head end and the Subscriber Unit. |
| optional | p2mpComplianceSnapshotGroup |
This group is optional at the head end and the Subscriber Unit. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.9.9.180.3.2.0.1 |
The radio subsystem generates this trap when a threshold crosses
its specified limit. The parameters identify the following: p2mpThreshValue - The value that was crossed. p2mpThreshHysteresisTime - The specified hysteresis time p2mpThreshLimitTime - The specified limit time |