CISCO-WIRELESS-P2MP-PHY-MIB

        This is the MIB Module for the Cisco Wireless Radio 
Point to MultiPoint interface.
    
Source file
CISCO-WIRELESS-P2MP-PHY-MIB
Last revised
Identity
ciscoWirelessPhyMIB
Base OID
1.3.6.1.4.1.9.9.170
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC Unsigned32
CISCO-WIRELESS-TC-MIB CwrOscState CwrRfFreqRange CwrRfType
ENTITY-MIB entPhysicalIndex
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WIRELESS-P2MP-PHY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WIRELESS-P2MP-PHY-MIB::ciscoWirelessPhyMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WIRELESS-P2MP-PHY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WIRELESS-P2MP-PHY-MIB::ciscoWirelessPhyMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (95)
.1.3.6.1.4.1.9.9.170
.1.3.6.1.4.1.9.9.170.1
.1.3.6.1.4.1.9.9.170.1.1
.1.3.6.1.4.1.9.9.170.1.1.1
.1.3.6.1.4.1.9.9.170.1.1.1.1
.1.3.6.1.4.1.9.9.170.1.1.1.1.1
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.1
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.2
dBUnsigned32
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.3
dBUnsigned32
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.4
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.5
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.6
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.7
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.8
OctetString
.1.3.6.1.4.1.9.9.170.1.1.1.1.1.9
.1.3.6.1.4.1.9.9.170.1.1.2
.1.3.6.1.4.1.9.9.170.1.1.2.1
.1.3.6.1.4.1.9.9.170.1.1.2.1.1
Integer32
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.1
Degrees CentigradeInteger32
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.10
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.11
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.12
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.13
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.14
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.15
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.2
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.3
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.4
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.5
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.6
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.7
dBmInteger32
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.8
dBmInteger32
.1.3.6.1.4.1.9.9.170.1.1.2.1.1.9
.1.3.6.1.4.1.9.9.170.1.1.2.2
.1.3.6.1.4.1.9.9.170.1.1.2.2.1
Integer32
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.1
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.2
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.3
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.4
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.5
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.6
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.7
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.8
.1.3.6.1.4.1.9.9.170.1.1.2.2.1.9
.1.3.6.1.4.1.9.9.170.1.1.2.3
.1.3.6.1.4.1.9.9.170.1.1.2.3.1
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.1
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.2
InchesUnsigned32
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.3
InchesUnsigned32
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.4
OctetString
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.5
OctetString
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.6
dBi : decibel IsotropicUnsigned32
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.7
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.2.3.1.8
.1.3.6.1.4.1.9.9.170.1.1.3
.1.3.6.1.4.1.9.9.170.1.1.3.1
.1.3.6.1.4.1.9.9.170.1.1.3.1.1
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.3.1.1.1
.1.3.6.1.4.1.9.9.170.1.1.3.1.1.2
Unsigned32
.1.3.6.1.4.1.9.9.170.1.1.3.1.1.3
.1.3.6.1.4.1.9.9.170.1.1.4
.1.3.6.1.4.1.9.9.170.1.1.4.1
.1.3.6.1.4.1.9.9.170.1.1.4.1.1
Integer32
.1.3.6.1.4.1.9.9.170.1.1.4.1.1.1
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.4.1.1.2
Enumeration
.1.3.6.1.4.1.9.9.170.1.1.4.1.1.3
.1.3.6.1.4.1.9.9.170.1.2
.1.3.6.1.4.1.9.9.170.1.2.1
.1.3.6.1.4.1.9.9.170.1.2.1.1
.1.3.6.1.4.1.9.9.170.1.2.1.1.1
minutesUnsigned32
.1.3.6.1.4.1.9.9.170.1.2.1.1.2
.1.3.6.1.4.1.9.9.170.1.2.2
.1.3.6.1.4.1.9.9.170.1.2.2.1
Integer32
.1.3.6.1.4.1.9.9.170.1.2.2.1.1
.1.3.6.1.4.1.9.9.170.1.2.2.1.2
dBmInteger32
.1.3.6.1.4.1.9.9.170.1.2.2.1.3
.1.3.6.1.4.1.9.9.170.1.3
.1.3.6.1.4.1.9.9.170.1.3.1
.1.3.6.1.4.1.9.9.170.1.3.1.1
.1.3.6.1.4.1.9.9.170.1.3.1.1.1
millisecondsUnsigned32
.1.3.6.1.4.1.9.9.170.1.3.1.1.2
Unsigned32
.1.3.6.1.4.1.9.9.170.1.3.1.1.3
.1.3.6.1.4.1.9.9.170.1.3.2
.1.3.6.1.4.1.9.9.170.1.3.2.1
.1.3.6.1.4.1.9.9.170.1.3.2.1.1
.1.3.6.1.4.1.9.9.170.1.3.2.1.2
.1.3.6.1.4.1.9.9.170.1.3.2.1.3
KHzUnsigned32
.1.3.6.1.4.1.9.9.170.1.3.2.1.4
KHzUnsigned32
.1.3.6.1.4.1.9.9.170.1.3.2.1.5
.1.3.6.1.4.1.9.9.170.1.3.2.1.6
.1.3.6.1.4.1.9.9.170.1.4
.1.3.6.1.4.1.9.9.170.1.4.1
.1.3.6.1.4.1.9.9.170.1.4.2
.1.3.6.1.4.1.9.9.170.2
.1.3.6.1.4.1.9.9.170.2.0
Dependencies (13) 8 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (6)
Mandatory group of objects implemented to configure a
point to multipoint wireless radio.
.1.3.6.1.4.1.9.9.170.1.4.2.1
Mandatory group of objects implemented to tune the phy quality
in a point to multipoint wireless radio.
.1.3.6.1.4.1.9.9.170.1.4.2.2
Mandatory group of objects implemented in the point to
multi point wireless system for Testing the link.
.1.3.6.1.4.1.9.9.170.1.4.2.3
Group of objects implemented at the Subscriber unit.
.1.3.6.1.4.1.9.9.170.1.4.2.5
Group of objects implemented at the Head End.
.1.3.6.1.4.1.9.9.170.1.4.2.6
Group of objects implemented in the point to multi point wireless
system for managing the antennas available in the system.
.1.3.6.1.4.1.9.9.170.1.4.2.8
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.170.1.4.1.1
The compliance statement for devices that implement Point to
Multipoint wireless interfaces compliant with the Cisco Systems
Inc. specification.
Required groups
mandatory p2mpCommonRadioGroup
mandatory p2mpCommonRfGroup
mandatory p2mpCommonTestGroup
optional p2mpRadioSuGroup This group is mandatory for a system that supports the
radio subscriber unit feature. It is not implemented at
the Head End.
optional p2mpRadioHeGroup This group is mandatory for a system that supports the
radio head end feature. It is not implemented at the
Subscriber Unit.
optional p2mpRadioAntennaGroup This group is optional for a system that supports the
radio antenna management feature on Head end or
subscriber unit.
Notifications / Traps (11)
NameOIDDescription
.1.3.6.1.4.1.9.9.170.2.0.1
A p2mpRadioPhyFailNotification is sent if the value of
p2mpLastPhyFailureType changes due to the new failure
being detected in the Radio interface.
.1.3.6.1.4.1.9.9.170.2.0.10
The IF transmit frequency oscillator has changed state.
.1.3.6.1.4.1.9.9.170.2.0.11
The IF Reference Frequency oscillator has changed state.
.1.3.6.1.4.1.9.9.170.2.0.2
The supply voltage to the RF resource has changed.
The p2mpRfSupplyVoltageState specifies whether the supply
voltage is in spec or not.
.1.3.6.1.4.1.9.9.170.2.0.3
The RF receive frequency oscillator has changed state.
The p2mpRfRxOscState specifies the current state of
the oscillator.
.1.3.6.1.4.1.9.9.170.2.0.4
The RF transmit frequency oscillator has changed state.
The p2mpRfRxOscState specifies the state of the
oscillator.
.1.3.6.1.4.1.9.9.170.2.0.5
The temperature of the RF module identified by p2mpRfIndex
has exceeded a defined reference.
.1.3.6.1.4.1.9.9.170.2.0.6
This trap indicates that the host and the IF module cannot
communicate with the RF resource identified by p2mpRfType.
.1.3.6.1.4.1.9.9.170.2.0.7
This trap indicates that the transmit power for the RF resource
identified by p2mpRfType exceeded a predefined threshold.
.1.3.6.1.4.1.9.9.170.2.0.8
This trap indicates that the RF resource either came online(1)
or went offline(2).
.1.3.6.1.4.1.9.9.170.2.0.9
The IF receive frequency oscillator has changed state.