Standard view Table view

CISCO-WAN-SRM-MIB

        The MIB module for configuration of bulk distribution
(de-multiplexing of traffic from higher-bandwidth to
lower-bandwidth interfaces).
This is used for configuring bulk distribution of
T3 interfaces on T1 modules supported in MGX82xx series.
Some of the T1 modules are AUSM, FRSM,CESM.
This MIB module also contains info. on configuring
bulk distribution of SONET interfaces(VT interfaces)
on T1 Modules.
        
SRM  - Service Resource Module
SRME - Service Resource Module Enhanced.
Source file
CISCO-WAN-SRM-MIB
Last revised
Identity
ciscoWanSrmMIB
Base OID
1.3.6.1.4.1.351.150.30
Imported Objects
BASIS-MIB cardSpecific
CISCOWAN-SMI ciscoWan
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Integer32 MODULE-IDENTITY OBJECT-TYPE
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WAN-SRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WAN-SRM-MIB::ciscoWanSrmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-SRM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-SRM-MIB::ciscoWanSrmMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (21)
srm3T3CnfGrp
.1.3.6.1.4.1.351.110.3.10
srm3T3CnfGrpTable
.1.3.6.1.4.1.351.110.3.10.1
srm3T3CnfGrpEntry
srmT3LineNumsrmStartT1LineNum
 .1.3.6.1.4.1.351.110.3.10.1.1
srmT3LineNum
Integer32
 .1.3.6.1.4.1.351.110.3.10.1.1.1
srmStartT1LineNum
Integer32
 .1.3.6.1.4.1.351.110.3.10.1.1.2
srmT1RowStatus r/w
Enumeration
 .1.3.6.1.4.1.351.110.3.10.1.1.3
srmTargetSlotNum r/w
Integer32
 .1.3.6.1.4.1.351.110.3.10.1.1.4
srmTargetSlotLineNum r/w
Integer32
 .1.3.6.1.4.1.351.110.3.10.1.1.5
srmeCnfGrp
.1.3.6.1.4.1.351.110.3.22
srmeCnfGrpTable
.1.3.6.1.4.1.351.110.3.22.1
srmeCnfGrpEntry
srmeLineNumsrmeStartVtNum
 .1.3.6.1.4.1.351.110.3.22.1.1
srmeLineNum
Integer32
 .1.3.6.1.4.1.351.110.3.22.1.1.1
srmeStartVtNum
Integer32
 .1.3.6.1.4.1.351.110.3.22.1.1.2
srmeRowStatus r/w
Enumeration
 .1.3.6.1.4.1.351.110.3.22.1.1.3
srmeTargetSlotNum r/w
Integer32
 .1.3.6.1.4.1.351.110.3.22.1.1.4
srmeTargetSlotLineNum r/w
Integer32
 .1.3.6.1.4.1.351.110.3.22.1.1.5
srmeVtFramingType r/w
Enumeration
 .1.3.6.1.4.1.351.110.3.22.1.1.6
ciscoWanSrmMIB
.1.3.6.1.4.1.351.150.30
ciscoWanSrmMIBConformance
.1.3.6.1.4.1.351.150.30.2
ciscoWanSrmMIBGroups
.1.3.6.1.4.1.351.150.30.2.1
ciscoWanSrmMIBCompliances
.1.3.6.1.4.1.351.150.30.2.2
Dependencies (4) 4 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCOWAN-SMIcisco
  3. BASIS-MIBcisco
  4. SNMPv2-CONFrfc
  5. CISCO-WAN-SRM-MIBciscoselected
Conformance Groups (2)
ciscoWanSrmConfGroup
srmT3LineNum srmStartT1LineNum srmT1RowStatus srmTargetSlotNum srmTargetSlotLineNum
The collection of objects which are used for
configuring bulk distribution for SRM module.
 .1.3.6.1.4.1.351.150.30.2.1.1
ciscoWanSrmeConfGroup
srmeLineNum srmeStartVtNum srmeRowStatus srmeTargetSlotNum srmeTargetSlotLineNum srmeVtFramingType
The collection of objects which are used for
configuring bulk distribution for SRM-E module.
 .1.3.6.1.4.1.351.150.30.2.1.2
Compliance Statements (1)

OID .1.3.6.1.4.1.351.150.30.2.2.1
The compliance statement for objects related
to SRM MIB.
Required groups
optional ciscoWanSrmConfGroup This group is mandatory for those products
where SRM is used for bulk distribution.
optional ciscoWanSrmeConfGroup This group is mandatory for those products
where SRM-E is used for bulk distribution.