CISCO-WAN-LAPD-TRUNK-MIB

        The MIB module is defined for establishing a Trunk
to transport PRI (Primary Rate Interface) signaling
information over a RUDP (Reliable UDP) connection for
CCS (Common Channel Signaling) VoIP(Voice Over IP)
Trunking application.
    
Source file
CISCO-WAN-LAPD-TRUNK-MIB
Last revised
Identity
ciscoWanLapdTrunkMIB
Base OID
1.3.6.1.4.1.351.150.23
Imported Objects
BASIS-MIB voice
CISCOWAN-SMI ciscoWan
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WAN-LAPD-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WAN-LAPD-TRUNK-MIB::ciscoWanLapdTrunkMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-LAPD-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-LAPD-TRUNK-MIB::ciscoWanLapdTrunkMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (59)
.1.3.6.1.4.1.351.110.5.5.12
.1.3.6.1.4.1.351.110.5.5.12.1
.1.3.6.1.4.1.351.110.5.5.12.1.1
Integer32
.1.3.6.1.4.1.351.110.5.5.12.1.1.1
Enumeration
.1.3.6.1.4.1.351.110.5.5.12.1.1.10
Enumeration
.1.3.6.1.4.1.351.110.5.5.12.1.1.2
Integer32
.1.3.6.1.4.1.351.110.5.5.12.1.1.3
Integer32
.1.3.6.1.4.1.351.110.5.5.12.1.1.4
millisecondsInteger32
.1.3.6.1.4.1.351.110.5.5.12.1.1.5
millisecondsInteger32
.1.3.6.1.4.1.351.110.5.5.12.1.1.6
Enumeration
.1.3.6.1.4.1.351.110.5.5.12.1.1.7
.1.3.6.1.4.1.351.110.5.5.12.1.1.8
Enumeration
.1.3.6.1.4.1.351.110.5.5.12.1.1.9
.1.3.6.1.4.1.351.110.5.5.12.2
.1.3.6.1.4.1.351.110.5.5.12.2.1
Integer32
.1.3.6.1.4.1.351.110.5.5.12.2.1.1
.1.3.6.1.4.1.351.110.5.5.12.2.1.10
.1.3.6.1.4.1.351.110.5.5.12.2.1.11
.1.3.6.1.4.1.351.110.5.5.12.2.1.12
.1.3.6.1.4.1.351.110.5.5.12.2.1.13
.1.3.6.1.4.1.351.110.5.5.12.2.1.14
.1.3.6.1.4.1.351.110.5.5.12.2.1.15
.1.3.6.1.4.1.351.110.5.5.12.2.1.16
.1.3.6.1.4.1.351.110.5.5.12.2.1.17
.1.3.6.1.4.1.351.110.5.5.12.2.1.18
.1.3.6.1.4.1.351.110.5.5.12.2.1.19
.1.3.6.1.4.1.351.110.5.5.12.2.1.2
.1.3.6.1.4.1.351.110.5.5.12.2.1.20
.1.3.6.1.4.1.351.110.5.5.12.2.1.21
.1.3.6.1.4.1.351.110.5.5.12.2.1.22
.1.3.6.1.4.1.351.110.5.5.12.2.1.23
.1.3.6.1.4.1.351.110.5.5.12.2.1.24
.1.3.6.1.4.1.351.110.5.5.12.2.1.3
.1.3.6.1.4.1.351.110.5.5.12.2.1.4
.1.3.6.1.4.1.351.110.5.5.12.2.1.5
.1.3.6.1.4.1.351.110.5.5.12.2.1.6
.1.3.6.1.4.1.351.110.5.5.12.2.1.7
.1.3.6.1.4.1.351.110.5.5.12.2.1.8
.1.3.6.1.4.1.351.110.5.5.12.2.1.9
.1.3.6.1.4.1.351.110.5.5.12.3
.1.3.6.1.4.1.351.110.5.5.12.3.1
Integer32
.1.3.6.1.4.1.351.110.5.5.12.3.1.1
Integer32
.1.3.6.1.4.1.351.110.5.5.12.3.1.2
Integer32
.1.3.6.1.4.1.351.110.5.5.12.3.1.3
Enumeration
.1.3.6.1.4.1.351.110.5.5.12.3.1.4
.1.3.6.1.4.1.351.150.23
.1.3.6.1.4.1.351.150.23.1
.1.3.6.1.4.1.351.150.23.1.1
.1.3.6.1.4.1.351.150.23.1.1.1
.1.3.6.1.4.1.351.150.23.1.1.1.1
Integer32
.1.3.6.1.4.1.351.150.23.1.1.1.1.1
Enumeration
.1.3.6.1.4.1.351.150.23.1.1.1.1.2
Integer32
.1.3.6.1.4.1.351.150.23.1.1.1.1.3
.1.3.6.1.4.1.351.150.23.1.1.1.1.4
.1.3.6.1.4.1.351.150.23.2
.1.3.6.1.4.1.351.150.23.2.0
.1.3.6.1.4.1.351.150.23.3
.1.3.6.1.4.1.351.150.23.3.1
.1.3.6.1.4.1.351.150.23.3.2
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCOWAN-SMIcisco
  3. BASIS-MIBcisco
  4. SNMPv2-CONFrfc
  5. SNMPv2-TCrfc
  6. CISCO-WAN-LAPD-TRUNK-MIBciscoselected
Compliance Statements (1)

OID .1.3.6.1.4.1.351.150.23.3.1.1
The complaince statement for LAPD Trunk group
which implements vismLapdTrunkGrp MIB.
Required groups
Object refinements
ObjectAccessSyntaxDescription
vismLapdRowStatus readwrite
active(1), createAndGo(4), destroy(6)
Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported.