CISCO-WAN-FR-CONN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
96

frChanCnfGrpTable

table
.1.3.6.1.4.1.351.110.5.1.2.1.1 · 1 row entry · 73 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frChanCnfGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-CONN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-CONN-MIB::frChanCnfGrpTable' 
This table is for configuring connection
parameters for frame relay connections.
frChanCnfGrpEntry row .1.3.6.1.4.1.351.110.5.1.2.1.1.1
An entry for each frame relay connection.
Indexes
Column Syntax OID
chanNum
The value of this object identifies the
frame relay connection/channel index.

Note that the actual range of the index
supported by a card depends on the type of card.

Supported Range for di…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.1
chanRowStatus
This object is used for adding/modifying/deleting
the channel.
add(1) : For adding the frame relay connections.
delete(2): For deleting frame relay connections.
mod(3) : For Modifying frame relay connections.
…
Enumerationr/w
Enumerated Values:
1add
2del
3mod
4outOfService
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.2
chanPortNum
This object refers to the frame relay
port on which channel is created.
This is a mandatory object for creating the channel.

For FRSM12 Card:
This object contains the port's ifIndex value.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.3
dLCI
The value of this object is the DLCI number of the channel.

This is a mandatory object for creating the channel.

All the connections on the same port should have
a unique DLCI number.
…
Integer32r/w
Constraints:
range: 0-8388607
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.4
egressQSelect
Selects one out of two possible port queues.
The default port queue number is 1 which is the high
pririty queue.
1 = High priority queue
2 = Low priority queue
3 = Indicates that this entry is not used (eg: in FRSM-V…
Enumerationr/w
Enumerated Values:
1highPriority
2lowPriority
3notSupported
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.5
ingressQDepth
This variable sets the max depth for queue, before
it starts dropping the cells. It is defined in
terms of number of bytes.
In all cards except the FRSM-VHS card, the range is
limited to (4510..'ffff'h).

…
Integer32r/w
Constraints:
range: 4510-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.6
ingressQECNThresh
This variable sets the max depth for queue, before
it starts flow control. It is defined in terms of
number of bytes.
In all cards except the FRSM-VHS card, the range is
limited to (0..'ffff'h).
For FRSM12 Card: Not Su…
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.7
ingressQDEThresh
This variable sets the max depth for queue, before
they become discard eligible. It is defined in terms of
number of bytes.
In all cards except the FRSM-VHS card, the range is
limited to (0..'ffff'h).
For FRSM12 Card: …
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.8
egressQDepth
This variable sets the max depth for queue, before
it starts dropping the cells. It is defined in terms of
number of bytes.
In all cards except the FRSM-VHS card, the range is
limited to (0..'ffff'h).

e…
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.9
egressQDEThresh
This variable sets the max depth for queue, before
they become discard eligible. It is defined in terms of
number of bytes.
In all cards except the FRSM-VHS card, the range is
limited to (0..'ffff'h).

Fo…
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.10
egressQECNThresh
This variable sets the max depth for queue, before
it starts flow control. It is defined in terms of
number of bytes.
In all cards except the FRSM-VHS card, the range is
limited to (0..'ffff'h).
For FRSM12 Card: Not S…
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.11
deTaggingEnable
This object enables/disables the DE tagging.
The tagging is enabled only in the ingress
direction.

For FRSM12 Card:
When this object is disabled, the ingress policer will never
set the DE bit to 1 in th…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.12
cir
The value of this object is equal to the CIR parameter
for this frame relay connection.

The CIR value have to be less than or equal to the port speed.
Any value from 1 to 2399 will be rounded off to 2400.…
bpsInteger32r/w
Constraints:
range: 0-52000000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.13
bc
The value of this object is equal to the
committed burst size(BC) parameter for this
PVC endpoint.

The value of bc can not be 0 when cir is non zero.
The value of bc has to be 0 if cir is 0.
…
bytesInteger32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.14
be
The value of this object is euqal to the
excess burst size(Be) parameter for this PVC
endpoint.

The value be can not be 0 when cir is 0.

The peak value for be :
For FRSM-VHS and FRSM1…
bytesInteger32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.15
ibs
The value of this object is euqal to the
excess burst size(Be) parameter for this PVC
endpoint.

The value of ibs should be less or equal to bc
when cir is greater than 0.

The value of ib…
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.16
foreSightEnable
This variable enables/disables foreSight option.

Following objects can be modified only when this
object is set to enable(1):

qir, mir, pir

The RATE CONTROL FEATURE has to…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.17
qir
The value of this object is euqal to the
quiescent information rate for Foresight.

The unit is 1 Cell/Sec = 16 fastpackets/sec.

Following information about cps is for reference only:
The…
fastpackets-per-secondInteger32r/w
Constraints:
range: 160-6400000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.18
mir
The value of this object is euqal to the
minimum information rate for Foresight.

The unit is 1 Cell/Sec = 16 fastpackets/sec.
is equal to 16 fastpackets/sec.

Following information about c…
fastpackets-per-secondInteger32r/w
Constraints:
range: 160-6400000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.19
pir
The value of this object is euqal to the
peak information rate for Foresight.

The unit is 1 Cell/Sec = 16 fastpackets/sec.
is equal to 16 fastpackets/sec.

Following information about cps…
fastpackets-per-secondInteger32r/w
Constraints:
range: 160-6400000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.20
chanLocRmtLpbkState
This variable enables or disables the remote loopback for each
channel.
When you enable this option on a connection (channel) then all the
cells that are coming from the network side would be looped back
toward the netw…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.21
chanTestType
The chanTestType starts testing the continuity
or delay of a connection.
It sends specific cell patterns toward the network
and the terminating end of this connection has to be an
MGX8220 or ASI of a BPX in order for …
Enumerationr/w
Enumerated Values:
1testcon
2testdelay
3notest
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.22
chanTestState
This shows the state of the test
When you add a connection then the chanTestState becomes notinprogress
and when you select any test, it would go to inprogress state and after
it completes the test, it will go to failed…
Enumeration
Enumerated Values:
1passed
2failed
3inprogress
4notinprogress
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.23
chanRTDResult
This is round trip delay in milliseconds.
When you select testdelay option for the chanTestType, the result of
the test that is measured in milliseconds can be read in chanRTDResult.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.24
chanType
The value of this object is used for setting the
channel type of a frame relay connection. If set
with values frSIW-transparent(2) and frSIW-translate(3),
all PVC data is subject to service interworking translation
and …
Enumerationr/w
Enumerated Values:
1frNIW
2frSIW-transparent
3frSIW-translate
4frFUNI
5frForward
6frNIWReplace
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.25
chanFECNconfig
The value of this object specifies how to map
from FECN field in the frame Relay PDU to
the EFCI field in the ATM cells.

This object does not apply to NIW.
This is applicable only
for SIW.
…
Enumerationr/w
Enumerated Values:
1mapEFCI
2setEFCIzero
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.26
chanDEtoCLPmap
The value of this object specifies how to map
from DE bit on the Frame Relay side to CLP
bit on the ATM side.

mapCLP(1) : Map DE bit to CLP bit in ATM cell.
setCLPzero(2) : Ignore DE bit. Set CLP to 0…
Enumerationr/w
Enumerated Values:
1mapCLP
2setCLPzero
3setCLPone
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.27
chanCLPtoDEmap
The value of this object enables mapping of
Cell Loss Priority(CLP) bit on the ATM Side
to Discard Eligibility(DE) bit on the Frame relay
side.

The possible values are :

mapDE(1) : …
Enumerationr/w
Enumerated Values:
1mapDE
2setDEzero
3setDEone
4ignoreCLP
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.28
chanIngrPercentUtil
The ingress utilization on a
frame relay connection.
percentageInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.29
chanEgrPercentUtil
The egress utilization on a
frame relay connection.
percentageInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.30
chanEgrSrvRate
The value of this object identifies egress CIR
value for a frame relay connection.

The value of this object must be less than or equal(<=)
to the port speed.

The value supported depends upo…
Integer32r/w
Constraints:
range: 2400-52000000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.31
chanOvrSubOvrRide
The value of this object enables/disables the
oversubscription on a connection.
This object allows one to add a new connection on a port
even if it is over subscribed.

For FRSM12 Card: Not Supported.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.32
chanFrConnType
The value of this object is used for configuring
connection type of a frame relay connection.

The possible values are :

pvc(1) : Permanent Virtual Connection
svc(2) : Switched Virtu…
Enumerationr/w
Enumerated Values:
1pvc
2svc
3spvc
4par
5pnni
6tag
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.33
frCDRNumber
The value of this object identifies
the CDR(Call Detail Record) number.
This is the key to correlate
cell/frame counts, start/end record.

For FRSM12 Card: Not Supported
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.34
frLocalVpi
The value of this object provides the VPI
value for the local endpoint.
This object in conjunction with frLocalVci and
frLocalNSAP represents the local end point of
this connection.

The service module …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.35
frLocalVci
The value of this object provides the VCI
value for the local endpoint.
This object in conjunction with frLocalVpi and
frLocalNSAP represents the local end point of
this connection.

The service module …
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.36
frLocalNSAP
The value of this object identifies the
NSAP address of the frame relay connection.

The value of this object follows the format:
Prefix : 13 Bytes
Cisco ID : 2 bytes
Reserved …
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.37
frRemoteVpi
The value of this object identifies the VPI value of remote
end point of this connection. The frRemoteVpi, frRemoteVci
and frRemoteNSAP identifies the remote end point of
this connection.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.38
frRemoteVci
The value of this object identifies the VCI value of remote
end point of this connection. The frRemoteVpi, frRemoteVci
and frRemoteNSAP identifies the remote end point of
this connection.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.39
frRemoteNSAP
The value of this object identifies the
NSAP address of the frame relay connection.

The value of this object follows the format:

Prefix : 13 Bytes
Cisco ID : 2 bytes
…
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.40
frMastership
This is used by PXM to determine if this end point is
master or slave, a new type unknown is added to identify
the SM in MGX8220 shelf and the SM in MGX shelf. In AXIS
shelf, user can still use addchan to add a channel…
Enumerationr/w
Enumerated Values:
1master
2slave
3unknown
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.41
frVpcFlag
This represents the connection type, used for PXM to
identify VPC/VCC but FRSM card doesn't use it
always set to vcc for FRSM card
For FRSM12 Card:
For chanFrConnType = pnni(5), this object is
set to vcc(2) always.
Enumerationr/w
Enumerated Values:
1vpc
2vcc
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.42
frConnServiceType
This specifies the service type
1 ==> Constant Bit Rate
2 ==> Variable Bit Rate
3 ==> Not used
4 ==> Unspecified Bit Rate
5 ==> ATM frame relay
6 ==> standard ABR
7 ==> foresight ABR
Note that this is used by PXM card,…
Enumerationr/w
Enumerated Values:
1cbr
2vbr
3notUsed
4ubr
5atfr
6abrstd
7abrfst
8vbrrt
21cbr1
22vbr1rt
23vbr2rt
24vbr3rt
25vbr1nrt
26vbr2nrt
27vbr3nrt
28ubr1
29ubr2
30stdabr
31cbr2
32cbr3
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.43
frRoutingPriority
This is used by PXM to determine how important this
connection is when selecting connections to route
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.44
frMaxCost
The value of this object specifies the
Maximum allowed cost. It is related to Cost Based Routing.
This is used by PXM so that it won't choose a path with
a cost greater than this configured level. This is not
necessary …
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.45
frRestrictTrunkType
Restricted trunk type for routing, used by PXM. It
specifies that the connection either cannot be routed over
satelite trunks, or terrestrial trunks, or it can be on
any type of trunk. It is not necessary to be provide…
Enumerationr/w
Enumerated Values:
1norestriction
2terrestrialTrunk
3sateliteTrunk
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.46
frConnPCR
The value of this object identifies
the PCR(Peak Cell Rate). If not provided in
the connection setup request, it'll be derived from
object 'pir'.

For FRSM12 Card:
Default value is (1.44 * CIR)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.47
frConnRemotePCR
Peak cell rate of the other end, if not set, will be
set to the same as local end PCR (frConnPCR). However,
note that if the CIRs for both local and remote end
are set to the different value (i.e., asymmetric conn),
th…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.48
frConnMCR
Minimum cell rate, if not provided in the connection setup
request, it'll be derived from object 'mir'.
For FRSM12 Card:
Default value is frConnPCR
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.49
frConnRemoteMCR
Minimum cell rate of the other end, if not set, will be
set to the same as local end MCR (frConnMCR). However,
note that if the CIRs for both local and remote end
are set to the different value (i.e., asymmetric conn),
…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.50
frConnPercentUtil
This is the expected long-term utilization of the
channel by this end-point. If this is not specified in
the connection setup request, it'll be defaulted to
100 percent

For FRSM12 Card: Not Supported
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.51
frConnRemotePercentUtil
This is the expected long-term utilization of the
channel by the other end-point. If this is not specified in
the connection setup request, it'll be set to be the same
as the local end frConnPercentUtil value assuming t…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.52
frConnForeSightEnable
This object is used by the controller(PAR/PNNI/TAG) to
set up the Qbin for the connection, if this is not set,
it'll be defaulted by SM to the same as foreSightEnable
in the end point parameters.

For FRS…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.53
frConnFGCRAEnable
The value of this object is used for
enabling/disabling Frame based GCRA
(early packet discard).

For FRSM12 Card: Not Supported.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.54
chanServType
The value of this object indicates the
indicates the class of the connection.
1-High priority (typically CBR connections)
2- real-time VBR
3- non-real time VBR
4- Available Bit Rate
5- Unspecified Bit Ra…
Enumerationr/w
Enumerated Values:
1highpriority
2rtVBR
3nrtVBR
4aBR
5uBR
6queue6
7queue7
8queue8
9stdABR
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.55
chanServiceRateOverride
This variable sets the SAR IR programming option.
Foresight and chanServiceRateOverride are mutually exclusive.

For FRSM12 Card: Not Supported.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.56
chanServiceRate
This is the rate to which IR can be set to when
chanServiceRateOverride is set to enable(1). If
chanServiceRateOverride is disable(2) then this object
does not have any significance.
For FRSM-8T1/8E1,this is defined i…
Integer32r/w
Constraints:
range: 160-6400000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.57
zeroCirConEir
The value of this object defines defines EIR
value for '0' CIR connection.

If the value is '0', EIR is set to port speed.
If zeroCirConEir is non-zero value, EIR is set
to value of this object, and this…
Integer32r/w
Constraints:
range: 0-52000000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.58
chanReroute
This is used by the administrator to trigger the re-routing
of the connection. The rerouting takes effect, when this object
is set to true(1). When set to false (2), no action is taken.
A get on this object always retur…
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.59
frConnSCR
Sustained cell rate, Used for VBR connections setup with PNNI
controller.
For FRSM12 Card: Default value is frConnPCR
This object is not applicable to MGX Release 1.x.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.60
frConnRemoteSCR
Sustained cell rate of the other end, Used for VBR connections
setup with PNNI controller.
For FRSM12 Card: Default value is frConnSCR
This object is not applicable to MGX Release 1.x
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.61
frConnTemplateId
This object specifies the template identifier for the connection
template associated with this connection.
The valid range for templates is 1..16.
A value of 17 indicates no template is associated with this
connection
F…
Integer32r/w
Constraints:
range: 1-17
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.62
frConnAdminStatus
This object specifies channel admin status.
This object is not applicable to MGX Release 1.x.
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.63
frChanCnfChangeCount
This object is added only for FRSM12 card.

This counter tracks the number of configuration changes
that happen on a channel. The counter is
associated only with the end point and NOT with the
connect…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.64
frChanCnfIgnoreIncomingDE
This object is added for FRSM12 card.
When this object is enabled, the incoming frames with
DE(Discard Eligible) bit set to 1 are counted in the
Bc bucket instead of Be bucket

This object is not applica…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.65
frChanOamCCEnable
This object is added for FRSM12 card.

This object serves to enable or disable continuity check(CC)
on a connection endpoint. When continuity check is enabled
on an endpoint, the endpoint anticipates OAM …
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.66
frChanStatsEnable
This object serves the purpose of enabling/disabling statistics
collection on a per connection basis. In implementations which
do not have such limitations, this object can be set to enable(1)
for all connections.
…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.67
frChanLocalLpbkEnable
This object is added for FRSM12 card.
This object when enabled adds a channel-level loopback
towards the port side. If the connection is in loopback,
Connection MIB (FrChanCnfGrpEntry) variables cannot be modified.
…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.68
frChanUpcEnable
This object is added for FRSM12 card.

This object when disabled, disables Frame Relay policing.

This object is not applicable to MGX Release 1.x.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.69
frChanSlaveType
This object is added for FRSM12 card.
This object indicates whether a master endpoint has a persistent
slave or not. A connection with a master and a non-persistent
slave is considered a single-ended SPVC.
…
Enumerationr/w
Enumerated Values:
1persistentSlave
2nonPersistentSlave
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.70
frConnRemoteMBS
Remote Maximum Burst Size in terms of number of cells.
This object should be set by the user in cases when
the remote end of the connection is an ATM end-point
where the Local MBS can be explicitly specified. In such
ca…
Integer32r/w
Constraints:
range: 1-5000000
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.71
frChanPrefRouteId
This object serves to to associate a preferred
route with a connection.

The value '0' means no preferred route is associated with
this connection.

Usage:
- If the value of this set to 0…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.72
frChanDirectRoute
This object serves to associate a prefer
route as directed route (correspond to the prefer route
object frChanPrefRouteId).

A directed route specifies that the associated preferred
route is the only perm…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.351.110.5.1.2.1.1.1.73

frstdABRCnfGrpTable

table
.1.3.6.1.4.1.351.110.5.1.2.1.3 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frstdABRCnfGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-CONN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-CONN-MIB::frstdABRCnfGrpTable' 
This table is used for configuring ABR parameters
on a frame relay connection.
frstdABRCnfGrpEntry row .1.3.6.1.4.1.351.110.5.1.2.1.3.1
An entry in ABR Configuration table.
Indexes
Column Syntax OID
frstdABRcnfChanNum
Refers to the virtual connection index.

The value supported depends upon the type
of service module.

Supported Range for different Card Types:

FRSM-4T1/E1 : supported …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.1
frstdABRTBE
The value of this object is equal to
Transient Buffer Exposure(TBE). The TBE is a negotiated
number of cells that the network would like to limit
the source to sending during startup periods, before the
first RM-cell re…
cellsInteger32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.2
frstdABRFRTT
The value of this object is equal to
Fixed Round-Trip Time(FRTT). The FRTT is
sum of the fixed propogation delays from
the source to a destination network.

The Value 0 signifies that FRTT is not availabl…
milli-secondsInteger32r/w
Constraints:
range: 0-16700
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.3
frstdABRRDF
The value of this object is equal to
Rate Decrease Factor(RDF). The RDF controls the
rate decrease which occurs when backward RM-cells
with CI=1 are received. Larger values lead to faster
rate decrease.

T…
Integer32r/w
Constraints:
range: 1-32768
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.4
frstdABRRIF
The value of this object is equal to
Rate Increase Factor(RIF). The RIF controls the
rate increase which occurs when a backward RM-cell
is received with CI=0 and NI=0.

The value specified has to be inver…
Integer32r/w
Constraints:
range: 1-32768
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.5
frstdABRNrm
The value of this object is equal to
number of cells a source may send for each
forward RM cell.
The valid values possible are only powers of 2
starting from 2; i.e. 2, 4, 8 ..... 256.
The SNMP agent has to verify this …
Integer32r/w
Constraints:
range: 2-256
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.6
frstdABRTrm
The value of this object is equal to
Upper bound on the time between forward RM
cells for an active source.
milli-secondsInteger32r/w
Constraints:
range: 3-255
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.7
frstdABRCDF
The value of this object is equal to
Cutoff Decrease Factor(CDF). The value specified
has to be inverted to arrive at the actual value.
The valid values possible are 0
and only powers of 2; i.e., 1, 2, 4, 8, 16, 32, 64.…
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.8
frstdABRADTF
The value of this object is equal to
ACR Decrease Time Factor(ADTF).
The Granularity allowed is 10 milli seconds.
i.e. 10,20,30 etc.
The SNMP agent has to verify this compliance.
milli-secondsInteger32r/w
Constraints:
range: 10-10230
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.9
frstdABRICR
The value of this object is equal to
Initial Cell Rate(ICR). The ICR is the rate at which
the source should send initially and after an idle period.
This includes the bandwidth allocated for both data cells
as well as…
cells-per-secondInteger32r/w
Constraints:
range: 10-400000
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.10
frstdABRMCR
The value of this object is equal to
Minimum Cell Rate(MCR). The MCR is the rate at which
the source is allowed to send. This includes the bandwidth
allocated for both data cells as well as all in-rate RM cells.
cells-per-secondInteger32r/w
Constraints:
range: 10-400000
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.11
frstdABRPCR
The value of this object is equal to
Peak Cell Rate(PCR). The PCR is the rate at which
the source is allowed to send. This includes the
bandwidth allocated for both data cells as well as
all in-rate RM cells.
cells-per-secondInteger32r/w
Constraints:
range: 10-400000
 .1.3.6.1.4.1.351.110.5.1.2.1.3.1.12

frChanStateGrpTable

table
.1.3.6.1.4.1.351.110.5.1.2.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frChanStateGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-CONN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-CONN-MIB::frChanStateGrpTable' 
Table of transmit/receive states of channels.
frChanStateGrpEntry row .1.3.6.1.4.1.351.110.5.1.2.2.1.1
An entry for FrChannelStateGrpEntry.
Indexes
Column Syntax OID
stateChanNum
The value of this object refers to
frame relay connection.

The value must be same as the value of
the object 'chanNum' in frChanCnfGrpTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.2.2.1.1.1
chanState
This variable indicates the LMI state of the
VC (channel).
The possible values are :
notConfigured(1): Connection Not configured
okay(2) : Connection is in Ok state
alarm(3) : Connection is in al…
Enumeration
Enumerated Values:
1notConfigured
2okay
3alarm
4failed
 .1.3.6.1.4.1.351.110.5.1.2.2.1.1.2
xmtAbitState
The value of this object identifies the
A bit transmit state.

The possible values are :

off(1) : LMI is off
sendingAequal1(2) : LMI is on and connection is O.K.
sendingAe…
Enumeration
Enumerated Values:
1off
2sendingAequal1
3sendingAequal0
 .1.3.6.1.4.1.351.110.5.1.2.2.1.1.3
rcvAbitState
The value of this object identifies the
A bit receive state.

The possible values are :

off(1) : LMI is off
rcvingAequal1(2) : LMI is on and connection is O.K.
rcvingAequ…
Enumeration
Enumerated Values:
1off
2rcvingAequal1
3rcvingAequal0
 .1.3.6.1.4.1.351.110.5.1.2.2.1.1.4
xmtATMState
This variable indicates the transmit state of the
VC (channel) on the ATM side.

The possible values are :

notSending(1) : Not sending any state
sendingAIS(2) : Sending AIS OAM state…
Enumeration
Enumerated Values:
1notSending
2sendingAIS
3sendingFERF
 .1.3.6.1.4.1.351.110.5.1.2.2.1.1.5
rcvATMState
This variable indicates the receive state of the
VC (channel) on the ATM side.

The possible values are :

notRcving(1) : Not receiving any state
rcvingAIS(2) : Receiving AIS OAM
rcvingF…
Enumeration
Enumerated Values:
1notRcving
2rcvingAIS
3rcvingFERF
 .1.3.6.1.4.1.351.110.5.1.2.2.1.1.6
chanStatusBitMap
This variable indicates the consolidated bit map of the channel alarm
state.

Individual bit positions are as defined below.

Bit position Fail/Alarm Reason
------------ ---------- …
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.351.110.5.1.2.2.1.1.7

frEndPtMapGrpTable

table
.1.3.6.1.4.1.351.110.5.1.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frEndPtMapGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-CONN-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-CONN-MIB::frEndPtMapGrpTable' 
This is the Endpoint Mapping table for
Frame Relay connections.
frEndPtMapGrpEntry row .1.3.6.1.4.1.351.110.5.1.3.1.1
An entry in the frame relay connection Endpoint
table.
Indexes
Column Syntax OID
endPortNum
This object identifies the frame relay logical port.
The value for this object must be same as 'portNum'
object in frPortCnfPortGrpTable.

If ifTable is is implemented in a service module,
this object must…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.3.1.1.1
endDLCI
The value of this object is equal to the
DLCI value for this PVC endpoint.
Integer32
Constraints:
range: 0-8388607
 .1.3.6.1.4.1.351.110.5.1.3.1.1.2
endChanNum
The value of this object identifies the
frame relay connection number.

The value of this object is same as the
value of 'chanNum' object in frChanCnfGrpTable.

This object contains value 0, …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.3.1.1.3
endLineNum
The value of this object is equal to the physical
line(for example T1/E1) or ifIndex on which connection
is provisioned.

If ifTable is not implemented in a service module,
then the range is from 1 to Maxi…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.3.1.1.4