CISCO-WAN-CES-RSRC-PART-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
9

cesmPortCnfResPartGrpTable

table
.1.3.6.1.4.1.351.110.5.3.1.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cesmPortCnfResPartGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-CES-RSRC-PART-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-CES-RSRC-PART-MIB::cesmPortCnfResPartGrpTable' 
This table is for configuring the resource partition 
parameters.
cesmPortCnfResPartGrpEntry row .1.3.6.1.4.1.351.110.5.3.1.2.1.1
An entry for a resource partition. A resource
partition have to be created before connections
can be added to the logical ports.
Indexes
Column Syntax OID
cesmResPartPortNum
The value of this object identifies the CES port.
The value of this object must be same as the value
of 'cesPortNum' from cesmPortCnfGrpTable.
Integer32
Constraints:
range: 1-2048
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.1
cesmResPartCtrlrNum
This object identifies the controller
which can be used for accessing the resources.

The possible values are :
par(1) : Portable Auto Route controller.
: This value is applicable in Release …
Enumeration
Enumerated Values:
1par
2pnni
3tag
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.2
cesmResPartRowStatus
This object is used for adding/deleting/modifying
resource partition on a CES port.

In MGX Release 1.x:
To add an entry, this object should be set to
add(1), value for other objects should not be…
Enumerationr/w
Enumerated Values:
1add
2del
3mod
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.3
cesmResPartNumOfLcnAvail
This represents number of LCNs available for this
controller and this port.
In CESM-T3/E3 and 8-T1/E1,this value is 1.
Integer32r/w
Constraints:
range: 0-2048
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.4
cesmResPartLcnLow
This represents low end of reserved LCN
In CESM-8T1/E1 and T3/E3, this refers to the
logical port.
Integer32r/w
Constraints:
range: 1-2048
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.5
cesmResPartLcnHigh
This represents high end of reserved LCN
In CESM-8T1/E1 and T3/E3, this refers to the
logical port.
Integer32r/w
Constraints:
range: 1-2048
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.6
cesmResPartIngrPctBW
The percentage of total ingress bandwidth reserved.
In CESM-8T1/E1 and T3/E3, as
there is only one LCN per port and it could be
used by only one controller,this value is
100% for that controller.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.7
cesmResPartEgrPctBW
The percentage of total egress bandwidth reserved
In CESM-8T1/E1 and T3/E3, as
there is only one LCN per port and it could be
used by only one controller,this value is
100% for that controller.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.8
cesmResPartCtrlrID
This is the controller identifier for the resource patition.
The default value is set for PNNI controller.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.351.110.5.3.1.2.1.1.9