CISCO-WAN-ATM-CUG-MIB

        This MIB module is intended for the management of  
'Closed User Group(CUG)' in Cisco ATM switches.  
        
This MIB definition is based upon 'Closed User Group'
recommended by International Telecommunication Union(ITU). 
        
The CUG supplementary service enables users to form groups,
to and from which access is restricted. A specific user may
be member of one or more closed user groups. Members of a
specific closed user group can communicate among themselves
but not, in general, with users outside the group. Specific    
CUG members can have additional capabilities that allow 
them to originate calls to destinations outside the group,
and/or to receive calls from outside the group. Specific
CUG members can have additional restrictions that prevent
them from originating calls to other members of the CUG,
or from receiving calls from other members of the CUG.
        
ITU-T Q.2955.1 Stage 3 description for community of interest
supplementary services using B-ISDN Digital Subscriber
Signalling System No.2(DSS 2): Closed User Group(CUG).
    
Source file
CISCO-WAN-ATM-CUG-MIB
Last revised
Identity
ciscoWanAtmCugMIB
Base OID
1.3.6.1.4.1.9.9.99999
Imported Objects
ATM-TC-MIB AtmAddr
CISCO-SMI ciscoMgmt
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC RowStatus TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-WAN-ATM-CUG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-WAN-ATM-CUG-MIB::ciscoWanAtmCugMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-ATM-CUG-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-ATM-CUG-MIB::ciscoWanAtmCugMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (23)
.1.3.6.1.4.1.9.9.99999
.1.3.6.1.4.1.9.9.99999.0
.1.3.6.1.4.1.9.9.99999.1
.1.3.6.1.4.1.9.9.99999.1.1
.1.3.6.1.4.1.9.9.99999.1.1.1
.1.3.6.1.4.1.9.9.99999.1.1.1.1
.1.3.6.1.4.1.9.9.99999.1.1.1.1.1
.1.3.6.1.4.1.9.9.99999.1.1.1.1.2
Integer32
.1.3.6.1.4.1.9.9.99999.1.1.1.1.3
.1.3.6.1.4.1.9.9.99999.1.1.1.1.4
.1.3.6.1.4.1.9.9.99999.1.1.1.1.5
Enumeration
.1.3.6.1.4.1.9.9.99999.1.1.1.1.6
.1.3.6.1.4.1.9.9.99999.1.1.1.1.7
.1.3.6.1.4.1.9.9.99999.1.2
.1.3.6.1.4.1.9.9.99999.1.2.1
.1.3.6.1.4.1.9.9.99999.1.2.1.1
.1.3.6.1.4.1.9.9.99999.1.2.1.1.1
Enumeration
.1.3.6.1.4.1.9.9.99999.1.2.1.1.2
Enumeration
.1.3.6.1.4.1.9.9.99999.1.2.1.1.3
Integer32
.1.3.6.1.4.1.9.9.99999.1.2.1.1.4
.1.3.6.1.4.1.9.9.99999.3
.1.3.6.1.4.1.9.9.99999.3.1
.1.3.6.1.4.1.9.9.99999.3.2
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. ATM-TC-MIBrfc
  4. CISCO-SMIcisco
  5. SNMPv2-CONFrfc
  6. CISCO-WAN-ATM-CUG-MIBciscoselected
Type Definitions (3)
Integer32 range: 0..160
Enumeration
e164(3)
nsap(8)
OctetString range: 24
Conformance Groups (2)
This group contains the CUGs for each ATM
address on the managed system.
.1.3.6.1.4.1.9.9.99999.3.2.1
This group contains objects for the CUG for each
ATM address on the managed system.
.1.3.6.1.4.1.9.9.99999.3.2.2
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.99999.3.1.1
The compliance statement for SNMPv2 entities which
implement Closed User Groups(CUG).
Required groups