CISCO-VSIMASTER-MIB Table View

A table containing a set of VSI controllers.  Each controller 
represents an instance of the VSI Master control protocol.
A controller communicates with a set of VSI Slaves across 
a control interface.  Running the VSI protocol, the controller
supports a network control application.  
Through VSI, such an application can control the Virtual 
Circuit cross-connect table inside the ATM switch, 
perform monitoring and statistics collection of interfaces and 
virtual circuits on the switch, and discover configuration 
information from within the switch.

vsiMasterControllerEntry row .1.3.6.1.4.1.9.9.162.1.1.1

An entry containing management information applicable to a
controller which uses the VSI protocol. Controller entries
represent internally generated control structures. Therefore
each row is created by the agent in …

Indexes

vsiControllerIndex

Column	Syntax	OID
vsiControllerIndex A unique value per VSI controller, greater than 0. This object gets its value from the vsiControllerId, and is used for row selection within the vsiMasterControllerTable.	VsiControllerIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.1.1.1
vsiControllerId The controller identifier for the VSI controller. Values are arbitrarily assigned by the VSI protocol implementation being managed via this MIB, with local significance only. These values appear in the header of all…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.162.1.1.1.2
vsiCrossConnects This object contains a value equal to the number of cross-connects being controlled via VSI protocol via this controller.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.162.1.1.1.3
vsiControllerType A VSI controller represents an instance of a service layer accessible to a network control application. This object serves to identify the type of the network control application currently being supported by this con…	Enumeration Enumerated Values: 1 other 2 mpls 3 pnni 4 par	.1.3.6.1.4.1.9.9.162.1.1.1.4
vsiBaseVersionSupported A VSI Master protocol instance defines internally a set of versions of the protocol that it will support. These versions are numbered, by default, starting from 1. This object makes available the lowest numbered vers…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.162.1.1.1.5
vsiTopVersionSupported A VSI Master protocol instance defines internally a set of versions of the protocol that it will support. These versions are numbered, by default, starting from 1. This object makes available the highest numbered ver…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.162.1.1.1.6
vsiVersionInUse The number of the VSI version currently being used by this controller. Protocol selection procedures dictate that this should be the highest value of protocol version, between vsiBaseVersionSupported and vsiTopVersi…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.162.1.1.1.7
vsiSpecifiedVersion When this object is written with a non-zero value, re-synchronization procedures will be initiated, if necessary, in order to constrain the master and slaves to use the indicated protocol version. When written with ze…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.162.1.1.1.8
vsiControlInterface A VSI controller communicates with a set of VSI Slaves across a control interface. The controller is connected to the ATM switch via an ATM link called the Slave Control Link. The interface at the Master end of the li…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.162.1.1.1.9
vsiLogicalControlInterface This object describes the instance of a logical interface index bound to the slave end of the Slave Control Link, which is referred to in the description of vsiControlInterface.	VsiLogicalIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.1.1.10
vsiControlIfIpAddress The IP address of the interface identified by the associated vsiControlInterface object.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.162.1.1.1.11
vsiAvailableChnlWarnThreshold A controller has in its domain multiple instances of the vsiLogicalIfAvailIngressChnls and vsiLogicalIfAvailEgressChnls counters. This set of values, associated with all the logical interfaces in the vsiLogicalIfTabl…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.9.9.162.1.1.1.12
vsiAvailableChnlAlarmThreshold A controller has in its domain multiple instances of the vsiLogicalIfAvailIngressChnls and vsiLogicalIfAvailEgressChnls counters. This set of values, associated with all the logical interfaces in the vsiLogicalIfTabl…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.9.9.162.1.1.1.13
vsiAvailableChnlThresholdStatus As described for the vsiAvailableChnlWarnThreshold and vsiAvailableChnlAlarmThreshold objects, events are generated when these thresholds are crossed. This object defines a set of unique values that are used with the…	Enumeration Enumerated Values: 1 warning 2 alarm 3 recovery 4 normal	.1.3.6.1.4.1.9.9.162.1.1.1.14

A table containing VSI master-slave session status information.
Each VSI controller manages a set of VSI slaves, via a protocol
instance called a Session.  VSI slaves are entities that reside
on the controlled ATM switch.  Their number and characteristics
are discovered by the VSI controller via the VSI protocol.  
This table has an entry for each slave so discovered.

vsiSessionEntry row .1.3.6.1.4.1.9.9.162.1.2.1

A vsiSessionEntry is a set of objects that together represent
the status of each instance of VSI protocol and the slave in
an ATM switch to which that instance corresponds. There is
one vsiSession for each slave. T…

Indexes

vsiSessionControllerIndex vsiSessionIndex

Column	Syntax	OID
vsiSessionControllerIndex The ID of the controller which controls this master-slave session. This identifies which vsiMasterControllerEntry represents the controller communicating with a slave through this Session.	VsiControllerIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.2.1.1
vsiSessionIndex A VSI controller discovers a set of slaves through VSI protocol. Each of the discovered slaves is bound to a protocol Session and each of these Sessions occupies a row in the vsiSessionTable. This object is the row se…	VsiSessionIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.2.1.2
vsiSessionVpi The virtual path identifier for this VSI master-slave session. The Slave Control Link, referred to in the description of vsiLogicalControlInterface, supports an ATM control VC. This is the vpi for that link.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.162.1.2.1.3
vsiSessionVci The virtual channel identifier for this VSI master-slave session. The Slave Control Link, referred to in the description of vsiLogicalControlInterface, supports an ATM control VC. This is the vci for that link.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.162.1.2.1.4
vsiSessionSwitchId The identifier of the switch which participates in this VSI master-slave session. The switch terminates the virtual circuit identified by the vpi/vci pair referred to by vsiSessionVpi and vsiSessionVci.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.162.1.2.1.5
vsiSessionSwitchName The IP hostname for the slave switch which is controlled by this session. This is an ascii string of maximum length 64 characters, learned from the ATM switch.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.162.1.2.1.6
vsiSessionSlaveId The identifier of the slave for this VSI master-slave session. This value is learned from the slave on the switch.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.162.1.2.1.7
vsiSessionState The state of the VSI session. inactive(1): communications data structures for communicating with the slave have been created, but the VSI protocol has not been started. unknown(2): slave has been queried, but its confi…	Enumeration Enumerated Values: 1 inactive 2 unknown 3 configuring 4 resyncStarting 5 resyncUnderway 6 resyncEnding 7 discovery 8 established 9 shutdownStarting	.1.3.6.1.4.1.9.9.162.1.2.1.8
vsiSessionWindowSize The maximum number of command messages the VSI master will send before requiring a response from slave. If the value is 0, then flow control is not enabled.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.162.1.2.1.9
vsiSessionCmdsPending The number of unacknowledged command messages. The VSI master sends commands to the slave, without receiving acknowledgement, until the window size threshold has been reached. This object is a count of the number of c…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.162.1.2.1.10
vsiSessionActiveId ID supplied by the slave to identify the session. This value is interpreted by the master, when a change occurs, to indicate that a resync should be inititated.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.162.1.2.1.11
vsiSessionPowerupId ID supplied by the slave to identify the session at powerup. This is the initial value for vsiSessionActiveId, and its default is zero. Changes in vsiSessionActiveId signal a resync.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.162.1.2.1.12

A table containing information about logical interfaces
on the slave switch controlled via VSI.  Logical interfaces
are an abstraction of exposed, external ATM interfaces that
are available for connections.  When two external interfaces,
represented by two logical interfaces, are paired, they 
provide physical paths through the switch.  These physical 
pathways support cross-connects.

vsiLogicalIfEntry row .1.3.6.1.4.1.9.9.162.1.3.1

An entry containing information about a single VSI
logical interface. Entries are instantiated and removed
as signalled by the slave which controls the external
interface. Each entry contains information about the
ca…

Indexes

vsiLogicalIfControllerIndex vsiLogicalIfIndex

Column	Syntax	OID
vsiLogicalIfControllerIndex The VSI controller index of the controller through which this logical interface was learned.	VsiControllerIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.3.1.1
vsiLogicalIfIndex A unique value, greater than zero, for each VSI logical interface. Logical interface numbers are selected by the switch to be unique and persistent. The same number is preserved through power failures. This index is…	VsiLogicalIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.3.1.2
vsiLogicalIfName The physical descriptor of the logical interface, as reported by the VSI slave. It is distinct from ifName.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.162.1.3.1.3
vsiLogicalIfOperState The VSI operational state of the logical interface as reported to the VSI master by the VSI slave. removed(1): the interface is not a valid interface on this controller, is not part of the controller's …	Enumeration Enumerated Values: 1 removed 2 active 3 failedExternal 4 failedInternal	.1.3.6.1.4.1.9.9.162.1.3.1.4
vsiLogicalIfAdminState The current administrative (configured) state of the interface, as reported to the VSI master by the VSI slave. down(1): the interface is not a valid interface for the controller. up(2): the interface is configured for…	Enumeration Enumerated Values: 1 down 2 up 3 pendingDown	.1.3.6.1.4.1.9.9.162.1.3.1.5
vsiLogicalIfRxCells The number of cells received via this logical interface as reported to the VSI master by the VSI slave.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.6
vsiLogicalIfTxCells The number of cells transmitted via this logical interface as reported to the VSI master by the VSI slave.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.7
vsiLogicalIfRxCellsDiscarded The number of received cells discarded by this logical interface as reported to the VSI master by the VSI slave.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.8
vsiLogicalIfTxCellsDiscarded The number of transmitted cells discarded by this logical interface as reported to the VSI master by the VSI slave.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.9
vsiLogicalIfRxHeaderErrors The number of cells received via this logical interface which had header errors, as reported to the VSI master by the VSI slave.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.10
vsiLogicalIfRxInvalidAddrs The number of cells received by this logical interface which had invalid addresses, as reported to the VSI master by the VSI slave. An unknown vpi/vci value set is an example of of an invalid address.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.11
vsiLogicalIfEndPointsInUse The number of end points in use on this logical interface, as reported to the VSI master by the VSI slave. This reflects an aggregate count of input, output and bi-directional end points. If the logical interface has…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.12
vsiLogicalIfAvailIngressChnls The number of ingress channels available for this logical interface, as reported to the VSI master by the VSI slave.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.13
vsiLogicalIfAvailEgressChnls The number of egress channels available for this logical interface, as reported to the VSI master by the VSI slave.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.14
vsiLogicalIfAvailIngressCellRate The available ingress cell rate in cells/second for the logical interface, as reported to the VSI master by the VSI slave.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.15
vsiLogicalIfAvailEgressCellRate The available egress cell rate in cells/second for the logical interface, as reported to the VSI master by the VSI slave.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.162.1.3.1.16
vsiLogicalIfVcMergeSupported If this object has the value true(1) then VC merge capability is supported for this logical interface. Otherwise VC merge capability is not supported on this logical interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.162.1.3.1.17
vsiLogicalIfMulticastSupported If this object has the value true(1) then multicast capability is supported for this logical interface. Otherwise multicast capability is not supported on this logical interface.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.162.1.3.1.18
vsiLogicalIfVpiTranslated If this object has the value true(1) then vpi values entering on this logical interface are translated at the other end of the link. This translation may be an indication that the link is supporting a tunnel. Otherwise…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.162.1.3.1.19
vsiLogicalIfStrictSigRange If this object has the value true(1) then signalling addresses must be in the strict advertised range for the high-address (vpi). Otherwise, signalling addresses are not so constrained.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.162.1.3.1.20
vsiLogicalIfMaxIngressCellRate The maximum ingress cell rate in cells/second for the logical interface, as reported to the VSI. This value is the limiting value for vsiLogicalIfAvailIngressCellRate.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.162.1.3.1.21
vsiLogicalIfMaxEgressCellRate The maximum egress cell rate in cells/second for the logical interface, as reported to the VSI master by the VSI slave.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.162.1.3.1.22
vsiLogicalIfMinVpi Minimum allowed vpi value for this interface as reported by VSI slave switch.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.162.1.3.1.23
vsiLogicalIfMaxVpi Maximum allowed vpi value for this interface as reported by VSI slave switch.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.162.1.3.1.24
vsiLogicalIfMinVci Minimum allowed vci value for this interface as reported by VSI slave switch.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.162.1.3.1.25
vsiLogicalIfMaxVci Maximum allowed vci value for this interface as reported by VSI slave switch.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.162.1.3.1.26
vsiLogicalControlIfIndex The interface index for the interface which controls this logical interface. This is the ifIndex of the controlling network layer interface, and is a direct manifestation of the mapping between a logical interface and…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.162.1.3.1.27
vsiLogicalIfSessionIndex All logical interfaces are in the domain of a VSI slave, which communicates with the VSI master through a Session. This object is a selector for an entry in the table vsiSessionTable. It is the VSI session index for th…	VsiSessionIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.3.1.28

A table containing information about cross-connects
on the slave switch controlled via VSI.  cross-connects
represent virtual links across two interfaces.  The
participating interfaces that support these links are 
represented in this MIB by the vsiLogicalIfTable entries.

vsiXCEntry row .1.3.6.1.4.1.9.9.162.1.4.1

An entry containing information about one unidirectional
or bidirectional cross-connect on the slave switch
controlled via VSI. A VSI controller represents an instance
of a service layer accessible to a network cont…

Indexes

vsiXCControllerIndex vsiXCLogicalIfLow vsiXCLogicalIfHi vsiXCIndex

Column	Syntax	OID
vsiXCControllerIndex The index of the VSI controller through which this cross-connect was instantiated. This object is the index for a vsiControllerTable entry; the controller indexed is the VSI protocol partner to the slave that is con…	VsiControllerIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.4.1.1
vsiXCLogicalIfLow The VSI logical interface index for the first endpoint of the cross-connect. This object is the selector index for one of the two vsiLogicalIfTable entries that support this cross-connect. Further, this index value is…	VsiLogicalIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.4.1.2
vsiXCLogicalIfHi The VSI logical interface index for the second endpoint of the cross-connect. This object is the selector index for one of the two vsiLogicalIfTable entries that support this cross-connect. Further, this index value i…	VsiLogicalIfIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.4.1.3
vsiXCIndex A unique value greater than zero, for each cross-connect within the set of VsiXCTable entries indexed by vsiXCLogicalIfLow and vsiXCLogicalIfHi. The value should remain constant after a cross-connect is initialized. Th…	VsiXCIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.162.1.4.1.4
vsiXCState The operational state of the cross-connect, as reported to the VSI master by the VSI slave. deleted(1): the connection does not exist. reserved(2): connection is in the reserved state. committed(3): connection is in t…	Enumeration Enumerated Values: 1 deleted 2 reserved 3 committed 4 reservedFail	.1.3.6.1.4.1.9.9.162.1.4.1.5
vsiXCVpiLow The vpi of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfLow.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.162.1.4.1.6
vsiXCVciLow The vci of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfLow.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.162.1.4.1.7
vsiXCVpiHi The vpi of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfHi.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.162.1.4.1.8
vsiXCVciHi The vci of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfHi.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.162.1.4.1.9