CISCO-VRF-MIB Table View

This table contains entries representing a VRF - Virtual
Routing and Forwarding instance. There will be an entry for
each VRF instance created in the system.

cvVrfEntry row .1.3.6.1.4.1.9.9.711.1.1.1.1

An entry representing the information pertaining to a virtual
routing and forwarding instance.

Indexes

cvVrfIndex

Column	Syntax	OID
cvVrfIndex An identifier that is assigned to each VRF and is used to uniquely identify it. The uniqueness of this identifier is restricted only to this device.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.711.1.1.1.1.1
cvVrfName The human-readable name of the VRF instance. This name uniquely identifies the VRF instance in the system. This object is mandatory for creating an entry in this table.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.9.9.711.1.1.1.1.2
cvVrfVnetTag The vNET tag assigned to this VRF instance. A value of zero(0) indicates the VRF instance is not a vNET and such vrf could be part of a VRF-Lite or MPLS deployment. A set with a value of ze…	Unsigned32r/w Constraints: range: 0-0 range: 2-4094	.1.3.6.1.4.1.9.9.711.1.1.1.1.3
cvVrfOperStatus Denotes whether a VRF is operational or not. A VRF is up(1) when at least one interface associated with the VRF, which ifOperStatus is up(1). A VRF is down(2) when: a. There does not exist at least one in…	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.9.711.1.1.1.1.4
cvVrfRouteDistProt Denotes the route distribution protocol enabled in this VRF. Note that more than one routing protocol may be enabled at the same time.	Bits Enumerated Values: 0 none 1 other 2 ospf 3 rip 4 isis 5 eigrp 6 bgp	.1.3.6.1.4.1.9.9.711.1.1.1.1.5
cvVrfStorageType The storage type for this entry.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.711.1.1.1.1.6
cvVrfRowStatus This object is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.711.1.1.1.1.7

This table contains the entries representing the VRFs in a VRF
List.

cvVrfListEntry row .1.3.6.1.4.1.9.9.711.1.1.2.1

An entry in this table represents a VRF in a VRF list. A VRF
list is a collection of VRFs grouped together. The list defined

here can be associated to a vNET trunk interface, which would
then act as a trunk…

Indexes

cvVrfListName cvVrfListVindex

Column	Syntax	OID
cvVrfListName The human-readable name of the VRF List. This name uniquely identifies the VRF List in the system.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.711.1.1.2.1.1
cvVrfListVindex This index uniquely identifies a VRF within the VRF list.	Unsigned32 Constraints: range: 1-32	.1.3.6.1.4.1.9.9.711.1.1.2.1.2
cvVrfListVrfIndex This object indicates the associated VRF in the cvVrfTable. The value of this object is index value (cvVrfIndex) of cvVrfTable. The value of this object cannot be modified when the entry is in active(1) s…	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.711.1.1.2.1.3
cvVrfListStorageType The storage type for this entry.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.711.1.1.2.1.4
cvVrfListRowStatus This object is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.711.1.1.2.1.5

This table contains the entries representing the interfaces
associated with a VRF instance.

cvVrfInterfaceEntry row .1.3.6.1.4.1.9.9.711.1.2.1.1

An entry in this table represents an interface to which a VRF
is associated. A VRF can be associated to multiple interfaces.
There will be one entry per interface for each VRF instance in
this table.

Indexes

cvVrfIndex cvVrfInterfaceIndex

Column	Syntax	OID
cvVrfInterfaceIndex This is a unique index for an entry in this table. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in the ifTable. Note that this table does not necessarily correspond one-to-o…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.711.1.2.1.1.1
cvVrfInterfaceType The VRF type of this interface. The type of the interface is determined based on the VRF associated with this interface. If the VRF is not tagged with vnet tag then the type will be vrfEdge. If the VRF is tagged with vn…	CvVrfIfType Type Values: 1 vNETTrunkSI 2 vNETEdge 3 vrfEdge	.1.3.6.1.4.1.9.9.711.1.2.1.1.2
cvVrfInterfaceVnetTagOverride This object can be used to over-ride the vNET tag assigned to the VRF traffic going through this interface. This object is applicable only if the cvVrfInterfaceType of this interface has a value of vNETTrunkSI(1). …	Unsigned32r/w Constraints: range: 0-0 range: 2-4094	.1.3.6.1.4.1.9.9.711.1.2.1.1.3
cvVrfInterfaceStorageType The storage type for this entry.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.711.1.2.1.1.4
cvVrfInterfaceRowStatus This object is used to create, modify, and/or delete a row in this table. When a row is created in this table the VRF is associated to an interface. When a row is deleted from this table the VRF is dis-as…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.711.1.2.1.1.5

This table contains entries representing the interfaces on
which the vNET trunking can be enabled.

cvInterfaceEntry row .1.3.6.1.4.1.9.9.711.1.2.2.1

An entry in this table represents an interface on which the
vNET trunking can be enabled. When an interface is enabled for
vNET trunking, it will carry the traffic for the VRFs which are
tagged with the vNET tag.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cvInterfaceVnetTrunkEnabled This object represents the vNET trunking status for this interface. When enabled for vNET trunking the interface will carry traffic of all vNETs in the device.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.711.1.2.2.1.1
cvInterfaceVnetVrfList The name of the VRF List associated with this interface. A non-zero length string represent a list of vNET tagged VRFs, whose traffic will be forwarded through this interface. A zero length string denotes that the traff…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.711.1.2.2.1.2