CISCO-VOIP-TAP-MIB Table View

The Intercept Stream VoIP Table lists the streams to be 
intercepted. To create a VoIP intercept, an entry 
cvoiptapStreamEntry is created which contains the 
filter details. An entry cTap2StreamEntry of CISCO-TAP2-MIB 
is created, which is the common stream information for all 
kinds of intercepts and type of the specific stream is set 
to IP in this entry. The same data stream may be required by 
multiple taps, and one might assume that often the 
intercepted stream is a small subset of the traffic that 
could be intercepted.  This essentially provides options 
for call selection. For example, if all traffic to or from 
a given user is to be intercepted, one would configure an 
entry which lists the user with approprite tap type. The 
first index indicates which Mediation Device the intercepted 
traffic will be diverted to. The second index permits 
multiple classifiers to be used together, such as having an 
IP address as source or destination. The value of the second 
index is that of the stream's counter entry in the 
cTap2StreamTable. Entries are added to this table via 
citapStreamStatus in accordance with the RowStatus 
convention.

cvoiptapStreamEntry row .1.3.6.1.4.1.9.9.716.1.1.2.1

A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported.

Indexes

CISCO-TAP2-MIBcTap2MediationContentId CISCO-TAP2-MIBcTap2StreamIndex

Column	Syntax	OID
cvoiptapStreamId This object uniquely identifies this warrant. It has to be unique among all the rows.	CvoipWarrantIdr/w Type Constraints: range: 0..30	.1.3.6.1.4.1.9.9.716.1.1.2.1.1
cvoiptapStreamType pen : Pen Register - provides trace of all outgoing calls. Only Call Data is sent. trace : Trace - provides trace of all incoming calls. Only Call Data is sent. penAndTrace : Provides trace of both inc…	Enumerationr/w Enumerated Values: 1 pen 2 trace 3 penAndTrace 4 intercept	.1.3.6.1.4.1.9.9.716.1.1.2.1.2
cvoiptapStreamMatch This field describes the candidate which needs to be tapped.	CvoipSubscriberIdr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.716.1.1.2.1.3
cvoiptapStreamMatchType This field specifies the type of information in cvoiptapStreamMatch. A subscriber or intercept candidate can be defined either as username, phone number or Session Initiation Protocol (SIP) Uniform Resource Identifier…	Enumerationr/w Enumerated Values: 1 usernameOrNumber 2 uri	.1.3.6.1.4.1.9.9.716.1.1.2.1.4
cvoiptapStreamCCMediationDevice This object points to a row in Mediation Table which contains the IP address and port number for sending the Call Content intercept information.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.716.1.1.2.1.5
cvoiptapStreamRowStatus The status of this conceptual row. This object manages creation, modification, and deletion of rows in this table. When any rows must be changed, cvoiptapStreamRowStatus must be first set to 'notInService'. Row will be…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.716.1.1.2.1.6