CISCO-VOICE-LMR-MIB
This MIB module provides management of voice tone
signal as static injected tone for Land Mobile Radio
The tone signal includes tone, pause, guard/idle tone.
User can configure a sequence of tone and pause to
be played out before any voice sample is played out.
These tones are used to wake up the radio and
select the radio channel. During the voice playout,
a configured guard tone will be mixed with the voice
to keep the radio active. For some radio systems,
there is no need for the guard tone, but a configured
idle tone is needed to inform the radio that the
channel is idle. It is possible that the radio system
will generate guard/idle tone. In that case,
the IOS can instruct the DSP to filter out the radio
generated guard/idle tone by enabling digital filter.
Digital filter is able to filter out either 1950HZ or
2175HZ tone.
- Source file
CISCO-VOICE-LMR-MIB- Last revised
- Identity
ciscoVoiceLmrMIB- Base OID
1.3.6.1.4.1.9.9.510
Imported Objects
| CISCO-SMI | ciscoMgmt |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VOICE-LMR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VOICE-LMR-MIB::ciscoVoiceLmrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VOICE-LMR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VOICE-LMR-MIB::ciscoVoiceLmrMIB'
Objects (22)
Showing 22 of 22 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.510 |
||
.1.3.6.1.4.1.9.9.510.1 |
||
.1.3.6.1.4.1.9.9.510.1.1 |
||
.1.3.6.1.4.1.9.9.510.1.1.1 |
||
.1.3.6.1.4.1.9.9.510.1.1.1.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.510.1.1.1.1.1 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.510.1.1.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.9.9.510.1.1.1.1.3 |
|
.1.3.6.1.4.1.9.9.510.1.1.1.1.4 |
||
.1.3.6.1.4.1.9.9.510.1.1.1.1.5 |
||
.1.3.6.1.4.1.9.9.510.1.1.1.1.6 |
||
.1.3.6.1.4.1.9.9.510.1.1.2 |
||
.1.3.6.1.4.1.9.9.510.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.510.1.1.2.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.9.9.510.1.1.2.1.2 |
|
|
OctetString
|
.1.3.6.1.4.1.9.9.510.1.1.2.1.3 |
|
.1.3.6.1.4.1.9.9.510.1.1.2.1.4 |
||
.1.3.6.1.4.1.9.9.510.1.1.2.1.5 |
||
.1.3.6.1.4.1.9.9.510.1.1.2.1.6 |
||
.1.3.6.1.4.1.9.9.510.2 |
||
.1.3.6.1.4.1.9.9.510.2.1 |
||
.1.3.6.1.4.1.9.9.510.2.2 |
Dependencies (5) 5 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-VOICE-LMR-MIBciscoselected
Type Definitions (3)
| Unsigned32 |
range: 0..500 |
|
| Integer32 |
range: -30..3 |
|
| Unsigned32 |
range: 0..4000 |
Conformance Groups (2)
|
A collection of objects that provide info
applicable to digital notch filter or guard/idle tone. |
.1.3.6.1.4.1.9.9.510.2.2.1
|
|
|
A collection of objects that provide info
applicable to either wake-up tone, function selection or pause between tones. It also provides the info about the playout sequence of the tones. |
.1.3.6.1.4.1.9.9.510.2.2.2
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.510.2.1.1The compliance statements for the Cisco Land Mobile
Radio (LMR) MIB.
Radio (LMR) MIB.
Required groups
| mandatory | cvlToneClassGroup | |
| mandatory | cvlToneSignalGroup |