CISCO-VOICE-IF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
14

cvIfCfgTable

table
.1.3.6.1.4.1.9.9.64.1.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cvIfCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VOICE-IF-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VOICE-IF-MIB::cvIfCfgTable' 
The Voice Common Configuration Table. It contains
information about the voice related configuration
parameters for both analog and digital telephony
interfaces.
cvIfCfgEntry row .1.3.6.1.4.1.9.9.64.1.1.1.1
An entry in the configuration table for each voice analog
interface or voice feature associated ISDN D channel.
The entry is automatically created when a voice analog
interface hardware is found or ISDN D channel is
con…
Indexes
Column Syntax OID
cvIfCfgNoiseRegEnable
The object indicates whether or not the background noise
should be played to fill silence gaps if VAD is
activated.
The default value of this object is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.64.1.1.1.1.1
cvIfCfgNonLinearProcEnable
The object indicates whether or not the Nonlinear
Processing is enabled for the interface.
The default value of this object is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.64.1.1.1.1.2
cvIfCfgMusicOnHoldThreshold
The object specifies the Music On Hold Threshold for
the interface.
The default value of this object is -38 dBm.
dBmInteger32r/w
Constraints:
range: -70--30
 .1.3.6.1.4.1.9.9.64.1.1.1.1.3
cvIfCfgInGain
This object contains the amount of gain inserted at the
receiver side of the interface. The input gain settings
only define a gain/loss relative to the 0 dB setting.
The absolute loss at the 0 dB setting could be
implem…
dBInteger32r/w
Constraints:
range: -6-14
 .1.3.6.1.4.1.9.9.64.1.1.1.1.4
cvIfCfgOutAttn
This object contains the amount of attenuation inserted
at the transmit side of the interface.
The output attenuation settings only define a loss
relative to the 0 dB setting.
The absolute loss at the 0 dB setting cou…
dBInteger32r/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.9.9.64.1.1.1.1.5
cvIfCfgEchoCancelEnable
The object specifies whether or not the Echo Cancellation
is enabled for the interface.
The default value of this object is enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.64.1.1.1.1.6
cvIfCfgEchoCancelCoverage
The object specifies the Echo Canceller coverage for
the interface. This object is valid if the
cvIfCfgEchoCancelEnable object is 'true'.
echoCanceller8ms - 8 millisecs echo canceller coverage.
echoCanceller16ms - …
Enumerationr/w
Enumerated Values:
1echoCanceller16ms
2echoCanceller24ms
3echoCanceller32ms
4echoCanceller8ms
5echoCanceller48ms
6echoCanceller64ms
7echoCanceller80ms
8echoCanceller96ms
9echoCanceller112ms
10echoCanceller128ms
 .1.3.6.1.4.1.9.9.64.1.1.1.1.7
cvIfCfgConnectionMode
The object indicates the connection mode of the interface.
normal - the interface acts normally to handle incoming
and outgoing call.
trunk - the interface acts in trunking mode. trunking mode
causes …
Enumerationr/w
Enumerated Values:
1normal
2trunk
3plar
4tieline
 .1.3.6.1.4.1.9.9.64.1.1.1.1.8
cvIfCfgConnectionNumber
This is the E.164 phone number that is used to
establish connection with trunking mode or PLAR mode.
If the cvIfCfgConnectionMode is 'normal', then this
object will be a zero length string.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.64.1.1.1.1.9
cvIfCfgInitialDigitTimeOut
This is the initial digit timeout that indicates the amount
of time the managed system waits for an initial input digit
from the caller. The timer is activated when the call is
accepted and is deactivated upon digit inp…
secondsInteger32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.9.9.64.1.1.1.1.10
cvIfCfgInterDigitTimeOut
This is the inter-digit timeout that indicates the amount
of time the managed system waits for a subsequent input
digit from the caller. The timer is started upon receipt
of an input digit and restarted as each digit is…
secondsInteger32r/w
Constraints:
range: 0-120
 .1.3.6.1.4.1.9.9.64.1.1.1.1.11
cvIfCfgRegionalTone
This object contains the country specific setting
for the tone, ring, cadence parameters to be used by
this interface.
CISCO-TCCountryCoder/w
Type Constraints:
range: 0
range: 2
 .1.3.6.1.4.1.9.9.64.1.1.1.1.12
cvIfCfgEchoCancelWorstERL
The object specifies the worst case Echo Return Loss for
which the echo canceller must operate. To some echo
cancellers this object may not apply. This object is
valid if the cvIfCfgEchoCancelEnable object is 'true'.…
Enumerationr/w
Enumerated Values:
1echoCancellerWorstERLUnknown
2echoCancellerWorstERL6dB
3echoCancellerWorstERL3dB
4echoCancellerWorstERL0dB
 .1.3.6.1.4.1.9.9.64.1.1.1.1.13
cvIfCfgEchoCanceller
The object specifies which echo canceller is present
on the interface.
echoCancellerStandard - for this echo canceller valid
values of cvIfCfgEchoCancelCoverage are echoCanceller8ms
through echoCanceller32ms; cvIfCfgEc…
Enumeration
Enumerated Values:
1echoCancellerStandard
2echoCancellerExtended
 .1.3.6.1.4.1.9.9.64.1.1.1.1.14