CISCO-VOICE-ENABLED-LINK-MIB Table View

cvEnabledLinkTable

table

.1.3.6.1.4.1.9.10.53.1.1.2 · 1 row entry · 6 columns

Uses the cisco variant from /opt/observium/mibs/cisco.

Command help

Walk cvEnabledLinkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VOICE-ENABLED-LINK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VOICE-ENABLED-LINK-MIB::cvEnabledLinkTable'

This table contains information about ATM and Frame
Relay Links used by voice over ATM and voice over Frame
Relay calls.

cvEnabledLinkEntry row .1.3.6.1.4.1.9.10.53.1.1.2.1

The information regarding a single ATM or Frame Relay
Link. An entry of this table is created when its
associated pvc is enabled for carrying Cisco Switched
voice traffic. The entry is deleted when its associated
pvc is…

Indexes

cvEnabledLinkIndex

Column Syntax OID

cvEnabledLinkIndex

A monotonically increasing number, starting from zero,
that is assigned to each link that is currently
configured to carry Cisco Switched voice traffic. If a
link is later unconfigured for voice traffic, the
number assi…

Integer32

Constraints:
range: 0-2147483648

.1.3.6.1.4.1.9.10.53.1.1.2.1.1

cvEnabledLinkType

The object defines the type of link, either ATM or
Frame Relay.

Enumeration

Enumerated Values:

1	atm
2	framerelay

.1.3.6.1.4.1.9.10.53.1.1.2.1.2

cvEnabledLinkInterfaceName

The object specifies the iFName of the peer interface
that is used for the voice over ATM/FR call. A zero
length string indicates that the value is unavailable.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.9.10.53.1.1.2.1.3

cvEnabledLinkVpiDlci

The VPI or DLCI used for this ATM/Frame Relay
connection.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.9.10.53.1.1.2.1.4

cvEnabledLinkVci

The VCI used, if it is an ATM connection.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.9.10.53.1.1.2.1.5

cvEnabledLinkRemoteMacAddr

The default MAC address of the node at the other end of
the link.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.9.10.53.1.1.2.1.6