CISCO-VOICE-COMMON-DIAL-CONTROL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
14
.1.3.6.1.4.1.9.10.55.1.1.1 · 1 row entry · 7 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cvCommonDcCallActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VOICE-COMMON-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveTable'
This table is a common extension to the call active
table of IETF Dial Control MIB. It contains common call 
leg information about a network call leg.
cvCommonDcCallActiveEntry row .1.3.6.1.4.1.9.10.55.1.1.1.1
The common information regarding a single network call
leg. The call leg entry is identified by using the same
index objects that are used by Call Active table of IETF
Dial Control MIB to identify the call.
An entry o…
Column Syntax OID
The global call identifier for the network call.
CvcGUid
Type Constraints:
range: 0..16
.1.3.6.1.4.1.9.10.55.1.1.1.1.1
The object indicates whether or not the VAD (Voice
Activity Detection) is enabled for the voice call.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.10.55.1.1.1.1.2
The negotiated coder rate. It specifies the transmit
rate of voice/fax compression to its associated call leg
for the call.
This rate is different from the configuration rate
because of rate negotiation during the cal…
CvcCoderTypeRate
Type Values:
1other
2fax2400
3fax4800
4fax7200
5fax9600
6fax14400
7fax12000
10g729r8000
11g729Ar8000
12g726r16000
13g726r24000
14g726r32000
15g711ulawr64000
16g711Alawr64000
17g728r16000
18g723r6300
19g723r5300
20gsmr13200
21g729Br8000
22g729ABr8000
23g723Ar6300
24g723Ar5300
25ietfg729r8000
26gsmeEr12200
27clearChannel
28g726r40000
29llcc
30gsmAmrNb
31g722
32iLBC
33iLBCr15200
34iLBCr13330
35g722r4800
36g722r5600
37g722r6400
38iSAC
39aaclc
40aacld
.1.3.6.1.4.1.9.10.55.1.1.1.1.3
Specifies the payload size of the voice packet.
Integer32
Constraints:
range: 10-255
.1.3.6.1.4.1.9.10.55.1.1.1.1.4
Specifies the type of in-band signaling being used on
the call. This object is instantiated only for
Connection Trunk calls.
CvcInBandSignaling
Type Values:
1cas
2none
3cept
4transparent
5gr303
.1.3.6.1.4.1.9.10.55.1.1.1.1.5
The calling party name this call is connected to. If the
name is not available, then it will have a length of zero.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.9.10.55.1.1.1.1.6
The object indicates whether or not the caller ID feature
is blocked for this voice call.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.10.55.1.1.1.1.7
.1.3.6.1.4.1.9.10.55.1.2.1 · 1 row entry · 7 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cvCommonDcCallHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VOICE-COMMON-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallHistoryTable'
This table is the Common extension to the call history
table of IETF Dial Control MIB. It contains Common call 
leg information about a network call leg.
cvCommonDcCallHistoryEntry row .1.3.6.1.4.1.9.10.55.1.2.1.1
The common information regarding a single network call
leg. The call leg entry is identified by using the same
index objects that are used by Call Active table of IETF
Dial Control MIB to identify the call.
An entry o…
Column Syntax OID
The global call identifier for the gateway call.
CvcGUid
Type Constraints:
range: 0..16
.1.3.6.1.4.1.9.10.55.1.2.1.1.1
The object indicates whether or not the VAD (Voice
Activity Detection) was enabled for the voice call.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.10.55.1.2.1.1.2
The negotiated coder rate. It specifies the transmit rate
of voice/fax compression to its associated call leg for
the call.
This rate is different from the configuration rate
because of rate negotiation during the cal…
CvcCoderTypeRate
Type Values:
1other
2fax2400
3fax4800
4fax7200
5fax9600
6fax14400
7fax12000
10g729r8000
11g729Ar8000
12g726r16000
13g726r24000
14g726r32000
15g711ulawr64000
16g711Alawr64000
17g728r16000
18g723r6300
19g723r5300
20gsmr13200
21g729Br8000
22g729ABr8000
23g723Ar6300
24g723Ar5300
25ietfg729r8000
26gsmeEr12200
27clearChannel
28g726r40000
29llcc
30gsmAmrNb
31g722
32iLBC
33iLBCr15200
34iLBCr13330
35g722r4800
36g722r5600
37g722r6400
38iSAC
39aaclc
40aacld
.1.3.6.1.4.1.9.10.55.1.2.1.1.3
Specifies the payload size of the voice packet.
Integer32
Constraints:
range: 10-255
.1.3.6.1.4.1.9.10.55.1.2.1.1.4
Specifies the type of in-band signaling used on the
call. This object is instantiated only for
Connection Trunk calls.
CvcInBandSignaling
Type Values:
1cas
2none
3cept
4transparent
5gr303
.1.3.6.1.4.1.9.10.55.1.2.1.1.5
The calling party name this call is connected to. If
the name is not available, then it will have a length
of zero.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.9.10.55.1.2.1.1.6
The object indicates whether or not the caller ID
feature is blocked for this voice call.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.10.55.1.2.1.1.7