Standard view Table view

CISCO-VOICE-ATM-DIAL-CONTROL-MIB

        This MIB module enhances the IETF Dial Control MIB
(RFC2128) by providing ATM management information over a
data network.

Source file: CISCO-VOICE-ATM-DIAL-CONTROL-MIB
Last revised: 17 Nov 2002, 00:00 UTC
Identity: ciscoVoiceAtmDialControlMIB
Base OID: 1.3.6.1.4.1.9.10.35

Imported Objects

CISCO-DIAL-CONTROL-MIB	cCallHistoryIndex
CISCO-SMI	ciscoExperiment
CISCO-VOICE-COMMON-DIAL-CONTROL-MIB	CvcFaxTransmitRate CvcGUid CvcInBandSignaling CvcSpeechCoderRate
DIAL-CONTROL-MIB	callActiveIndex callActiveSetupTime
IF-MIB	ifIndex
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	DisplayString TEXTUAL-CONVENTION (no object page) TruthValue

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VOICE-ATM-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VOICE-ATM-DIAL-CONTROL-MIB::ciscoVoiceAtmDialControlMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VOICE-ATM-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VOICE-ATM-DIAL-CONTROL-MIB::ciscoVoiceAtmDialControlMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (49)

ciscoVoiceAtmDialControlMIB		`.1.3.6.1.4.1.9.10.35`
ciscoVoiceAtmDialControlMIBObjects		`.1.3.6.1.4.1.9.10.35.1`
cvAtmCallHistory		`.1.3.6.1.4.1.9.10.35.1.1`
cvAtmCallHistoryTable		`.1.3.6.1.4.1.9.10.35.1.1.1`
cvAtmCallHistoryEntry	CISCO-DIAL-CONTROL-MIBcCallHistoryIndex	`.1.3.6.1.4.1.9.10.35.1.1.1.1`
cvAtmCallHistoryConnectionId	CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid	`.1.3.6.1.4.1.9.10.35.1.1.1.1.1`
cvAtmCallHistoryUseSeqNumbers	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.35.1.1.1.1.10`
cvAtmCallHistoryVpi	Integer32	`.1.3.6.1.4.1.9.10.35.1.1.1.1.2`
cvAtmCallHistoryVci	Integer32	`.1.3.6.1.4.1.9.10.35.1.1.1.1.3`
cvAtmCallHistoryLowerIfName	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.1.1.1.4`
cvAtmCallHistorySessionTarget	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.1.1.1.5`
cvAtmCallHistorySubchannelID	Integer32	`.1.3.6.1.4.1.9.10.35.1.1.1.1.6`
cvAtmCallHistorySessionProtocol	CvAtmSessionProtocol	`.1.3.6.1.4.1.9.10.35.1.1.1.1.7`
cvAtmCallHistoryCalledNumber	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.1.1.1.8`
cvAtmCallHistoryDtmfRelay	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.35.1.1.1.1.9`
cvAtmCallActive		`.1.3.6.1.4.1.9.10.35.1.2`
cvAtmCallActiveTable		`.1.3.6.1.4.1.9.10.35.1.2.1`
cvAtmCallActiveEntry	DIAL-CONTROL-MIBcallActiveSetupTimeDIAL-CONTROL-MIBcallActiveIndex	`.1.3.6.1.4.1.9.10.35.1.2.1.1`
cvAtmCallActiveConnectionId	CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcGUid	`.1.3.6.1.4.1.9.10.35.1.2.1.1.1`
cvAtmCallActiveUseSeqNumbers	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.35.1.2.1.1.10`
cvAtmCallActiveVpi	Integer32	`.1.3.6.1.4.1.9.10.35.1.2.1.1.2`
cvAtmCallActiveVci	Integer32	`.1.3.6.1.4.1.9.10.35.1.2.1.1.3`
cvAtmCallActiveLowerIfName	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.2.1.1.4`
cvAtmCallActiveSessionTarget	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.2.1.1.5`
cvAtmCallActiveSubchannelID	Integer32	`.1.3.6.1.4.1.9.10.35.1.2.1.1.6`
cvAtmCallActiveSessionProtocol	CvAtmSessionProtocol	`.1.3.6.1.4.1.9.10.35.1.2.1.1.7`
cvAtmCallActiveCalledNumber	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.2.1.1.8`
cvAtmCallActiveDtmfRelay	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.35.1.2.1.1.9`
cvAtmDialPeer		`.1.3.6.1.4.1.9.10.35.1.3`
cvAtmPeerCfgTable		`.1.3.6.1.4.1.9.10.35.1.3.1`
cvAtmPeerCfgEntry	IF-MIBifIndex	`.1.3.6.1.4.1.9.10.35.1.3.1.1`
cvAtmPeerCfgSessionProtocol r/w	CvAtmSessionProtocol	`.1.3.6.1.4.1.9.10.35.1.3.1.1.1`
cvAtmPeerCfgInBandSignaling r/w	CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcInBandSignaling	`.1.3.6.1.4.1.9.10.35.1.3.1.1.10`
cvAtmPeerCfgVADEnable r/w	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.35.1.3.1.1.11`
cvAtmPeerCfgUseSeqNumbers r/w	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.35.1.3.1.1.12`
cvAtmPeerCfgDtmfRelay r/w	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.35.1.3.1.1.13`
cvAtmPeerCfgInterfaceName r/w	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.3.1.1.2`
cvAtmPeerCfgVpi r/w	Integer32	`.1.3.6.1.4.1.9.10.35.1.3.1.1.3`
cvAtmPeerCfgVci r/w	Integer32	`.1.3.6.1.4.1.9.10.35.1.3.1.1.4`
cvAtmPeerCfgVcName r/w	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.9.10.35.1.3.1.1.5`
cvAtmPeerCfgCoderRate r/w	CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRate	`.1.3.6.1.4.1.9.10.35.1.3.1.1.6`
cvAtmPeerCfgCodecBytes r/w	Integer32	`.1.3.6.1.4.1.9.10.35.1.3.1.1.7`
cvAtmPeerCfgFaxRate r/w	CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcFaxTransmitRate	`.1.3.6.1.4.1.9.10.35.1.3.1.1.8`
cvAtmPeerCfgFaxBytes r/w	Integer32	`.1.3.6.1.4.1.9.10.35.1.3.1.1.9`
ciscoVoiceAtmDialControlMIBNotificationPrefix		`.1.3.6.1.4.1.9.10.35.2`
ciscoVoiceAtmDialControlMIBNotifications		`.1.3.6.1.4.1.9.10.35.2.0`
ciscoVoiceAtmDialControlMIBConformance		`.1.3.6.1.4.1.9.10.35.3`
ciscoVoiceAtmDialControlMIBCompliances		`.1.3.6.1.4.1.9.10.35.3.1`
ciscoVoiceAtmDialControlMIBGroups		`.1.3.6.1.4.1.9.10.35.3.2`

Dependencies (14) 8 direct · 6 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-VOICE-ATM-DIAL-CONTROL-MIBciscoselected
- CISCO-DIAL-CONTROL-MIBcisco1 symbol
  - CISCO-SMIcisco1 symbol
    - SNMPv2-SMIrfcdefault fallback3 symbols
  - DIAL-CONTROL-MIBrfcdefault fallback1 symbol
    - IANAifType-MIBrfc1 symbol
      - SNMPv2-SMIrfcshared2 symbols
      - SNMPv2-TCrfc1 symbol
        SNMPv2-SMIrfcshared1 symbol
    - IF-MIBrfc4 symbols
      - IANAifType-MIBrfcshared1 symbol
      - SNMPv2-CONFrfc3 symbols
        SNMPv2-SMIrfcshared3 symbols
      - SNMPv2-MIBrfc1 symbol
        SNMPv2-CONFrfcshared3 symbols
        SNMPv2-SMIrfcshared7 symbols
        SNMPv2-TCrfcshared3 symbols
      - SNMPv2-SMIrfcshared9 symbols
      - SNMPv2-TCrfcshared8 symbols
    - RFC1213-MIBrfc1 symbol
      - IANAifType-MIBrfcshared1 symbol
      - RFC-1212rfc1 symbol
      - RFC1155-SMIrfc6 symbols
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared4 symbols
  - IF-MIBrfcdefault fallbackshared1 symbol
  - SNMP-FRAMEWORK-MIBrfcdefault fallback1 symbol
    - SNMPv2-CONFrfcshared2 symbols
    - SNMPv2-SMIrfcshared4 symbols
    - SNMPv2-TCrfcshared1 symbol
  - SNMPv2-CONFrfcdefault fallbackshared2 symbols
  - SNMPv2-SMIrfcdefault fallbackshared3 symbols
  - SNMPv2-TCrfcdefault fallbackshared2 symbols
- CISCO-SMIciscoshared1 symbol
- CISCO-VOICE-COMMON-DIAL-CONTROL-MIBcisco4 symbols
  - CISCO-DIAL-CONTROL-MIBciscoshared1 symbol
  - CISCO-SMIciscoshared1 symbol
  - DIAL-CONTROL-MIBrfcdefault fallbackshared2 symbols
  - SNMP-FRAMEWORK-MIBrfcdefault fallbackshared1 symbol
  - SNMPv2-CONFrfcdefault fallbackshared2 symbols
  - SNMPv2-SMIrfcdefault fallbackshared3 symbols
  - SNMPv2-TCrfcdefault fallbackshared2 symbols
- DIAL-CONTROL-MIBrfcdefault fallbackshared2 symbols
- IF-MIBrfcdefault fallbackshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared2 symbols
- SNMPv2-TCrfcdefault fallbackshared3 symbols

Dependency-first compile order

SNMPv2-SMIrfc
CISCO-SMIcisco
SNMPv2-TCrfc
IANAifType-MIBrfc
SNMPv2-CONFrfc
SNMPv2-MIBrfc
IF-MIBrfc
RFC-1212rfc
RFC1155-SMIrfc
RFC1213-MIBrfc
DIAL-CONTROL-MIBrfc
SNMP-FRAMEWORK-MIBrfc
CISCO-DIAL-CONTROL-MIBcisco
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBcisco
CISCO-VOICE-ATM-DIAL-CONTROL-MIBciscoselected

Type Definitions (1)

CvAtmSessionProtocol	Enumeration	`other(1)` `ciscoSwitched(2)` `aal2Trunk(3)`

Conformance Groups (3)

cvAtmCallHistoryGroup	cvAtmCallHistoryConnectionId cvAtmCallHistoryVpi cvAtmCallHistoryVci cvAtmCallHistoryLowerIfName cvAtmCallHistorySessionTarget cvAtmCallHistorySubchannelID cvAtmCallHistorySessionProtocol cvAtmCallHistoryCalledNumber cvAtmCallHistoryDtmfRelay cvAtmCallHistoryUseSeqNumbers A collection of objects providing the ATM Call History entry capability.	`.1.3.6.1.4.1.9.10.35.3.2.1`
cvAtmCallActiveGroup	cvAtmCallActiveConnectionId cvAtmCallActiveVpi cvAtmCallActiveVci cvAtmCallActiveLowerIfName cvAtmCallActiveSessionTarget cvAtmCallActiveSubchannelID cvAtmCallActiveSessionProtocol cvAtmCallActiveCalledNumber cvAtmCallActiveDtmfRelay cvAtmCallActiveUseSeqNumbers A collection of objects providing the ATM Call Active entry capability.	`.1.3.6.1.4.1.9.10.35.3.2.2`
cvAtmPeerCfgGroup	cvAtmPeerCfgSessionProtocol cvAtmPeerCfgInterfaceName cvAtmPeerCfgVpi cvAtmPeerCfgVci cvAtmPeerCfgVcName cvAtmPeerCfgCoderRate cvAtmPeerCfgCodecBytes cvAtmPeerCfgFaxRate cvAtmPeerCfgFaxBytes cvAtmPeerCfgInBandSignaling cvAtmPeerCfgVADEnable cvAtmPeerCfgUseSeqNumbers cvAtmPeerCfgDtmfRelay A collection of objects providing the ATM Dialpeer capability. These objects have been implemented as read-only.	`.1.3.6.1.4.1.9.10.35.3.2.3`

Compliance Statements (1)

OID .1.3.6.1.4.1.9.10.35.3.1.1

The compliance statement for entities which
implement the CISCO VOICE ATM DIAL CONTROL MIB

Required groups

mandatory	cvAtmCallHistoryGroup
mandatory	cvAtmCallActiveGroup
mandatory	cvAtmPeerCfgGroup

Object refinements

Object	Access	Description
cvAtmPeerCfgSessionProtocol	readonly	Agent implements read-only access at present time
cvAtmPeerCfgInterfaceName	readonly	Agent implements read-only access at present time
cvAtmPeerCfgVpi	readonly	Agent implements read-only access at present time
cvAtmPeerCfgVci	readonly	Agent implements read-only access at present time
cvAtmPeerCfgVcName	readonly	Agent implements read-only access at present time
cvAtmPeerCfgCoderRate	readonly	Agent implements read-only access at present time
cvAtmPeerCfgCodecBytes	readonly	Agent implements read-only access at present time
cvAtmPeerCfgFaxRate	readonly	Agent implements read-only access at present time
cvAtmPeerCfgFaxBytes	readonly	Agent implements read-only access at present time
cvAtmPeerCfgInBandSignaling	readonly	Agent implements read-only access at present time
cvAtmPeerCfgVADEnable	readonly	Agent implements read-only access at present time
cvAtmPeerCfgUseSeqNumbers	readonly	Agent implements read-only access at present time
cvAtmPeerCfgDtmfRelay	readonly	Agent implements read-only access at present time