CISCO-VOA-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
5
cVoaTable
table
.1.3.6.1.4.1.9.9.262.1.1.1
·
1 row entry
·
5 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cVoaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VOA-MIB::cVoaTable'
This table provides objects to configure and control the attenuation on VOAs.
An entry in the cVoaTable provides objects to configure and
control the attenuation level of a VOA at an interface, for
a given direction.
control the attenuation level of a VOA at an interface, for
a given direction.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This is the second index into the cVoaTable and indicates
the direction for which the attenuation level at this interface is being controlled, in this entry. |
CISCO-OPTICAL-MONITOR-MIBOpticalIfDirection Type Values:
|
.1.3.6.1.4.1.9.9.262.1.1.1.1.1 |
||||||
|
This object is used to set the mode of controlling the
attenuation level of a VOA at an interface. When the mode is set to 'manual', the attenuation level is configured manually, by setting the desired at… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.9.9.262.1.1.1.1.2 |
||||||
|
This object indicates the attenuation level applied at the
interface. When the cVoaAttenuationControlMode object is set to 'manual', the attenuation level may be specified by setting this object. |
OpticalAttenInDbr/w Type Constraints: range: 0..400 |
.1.3.6.1.4.1.9.9.262.1.1.1.1.3 |
||||||
|
This object indicates the value of sysUpTime at the last
time the attenuation level was adjusted at this interface, in the given direction. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.9.9.262.1.1.1.1.4 |
||||||
|
This object indicates the desired optical power level,
after attenuation, at the interface. This object applies only when the cVoaAttenuationControlMode object is set to 'automatic'. In this mode, the at… |
OpticalPowerInDbmr/w Type Constraints: range: -1000range: -400..250 |
.1.3.6.1.4.1.9.9.262.1.1.1.1.5 |
