CISCO-USER-CONNECTION-TAP-MIB
This module manages Cisco's intercept feature for
user connections.
This MIB is used along with CISCO-TAP2-MIB to
intercept user traffic. CISCO-TAP2-MIB along with
specific filter MIBs like this MIB replace
CISCO-TAP-MIB.
To create an user connection intercept, an entry
cuctTapStreamEntry is created which contains the filter
details. An entry cTap2StreamEntry of CISCO-TAP2-MIB
is created, which is the common stream information
for all kinds of intercepts and type of the specific
stream is set to userconnection in this entry.
- Source file
CISCO-USER-CONNECTION-TAP-MIB- Last revised
- Identity
ciscoUserConnectionTapMIB- Base OID
1.3.6.1.4.1.9.9.400
Imported Objects
| CISCO-SMI | ciscoMgmt |
| CISCO-TAP2-MIB | cTap2MediationContentId cTap2StreamIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowStatus |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-USER-CONNECTION-TAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-USER-CONNECTION-TAP-MIB::ciscoUserConnectionTapMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-USER-CONNECTION-TAP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-USER-CONNECTION-TAP-MIB::ciscoUserConnectionTapMIB'
Objects (11)
Showing 11 of 11 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.9.9.400 |
||
.1.3.6.1.4.1.9.9.400.1 |
||
.1.3.6.1.4.1.9.9.400.1.1 |
||
|
Bits
|
.1.3.6.1.4.1.9.9.400.1.1.1 |
|
.1.3.6.1.4.1.9.9.400.1.1.2 |
||
.1.3.6.1.4.1.9.9.400.1.1.2.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.9.9.400.1.1.2.1.1 |
|
.1.3.6.1.4.1.9.9.400.1.1.2.1.2 |
||
.1.3.6.1.4.1.9.9.400.2 |
||
.1.3.6.1.4.1.9.9.400.2.1 |
||
.1.3.6.1.4.1.9.9.400.2.2 |
Dependencies (10) 5 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCO-SMIcisco
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- CISCO-TAP2-MIBcisco
- CISCO-USER-CONNECTION-TAP-MIBciscoselected
Conformance Groups (1)
|
These objects are necessary for a description of user
traffic packets to select for interception. |
.1.3.6.1.4.1.9.9.400.2.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.9.9.400.2.1.1The compliance statement for entities which implement the
Cisco Intercept MIB for user connections.
Cisco Intercept MIB for user connections.
Required groups
| mandatory | cuctTapStreamComplianceGroup |